#
# Block device driver configuration
#
mainmenu_option next_comment
comment 'Block devices'

tristate 'Normal PC floppy disk support' CONFIG_BLK_DEV_FD
if [ "$CONFIG_AMIGA" = "y" ]; then
   tristate 'Amiga floppy support' CONFIG_AMIGA_FLOPPY
fi
if [ "$CONFIG_ATARI" = "y" ]; then
   tristate 'Atari floppy support' CONFIG_ATARI_FLOPPY
fi
if [ "$CONFIG_MAC" = "y" ]; then
   if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
      bool 'Macintosh IIfx/Quadra 900/Quadra 950 floppy support (EXPERIMENTAL)' CONFIG_BLK_DEV_SWIM_IOP
   fi
fi

tristate 'Enhanced IDE/MFM/RLL disk/cdrom/tape/floppy support' CONFIG_BLK_DEV_IDE
comment 'Please see Documentation/ide.txt for help/info on IDE drives'
if [ "$CONFIG_BLK_DEV_IDE" = "n" ]; then
   bool 'Old hard disk (MFM/RLL/IDE) driver' CONFIG_BLK_DEV_HD_ONLY
else
   bool '  Use old disk-only driver on primary interface' CONFIG_BLK_DEV_HD_IDE
   dep_tristate '  Include IDE/ATA-2 DISK support' CONFIG_BLK_DEV_IDEDISK $CONFIG_BLK_DEV_IDE
   if [ "$CONFIG_BLK_DEV_IDEDISK" != "n" ]; then
      bool '    Use multi-mode by default' CONFIG_IDEDISK_MULTI_MODE
   fi
   dep_tristate '  Include IDE/ATAPI CDROM support' CONFIG_BLK_DEV_IDECD $CONFIG_BLK_DEV_IDE
   dep_tristate '  Include IDE/ATAPI TAPE support' CONFIG_BLK_DEV_IDETAPE $CONFIG_BLK_DEV_IDE
   dep_tristate '  Include IDE/ATAPI FLOPPY support' CONFIG_BLK_DEV_IDEFLOPPY $CONFIG_BLK_DEV_IDE
   dep_tristate '  SCSI emulation support' CONFIG_BLK_DEV_IDESCSI $CONFIG_BLK_DEV_IDE
   comment 'IDE chipset support/bugfixes'
   if [ "$CONFIG_BLK_DEV_IDE" != "n" ]; then
      bool '  CMD640 chipset bugfix/support' CONFIG_BLK_DEV_CMD640
      if [ "$CONFIG_BLK_DEV_CMD640" = "y" ]; then
	 bool '    CMD640 enhanced support' CONFIG_BLK_DEV_CMD640_ENHANCED
      fi
      if [ "$CONFIG_ISAPNP" = "y" ]; then
	 bool '  ISA-PNP EIDE support' CONFIG_BLK_DEV_ISAPNP
      fi
      if [ "$CONFIG_PCI" = "y" ]; then
	 bool '  RZ1000 chipset bugfix/support' CONFIG_BLK_DEV_RZ1000
	 bool '  Generic PCI IDE chipset support' CONFIG_BLK_DEV_IDEPCI
	 if [ "$CONFIG_BLK_DEV_IDEPCI" = "y" ]; then
	    bool '    Generic PCI bus-master DMA support' CONFIG_BLK_DEV_IDEDMA_PCI
	    if [ "$CONFIG_BLK_DEV_IDEDMA_PCI" = "y" ]; then
	       bool '      Use PCI DMA by default when available' CONFIG_IDEDMA_PCI_AUTO
	       if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
		  bool '      Good-Bad DMA Model-Firmware (EXPERIMENTAL)' CONFIG_IDEDMA_NEW_DRIVE_LISTINGS
		  define_bool CONFIG_IDEDMA_PCI_EXPERIMENTAL y
	       else
		  define_bool CONFIG_IDEDMA_PCI_EXPERIMENTAL n
	       fi
	    fi
	    bool '    Boot off-board chipsets first support' CONFIG_BLK_DEV_OFFBOARD
	    bool '    AEC6210 chipset support' CONFIG_BLK_DEV_AEC6210
	    if [ "$CONFIG_IDEDMA_PCI_EXPERIMENTAL" = "y" -a "$CONFIG_BLK_DEV_AEC6210" = "y" ]; then
	       bool '      AEC6210 Tuning support (EXPERIMENTAL)' CONFIG_BLK_DEV_AEC6210_TUNING
	    fi
	    if [ "$CONFIG_BLK_DEV_IDEDMA_PCI" = "y" ]; then
	       bool '    ALI M15x3 chipset support' CONFIG_BLK_DEV_ALI15X3
