# $Id: config.in,v 1.78 1999/09/06 01:17:28 davem Exp $
# For a description of the syntax of this configuration file,
# see the Configure script.
#
mainmenu_name "Linux/UltraSPARC Kernel Configuration"

mainmenu_option next_comment
comment 'Code maturity level options'
bool 'Prompt for development and/or incomplete code/drivers' CONFIG_EXPERIMENTAL
endmenu

mainmenu_option next_comment
comment 'General setup'

define_bool CONFIG_VT y
define_bool CONFIG_VT_CONSOLE y

bool 'Symmetric multi-processing support' CONFIG_SMP

mainmenu_option next_comment
comment 'Console drivers'
bool 'PROM console' CONFIG_PROM_CONSOLE
bool 'Support Frame buffer devices' CONFIG_FB
source drivers/video/Config.in
endmenu

# Global things across all Sun machines.
define_bool CONFIG_SBUS y
define_bool CONFIG_SBUSCHAR y
define_bool CONFIG_BUSMOUSE y
define_bool CONFIG_SUN_MOUSE y
define_bool CONFIG_SERIAL y
define_bool CONFIG_SUN_SERIAL y
define_bool CONFIG_SERIAL_CONSOLE y
define_bool CONFIG_SUN_KEYBOARD y
define_bool CONFIG_SUN_CONSOLE y
define_bool CONFIG_SUN_AUXIO y
define_bool CONFIG_SUN_IO y
bool 'PCI support' CONFIG_PCI
source drivers/sbus/char/Config.in
source drivers/sbus/audio/Config.in

if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
   tristate 'Openprom tree appears in /proc/openprom (EXPERIMENTAL)' CONFIG_SUN_OPENPROMFS
fi
bool 'Networking support' CONFIG_NET
bool 'System V IPC' CONFIG_SYSVIPC
bool 'BSD Process Accounting' CONFIG_BSD_PROCESS_ACCT
bool 'Sysctl support' CONFIG_SYSCTL
if [ "$CONFIG_PROC_FS" = "y" ]; then
   choice 'Kernel core (/proc/kcore) format' \
	"ELF		CONFIG_KCORE_ELF	\
	 A.OUT		CONFIG_KCORE_AOUT" ELF
fi
bool 'Kernel support for Linux/Sparc 32bit binary compatibility' CONFIG_SPARC32_COMPAT
if [ "$CONFIG_SPARC32_COMPAT" != "n" ]; then
   tristate '  Kernel support for 32-bit ELF binaries' CONFIG_BINFMT_ELF32
   bool '  Kernel support for 32-bit (ie. SunOS) a.out binaries' CONFIG_BINFMT_AOUT32
fi
tristate 'Kernel support for 64-bit ELF binaries' CONFIG_BINFMT_ELF
tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC
if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
   tristate 'Solaris binary emulation (EXPERIMENTAL)' CONFIG_SOLARIS_EMUL
fi
source drivers/parport/Config.in
dep_tristate '  Parallel printer support' CONFIG_PRINTER $CONFIG_PARPORT
if [ "$CONFIG_PCI" = "y" ]; then
   tristate 'SUNW, envctrl support' CONFIG_ENVCTRL
fi
endmenu

mainmenu_option next_comment
comment 'Loadable module support'
bool 'Enable loadable module support' CONFIG_MODULES
if [ "$CONFIG_MODULES" = "y" ]; then
   bool '  Set version information on all symbols for modules' CONFIG_MODVERSIONS
   bool '  Kernel module loader' CONFIG_KMOD
fi
endmenu

mainmenu_option next_comment
comment 'Floppy, IDE, and other block devices'

bool 'Normal floppy disk support' CONFIG_BLK_DEV_FD

bool 'Multiple devices driver support' CONFIG_BLK_DEV_MD
if [ "$CONFIG_BLK_DEV_MD" = "y" ]; then
   tristate '  Linear (append) mode' CONFIG_MD_LINEAR
   tristate '  RAID-0 (striping) mode' CONFIG_MD_STRIPED
   tristate '  RAID-1 (mirroring) mode' CONFIG_MD_MIRRORING
   tristate '  RAID-4/RAID-5 mode' CONFIG_MD_RAID5
fi

tristate 'RAM disk support' CONFIG_BLK_DEV_RAM
if [ "$CONFIG_BLK_DEV_RAM" = "y" ]; then
   bool '  Initial RAM disk (initrd) support' CONFIG_BLK_DEV_INITRD
fi

