#
# Character device configuration
#
mainmenu_option next_comment
comment 'Character devices'

bool 'Virtual terminal' CONFIG_VT
if [ "$CONFIG_VT" = "y" ]; then
   bool '  Support for console on virtual terminal' CONFIG_VT_CONSOLE
fi
tristate 'Standard/generic (dumb) serial support' CONFIG_SERIAL
if [ "$CONFIG_SERIAL" = "y" ]; then
   bool '  Support for console on serial port' CONFIG_SERIAL_CONSOLE
fi
bool 'Extended dumb serial driver options' CONFIG_SERIAL_EXTENDED
if [ "$CONFIG_SERIAL_EXTENDED" = "y" ]; then
   bool '  Support more than 4 serial ports' CONFIG_SERIAL_MANY_PORTS
   bool '  Support for sharing serial interrupts' CONFIG_SERIAL_SHARE_IRQ
   bool '  Autodetect IRQ on standard ports (unsafe)' CONFIG_SERIAL_DETECT_IRQ
   bool '  Support special multiport boards' CONFIG_SERIAL_MULTIPORT
   bool '  Support the Bell Technologies HUB6 card' CONFIG_HUB6
fi
bool 'Non-standard serial port support' CONFIG_SERIAL_NONSTANDARD
if [ "$CONFIG_SERIAL_NONSTANDARD" = "y" ]; then
   tristate '  Comtrol Rocketport support' CONFIG_ROCKETPORT
   tristate '  Digiboard Intelligent Async Support' CONFIG_DIGIEPCA
   if [ "$CONFIG_DIGIEPCA" = "n" ]; then
      tristate '  Digiboard PC/Xx Support' CONFIG_DIGI
   fi
   tristate '  Cyclades async mux support' CONFIG_CYCLADES
   if [ "$CONFIG_EXPERIMENTAL" = "y" -a "$CONFIG_CYCLADES" != "n" ]; then
      bool '    Cyclades-Z interrupt mode operation (EXPERIMENTAL)' CONFIG_CYZ_INTR
   fi
   bool '  Stallion multiport serial support' CONFIG_STALDRV
   if [ "$CONFIG_STALDRV" = "y" ]; then
     tristate '    Stallion EasyIO or EC8/32 support' CONFIG_STALLION
     tristate '    Stallion EC8/64, ONboard, Brumby support' CONFIG_ISTALLION
   fi
   tristate '  SDL RISCom/8 card support' CONFIG_RISCOM8
   tristate '  Computone IntelliPort Plus serial support' CONFIG_COMPUTONE
   tristate '  Specialix IO8+ card support' CONFIG_SPECIALIX
   if [ "$CONFIG_SPECIALIX" != "n" ]; then
      bool '  Specialix DTR/RTS pin is RTS' CONFIG_SPECIALIX_RTSCTS
   fi 
   tristate '  Specialix SX (and SI) card support' CONFIG_SX
   tristate '  Hayes ESP serial port support' CONFIG_ESPSERIAL
   if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
      dep_tristate '  Multi-Tech multiport card support (EXPERIMENTAL)' CONFIG_ISI m
   fi
   dep_tristate '  Microgate SyncLink card support' CONFIG_SYNCLINK m
   dep_tristate '  HDLC line discipline support' CONFIG_N_HDLC m
fi
bool 'Unix98 PTY support' CONFIG_UNIX98_PTYS
if [ "$CONFIG_UNIX98_PTYS" = "y" ]; then
   int 'Maximum number of Unix98 PTYs in use (0-2048)' CONFIG_UNIX98_PTY_COUNT 256
fi
if [ "$CONFIG_PARPORT" != "n" ]; then
   dep_tristate 'Parallel printer support' CONFIG_PRINTER $CONFIG_PARPORT
   if [ "$CONFIG_PRINTER" != "n" ]; then
      bool '  Support for console on line printer' CONFIG_LP_CONSOLE
   fi
   dep_tristate 'Support for user-space parallel port device drivers' CONFIG_PPDEV $CONFIG_PARPORT
fi

mainmenu_option next_comment
comment 'Mice'
tristate 'Bus Mouse Support' CONFIG_BUSMOUSE
if [ "$CONFIG_BUSMOUSE" != "n" ]; then
   dep_tristate '  ATIXL busmouse support' CONFIG_ATIXL_BUSMOUSE $CONFIG_BUSMOUSE
   dep_tristate '  Logitech busmouse support' CONFIG_LOGIBUSMOUSE $CONFIG_BUSMOUSE
   dep_tristate '  Microsoft busmouse support' CONFIG_MS_BUSMOUSE $CONFIG_BUSMOUSE
   if [ "$CONFIG_ADB" = "y" ]; then
      dep_tristate '  Apple Desktop Bus mouse support' CONFIG_ADBMOUSE $CONFIG_BUSMOUSE
   fi
fi

tristate 'Mouse Support (not serial and bus mice)' CONFIG_MOUSE
if [ "$CONFIG_MOUSE" != "n" ]; then
   bool '  PS/2 mouse (aka "auxiliary device") support' CONFIG_PSMOUSE
   tristate '  C&T 82C710 mouse port support (as on TI Travelmate)' CONFIG_82C710_MOUSE
   tristate '  PC110 digitizer pad support' CONFIG_PC110_PAD
fi
endmenu