	       if [ "$CONFIG_IDEDMA_PCI_EXPERIMENTAL" = "y" ]; then
		  bool '    AMD Viper support (EXPERIMENTAL)' CONFIG_BLK_DEV_AMD7409
	       fi
	    fi
	    bool '    CMD64X chipset support' CONFIG_BLK_DEV_CMD64X
	    if [ "$CONFIG_BLK_DEV_CMD64X" = "y" -a "$CONFIG_IDEDMA_PCI_EXPERIMENTAL" = "y" ]; then
	       bool '      CMD64X chipset RAID support (EXPERIMENTAL) (WIP)' CONFIG_BLK_DEV_CMD64X_RAID
	    fi
	    if [ "$CONFIG_IDEDMA_PCI_EXPERIMENTAL" = "y" ]; then
	       bool '    CY82C693 chipset support (EXPERIMENTAL)' CONFIG_BLK_DEV_CY82C693
	    fi
	    if [ "$CONFIG_BLK_DEV_IDEDMA_PCI" = "y" ]; then
  	       bool '    HPT34X chipset support' CONFIG_BLK_DEV_HPT34X
	       if [ "$CONFIG_IDEDMA_PCI_EXPERIMENTAL" = "y" -a "$CONFIG_BLK_DEV_HPT34X" = "y" ]; then
		  bool '      HPT34X DMA support (EXPERIMENTAL)' CONFIG_BLK_DEV_HPT34X_DMA
	       fi
	       bool '    HPT366 chipset support' CONFIG_BLK_DEV_HPT366
	       if [ "$CONFIG_IDEDMA_PCI_EXPERIMENTAL" = "y" -a "$CONFIG_BLK_DEV_HPT366" = "y" ]; then
		  bool '      HPT366 Fast Interrupt support (EXPERIMENTAL) (WIP)' HPT366_FAST_IRQ_PREDICTION
		  bool '      HPT366 mode three unsupported (EXPERIMENTAL) (WIP)' HPT366_MODE3
	       fi
	       if [ "$CONFIG_X86" = "y" ]; then
		  bool '    Intel PIIXn chipsets support' CONFIG_BLK_DEV_PIIX
		  if [ "$CONFIG_BLK_DEV_PIIX" = "y" -a "$CONFIG_IDEDMA_PCI_AUTO" = "y" ]; then
		     bool '      PIIXn Tuning support' CONFIG_BLK_DEV_PIIX_TUNING
		  fi
	       fi
	    fi
	    if [ "$CONFIG_IDEDMA_PCI_EXPERIMENTAL" = "y" ]; then
	       bool '    NS87415 chipset support (EXPERIMENTAL)' CONFIG_BLK_DEV_NS87415
	    fi
	    if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
	       bool '    OPTi 82C621 chipset enhanced support (EXPERIMENTAL)' CONFIG_BLK_DEV_OPTI621
	    fi
	    if [ "$CONFIG_BLK_DEV_IDEDMA_PCI" = "y" ]; then
	       bool '    PROMISE PDC20246/PDC20262 support' CONFIG_BLK_DEV_PDC202XX
	       if [ "$CONFIG_BLK_DEV_PDC202XX" = "y" ]; then
		  bool '      Special UDMA Feature' CONFIG_PDC202XX_FORCE_BURST_BIT
		  if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
		     bool '      Special Mode Feature (EXPERIMENTAL)' CONFIG_PDC202XX_FORCE_MASTER_MODE
		  fi
	       fi
  	       if [ "$CONFIG_X86" = "y" ]; then
	          bool '    SiS5513 chipset support' CONFIG_BLK_DEV_SIS5513
	       fi
	    fi
	    if [ "$CONFIG_IDEDMA_PCI_EXPERIMENTAL" = "y" ]; then
	       bool '    Tekram TRM290 chipset support (EXPERIMENTAL)' CONFIG_BLK_DEV_TRM290
	       if [ "$CONFIG_X86" = "y" ]; then
		  bool '    VIA82CXXX chipset support (EXPERIMENTAL)' CONFIG_BLK_DEV_VIA82CXXX
	       fi
	    fi
         fi
	 if [ "$CONFIG_PPC" = "y" -o "$CONFIG_ARM" = "y" ]; then
	    bool '    Winbond SL82c105 support' CONFIG_BLK_DEV_SL82C105
	 fi
      fi
      if [ "$CONFIG_PMAC" = "y" -o "$CONFIG_ALL_PPC" = "y" ]; then
	 bool '    Builtin PowerMac IDE support' CONFIG_BLK_DEV_IDE_PMAC
	 if [ "$CONFIG_BLK_DEV_IDE_PMAC" != "n" ]; then
	    bool '      PowerMac IDE DMA support' CONFIG_BLK_DEV_IDEDMA_PMAC
