/* * $Id: init.c,v 1.195 1999/10/15 16:39:39 cort Exp $ * * PowerPC version * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) * * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au) * and Cort Dougan (PReP) (cort@cs.nmt.edu) * Copyright (C) 1996 Paul Mackerras * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk). * * Derived from "arch/i386/mm/init.c" * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. * */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef CONFIG_BLK_DEV_INITRD #include /* for initrd_* */ #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "mem_pieces.h" #define PGTOKB(pages) (((pages) * PAGE_SIZE) >> 10) int prom_trashed; atomic_t next_mmu_context; unsigned long *end_of_DRAM; int mem_init_done; int init_bootmem_done; int boot_mapsize; unsigned long totalram_pages = 0; extern pgd_t swapper_pg_dir[]; extern char _start[], _end[]; extern char etext[], _stext[]; extern char __init_begin, __init_end; extern char __prep_begin, __prep_end; extern char __pmac_begin, __pmac_end; extern char __apus_begin, __apus_end; extern char __openfirmware_begin, __openfirmware_end; struct device_node *memory_node; unsigned long ioremap_base; unsigned long ioremap_bot; unsigned long avail_start; extern int num_memory; extern struct mem_info memory[]; extern boot_infos_t *boot_infos; #ifndef __SMP__ struct pgtable_cache_struct quicklists; #endif void MMU_init(void); static void *MMU_get_page(void); unsigned long *prep_find_end_of_memory(void); unsigned long *pmac_find_end_of_memory(void); unsigned long *apus_find_end_of_memory(void); unsigned long *gemini_find_end_of_memory(void); extern unsigned long *find_end_of_memory(void); #ifdef CONFIG_8xx unsigned long *m8xx_find_end_of_memory(void); #endif /* CONFIG_8xx */ static void mapin_ram(void); void map_page(unsigned long va, unsigned long pa, int flags); extern void die_if_kernel(char *,struct pt_regs *,long); extern void show_net_buffers(void); struct mem_pieces phys_mem; extern struct task_struct *current_set[NR_CPUS]; PTE *Hash, *Hash_end; unsigned long Hash_size, Hash_mask; #if !defined(CONFIG_4xx) && !defined(CONFIG_8xx) #ifdef CONFIG_PPC64 unsigned long long _SDR1; #else unsigned long _SDR1; #endif static void hash_init(void); union ubat { /* BAT register values to be loaded */ BAT bat; #ifdef CONFIG_PPC64 u64 word[2]; #else u32 word[2]; #endif } BATS[4][2]; /* 4 pairs of IBAT, DBAT */ struct batrange { /* stores address ranges mapped by BATs */ unsigned long start; unsigned long limit; unsigned long phys; } bat_addrs[4]; /* * Return PA for this VA if it is mapped by a BAT, or 0 */ static inline unsigned long v_mapped_by_bats(unsigned long va) { int b; for (b = 0; b < 4; ++b) if (va >= bat_addrs[b].start && va < bat_addrs[b].limit) return bat_addrs[b].phys + (va - bat_addrs[b].start); return 0; } /* * Return VA for a given PA or 0 if not mapped */ static inline unsigned long p_mapped_by_bats(unsigned long pa) { int b; for (b = 0; b < 4; ++b) if (pa >= bat_addrs[b].phys && pa < (bat_addrs[b].limit-bat_addrs[b].start) +bat_addrs[b].phys) return bat_addrs[b].start+(pa-bat_addrs[b].phys); return 0; } #else /* CONFIG_4xx || CONFIG_8xx */ #define v_mapped_by_bats(x) (0UL) #define p_mapped_by_bats(x) (0UL) #endif /* !CONFIG_4xx && !CONFIG_8xx */ /* * this tells the system to map all of ram with the segregs * (i.e. page tables) instead of the bats. * -- Cort */ int __map_without_bats = 0; /* max amount of RAM to use */ unsigned long __max_memory; void __bad_pte(pmd_t *pmd) { printk("Bad pmd in pte_alloc: %08lx\n", pmd_val(*pmd)); pmd_val(*pmd) = (unsigned long) BAD_PAGETABLE; } pte_t *get_pte_slow(pmd_t *pmd, unsigned long offset) { pte_t *pte; if (pmd_none(*pmd)) { if (!mem_init_done) pte = (pte_t *) MMU_get_page(); else if ((pte = (pte_t *) __get_free_page(GFP_KERNEL))) clear_page(pte); if (pte) { pmd_val(*pmd) = (unsigned long)pte; return pte + offset; } pmd_val(*pmd) = (unsigned long)BAD_PAGETABLE; return NULL; } if (pmd_bad(*pmd)) { __bad_pte(pmd); return NULL; } return (pte_t *) pmd_page(*pmd) + offset; } int do_check_pgt_cache(int low, int high) { int freed = 0; if(pgtable_cache_size > high) { do { if(pgd_quicklist) free_pgd_slow(get_pgd_fast()), freed++; if(pmd_quicklist) free_pmd_slow(get_pmd_fast()), freed++; if(pte_quicklist) free_pte_slow(get_pte_fast()), freed++; } while(pgtable_cache_size > low); } return freed; } /* * BAD_PAGE is the page that is used for page faults when linux * is out-of-memory. Older versions of linux just did a * do_exit(), but using this instead means there is less risk * for a process dying in kernel mode, possibly leaving a inode * unused etc.. * * BAD_PAGETABLE is the accompanying page-table: it is initialized * to point to BAD_PAGE entries. * * ZERO_PAGE is a special page that is used for zero-initialized * data and COW. */ pte_t *empty_bad_page_table; pte_t * __bad_pagetable(void) { clear_page(empty_bad_page_table); return empty_bad_page_table; } void *empty_bad_page; pte_t __bad_page(void) { clear_page(empty_bad_page); return pte_mkdirty(mk_pte_phys(__pa(empty_bad_page), PAGE_SHARED)); } void show_mem(void) { int i,free = 0,total = 0,reserved = 0; int shared = 0, cached = 0; struct task_struct *p; printk("Mem-info:\n"); show_free_areas(); printk("Free swap: %6dkB\n",nr_swap_pages<<(PAGE_SHIFT-10)); i = max_mapnr; while (i-- > 0) { total++; if (PageReserved(mem_map+i)) reserved++; else if (PageSwapCache(mem_map+i)) cached++; else if (!atomic_read(&mem_map[i].count)) free++; else shared += atomic_read(&mem_map[i].count) - 1; } printk("%d pages of RAM\n",total); printk("%d free pages\n",free); printk("%d reserved pages\n",reserved); printk("%d pages shared\n",shared); printk("%d pages swap cached\n",cached); printk("%d pages in page table cache\n",(int)pgtable_cache_size); show_buffers(); #ifdef CONFIG_NET show_net_buffers(); #endif printk("%-8s %3s %8s %8s %8s %9s %8s", "Process", "Pid", "Ctx", "Ctx<<4", "Last Sys", "pc", "task"); #ifdef __SMP__ printk(" %3s", "CPU"); #endif /* __SMP__ */ printk("\n"); for_each_task(p) { printk("%-8.8s %3d %8ld %8ld %8ld %c%08lx %08lx ", p->comm,p->pid, (p->mm)?p->mm->context:0, (p->mm)?(p->mm->context<<4):0, p->thread.last_syscall, (p->thread.regs)?user_mode(p->thread.regs) ? 'u' : 'k' : '?', (p->thread.regs)?p->thread.regs->nip:0, (ulong)p); { int iscur = 0; #ifdef __SMP__ printk("%3d ", p->processor); if ( (p->processor != NO_PROC_ID) && (p == current_set[p->processor]) ) { iscur = 1; printk("current"); } #else if ( p == current ) { iscur = 1; printk("current"); } if ( p == last_task_used_math ) { if ( iscur ) printk(","); printk("last math"); } #endif /* __SMP__ */ printk("\n"); } } } void si_meminfo(struct sysinfo *val) { int i, c; i = max_mapnr; val->totalram = totalram_pages; val->freeram = nr_free_pages(); val->bufferram = atomic_read(&buffermem_pages); val->sharedram = 0; while (i-- > 0) { if (PageReserved(mem_map+i)) continue; c = atomic_read(&mem_map[i].count); if (c > 1) val->sharedram += c - 1; } val->totalhigh = 0; val->freehigh = 0; val->mem_unit = PAGE_SIZE; } void * ioremap(unsigned long addr, unsigned long size) { return __ioremap(addr, size, _PAGE_NO_CACHE); } void * __ioremap(unsigned long addr, unsigned long size, unsigned long flags) { unsigned long p, v, i; /* * Choose an address to map it to. * Once the vmalloc system is running, we use it. * Before then, we map addresses >= ioremap_base * virt == phys; for addresses below this we use * space going down from ioremap_base (ioremap_bot * records where we're up to). */ p = addr & PAGE_MASK; size = PAGE_ALIGN(addr + size) - p; /* * If the address lies within the first 16 MB, assume it's in ISA * memory space */ if (p < 16*1024*1024) p += _ISA_MEM_BASE; /* * Don't allow anybody to remap normal RAM that we're using. * mem_init() sets high_memory so only do the check after that. */ if ( mem_init_done && (p < virt_to_phys(high_memory)) ) { printk("__ioremap(): phys addr %0lx is RAM lr %p\n", p, __builtin_return_address(0)); return NULL; } if (size == 0) return NULL; /* * Is it already mapped? Perhaps overlapped by a previous * BAT mapping. If the whole area is mapped then we're done, * otherwise remap it since we want to keep the virt addrs for * each request contiguous. * * We make the assumption here that if the bottom and top * of the range we want are mapped then it's mapped to the * same virt address (and this is contiguous). * -- Cort */ if ((v = p_mapped_by_bats(p)) /*&& p_mapped_by_bats(p+size-1)*/ ) goto out; if (mem_init_done) { struct vm_struct *area; area = get_vm_area(size, VM_IOREMAP); if (area == 0) return NULL; v = VMALLOC_VMADDR(area->addr); } else { if (p >= ioremap_base) v = p; else v = (ioremap_bot -= size); } if ((flags & _PAGE_PRESENT) == 0) flags |= pgprot_val(PAGE_KERNEL); if (flags & (_PAGE_NO_CACHE | _PAGE_WRITETHRU)) flags |= _PAGE_GUARDED; /* * Is it a candidate for a BAT mapping? */ for (i = 0; i < size; i += PAGE_SIZE) map_page(v+i, p+i, flags); out: return (void *) (v + (addr & ~PAGE_MASK)); } void iounmap(void *addr) { /* XXX todo */ } unsigned long iopa(unsigned long addr) { unsigned long pa; pmd_t *pd; pte_t *pg; /* Check the BATs */ pa = v_mapped_by_bats(addr); if (pa) return pa; /* Do we have a page table? */ if (init_mm.pgd == NULL) return 0; /* Use upper 10 bits of addr to index the first level map */ pd = (pmd_t *) (init_mm.pgd + (addr >> PGDIR_SHIFT)); if (pmd_none(*pd)) return 0; /* Use middle 10 bits of addr to index the second-level map */ pg = pte_offset(pd, addr); return (pte_val(*pg) & PAGE_MASK) | (addr & ~PAGE_MASK); } void map_page(unsigned long va, unsigned long pa, int flags) { pmd_t *pd, oldpd; pte_t *pg; /* Use upper 10 bits of VA to index the first level map */ pd = pmd_offset(pgd_offset_k(va), va); oldpd = *pd; /* Use middle 10 bits of VA to index the second-level map */ pg = pte_alloc(pd, va); if (pmd_none(oldpd) && mem_init_done) set_pgdir(va, *(pgd_t *)pd); set_pte(pg, mk_pte_phys(pa & PAGE_MASK, __pgprot(flags))); flush_hash_page(0, va); } #ifndef CONFIG_8xx /* * TLB flushing: * * - flush_tlb_all() flushes all processes TLBs * - flush_tlb_mm(mm) flushes the specified mm context TLB's * - flush_tlb_page(vma, vmaddr) flushes one page * - flush_tlb_range(mm, start, end) flushes a range of pages * * since the hardware hash table functions as an extension of the * tlb as far as the linux tables are concerned, flush it too. * -- Cort */ /* * Flush all tlb/hash table entries (except perhaps for those * mapping RAM starting at PAGE_OFFSET, since they never change). */ void local_flush_tlb_all(void) { __clear_user(Hash, Hash_size); _tlbia(); } /* * Flush all the (user) entries for the address space described * by mm. We can't rely on mm->mmap describing all the entries * that might be in the hash table. */ void local_flush_tlb_mm(struct mm_struct *mm) { mm->context = NO_CONTEXT; if (mm == current->mm) activate_mm(mm, mm); } void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr) { if (vmaddr < TASK_SIZE) flush_hash_page(vma->vm_mm->context, vmaddr); else flush_hash_page(0, vmaddr); } /* * for each page addr in the range, call MMU_invalidate_page() * if the range is very large and the hash table is small it might be * faster to do a search of the hash table and just invalidate pages * that are in the range but that's for study later. * -- Cort */ void local_flush_tlb_range(struct mm_struct *mm, unsigned long start, unsigned long end) { start &= PAGE_MASK; if (end - start > 20 * PAGE_SIZE) { flush_tlb_mm(mm); return; } for (; start < end && start < TASK_SIZE; start += PAGE_SIZE) { flush_hash_page(mm->context, start); } } /* * The context counter has overflowed. * We set mm->context to NO_CONTEXT for all mm's in the system. * We assume we can get to all mm's by looking as tsk->mm for * all tasks in the system. */ void mmu_context_overflow(void) { struct task_struct *tsk; printk(KERN_DEBUG "mmu_context_overflow\n"); read_lock(&tasklist_lock); for_each_task(tsk) { if (tsk->mm) tsk->mm->context = NO_CONTEXT; } read_unlock(&tasklist_lock); flush_hash_segments(0x10, 0xffffff); atomic_set(&next_mmu_context, 0); /* make sure current always has a context */ current->mm->context = MUNGE_CONTEXT(atomic_inc_return(&next_mmu_context)); set_context(current->mm->context); } #endif /* CONFIG_8xx */ #if !defined(CONFIG_4xx) && !defined(CONFIG_8xx) static void get_mem_prop(char *, struct mem_pieces *); #if defined(CONFIG_PMAC) || defined(CONFIG_CHRP) || defined(CONFIG_ALL_PPC) /* * Read in a property describing some pieces of memory. */ static void __init get_mem_prop(char *name, struct mem_pieces *mp) { struct reg_property *rp; int s; rp = (struct reg_property *) get_property(memory_node, name, &s); if (rp == NULL) { printk(KERN_ERR "error: couldn't get %s property on /memory\n", name); abort(); } mp->n_regions = s / sizeof(mp->regions[0]); memcpy(mp->regions, rp, s); /* Make sure the pieces are sorted. */ mem_pieces_sort(mp); mem_pieces_coalesce(mp); } #endif /* CONFIG_PMAC || CONFIG_CHRP || CONFIG_ALL_PPC */ /* * Set up one of the I/D BAT (block address translation) register