# $Id: config.in,v 1.17 1997/09/04 01:54:43 davem Exp $
# For a description of the syntax of this configuration file,
# see the Configure script.
#
mainmenu_name "Linux/SPARC Kernel Configuration"

mainmenu_option next_comment
comment 'Code maturity level options'
bool 'Prompt for development and/or incomplete code/drivers' CONFIG_EXPERIMENTAL
endmenu

mainmenu_option next_comment
comment 'Loadable module support'
bool 'Enable loadable module support' CONFIG_MODULES
if [ "$CONFIG_MODULES" = "y" ]; then
  bool 'Set version information on all symbols for modules' CONFIG_MODVERSIONS
  bool 'Kernel daemon support (e.g. autoload of modules)' CONFIG_KERNELD
fi
endmenu

mainmenu_option next_comment
comment 'General setup'

define_bool CONFIG_VT y
define_bool CONFIG_VT_CONSOLE y

bool 'Support for AP1000 multicomputer' CONFIG_AP1000

if [ "$CONFIG_AP1000" = "y" ]; then
	define_bool CONFIG_NO_KEYBOARD y
	define_bool CONFIG_APFDDI y
	define_bool CONFIG_APBLOCK y
	define_bool CONFIG_APBIF y
	tristate 'OPIU DDV Driver' CONFIG_DDV
else
	# Global things across all Sun machines.
	define_bool CONFIG_SBUS y
	define_bool CONFIG_SBUSCHAR y
	define_bool CONFIG_SUN_MOUSE y
	define_bool CONFIG_SERIAL y
	define_bool CONFIG_SUN_SERIAL y
	define_bool CONFIG_SUN_KEYBOARD y
	define_bool CONFIG_SUN_CONSOLE y
	define_bool CONFIG_SUN_AUXIO y
	define_bool CONFIG_SUN_IO y
	define_bool CONFIG_PCI y
	source drivers/sbus/char/Config.in
fi

tristate 'Openprom tree appears in /proc/openprom (EXPERIMENTAL)' CONFIG_SUN_OPENPROMFS
bool 'Networking support' CONFIG_NET
bool 'System V IPC' CONFIG_SYSVIPC
bool 'Sysctl support' CONFIG_SYSCTL
bool 'Kernel support for Linux/Sparc 32bit binary compatibility' CONFIG_SPARC32_COMPAT
tristate 'Kernel support for 64-bit ELF binaries' CONFIG_BINFMT_ELF
if [ "$CONFIG_SPARC32_COMPAT" != "n" ]; then
  tristate 'Kernel support for 32-bit ELF binaries' CONFIG_BINFMT_ELF32
  bool 'Kernel support for 32-bit (ie. SunOS) a.out binaries' CONFIG_BINFMT_AOUT32
fi
if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
  tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC
  tristate 'Kernel support for JAVA binaries (obsolete)' CONFIG_BINFMT_JAVA
fi
if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
  tristate 'Solaris binary emulation' CONFIG_SOLARIS_EMUL
fi
endmenu

mainmenu_option next_comment
comment 'Floppy, IDE, and other block devices'

bool 'Normal floppy disk support' CONFIG_BLK_DEV_FD

bool 'Multiple devices driver support' CONFIG_BLK_DEV_MD
if [ "$CONFIG_BLK_DEV_MD" = "y" ]; then
  tristate '   Linear (append) mode' CONFIG_MD_LINEAR
  tristate '   RAID-0 (striping) mode' CONFIG_MD_STRIPED
#  tristate '   RAID-1 (mirroring) mode' CONFIG_MD_MIRRORING
fi

tristate 'RAM disk support' CONFIG_BLK_DEV_RAM
if [ "$CONFIG_BLK_DEV_RAM" = "y" ]; then
  bool '   Initial RAM disk (initrd) support' CONFIG_BLK_DEV_INITRD
fi

tristate 'Loopback device support' CONFIG_BLK_DEV_LOOP

if [ "$CONFIG_PCI" = "y" ]; then
	tristate 'Ultra/PCI IDE disk/cdrom/tape/floppy support' CONFIG_BLK_DEV_IDE
	if [ "$CONFIG_BLK_DEV_IDE" = "y" ]; then
	  dep_tristate '   Include IDE/ATA-2 DISK support' CONFIG_BLK_DEV_IDEDISK $CONFIG_BLK_DEV_IDE
	  dep_tristate '   Include IDE/ATAPI CDROM support' CONFIG_BLK_DEV_IDECD $CONFIG_BLK_DEV_IDE
	  dep_tristate '   Include IDE/ATAPI TAPE support' CONFIG_BLK_DEV_IDETAPE $CONFIG_BLK_DEV_IDE
	  dep_tristate '   Include IDE/ATAPI FLOPPY support' CONFIG_BLK_DEV_IDEFLOPPY $CONFIG_BLK_DEV_IDE
	  dep_tristate '   SCSI emulation support' CONFIG_BLK_DEV_IDESCSI $CONFIG_BLK_DEV_IDE
	  define_bool CONFIG_IDE_CHIPSETS y
	  define_bool CONFIG_BLK_DEV_NS87415 y
	fi
fi