	    if [ "$CONFIG_BLK_DEV_IDEDMA_PMAC" = "y" ]; then
	       bool '        Use DMA by default' CONFIG_IDEDMA_PMAC_AUTO
	    fi
	 fi
      fi
      if [ "$CONFIG_ARCH_ACORN" = "y" ]; then
	 bool '    ICS IDE interface support' CONFIG_BLK_DEV_IDE_ICSIDE
	 if [ "$CONFIG_BLK_DEV_IDE_ICSIDE" = "y" ]; then
	    bool '      ICS DMA support' CONFIG_BLK_DEV_IDEDMA_ICS
	    if [ "$CONFIG_BLK_DEV_IDEDMA_ICS" = "y" ]; then
	       bool '        Use ICS DMA by default' CONFIG_IDEDMA_ICS_AUTO
	    fi
	 fi
	 bool '    RapIDE interface support' CONFIG_BLK_DEV_IDE_RAPIDE
      fi
      if [ "$CONFIG_BLK_DEV_IDEDMA_PCI" = "y" -o \
	   "$CONFIG_BLK_DEV_IDEDMA_PMAC" = "y" -o \
	   "$CONFIG_BLK_DEV_IDEDMA_ICS" = "y" ]; then
	 define_bool CONFIG_BLK_DEV_IDEDMA y
	 if [ "$CONFIG_IDEDMA_PCI_AUTO" = "y" -o \
	      "$CONFIG_IDEDMA_PMAC_AUTO" = "y" -o \
	      "$CONFIG_IDEDMA_ICS_AUTO" = "y" ]; then
	    define_bool CONFIG_IDEDMA_AUTO y
	 fi
      fi
      bool '  Other IDE chipset support' CONFIG_IDE_CHIPSETS
      if [ "$CONFIG_IDE_CHIPSETS" = "y" ]; then
	 comment 'Note: most of these also require special kernel boot parameters'
	 bool '    Generic 4 drives/port support' CONFIG_BLK_DEV_4DRIVES
	 bool '    ALI M14xx support' CONFIG_BLK_DEV_ALI14XX
	 bool '    DTC-2278 support' CONFIG_BLK_DEV_DTC2278
	 bool '    Holtek HT6560B support' CONFIG_BLK_DEV_HT6560B
	 if [ "$CONFIG_BLK_DEV_IDEDISK" = "y" -a "$CONFIG_EXPERIMENTAL" = "y" ]; then
	    bool '    PROMISE DC4030 support (EXPERIMENTAL)' CONFIG_BLK_DEV_PDC4030
	 fi
	 bool '    QDI QD6580 support' CONFIG_BLK_DEV_QD6580
	 bool '    UMC-8672 support' CONFIG_BLK_DEV_UMC8672
      fi
      if [ "$CONFIG_AMIGA" = "y" ]; then
	 bool '    Amiga Gayle IDE interface support' CONFIG_BLK_DEV_GAYLE
	 if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
	    dep_tristate '      Amiga IDE Doubler support (EXPERIMENTAL)' CONFIG_BLK_DEV_IDEDOUBLER $CONFIG_BLK_DEV_GAYLE
	 fi
      fi
      if [ "$CONFIG_ZORRO" = "y" -a "$CONFIG_EXPERIMENTAL" = "y" ]; then
	 bool '    Buddha/Catweasel IDE interface support (EXPERIMENTAL)' CONFIG_BLK_DEV_BUDDHA
      fi
      if [ "$CONFIG_ATARI" = "y" ]; then
	 bool '    Falcon IDE interface support' CONFIG_BLK_DEV_FALCON_IDE
      fi
      if [ "$CONFIG_MAC" = "y" ]; then
	 bool '    Macintosh Quadra/Powerbook IDE interface support' CONFIG_BLK_DEV_MAC_IDE
      fi
   fi
fi
if [ "$CONFIG_MCA" = "y" ]; then
   tristate 'PS/2 ESDI hard disk support' CONFIG_BLK_DEV_PS2
fi
if [ "$CONFIG_ZORRO" = "y" ]; then
   tristate 'Amiga Zorro II ramdisk support' CONFIG_AMIGA_Z2RAM
fi
if [ "$CONFIG_ATARI" = "y" ]; then
   tristate 'Atari ACSI support' CONFIG_ATARI_ACSI
   if [ "$CONFIG_ATARI_ACSI" != "n" ]; then
      comment 'Some devices (e.g. CD jukebox) support multiple LUNs'
      bool '  Probe all LUNs on each ACSI device' CONFIG_ACSI_MULTI_LUN
      tristate '  Atari SLM laser printer support' CONFIG_ATARI_SLM
   fi
fi
if [ "$CONFIG_PCI" = "y" ]; then
   tristate 'Compaq SMART2 support' CONFIG_BLK_CPQ_DA
fi