pairs. * The parameters are not checked; in particular size must be a power * of 2 between 128k and 256M. */ void __init setbat(int index, unsigned long virt, unsigned long phys, unsigned int size, int flags) { unsigned int bl; int wimgxpp; union ubat *bat = BATS[index]; bl = (size >> 17) - 1; if ((_get_PVR() >> 16) != 1) { /* 603, 604, etc. */ /* Do DBAT first */ wimgxpp = flags & (_PAGE_WRITETHRU | _PAGE_NO_CACHE | _PAGE_COHERENT | _PAGE_GUARDED); wimgxpp |= (flags & _PAGE_RW)? BPP_RW: BPP_RX; bat[1].word[0] = virt | (bl << 2) | 2; /* Vs=1, Vp=0 */ bat[1].word[1] = phys | wimgxpp; if (flags & _PAGE_USER) bat[1].bat.batu.vp = 1; if (flags & _PAGE_GUARDED) { /* G bit must be zero in IBATs */ bat[0].word[0] = bat[0].word[1] = 0; } else { /* make IBAT same as DBAT */ bat[0] = bat[1]; } } else { /* 601 cpu */ if (bl > BL_8M) bl = BL_8M; wimgxpp = flags & (_PAGE_WRITETHRU | _PAGE_NO_CACHE | _PAGE_COHERENT); wimgxpp |= (flags & _PAGE_RW)? ((flags & _PAGE_USER)? PP_RWRW: PP_RWXX): PP_RXRX; bat->word[0] = virt | wimgxpp | 4; /* Ks=0, Ku=1 */ bat->word[1] = phys | bl | 0x40; /* V=1 */ } bat_addrs[index].start = virt; bat_addrs[index].limit = virt + ((bl + 1) << 17) - 1; bat_addrs[index].phys = phys; } #define IO_PAGE (_PAGE_NO_CACHE | _PAGE_GUARDED | _PAGE_RW) #ifdef __SMP__ #define RAM_PAGE (_PAGE_RW|_PAGE_COHERENT) #else #define RAM_PAGE (_PAGE_RW) #endif #endif /* CONFIG_8xx */ /* * Map in all of physical memory starting at KERNELBASE. */ #define PAGE_KERNEL_RO __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED) static void __init mapin_ram(void) { int i; unsigned long v, p, s, f; #ifndef CONFIG_8xx if (!__map_without_bats) { unsigned long tot, mem_base, bl, done; unsigned long max_size = (256<<20); unsigned long align; /* Set up BAT2 and if necessary BAT3 to cover RAM. */ mem_base = __pa(KERNELBASE); /* Make sure we don't map a block larger than the smallest alignment of the physical address. */ /* alignment of mem_base */ align = ~(mem_base-1) & mem_base; /* set BAT block size to MIN(max_size, align) */ if (align && align < max_size) max_size = align; tot = (unsigned long)end_of_DRAM - KERNELBASE; for (bl = 128<<10; bl < max_size; bl <<= 1) { if (bl * 2 > tot) break; } setbat(2, KERNELBASE, mem_base, bl, RAM_PAGE); done = (unsigned long)bat_addrs[2].limit - KERNELBASE + 1; if ((done < tot) && !bat_addrs[3].limit) { /* use BAT3 to cover a bit more */ tot -= done; for (bl = 128<<10; bl < max_size; bl <<= 1) if (bl * 2 > tot) break; setbat(3, KERNELBASE+done, mem_base+done, bl, RAM_PAGE); } } #endif /* CONFIG_8xx */ for (i = 0; i < phys_mem.n_regions; ++i) { v = (ulong)__va(phys_mem.regions[i].address); p = phys_mem.regions[i].address; for (s = 0; s < phys_mem.regions[i].size; s += PAGE_SIZE) { /* On the MPC8xx, we want the page shared so we * don't get ASID compares on kernel space. */ f = _PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_SHARED; if ((char *) v < _stext || (char *) v >= etext) f |= _PAGE_RW | _PAGE_DIRTY | _PAGE_HWWRITE; #ifndef CONFIG_8xx else /* On the powerpc, denying user access forces R/W kernel access */ f |= _PAGE_USER; #endif /* CONFIG_8xx */ map_page(v, p, f); v += PAGE_SIZE; p += PAGE_SIZE; } } } /* In fact this is only called until mem_init is done. */ static void __init *MMU_get_page(void) { void *p; if (mem_init_done) { p = (void *) __get_free_page(GFP_KERNEL); } else if (init_bootmem_done) { p = alloc_bootmem_pages(PAGE_SIZE); } else { p = mem_pieces_find(PAGE_SIZE, PAGE_SIZE); } if (p == 0) panic("couldn't get a page in MMU_get_page"); __clear_user(p, PAGE_SIZE); return p; } void __init free_initmem(void) { unsigned long a; unsigned long num_freed_pages = 0, num_prep_pages = 0, num_pmac_pages = 0, num_openfirmware_pages = 0, num_apus_pages = 0; #define FREESEC(START,END,CNT) do { \ a = (unsigned long)(&START); \ for (; a < (unsigned long)(&END); a += PAGE_SIZE) { \ clear_bit(PG_reserved, &mem_map[MAP_NR(a)].flags); \ set_page_count(mem_map+MAP_NR(a), 1); \ free_page(a); \ CNT++; \ } \ } while (0) FREESEC(__init_begin,__init_end,num_freed_pages); switch (_machine) { case _MACH_Pmac: FREESEC(__apus_begin,__apus_end,num_apus_pages); FREESEC(__prep_begin,__prep_end,num_prep_pages); break; case _MACH_chrp: FREESEC(__apus_begin,__apus_end,num_apus_pages); FREESEC(__pmac_begin,__pmac_end,num_pmac_pages); FREESEC(__prep_begin,__prep_end,num_prep_pages); break; case _MACH_prep: FREESEC(__apus_begin,__apus_end,num_apus_pages); FREESEC(__pmac_begin,__pmac_end,num_pmac_pages); break; case _MACH_mbx: FREESEC(__apus_begin,__apus_end,num_apus_pages); FREESEC(__pmac_begin,__pmac_end,num_pmac_pages); FREESEC(__prep_begin,__prep_end,num_prep_pages); break; case _MACH_apus: FREESEC(__pmac_begin,__pmac_end,num_pmac_pages); FREESEC(__prep_begin,__prep_end,num_prep_pages); break; case _MACH_gemini: FREESEC(__apus_begin,__apus_end,num_apus_pages); FREESEC(__pmac_begin,__pmac_end,num_pmac_pages); FREESEC(__prep_begin,__prep_end,num_prep_pages); break; } if ( !have_of ) FREESEC( __openfirmware_begin, __openfirmware_end, num_openfirmware_pages ); printk ("Freeing unused kernel memory: %ldk init", PGTOKB(num_freed_pages)); if ( num_prep_pages ) printk(" %ldk prep", PGTOKB(num_prep_pages)); if ( num_pmac_pages ) printk(" %ldk pmac", PGTOKB(num_pmac_pages)); if ( num_openfirmware_pages ) printk(" %ldk open firmware", PGTOKB(num_openfirmware_pages)); if ( num_apus_pages ) printk(" %ldk apus", PGTOKB(num_apus_pages)); printk("\n"); } #ifdef CONFIG_BLK_DEV_INITRD void free_initrd_mem(unsigned long start, unsigned long end) { for (; start < end; start += PAGE_SIZE) { ClearPageReserved(mem_map + MAP_NR(start)); set_page_count(mem_map+MAP_NR(start), 1); free_page(start); totalram_pages++; } printk ("Freeing initrd memory: %ldk freed\n", (end - start) >> 10); } #endif /* * Do very early mm setup such as finding the size of memory * and setting up the hash table. * A lot of this is prep/pmac specific but a lot of it could * still be merged. * -- Cort */ void __init MMU_init(void) { if ( ppc_md.progress ) ppc_md.progress("MMU:enter", 0x111); #ifndef CONFIG_8xx if (have_of) end_of_DRAM = pmac_find_end_of_memory(); #ifdef CONFIG_APUS else if (_machine == _MACH_apus ) end_of_DRAM = apus_find_end_of_memory(); #endif #ifdef CONFIG_GEMINI else if ( _machine == _MACH_gemini ) end_of_DRAM = gemini_find_end_of_memory(); #endif /* CONFIG_GEMINI */ else /* prep */ end_of_DRAM = prep_find_end_of_memory(); if ( ppc_md.progress ) ppc_md.progress("MMU:hash init", 0x300); hash_init(); _SDR1 = __pa(Hash) | (Hash_mask >> 10); ioremap_base = 0xf8000000; if ( ppc_md.progress ) ppc_md.progress("MMU:mapin", 0x301); /* Map in all of RAM starting at KERNELBASE */ mapin_ram(); /* * Setup the bat mappings we're going to load that cover * the io areas. RAM was mapped by mapin_ram(). * -- Cort */ if ( ppc_md.progress ) ppc_md.progress("MMU:setbat", 0x302); switch (_machine) { case _MACH_prep: setbat(0, 0x80000000, 0x80000000, 0x10000000, IO_PAGE); setbat(1, 0xf0000000, 0xc0000000, 0x08000000, IO_PAGE); ioremap_base = 0xf0000000; break; case _MACH_chrp: setbat(0, 0xf8000000, 0xf8000000, 0x08000000, IO_PAGE); setbat(1, 0x80000000, 0x80000000, 0x10000000, IO_PAGE); setbat(3, 0x90000000, 0x90000000, 0x10000000, IO_PAGE); break; case _MACH_Pmac: #if 1 { unsigned long base = 0xf3000000; struct device_node *macio = find_devices("mac-io"); if (macio && macio->n_addrs) base = macio->addrs[0].address; setbat(0, base, base, 0x100000, IO_PAGE); } #endif ioremap_base = 0xf0000000; break; case _MACH_apus: /* Map PPC exception vectors. */ setbat(0, 0xfff00000, 0xfff00000, 0x00020000, RAM_PAGE); /* Map chip and ZorroII memory */ setbat(1, zTwoBase, 0x00000000, 0x01000000, IO_PAGE); break; case _MACH_gemini: setbat(0, 0xf0000000, 0xf0000000, 0x10000000, IO_PAGE); setbat(1, 0x80000000, 0x80000000, 0x10000000, IO_PAGE); break; } ioremap_bot = ioremap_base; #else /* CONFIG_8xx */ end_of_DRAM = m8xx_find_end_of_memory(); /* Map in all of RAM starting at KERNELBASE */ mapin_ram(); /* Now map in some of the I/O space that is generically needed * or shared with multiple devices. * All of this fits into the same 4Mbyte region, so it only * requires one page table page. */ ioremap(IMAP_ADDR, IMAP_SIZE); #ifdef CONFIG_MBX ioremap(NVRAM_ADDR, NVRAM_SIZE); ioremap(MBX_CSR_ADDR, MBX_CSR_SIZE); ioremap(PCI_CSR_ADDR, PCI_CSR_SIZE); /* Map some of the PCI/ISA I/O space to get the IDE interface. */ ioremap(PCI_ISA_IO_ADDR, 0x4000); ioremap(PCI_IDE_ADDR, 0x4000); #endif #ifdef CONFIG_RPXLITE ioremap(RPX_CSR_ADDR, RPX_CSR_SIZE); ioremap(HIOX_CSR_ADDR, HIOX_CSR_SIZE); #endif #ifdef CONFIG_RPXCLASSIC ioremap(PCI_CSR_ADDR, PCI_CSR_SIZE); ioremap(RPX_CSR_ADDR, RPX_CSR_SIZE); #endif #endif /* CONFIG_8xx */ if ( ppc_md.progress ) ppc_md.progress("MMU:exit", 0x211); } /* * Initialize the bootmem system and give it all the memory we * have available. */ void __init do_init_bootmem(void) { unsigned long start, size; int i; /* * Find an area to use for the bootmem bitmap. * We look for the first area which is at least * 128kB in length (128kB is enough for a bitmap * for 4GB of memory, using 4kB pages), plus 1 page * (in case the address isn't page-aligned). */ start = 0; size = 0; for (i = 0; i < phys_avail.n_regions; ++i) { unsigned long a = phys_avail.regions[i].address; unsigned long s = phys_avail.regions[i].size; if (s <= size) continue; start = a; size = s; if (s >= 33 * PAGE_SIZE) break; } start = PAGE_ALIGN(start); boot_mapsize = init_bootmem(start >> PAGE_SHIFT, __pa(end_of_DRAM) >> PAGE_SHIFT); /* remove the bootmem bitmap from the available memory */ mem_pieces_remove(&phys_avail, start, boot_mapsize, 1); /* add everything in phys_avail into the bootmem map */ for (i = 0; i < phys_avail.n_regions; ++i) free_bootmem(phys_avail.regions[i].address, phys_avail.regions[i].size); init_bootmem_done = 1; } #if 0 /* * Find some memory for setup_arch to return. * We use the largest chunk of available memory as the area * that setup_arch returns, making sure that there are at * least 32 pages unused before this for MMU_get_page to use. */ unsigned long __init find_available_memory(void) { int i, rn; unsigned long a, free; unsigned long start, end; if (_machine == _MACH_mbx) { /* Return the first, not the last region, because we * may not yet have properly initialized the additonal * memory DIMM. */ a = PAGE_ALIGN(phys_avail.regions[0].address); avail_start = (unsigned long) __va(a); return avail_start; } rn = 0; for (i = 1; i < phys_avail.n_regions; ++i) if (phys_avail.regions[i].size > phys_avail.regions[rn].size) rn = i; free = 0; for (i = 0; i < rn; ++i) { start = phys_avail.regions[i].address; end = start + phys_avail.regions[i].size; free += (end & PAGE_MASK) - PAGE_ALIGN(start); } a = PAGE_ALIGN(phys_avail.regions[rn].address); if (free < 32 * PAGE_SIZE) a += 32 * PAGE_SIZE - free; avail_start = (unsigned long) __va(a); return avail_start; } #endif /* 0 */ /* * paging_init() sets up the page tables - in fact we've already done this. */ void __init paging_init(void) { /* * Grab some memory for bad_page and bad_pagetable to use. */ empty_bad_page = alloc_bootmem_pages(PAGE_SIZE); empty_bad_page_table = alloc_bootmem_pages(PAGE_SIZE); { unsigned int zones_size[MAX_NR_ZONES], i; /* * All pages are DMA-able so this is wrong - the zone code is * assuming both regions have a value so this is necessary for * now. * -- Cort */ #if 1 for ( i = 1; i < MAX_NR_ZONES; i++ ) zones_size[i] = 1<> PAGE_SHIFT) - ((MAX_NR_ZONES-1)*(1<> PAGE_SHIFT; #endif free_area_init(zones_size); } } void __init mem_init(void) { unsigned long addr; int codepages = 0; int datapages = 0; int initpages = 0; #if defined(CONFIG_CHRP) || defined(CONFIG_PMAC) || defined(CONFIG_ALL_PPC) extern unsigned int rtas_data, rtas_size; #endif /* CONFIG_CHRP || CONFIG_PMAC || CONFIG_ALL_PPC */ max_mapnr = max_low_pfn; high_memory = (void *) __va(max_low_pfn * PAGE_SIZE); num_physpages = max_mapnr; /* RAM is assumed contiguous */ totalram_pages += free_all_bootmem(); #ifdef CONFIG_BLK_DEV_INITRD /* if we are booted from BootX with an initial ramdisk, make sure the ramdisk pages aren't reserved. */ if (initrd_start) { for (addr = initrd_start; addr < initrd_end; addr += PAGE_SIZE) clear_bit(PG_reserved, &mem_map[MAP_NR(addr)].flags); } #endif /* CONFIG_BLK_DEV_INITRD */ #if defined(CONFIG_CHRP) || defined(CONFIG_PMAC) || defined(CONFIG_ALL_PPC) /* mark the RTAS pages as reserved */ if ( rtas_data ) for (addr = rtas_data; addr < PAGE_ALIGN(rtas_data+rtas_size) ; addr += PAGE_SIZE) SetPageReserved(mem_map + MAP_NR(addr)); #endif /* CONFIG_CHRP || CONFIG_PMAC || CONFIG_ALL_PPC */ for (addr = PAGE_OFFSET; addr < (unsigned long)end_of_DRAM; addr += PAGE_SIZE) { if (!PageReserved(mem_map + MAP_NR(addr))) continue; if (addr < (ulong) etext) codepages++; else if (addr >= (unsigned long)&__init_begin && addr < (unsigned long)&__init_end) initpages++; else datapages++; } printk("Memory: %luk available (%dk kernel code, %dk data, %dk init) [%08x,%08lx]\n", (unsigned long) nr_free_pages() << (PAGE_SHIFT-10), codepages << (PAGE_SHIFT-10), datapages << (PAGE_SHIFT-10), initpages << (PAGE_SHIFT-10), PAGE_OFFSET, (unsigned long) end_of_DRAM); mem_init_done = 1; } #if !defined(CONFIG_4xx) && !defined(CONFIG_8xx) #if defined(CONFIG_PMAC) || defined(CONFIG_CHRP) || defined(CONFIG_ALL_PPC) /* * On systems with Open Firmware, collect information about * physical RAM and which pieces are already in use. * At this point, we have (at least) the first 8MB mapped with a BAT. * Our text, data, bss use something over 1MB, starting at 0. * Open Firmware may be using 1MB at the 4MB point. */ unsigned long __init *pmac_find_end_of_memory(void) { unsigned long a, total; /* max amount of RAM we allow -- Cort */ #define RAM_LIMIT (768<<20) memory_node = find_devices("memory"); if (memory_node == NULL) { printk(KERN_ERR "can't find memory node\n"); abort(); } /* * Find out where physical memory is, and check that it * starts at 0 and is contiguous. It seems that RAM is * always physically contiguous on Power Macintoshes, * because MacOS can't cope if it isn't. * * Supporting discontiguous physical memory isn't hard, * it just makes the virtual <-> physical mapping functions * more complicated (or else you end up wasting space * in mem_map). */ get_mem_prop("reg", &phys_mem); if (phys_mem.n_regions == 0) panic("No RAM??"); a = phys_mem.regions[0].address; if (a != 0) panic("RAM doesn't start at physical address 0"); /* * XXX: * Make sure ram mappings don't stomp on IO space * This is a temporary hack to keep this from happening * until we move the KERNELBASE and can allocate RAM up * to our nearest IO area. * -- Cort */ if (__max_memory == 0 || __max_memory > RAM_LIMIT) __max_memory = RAM_LIMIT; if (phys_mem.regions[0].size >= __max_memory) { phys_mem.regions[0].size = __max_memory; phys_mem.n_regions = 1; } total = phys_mem.regions[0].size; if (phys_mem.n_regions > 1) { printk("RAM starting at 0x%x is not contiguous\n", phys_mem.regions[1].address); printk("Using RAM from 0 to 0x%lx\n", total-1); phys_mem.n_regions = 1; } set_phys_avail(&phys_mem); #undef RAM_LIMIT return __va(total); } #endif /* CONFIG_PMAC || CONFIG_CHRP || CONFIG_ALL_PPC */ #if defined(CONFIG_PREP) || defined(CONFIG_ALL_PPC) /* * This finds the amount of physical ram and does necessary * setup for prep. This is pretty architecture specific so * this will likely stay separate from the pmac. * -- Cort */ unsigned long __init *prep_find_end_of_memory(void) { unsigned long total; total = res->TotalMemory; if (total == 0 ) { /* * I need a way to probe the amount of memory if the residual * data doesn't contain it. -- Cort */ printk("Ramsize from residual data was 0 -- Probing for value\n"); total = 0x02000000; printk("Ramsize default to be %ldM\n", total>>20); } mem_pieces_append(&phys_mem, 0, total); set_phys_avail(&phys_mem); return (__va(total)); } #endif /* defined(CONFIG_PREP) || defined(CONFIG_ALL_PPC) */ #if defined(CONFIG_GEMINI) unsigned long __init *gemini_find_end_of_memory(void) { unsigned long total, *ret; unsigned char reg; reg = readb(GEMINI_MEMCFG); total = ((1<<((reg & 0x7) - 1)) * (8<<((reg >> 3) & 0x7))); total *= (1024*1024); phys_mem.regions[0].address = 0; phys_mem.regions[0].size = total; phys_mem.n_regions = 1; ret = __va(phys_mem.regions[0].size); set_phys_avail(&phys_mem); return ret; } #endif /* defined(CONFIG_GEMINI) */ #ifdef CONFIG_APUS #define HARDWARE_MAPPED_SIZE (512*1024) unsigned long __init *apus_find_end_of_memory(void) { int shadow = 0; /* The memory size reported by ADOS excludes the 512KB reserved for PPC exception registers and possibly 512KB containing a shadow of the ADOS ROM. */ { unsigned long size = memory[0].size; /* If 2MB aligned, size was probably user specified. We can't tell anything about shadowing in this case so skip shadow assignment. */ if (0 != (size & 0x1fffff)){ /* Align to 512KB to ensure correct handling of both memfile and system specified sizes. */ size = ((size+0x0007ffff) & 0xfff80000); /* If memory is 1MB aligned, assume shadowing. */ shadow = !