#ifndef _BLK_H #define _BLK_H #include #include /* * NR_REQUEST is the number of entries in the request-queue. * NOTE that writes may use only the low 2/3 of these: reads * take precedence. * * 32 seems to be a reasonable number: enough to get some benefit * from the elevator-mechanism, but not so much as to lock a lot of * buffers when they are in the queue. 64 seems to be too many (easily * long pauses in reading when heavy writing/syncing is going on) */ #define NR_REQUEST 64 /* * This is used in the elevator algorithm: Note that * reads always go before writes. This is natural: reads * are much more time-critical than writes. */ #define IN_ORDER(s1,s2) \ ((s1)->cmd < (s2)->cmd || ((s1)->cmd == (s2)->cmd && \ ((s1)->dev < (s2)->dev || (((s1)->dev == (s2)->dev && \ (s1)->sector < (s2)->sector))))) /* * These will have to be changed to be aware of different buffer * sizes etc.. It actually needs a major cleanup. */ #define SECTOR_MASK (blksize_size[MAJOR_NR] && \ blksize_size[MAJOR_NR][MINOR(CURRENT->dev)] ? \ ((blksize_size[MAJOR_NR][MINOR(CURRENT->dev)] >> 9) - 1) : \ ((BLOCK_SIZE >> 9) - 1)) #define SUBSECTOR(block) (CURRENT->current_nr_sectors > 0) extern unsigned long hd_init(unsigned long mem_start, unsigned long mem_end); extern unsigned long cdu31a_init(unsigned long mem_start, unsigned long mem_end); extern unsigned long mcd_init(unsigned long mem_start, unsigned long mem_end); #ifdef CONFIG_SBPCD extern unsigned long sbpcd_init(unsigned long, unsigned long); #endif CONFIG_SBPCD extern void set_device_ro(int dev,int flag); extern void floppy_init(void); #ifdef FD_MODULE static #else extern #endif int new_floppy_init(void); extern void rd_load(void); extern long rd_init(long mem_start, int length); extern int ramdisk_size; extern unsigned long xd_init(unsigned long mem_start, unsigned long mem_end); #define RO_IOCTLS(dev,where) \ case BLKROSET: if (!suser()) return -EACCES; \ set_device_ro((dev),get_fs_long((long *) (where))); return 0; \ case BLKROGET: { int __err = verify_area(VERIFY_WRITE, (void *) (where), sizeof(long)); \ if (!__err) put_fs_long(0!=is_read_only(dev),(long *) (where)); return __err; } #ifdef MAJOR_NR /* * Add entries as needed. Currently the only block devices * supported are hard-disks and floppies. */ #if (MAJOR_NR == MEM_MAJOR) /* ram disk */ #define DEVICE_NAME "ramdisk" #define DEVICE_REQUEST do_rd_request #define DEVICE_NR(device) ((device) & 7) #define DEVICE_ON(device) #define DEVICE_OFF(device) #elif (MAJOR_NR == FLOPPY_MAJOR) static void floppy_off(unsigned int nr); #define DEVICE_NAME "floppy" #define DEVICE_INTR do_floppy #define DEVICE_REQUEST do_fd_request #define DEVICE_NR(device) ( ((device) & 3) | (((device) & 0x80 ) >> 5 )) #define DEVICE_ON(device) #define DEVICE_OFF(device) floppy_off(DEVICE_NR(device)) #elif (MAJOR_NR == HD_MAJOR) /* harddisk: timeout is 6 seconds.. */ #define DEVICE_NAME "harddisk" #define DEVICE_INTR do_hd #define DEVICE_TIMEOUT HD_TIMER #define TIMEOUT_VALUE 600 #define DEVICE_REQUEST do_hd_request #define DEVICE_NR(device) (MINOR(device)>>6) #define DEVICE_ON(device) #define DEVICE_OFF(device) #elif (MAJOR_NR == SCSI_DISK_MAJOR) #define DEVICE_NAME "scsidisk" #define DEVICE_INTR do_sd #define TIMEOUT_VALUE 200 #define DEVICE_REQUEST do_sd_request #define DEVICE_NR(device) (MINOR(device) >> 4) #define DEVICE_ON(device) #define DEVICE_OFF(device) #elif (MAJOR_NR == SCSI_TAPE_MAJOR) #define DEVICE_NAME "scsitape" #define