/* * $Id: irq.c,v 1.113 1999/09/17 17:22:56 cort Exp $ * * arch/ppc/kernel/irq.c * * Derived from arch/i386/kernel/irq.c * Copyright (C) 1992 Linus Torvalds * Adapted from arch/i386 by Gary Thomas * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) * Updated and modified by Cort Dougan (cort@cs.nmt.edu) * Copyright (C) 1996 Cort Dougan * Adapted for Power Macintosh by Paul Mackerras * Copyright (C) 1996 Paul Mackerras (paulus@cs.anu.edu.au) * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk). * * This file contains the code used by various IRQ handling routines: * asking for different IRQ's should be done through these routines * instead of just grabbing them. Thus setups with different IRQ numbers * shouldn't result in any weird surprises, and installing new handlers * should be easier. * * The MPC8xx has an interrupt mask in the SIU. If a bit is set, the * interrupt is _enabled_. As expected, IRQ0 is bit 0 in the 32-bit * mask register (of which only 16 are defined), hence the weird shifting * and compliment of the cached_irq_mask. I want to be able to stuff * this right into the SIU SMASK register. * Many of the prep/chrp functions are conditional compiled on CONFIG_8xx * to reduce code space and undefined function references. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "local_irq.h" extern volatile unsigned long ipi_count; void enable_irq(unsigned int irq_nr); void disable_irq(unsigned int irq_nr); volatile unsigned char *chrp_int_ack_special; #define MAXCOUNT 10000000 irq_desc_t irq_desc[NR_IRQS]; int ppc_spurious_interrupts = 0; struct irqaction *ppc_irq_action[NR_IRQS]; unsigned int ppc_cached_irq_mask[NR_MASK_WORDS]; unsigned int ppc_lost_interrupts[NR_MASK_WORDS]; atomic_t ppc_n_lost_interrupts; /* nasty hack for shared irq's since we need to do kmalloc calls but * can't very early in the boot when we need to do a request irq. * this needs to be removed. * -- Cort */ #define IRQ_KMALLOC_ENTRIES 8 static int cache_bitmask = 0; static struct irqaction malloc_cache[IRQ_KMALLOC_ENTRIES]; extern int mem_init_done; void *irq_kmalloc(size_t size, int pri) { unsigned int i; if ( mem_init_done ) return kmalloc(size,pri); for ( i = 0; i < IRQ_KMALLOC_ENTRIES ; i++ ) if ( ! ( cache_bitmask & (1<= NR_IRQS) return -EINVAL; if (!handler) { /* Free */ p = &irq_desc[irq].action; while ((action = *p) != NULL && action->dev_id != dev_id) p = &action->next; if (action == NULL) return -ENOENT; /* Found it - now free it */ save_flags(flags); cli(); *p = action->next; if (irq_desc[irq].action == NULL) disable_irq(irq); restore_flags(flags); irq_kfree(action); return 0; } action = (struct irqaction *) irq_kmalloc(sizeof(struct irqaction), GFP_KERNEL); if (!action) return -ENOMEM; save_flags(flags); cli(); action->handler = handler; action->flags = irqflags; action->mask = 0; action->name = devname; action->dev_id = dev_id; action->next = NULL; enable_irq(irq); p = &irq_desc[irq].action; if ((old = *p) != NULL) { /* Can't share interrupts unless both agree to */ if (!