endmenu

if [ "$CONFIG_NET" = "y" ]; then
	source net/Config.in
fi

mainmenu_option next_comment
comment 'SCSI support'

tristate 'SCSI support' CONFIG_SCSI

if [ "$CONFIG_SCSI" != "n" ]; then
	comment 'SCSI support type (disk, tape, CDrom)'

	dep_tristate 'SCSI disk support' CONFIG_BLK_DEV_SD $CONFIG_SCSI
	dep_tristate 'SCSI tape support' CONFIG_CHR_DEV_ST $CONFIG_SCSI
	dep_tristate 'SCSI CDROM support' CONFIG_BLK_DEV_SR $CONFIG_SCSI
	if [ "$CONFIG_BLK_DEV_SR" != "n" ]; then
	  bool '  Enable vendor-specific extentions (for SCSI CDROM)' CONFIG_BLK_DEV_SR_VENDOR
	fi
	dep_tristate 'SCSI generic support' CONFIG_CHR_DEV_SG $CONFIG_SCSI

	comment 'Some SCSI devices (e.g. CD jukebox) support multiple LUNs'

	bool 'Probe all LUNs on each SCSI device' CONFIG_SCSI_MULTI_LUN

	bool 'Verbose SCSI error reporting (kernel size +=12K)' CONFIG_SCSI_CONSTANTS

	mainmenu_option next_comment
	comment 'SCSI low-level drivers'

	bool 'Sparc ESP Scsi Driver' CONFIG_SCSI_SUNESP $CONFIG_SCSI
	tristate 'PTI Qlogic,ISP Driver' CONFIG_SCSI_QLOGICPTI $CONFIG_SCSI

	if [ "$CONFIG_PCI" != "n" ]; then
	  dep_tristate 'Adaptec AIC7xxx support' CONFIG_SCSI_AIC7XXX $CONFIG_SCSI
	  if [ "$CONFIG_SCSI_AIC7XXX" != "n" ]; then
	    bool '   Enable tagged command queueing' CONFIG_AIC7XXX_TAGGED_QUEUEING Y
	    dep_tristate '   Override driver defaults for commands per LUN' CONFIG_OVERRIDE_CMDS N
	    if [ "$CONFIG_OVERRIDE_CMDS" != "n" ]; then
	      int  '   Maximum number of commands per LUN' CONFIG_AIC7XXX_CMDS_PER_LUN 8
	    fi
	    bool '   Enable SCB paging' CONFIG_AIC7XXX_PAGE_ENABLE N
	    bool '   Collect statistics to report in /proc' CONFIG_AIC7XXX_PROC_STATS N
	    int  '   Delay in seconds after SCSI bus reset' CONFIG_AIC7XXX_RESET_DELAY 15
	  fi
	fi

	endmenu
fi
endmenu

if [ "$CONFIG_NET" = "y" ]; then
	mainmenu_option next_comment
	comment 'Network device support'

	bool 'Network device support' CONFIG_NETDEVICES
	if [ "$CONFIG_NETDEVICES" = "y" ]; then
		tristate 'Dummy net driver support' CONFIG_DUMMY
		tristate 'PPP (point-to-point) support' CONFIG_PPP
		if [ ! "$CONFIG_PPP" = "n" ]; then
		   comment 'CCP compressors for PPP are only built as modules.'
		fi
		tristate 'SLIP (serial line) support' CONFIG_SLIP
		if [ "$CONFIG_SLIP" != "n" ]; then
		  bool ' CSLIP compressed headers' CONFIG_SLIP_COMPRESSED
		  bool ' Keepalive and linefill' CONFIG_SLIP_SMART
		  bool ' Six bit SLIP encapsulation' CONFIG_SLIP_MODE_SLIP6
		fi
		bool 'Sun LANCE support' CONFIG_SUNLANCE
		tristate 'Sun Happy Meal 10/100baseT support' CONFIG_HAPPYMEAL
		tristate 'Sun QuadEthernet support' CONFIG_SUNQE
		tristate 'MyriCOM Gigabit Ethernet support' CONFIG_MYRI_SBUS
		if [ "$CONFIG_PCI" = "y" ]; then
			tristate 'Generic DECchip & DIGITAL EtherWORKS PCI/EISA' CONFIG_DE4X5
		fi
#		bool 'FDDI driver support' CONFIG_FDDI
#		if [ "$CONFIG_FDDI" = "y" ]; then
#		fi
	fi
	endmenu
fi

source fs/Config.in

source fs/nls/Config.in

mainmenu_option next_comment
comment 'Kernel hacking'

bool 'Kernel profiling support' CONFIG_PROFILE
if [ "$CONFIG_PROFILE" = "y" ]; then
	int ' Profile shift count' CONFIG_PROFILE_SHIFT 2
fi
bool 'ECache flush trap support at ta 0x72' CONFIG_EC_FLUSH_TRAP
endmenu