DEVICE_INTR do_st #define DEVICE_NR(device) (MINOR(device)) #define DEVICE_ON(device) #define DEVICE_OFF(device) #elif (MAJOR_NR == SCSI_CDROM_MAJOR) #define DEVICE_NAME "CD-ROM" #define DEVICE_INTR do_sr #define DEVICE_REQUEST do_sr_request #define DEVICE_NR(device) (MINOR(device)) #define DEVICE_ON(device) #define DEVICE_OFF(device) #elif (MAJOR_NR == XT_DISK_MAJOR) #define DEVICE_NAME "xt disk" #define DEVICE_REQUEST do_xd_request #define DEVICE_NR(device) (MINOR(device) >> 6) #define DEVICE_ON(device) #define DEVICE_OFF(device) #elif (MAJOR_NR == CDU31A_CDROM_MAJOR) #define DEVICE_NAME "CDU31A" #define DEVICE_REQUEST do_cdu31a_request #define DEVICE_NR(device) (MINOR(device)) #define DEVICE_ON(device) #define DEVICE_OFF(device) #elif (MAJOR_NR == MITSUMI_CDROM_MAJOR) #define DEVICE_NAME "Mitsumi CD-ROM" /* #define DEVICE_INTR do_mcd */ #define DEVICE_REQUEST do_mcd_request #define DEVICE_NR(device) (MINOR(device)) #define DEVICE_ON(device) #define DEVICE_OFF(device) #elif (MAJOR_NR == MATSUSHITA_CDROM_MAJOR) #define DEVICE_NAME "Matsushita CD-ROM controller #1" #define DEVICE_REQUEST do_sbpcd_request #define DEVICE_NR(device) (MINOR(device)) #define DEVICE_ON(device) #define DEVICE_OFF(device) #elif (MAJOR_NR == MATSUSHITA_CDROM2_MAJOR) #define DEVICE_NAME "Matsushita CD-ROM controller #2" #define DEVICE_REQUEST do_sbpcd2_request #define DEVICE_NR(device) (MINOR(device)) #define DEVICE_ON(device) #define DEVICE_OFF(device) #elif (MAJOR_NR == MATSUSHITA_CDROM3_MAJOR) #define DEVICE_NAME "Matsushita CD-ROM controller #3" #define DEVICE_REQUEST do_sbpcd3_request #define DEVICE_NR(device) (MINOR(device)) #define DEVICE_ON(device) #define DEVICE_OFF(device) #elif (MAJOR_NR == MATSUSHITA_CDROM4_MAJOR) #define DEVICE_NAME "Matsushita CD-ROM controller #4" #define DEVICE_REQUEST do_sbpcd4_request #define DEVICE_NR(device) (MINOR(device)) #define DEVICE_ON(device) #define DEVICE_OFF(device) #endif #if (MAJOR_NR != SCSI_TAPE_MAJOR) #ifndef CURRENT #define CURRENT (blk_dev[MAJOR_NR].current_request) #endif #define CURRENT_DEV DEVICE_NR(CURRENT->dev) #ifdef DEVICE_INTR void (*DEVICE_INTR)(void) = NULL; #endif #ifdef DEVICE_TIMEOUT #define SET_TIMER \ ((timer_table[DEVICE_TIMEOUT].expires = jiffies + TIMEOUT_VALUE), \ (timer_active |= 1<errors = 0; if (!uptodate) { printk(DEVICE_NAME " I/O error\n"); printk("dev %04lX, sector %lu\n", (unsigned long)req->dev, req->sector); req->nr_sectors--; req->nr_sectors &= ~SECTOR_MASK; req->sector += (BLOCK_SIZE / 512); req->sector &= ~SECTOR_MASK; } if ((bh = req->bh) != NULL) { req->bh = bh->b_reqnext; bh->b_reqnext = NULL; bh->b_uptodate = uptodate; if (!uptodate) bh->b_req = 0; /* So no "Weird" errors */ unlock_buffer(bh); if ((bh = req->bh) != NULL) { req->current_nr_sectors = bh->b_size >> 9; if (req->nr_sectors < req->current_nr_sectors) { req->nr_sectors = req->current_nr_sectors; printk("end_request: buffer-list destroyed\n"); } req->buffer = bh->b_data; return; } } DEVICE_OFF(req->dev); CURRENT = req->next; if (req->sem != NULL) up(req->sem); req->dev = -1; wake_up(&wait_for_request); } #endif #ifdef DEVICE_INTR #define CLEAR_INTR SET_INTR(NULL) #else #define CLEAR_INTR #endif #define INIT_REQUEST \ if (!CURRENT) {\ CLEAR_INTR; \ return; \ } \ if (MAJOR(CURRENT->dev) != MAJOR_NR) \ panic(DEVICE_NAME ": request list destroyed"); \ if (CURRENT->bh) { \ if (!CURRENT->bh->b_lock) \ panic(DEVICE_NAME ": block not locked"); \ } #endif #endif #endif