(old->flags & action->flags & SA_SHIRQ)) return -EBUSY; /* add new interrupt at end of irq queue */ do { p = &old->next; old = *p; } while (old); } *p = action; restore_flags(flags); return 0; } #ifdef CONFIG_APUS void sys_free_irq(unsigned int irq, void *dev_id) { sys_request_irq(irq, NULL, 0, NULL, dev_id); } #else void free_irq(unsigned int irq, void *dev_id) { #if (defined(CONFIG_8xx) || defined(CONFIG_8260)) request_8xxirq(irq, NULL, 0, NULL, dev_id); #else request_irq(irq, NULL, 0, NULL, dev_id); #endif } #endif /* XXX should implement irq disable depth like on intel */ void disable_irq_nosync(unsigned int irq_nr) { mask_irq(irq_nr); } void disable_irq(unsigned int irq_nr) { mask_irq(irq_nr); synchronize_irq(); } void enable_irq(unsigned int irq_nr) { unmask_irq(irq_nr); } int get_irq_list(char *buf) { #ifdef CONFIG_APUS return apus_get_irq_list (buf); #else int i, len = 0, j; struct irqaction * action; len += sprintf(buf+len, " "); for (j=0; jhandler ) continue; len += sprintf(buf+len, "%3d: ", i); #ifdef CONFIG_SMP for (j = 0; j < smp_num_cpus; j++) len += sprintf(buf+len, "%10u ", kstat.irqs[cpu_logical_map(j)][i]); #else len += sprintf(buf+len, "%10u ", kstat_irqs(i)); #endif /* CONFIG_SMP */ if ( irq_desc[i].handler ) len += sprintf(buf+len, " %s ", irq_desc[i].handler->typename ); else len += sprintf(buf+len, " None "); len += sprintf(buf+len, "%s", (irq_desc[i].status & IRQ_LEVEL) ? "Level " : "Edge "); len += sprintf(buf+len, " %s",action->name); for (action=action->next; action; action = action->next) { len += sprintf(buf+len, ", %s", action->name); } len += sprintf(buf+len, "\n"); } #ifdef CONFIG_SMP /* should this be per processor send/receive? */ len += sprintf(buf+len, "IPI: %10lu\n", ipi_count); #endif len += sprintf(buf+len, "BAD: %10u\n", ppc_spurious_interrupts); return len; #endif /* CONFIG_APUS */ } /* * Eventually, this should take an array of interrupts and an array size * so it can dispatch multiple interrupts. */ void ppc_irq_dispatch_handler(struct pt_regs *regs, int irq) { int status; struct irqaction *action; int cpu = smp_processor_id(); mask_and_ack_irq(irq); status = 0; action = irq_desc[irq].action; kstat.irqs[cpu][irq]++; if (action && action->handler) { if (!(action->flags & SA_INTERRUPT)) __sti(); do { status |= action->flags; action->handler(irq, action->dev_id, regs); action = action->next; } while ( action ); __cli(); if (irq_desc[irq].handler) { if (irq_desc[irq].handler->end) irq_desc[irq].handler->end(irq); else if (irq_desc[irq].handler->enable) irq_desc[irq].handler->enable(irq); } } else { ppc_spurious_interrupts++; printk(KERN_DEBUG "Unhandled interrupt %x, disabled\n", irq); disable_irq(irq); if (irq_desc[irq].handler->end) irq_desc[irq].handler->end(irq); } } int do_IRQ(struct pt_regs *regs, int isfake) { int cpu = smp_processor_id(); int irq; hardirq_enter( cpu ); /* every arch is required to have a get_irq -- Cort */ irq = ppc_md.get_irq( regs ); if ( irq < 0 ) { /* -2 means ignore, already handled */ if (irq != -2) { printk(KERN_DEBUG "Bogus interrupt %d from PC = %lx\n", irq, regs->nip); ppc_spurious_interrupts++; } goto out; } ppc_irq_dispatch_handler( regs, irq ); if (ppc_md.post_irq) ppc_md.post_irq( regs, irq ); out: hardirq_exit( cpu ); return 1; /* lets ret_from_int know we can do checks */ } unsigned long probe_irq_on (void) { return 0; } int probe_irq_off (unsigned long irqs) { return 0; } void __init init_IRQ(void) { static int once = 0; if ( once ) return; else once++; ppc_md.init_IRQ(); } #ifdef CONFIG_SMP unsigned char global_irq_holder = NO_PROC_ID; unsigned volatile int global_irq_lock; atomic_t global_irq_count; atomic_t global_bh_count; static void show(char * str) { int i; unsigned long *stack; int cpu = smp_processor_id(); printk("\n%s, CPU %d:\n", str, cpu); printk("irq: %d [%d %d]\n", atomic_read(&global_irq_count), local_irq_count(0), local_irq_count(1)); printk("bh: %d [%d %d]\n", atomic_read(&global_bh_count), local_bh_count(0), local_bh_count(1)); stack = (unsigned long *) &str; for (i = 40; i ; i--) { unsigned long x = *++stack; if (x > (unsigned long) &init_task_union && x < (unsigned long) &vsprintf) { printk("<[%08lx]> ", x); } } } static inline void wait_on_bh(void) { int count = MAXCOUNT; do { if (!