tristate 'Loopback device support' CONFIG_BLK_DEV_LOOP
tristate 'Network block device support' CONFIG_BLK_DEV_NBD

if [ "$CONFIG_PCI" = "y" ]; then
   tristate 'Ultra/PCI IDE disk/cdrom/tape/floppy support' CONFIG_BLK_DEV_IDE
   if [ "$CONFIG_BLK_DEV_IDE" != "n" ]; then
      dep_tristate '  Include IDE/ATA-2 DISK support' CONFIG_BLK_DEV_IDEDISK $CONFIG_BLK_DEV_IDE
      dep_tristate '  Include IDE/ATAPI CDROM support' CONFIG_BLK_DEV_IDECD $CONFIG_BLK_DEV_IDE
      dep_tristate '  Include IDE/ATAPI TAPE support' CONFIG_BLK_DEV_IDETAPE $CONFIG_BLK_DEV_IDE
      dep_tristate '  Include IDE/ATAPI FLOPPY support' CONFIG_BLK_DEV_IDEFLOPPY $CONFIG_BLK_DEV_IDE
      dep_tristate '  SCSI emulation support' CONFIG_BLK_DEV_IDESCSI $CONFIG_BLK_DEV_IDE
      define_bool CONFIG_BLK_DEV_IDEPCI y
      define_bool CONFIG_BLK_DEV_IDEDMA y
      define_bool CONFIG_IDEDMA_AUTO y
      define_bool CONFIG_IDEDMA_NEW_DRIVE_LISTINGS y
      define_bool CONFIG_BLK_DEV_NS87415 y
      define_bool CONFIG_BLK_DEV_CMD646 y
   fi
fi

endmenu

if [ "$CONFIG_NET" = "y" ]; then
   source net/Config.in
fi

mainmenu_option next_comment
comment 'SCSI support'

tristate 'SCSI support' CONFIG_SCSI

if [ "$CONFIG_SCSI" != "n" ]; then
   comment 'SCSI support type (disk, tape, CDrom)'

   dep_tristate '  SCSI disk support' CONFIG_BLK_DEV_SD $CONFIG_SCSI
   dep_tristate '  SCSI tape support' CONFIG_CHR_DEV_ST $CONFIG_SCSI
   dep_tristate '  SCSI CDROM support' CONFIG_BLK_DEV_SR $CONFIG_SCSI
   if [ "$CONFIG_BLK_DEV_SR" != "n" ]; then
      bool '    Enable vendor-specific extensions (for SCSI CDROM)' CONFIG_BLK_DEV_SR_VENDOR
   fi
   dep_tristate '  SCSI generic support' CONFIG_CHR_DEV_SG $CONFIG_SCSI

   comment 'Some SCSI devices (e.g. CD jukebox) support multiple LUNs'

   bool '  Probe all LUNs on each SCSI device' CONFIG_SCSI_MULTI_LUN

   bool '  Verbose SCSI error reporting (kernel size +=12K)' CONFIG_SCSI_CONSTANTS

   mainmenu_option next_comment
   comment 'SCSI low-level drivers'

   bool 'Sparc ESP Scsi Driver' CONFIG_SCSI_SUNESP $CONFIG_SCSI
   tristate 'PTI Qlogic, ISP Driver' CONFIG_SCSI_QLOGICPTI $CONFIG_SCSI

   if [ "$CONFIG_PCI" != "n" ]; then
      dep_tristate 'Adaptec AIC7xxx support' CONFIG_SCSI_AIC7XXX $CONFIG_SCSI
      if [ "$CONFIG_SCSI_AIC7XXX" != "n" ]; then
	 bool '  Enable tagged command queueing (TCQ) by default' CONFIG_AIC7XXX_TAGGED_QUEUEING Y
	 int  '  Maximum number of TCQ commands per device' CONFIG_AIC7XXX_CMDS_PER_DEVICE 8
  	 bool '  Collect statistics to report in /proc' CONFIG_AIC7XXX_PROC_STATS N
	 int  '  Delay in seconds after SCSI bus reset' CONFIG_AIC7XXX_RESET_DELAY 5
      fi
      dep_tristate 'NCR53C8XX SCSI support' CONFIG_SCSI_NCR53C8XX $CONFIG_SCSI
      if [ "$CONFIG_SCSI_NCR53C8XX" != "n" ]; then
	 int 'default tagged command queue depth' CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS 8
	 int 'maximum number of queued commands' CONFIG_SCSI_NCR53C8XX_MAX_TAGS 32
	 int 'synchronous transfers frequency in MHz' CONFIG_SCSI_NCR53C8XX_SYNC 10
	 bool '  enable profiling' CONFIG_SCSI_NCR53C8XX_PROFILE
	 if [ "$CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS" = "0" ]; then
	    bool '  not allow targets to disconnect' CONFIG_SCSI_NCR53C8XX_NO_DISCONNECT
	 fi
	 if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
	    bool '  assume boards are SYMBIOS compatible (EXPERIMENTAL)' CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT
	 fi
      fi
      dep_tristate 'Qlogic ISP SCSI support' CONFIG_SCSI_QLOGIC_ISP $CONFIG_SCSI
   fi

