/*
 *  arch/s390/kernel/reipl.S
 *
 *  S390 version
 *    Copyright (C) 2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
 *    Author(s): Holger Smolinski (Holger.Smolinski@de.ibm.com)
	         Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com)
 */

#include <asm/lowcore.h>
		.globl	do_reipl
do_reipl:	basr	%r13,0
.Lpg0:		lpswe   .Lnewpsw-.Lpg0(%r13)
.Lpg1:		lctlg	%c6,%c6,.Lall-.Lpg0(%r13)
                stctg   %c0,%c0,.Lctlsave-.Lpg0(%r13)
                ni      .Lctlsave+4-.Lpg0(%r13),0xef
                lctlg   %c0,%c0,.Lctlsave-.Lpg0(%r13)
                lgr     %r1,%r2
        	mvc     __LC_PGM_NEW_PSW(16),.Lpcnew-.Lpg0(%r13)
                stsch   .Lschib-.Lpg0(%r13)                                    
	        oi      .Lschib+5-.Lpg0(%r13),0x84 
.Lecs:  	xi      .Lschib+27-.Lpg0(%r13),0x01 
        	msch    .Lschib-.Lpg0(%r13) 
		ssch	.Liplorb-.Lpg0(%r13)           
		jz	.L001   
		bas	%r14,.Ldisab-.Lpg0(%r13)
.L001:		mvc	__LC_IO_NEW_PSW(16),.Lionew-.Lpg0(%r13)	
.Ltpi:		lpswe	.Lwaitpsw-.Lpg0(%r13)          
.Lcont:		c	%r1,__LC_SUBCHANNEL_ID
		jnz	.Ltpi
		clc	__LC_IO_INT_PARM(4),.Liplorb-.Lpg0(%r13)
		jnz	.Ltpi
		tsch	.Liplirb-.Lpg0(%r13)           
		tm	.Liplirb+9-.Lpg0(%r13),0xbf
                jz      .L002
                bas     %r14,.Ldisab-.Lpg0(%r13)    
.L002:		tm	.Liplirb+8-.Lpg0(%r13),0xf3    
                jz      .L003
                bas     %r14,.Ldisab-.Lpg0(%r13)	
.L003:		spx	.Lnull-.Lpg0(%r13)
		st 	%r1,__LC_SUBCHANNEL_ID
                lhi     %r1,0            # mode 0 = esa
                slr     %r0,%r0          # set cpuid to zero
                sigp    %r1,%r0,0x12     # switch to esa mode
                lpsw 	0
.Ldisab:	sll    %r14,1
		srl    %r14,1            # need to kill hi bit to avoid specification exceptions.
		st     %r14,.Ldispsw+12-.Lpg0(%r13)
		lpswe	.Ldispsw-.Lpg0(%r13)
                .align 	8
.Lall:		.quad	0x00000000ff000000
.Lctlsave:      .quad   0x0000000000000000
.Lnull:		.long   0x0000000000000000
                .align 	16
/*
 * These addresses have to be 31 bit otherwise
 * the sigp will throw a specifcation exception
 * when switching to ESA mode as bit 31 be set
 * in the ESA psw.
 * Bit 31 of the addresses has to be 0 for the
 * 31bit lpswe instruction a fact they appear to have
 * ommited from the pop.
 */
.Lnewpsw:	.quad   0x0000000080000000
		.quad   .Lpg1
.Lpcnew:	.quad   0x0000000080000000
	  	.quad   .Lecs
.Lionew:	.quad   0x0000000080000000
		.quad   .Lcont
.Lwaitpsw:	.quad	0x0202000080000000
		.quad   .Ltpi
.Ldispsw:	.quad   0x0002000080000000
		.quad   0x0000000000000000
.Liplccws:	.long   0x02000000,0x60000018
		.long   0x08000008,0x20000001
.Liplorb:	.long	0x0049504c,0x0000ff80
		.long	0x00000000+.Liplccws
.Lschib:        .long   0x00000000,0x00000000
		.long   0x00000000,0x00000000
		.long   0x00000000,0x00000000
		.long   0x00000000,0x00000000
		.long   0x00000000,0x00000000
		.long   0x00000000,0x00000000
.Liplirb:	.long	0x00000000,0x00000000
		.long	0x00000000,0x00000000
		.long	0x00000000,0x00000000
		.long	0x00000000,0x00000000
		.long	0x00000000,0x00000000
		.long	0x00000000,0x00000000
		.long	0x00000000,0x00000000
		.long	0x00000000,0x00000000