--count) { show("wait_on_bh"); count = ~0; } /* nothing .. wait for the other bh's to go away */ } while (atomic_read(&global_bh_count) != 0); } static inline void wait_on_irq(int cpu) { int count = MAXCOUNT; for (;;) { /* * Wait until all interrupts are gone. Wait * for bottom half handlers unless we're * already executing in one.. */ if (!atomic_read(&global_irq_count)) { if (local_bh_count(cpu) || !atomic_read(&global_bh_count)) break; } /* Duh, we have to loop. Release the lock to avoid deadlocks */ clear_bit(0,&global_irq_lock); for (;;) { if (!--count) { show("wait_on_irq"); count = ~0; } __sti(); /* don't worry about the lock race Linus found * on intel here. -- Cort */ __cli(); if (atomic_read(&global_irq_count)) continue; if (global_irq_lock) continue; if (!local_bh_count(cpu) && atomic_read(&global_bh_count)) continue; if (!test_and_set_bit(0,&global_irq_lock)) break; } } } /* * This is called when we want to synchronize with * bottom half handlers. We need to wait until * no other CPU is executing any bottom half handler. * * Don't wait if we're already running in an interrupt * context or are inside a bh handler. */ void synchronize_bh(void) { if (atomic_read(&global_bh_count) && !in_interrupt()) wait_on_bh(); } /* * This is called when we want to synchronize with * interrupts. We may for example tell a device to * stop sending interrupts: but to make sure there * are no interrupts that are executing on another * CPU we need to call this function. */ void synchronize_irq(void) { if (atomic_read(&global_irq_count)) { /* Stupid approach */ cli(); sti(); } } static inline void get_irqlock(int cpu) { unsigned int loops = MAXCOUNT; if (test_and_set_bit(0,&global_irq_lock)) { /* do we already hold the lock? */ if ((unsigned char) cpu == global_irq_holder) return; /* Uhhuh.. Somebody else got it. Wait.. */ do { do { if (loops-- == 0) { printk("get_irqlock(%d) waiting, global_irq_holder=%d\n", cpu, global_irq_holder); #ifdef CONFIG_XMON xmon(0); #endif } } while (test_bit(0,&global_irq_lock)); } while (test_and_set_bit(0,&global_irq_lock)); } /* * We also need to make sure that nobody else is running * in an interrupt context. */ wait_on_irq(cpu); /* * Ok, finally.. */ global_irq_holder = cpu; } /* * A global "cli()" while in an interrupt context * turns into just a local cli(). Interrupts * should use spinlocks for the (very unlikely) * case that they ever want to protect against * each other. * * If we already have local interrupts disabled, * this will not turn a local disable into a * global one (problems with spinlocks: this makes * save_flags+cli+sti usable inside a spinlock). */ void __global_cli(void) { unsigned long flags; __save_flags(flags); if (flags & (1 << 15)) { int cpu = smp_processor_id(); __cli(); if (!local_irq_count(cpu)) get_irqlock(cpu); } } void __global_sti(void) { int cpu = smp_processor_id(); if (!local_irq_count(cpu)) release_irqlock(cpu); __sti(); } /* * SMP flags value to restore to: * 0 - global cli * 1 - global sti * 2 - local cli * 3 - local sti */ unsigned long __global_save_flags(void) { int retval; int local_enabled; unsigned long flags; __save_flags(flags); local_enabled = (flags >> 15) & 1; /* default to local */ retval = 2 + local_enabled; /* check for global flags if we're not in an interrupt */ if (!local_irq_count(smp_processor_id())) { if (local_enabled) retval = 1; if (global_irq_holder == (unsigned char) smp_processor_id()) retval = 0; } return retval; } int tb(long vals[], int max_size) { register unsigned long *orig_sp __asm__ ("r1"); register unsigned long lr __asm__ ("r3"); unsigned long *sp; int i; asm volatile ("mflr 3"); vals[0] = lr; sp = (unsigned long *) *orig_sp; sp = (unsigned long *) *sp; for (i=1; i HEX_DIGITS) count = HEX_DIGITS; if (copy_from_user(hexnum, buffer, count)) return -EFAULT; /* * Parse the first 8 characters as a hex string, any non-hex char * is end-of-string. '00e1', 'e1', '00E1', 'E1' are all the same. */ value = 0; for (i = 0; i < count; i++) { unsigned int c = hexnum[i]; switch (c) { case '0' ... '9': c -= '0'; break; case 'a' ... 'f': c -= 'a'-10; break; case 'A' ... 'F': c -= 'A'-10; break; default: goto out; } value = (value << 4) | c; } out: *ret = value; return 0; } static int irq_affinity_write_proc (struct file *file, const char *buffer, unsigned long count, void *data) { int irq = (int) data, full_count = count, err; unsigned long new_value; if (!irq_desc[irq].handler->set_affinity) return -EIO; err = parse_hex_value(buffer, count, &new_value); #if 0/*CONFIG_SMP*/ /* * Do not allow disabling IRQs completely - it's a too easy * way to make the system unusable accidentally :-) At least * one online CPU still has to be targeted. */ if (!(new_value & cpu_online_map)) return -EINVAL; #endif irq_affinity[irq] = new_value; irq_desc[irq].handler->set_affinity(irq, new_value); return full_count; } static int prof_cpu_mask_read_proc (char *page, char **start, off_t off, int count, int *eof, void *data) { unsigned long *mask = (unsigned long *) data; if (count < HEX_DIGITS+1) return -EINVAL; return sprintf (page, "%08lx\n", *mask); } static int prof_cpu_mask_write_proc (struct file *file, const char *buffer, unsigned long count, void *data) { unsigned long *mask = (unsigned long *) data, full_count = count, err; unsigned long new_value; err = parse_hex_value(buffer, count, &new_value); if (err) return err; *mask = new_value; return full_count; } #define MAX_NAMELEN 10 static void register_irq_proc (unsigned int irq) { struct proc_dir_entry *entry; char name [MAX_NAMELEN]; if (!root_irq_dir || (irq_desc[irq].handler == NULL)) return; memset(name, 0, MAX_NAMELEN); sprintf(name, "%d", irq); /* create /proc/irq/1234 */ irq_dir[irq] = proc_mkdir(name, root_irq_dir); /* create /proc/irq/1234/smp_affinity */ entry = create_proc_entry("smp_affinity", 0600, irq_dir[irq]); entry->nlink = 1; entry->data = (void *)irq; entry->read_proc = irq_affinity_read_proc; entry->write_proc = irq_affinity_write_proc; smp_affinity_entry[irq] = entry; } unsigned long prof_cpu_mask = -1; void init_irq_proc (void) { struct proc_dir_entry *entry; int i; /* create /proc/irq */ root_irq_dir = proc_mkdir("irq", 0); /* create /proc/irq/prof_cpu_mask */ entry = create_proc_entry("prof_cpu_mask", 0600, root_irq_dir); entry->nlink = 1; entry->data = (void *)&prof_cpu_mask; entry->read_proc = prof_cpu_mask_read_proc; entry->write_proc = prof_cpu_mask_write_proc; /* * Create entries for all existing IRQs. */ for (i = 0; i < NR_IRQS; i++) { if (irq_desc[i].handler == NULL) continue; register_irq_proc(i); } } void no_action(int irq, void *dev, struct pt_regs *regs) { }