comment 'Additional Block Devices'

tristate 'Loopback device support' CONFIG_BLK_DEV_LOOP
if [ "$CONFIG_NET" = "y" ]; then
   tristate 'Network block device support' CONFIG_BLK_DEV_NBD
fi
bool 'Multiple devices driver support' CONFIG_BLK_DEV_MD
if [ "$CONFIG_BLK_DEV_MD" = "y" ]; then
   tristate '  Linear (append) mode' CONFIG_MD_LINEAR
   tristate '  RAID-0 (striping) mode' CONFIG_MD_STRIPED
   tristate '  RAID-1 (mirroring) mode' CONFIG_MD_MIRRORING
   tristate '  RAID-4/RAID-5 mode' CONFIG_MD_RAID5
fi
if [ "$CONFIG_MD_LINEAR" = "y" -o "$CONFIG_MD_STRIPED" = "y" ]; then
   bool '    Boot support (linear, striped)' CONFIG_MD_BOOT
fi
tristate 'RAM disk support' CONFIG_BLK_DEV_RAM
if [ "$CONFIG_BLK_DEV_RAM" = "y" ]; then
   bool '  Initial RAM disk (initrd) support' CONFIG_BLK_DEV_INITRD
fi
tristate 'XT hard disk support' CONFIG_BLK_DEV_XD
if [ "$CONFIG_PCI" = "y" ]; then
  tristate 'Mylex DAC960/DAC1100 PCI RAID Controller support' CONFIG_BLK_DEV_DAC960
fi

dep_tristate 'Parallel port IDE device support' CONFIG_PARIDE $CONFIG_PARIDE_PARPORT
if [ "$CONFIG_PARIDE" = "y" -o "$CONFIG_PARIDE" = "m" ]; then
   source drivers/block/paride/Config.in
fi

if [ "$CONFIG_IDE_CHIPSETS" = "y" -o \
     "$CONFIG_BLK_DEV_AEC6210" = "y" -o \
     "$CONFIG_BLK_DEV_ALI15X3" = "y" -o \
     "$CONFIG_BLK_DEV_AMD7409" = "y" -o \
     "$CONFIG_BLK_DEV_CMD640" = "y" -o \
     "$CONFIG_BLK_DEV_CMD64X" = "y" -o \
     "$CONFIG_BLK_DEV_CY82C693" = "y" -o \
     "$CONFIG_BLK_DEV_HPT34X" = "y" -o \
     "$CONFIG_BLK_DEV_HPT366" = "y" -o \
     "$CONFIG_BLK_DEV_IDE_PMAC" = "y" -o \
     "$CONFIG_BLK_DEV_OPTI621" = "y" -o \
     "$CONFIG_BLK_DEV_PDC202XX" = "y" -o \
     "$CONFIG_BLK_DEV_PIIX" = "y" -o \
     "$CONFIG_BLK_DEV_SIS5513" = "y" -o \
     "$CONFIG_BLK_DEV_SL82C105" = "y" ]; then
   define_bool CONFIG_BLK_DEV_IDE_MODES y
else
   define_bool CONFIG_BLK_DEV_IDE_MODES n
fi

if [ "$CONFIG_BLK_DEV_HD_IDE" = "y" -o "$CONFIG_BLK_DEV_HD_ONLY" = "y" ]; then
   define_bool CONFIG_BLK_DEV_HD y
else
   define_bool CONFIG_BLK_DEV_HD n
fi

endmenu