   endmenu
fi
endmenu

source drivers/fc4/Config.in

if [ "$CONFIG_NET" = "y" ]; then
   mainmenu_option next_comment
   comment 'Network device support'

   bool 'Network device support' CONFIG_NETDEVICES
   if [ "$CONFIG_NETDEVICES" = "y" ]; then
      tristate '  Dummy net driver support' CONFIG_DUMMY
      tristate '  PPP (point-to-point) support' CONFIG_PPP
      if [ ! "$CONFIG_PPP" = "n" ]; then
	 comment '    CCP compressors for PPP are only built as modules.'
      fi
      tristate '  SLIP (serial line) support' CONFIG_SLIP
      if [ "$CONFIG_SLIP" != "n" ]; then
	 bool '    CSLIP compressed headers' CONFIG_SLIP_COMPRESSED
	 bool '    Keepalive and linefill' CONFIG_SLIP_SMART
	 bool '    Six bit SLIP encapsulation' CONFIG_SLIP_MODE_SLIP6
      fi
      bool '  Sun LANCE support' CONFIG_SUNLANCE
      tristate '  Sun Happy Meal 10/100baseT support' CONFIG_HAPPYMEAL
      if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
	 tristate '  Sun BigMAC 10/100baseT support (EXPERIMENTAL)' CONFIG_SUNBMAC
      fi
      tristate '  Sun QuadEthernet support' CONFIG_SUNQE
      tristate '  MyriCOM Gigabit Ethernet support' CONFIG_MYRI_SBUS
      if [ "$CONFIG_PCI" = "y" ]; then
	 tristate '  Generic DECchip & DIGITAL EtherWORKS PCI/EISA' CONFIG_DE4X5
	 tristate '  3c590/3c900 series (592/595/597) "Vortex/Boomerang" support' CONFIG_VORTEX
	 tristate '  RealTek 8129/8139 (not 8019/8029!) support' CONFIG_RTL8139
	 tristate '  PCI NE2000 support' CONFIG_NE2K_PCI
	 tristate '  EtherExpressPro/100 support' CONFIG_EEXPRESS_PRO100
	 tristate '  Adaptec Starfire support' CONFIG_ADAPTEC_STARFIRE
      fi
#      bool '  FDDI driver support' CONFIG_FDDI
#      if [ "$CONFIG_FDDI" = "y" ]; then
#      fi
   fi
endmenu
fi

# This one must be before the filesystem configs. -DaveM
mainmenu_option next_comment
comment 'Unix 98 PTY support'
bool 'Unix98 PTY support' CONFIG_UNIX98_PTYS
if [ "$CONFIG_UNIX98_PTYS" = "y" ]; then
   int 'Maximum number of Unix98 PTYs in use (0-2048)' CONFIG_UNIX98_PTY_COUNT 256
fi
endmenu

mainmenu_option next_comment
comment 'Video For Linux'
tristate 'Video For Linux' CONFIG_VIDEO_DEV
if [ "$CONFIG_VIDEO_DEV" != "n" ]; then
   if [ "$CONFIG_PCI" != "n" ]; then
      dep_tristate '  BT848 Video For Linux' CONFIG_VIDEO_BT848 $CONFIG_VIDEO_DEV
   fi
fi
endmenu

source fs/Config.in

mainmenu_option next_comment
comment 'Watchdog'

tristate 'Software watchdog' CONFIG_SOFT_WATCHDOG
endmenu

mainmenu_option next_comment
comment 'Kernel hacking'

bool 'Magic SysRq key' CONFIG_MAGIC_SYSRQ
#bool 'ECache flush trap support at ta 0x72' CONFIG_EC_FLUSH_TRAP
endmenu