(size & 0x80000); } /* Add the chunk that ADOS does not see. by aligning the size to the nearest 2MB limit upwards. */ memory[0].size = ((size+0x001fffff) & 0xffe00000); } /* Now register the memory block. */ mem_pieces_append(&phys_mem, memory[0].addr, memory[0].size); set_phys_avail(&phys_mem); /* Remove the memory chunks that are controlled by special Phase5 hardware. */ { unsigned long top = memory[0].addr + memory[0].size; /* Remove the upper 512KB if it contains a shadow of the ADOS ROM. FIXME: It might be possible to disable this shadow HW. Check the booter (ppc_boot.c) */ if (shadow) { top -= HARDWARE_MAPPED_SIZE; mem_pieces_remove(&phys_avail, top, HARDWARE_MAPPED_SIZE, 0); } /* Remove the upper 512KB where the PPC exception vectors are mapped. */ top -= HARDWARE_MAPPED_SIZE; #if 0 /* This would be neat, but it breaks on A3000 machines!? */ mem_pieces_remove(&phys_avail, top, 16384, 0); #else mem_pieces_remove(&phys_avail, top, HARDWARE_MAPPED_SIZE, 0); #endif } /* Linux/APUS only handles one block of memory -- the one on the PowerUP board. Other system memory is horrible slow in comparison. The user can use other memory for swapping using the z2ram device. */ return __va(memory[0].addr + memory[0].size); } #endif /* CONFIG_APUS */ /* * Initialize the hash table and patch the instructions in head.S. */ static void __init hash_init(void) { int Hash_bits; unsigned long h, ramsize; extern unsigned int hash_page_patch_A[], hash_page_patch_B[], hash_page_patch_C[], hash_page[]; if ( ppc_md.progress ) ppc_md.progress("hash:enter", 0x105); /* * Allow 64k of hash table for every 16MB of memory, * up to a maximum of 2MB. */ ramsize = (ulong)end_of_DRAM - KERNELBASE; #ifdef CONFIG_PPC64 Hash_mask = 0; for (h = 256<<10; h < ramsize / 256 && h < 4<<20; h *= 2, Hash_mask++) ; Hash_size = h; Hash_mask <<= 10; /* so setting _SDR1 works the same -- Cort */ #else for (h = 64<<10; h < ramsize / 256 && h < 2<<20; h *= 2) ; Hash_size = h; Hash_mask = (h >> 6) - 1; #endif /* shrink the htab since we don't use it on 603's -- Cort */ switch (_get_PVR()>>16) { case 3: /* 603 */ case 6: /* 603e */ case 7: /* 603ev */ Hash_size = 0; Hash_mask = 0; break; default: /* on 601/4 let things be */ break; } if ( ppc_md.progress ) ppc_md.progress("hash:find piece", 0x322); /* Find some memory for the hash table. */ if ( Hash_size ) Hash = mem_pieces_find(Hash_size, Hash_size); else Hash = 0; printk("Total memory = %ldMB; using %ldkB for hash table (at %p)\n", ramsize >> 20, Hash_size >> 10, Hash); if ( Hash_size ) { if ( ppc_md.progress ) ppc_md.progress("hash:patch", 0x345); Hash_end = (PTE *) ((unsigned long)Hash + Hash_size); __clear_user(Hash, Hash_size); /* * Patch up the instructions in head.S:hash_page */ Hash_bits = ffz(~Hash_size) - 6; hash_page_patch_A[0] = (hash_page_patch_A[0] & ~0xffff) | (__pa(Hash) >> 16); hash_page_patch_A[1] = (hash_page_patch_A[1] & ~0x7c0) | ((26 - Hash_bits) << 6); if (Hash_bits > 16) Hash_bits = 16; hash_page_patch_A[2] = (hash_page_patch_A[2] & ~0x7c0) | ((26 - Hash_bits) << 6); hash_page_patch_B[0] = (hash_page_patch_B[0] & ~0xffff) | (Hash_mask >> 10); hash_page_patch_C[0] = (hash_page_patch_C[0] & ~0xffff) | (Hash_mask >> 10); #if 0 /* see hash_page in head.S, note also patch_C ref below */ hash_page_patch_D[0] = (hash_page_patch_D[0] & ~0xffff) | (Hash_mask >> 10); #endif /* * Ensure that the locations we've patched have been written * out from the data cache and invalidated in the instruction * cache, on those machines with split caches. */ flush_icache_range((unsigned long) &hash_page_patch_A[0], (unsigned long) &hash_page_patch_C[1]); } else { Hash_end = 0; /* * Put a blr (procedure return) instruction at the * start of hash_page, since we can still get DSI * exceptions on a 603. */ hash_page[0] = 0x4e800020; flush_icache_range((unsigned long) &hash_page[0], (unsigned long) &hash_page[1]); } if ( ppc_md.progress ) ppc_md.progress("hash:done", 0x205); } #else /* CONFIG_8xx */ /* * This is a big hack right now, but it may turn into something real * someday. * * For the 8xx boards (at this time anyway), there is nothing to initialize * associated the PROM. Rather than include all of the prom.c * functions in the image just to get prom_init, all we really need right * now is the initialization of the physical memory region. */ unsigned long __init *m8xx_find_end_of_memory(void) { bd_t *binfo; unsigned long *ret; extern unsigned char __res[]; binfo = (bd_t *)__res; phys_mem.regions[0].address = 0; phys_mem.regions[0].size = binfo->bi_memsize; phys_mem.n_regions = 1; ret = __va(phys_mem.regions[0].address+ phys_mem.regions[0].size); set_phys_avail(&phys_mem); return ret; } #endif /* ndef CONFIG_8xx */