tristate 'QIC-02 tape support' CONFIG_QIC02_TAPE
if [ "$CONFIG_QIC02_TAPE" != "n" ]; then
   bool '  Do you want runtime configuration for QIC-02' CONFIG_QIC02_DYNCONF
   if [ "$CONFIG_QIC02_DYNCONF" != "y" ]; then
      comment '  Edit configuration parameters in ./include/linux/tpqic02.h!'
   else
      comment '  Setting runtime QIC-02 configuration is done with qic02conf'
      comment '  from the tpqic02-support package.  It is available at'
      comment '  metalab.unc.edu or ftp://titus.cfw.com/pub/Linux/util/'
   fi
fi

mainmenu_option next_comment
comment 'Watchdog Cards'
bool 'Watchdog Timer Support'	CONFIG_WATCHDOG
if [ "$CONFIG_WATCHDOG" != "n" ]; then
   bool '  Disable watchdog shutdown on close' CONFIG_WATCHDOG_NOWAYOUT
   tristate '  WDT Watchdog timer' CONFIG_WDT
   if [ "$CONFIG_WDT" != "n" ]; then
      bool '    WDT501 features' CONFIG_WDT_501
      if [ "$CONFIG_WDT_501" = "y" ]; then
         bool '      Fan Tachometer' CONFIG_WDT_501_FAN
      fi
   fi
   tristate '  Software Watchdog' CONFIG_SOFT_WATCHDOG
   tristate '  Berkshire Products PC Watchdog' CONFIG_PCWATCHDOG
   tristate '  Acquire SBC Watchdog Timer' CONFIG_ACQUIRE_WDT
fi
endmenu


tristate '/dev/nvram support' CONFIG_NVRAM
bool 'Enhanced Real Time Clock Support' CONFIG_RTC
if [ "$CONFIG_ALPHA_BOOK1" = "y" ]; then
   bool 'Tadpole ANA H8 Support'  CONFIG_H8
fi

mainmenu_option next_comment
comment 'Video For Linux'

tristate 'Video For Linux' CONFIG_VIDEO_DEV
if [ "$CONFIG_VIDEO_DEV" != "n" ]; then
   dep_tristate '  I2C on parallel port' CONFIG_I2C_PARPORT $CONFIG_PARPORT
   comment 'Radio/Video Adapters'
   dep_tristate '  ADS Cadet AM/FM Tuner' CONFIG_RADIO_CADET $CONFIG_VIDEO_DEV
   dep_tristate '  AIMSlab RadioTrack (aka RadioReveal) support' CONFIG_RADIO_RTRACK $CONFIG_VIDEO_DEV
   if [ "$CONFIG_RADIO_RTRACK" = "y" ]; then
      hex '  RadioTrack i/o port (0x20f or 0x30f)' CONFIG_RADIO_RTRACK_PORT 20f
   fi
   dep_tristate '  AIMSlab RadioTrack II support' CONFIG_RADIO_RTRACK2 $CONFIG_VIDEO_DEV
   if [ "$CONFIG_RADIO_RTRACK2" = "y" ]; then
      hex '    RadioTrack II i/o port (0x20c or 0x30c)' CONFIG_RADIO_RTRACK2_PORT 30c
   fi
   dep_tristate '  Aztech/Packard Bell Radio' CONFIG_RADIO_AZTECH $CONFIG_VIDEO_DEV
   if [ "$CONFIG_RADIO_AZTECH" = "y" ]; then
      hex '    Aztech/Packard Bell I/O port (0x350 or 0x358)' CONFIG_RADIO_AZTECH_PORT 350
   fi
   if [ "$CONFIG_PCI" != "n" ]; then
      dep_tristate '  BT848 Video For Linux' CONFIG_VIDEO_BT848 $CONFIG_VIDEO_DEV
   fi
   dep_tristate '  GemTek Radio Card support' CONFIG_RADIO_GEMTEK $CONFIG_VIDEO_DEV
   if [ "$CONFIG_RADIO_GEMTEK" = "y" ]; then
      hex '    GemTek i/o port (0x20c, 0x30c, 0x24c or 0x34c)' CONFIG_RADIO_GEMTEK_PORT 34c
   fi
   dep_tristate '  Mediavision Pro Movie Studio Video For Linux' CONFIG_VIDEO_PMS $CONFIG_VIDEO_DEV
   dep_tristate '  Miro PCM20 Radio' CONFIG_RADIO_MIROPCM20 $CONFIG_VIDEO_DEV
   if [ "$CONFIG_PMAC" = "y" ]; then
      dep_tristate '  PlanB Video-In on PowerMac' CONFIG_VIDEO_PLANB $CONFIG_VIDEO_DEV
   fi
   if [ "$CONFIG_PARPORT" != "n" ]; then
      dep_tristate '  Quickcam BW Video For Linux' CONFIG_VIDEO_BWQCAM $CONFIG_VIDEO_DEV $CONFIG_PARPORT
      if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
	 dep_tristate '  QuickCam Colour Video For Linux (EXPERIMENTAL)' CONFIG_VIDEO_CQCAM $CONFIG_VIDEO_DEV $CONFIG_PARPORT
      fi
   fi
   dep_tristate '  SAA5249 Teletext processor' CONFIG_VIDEO_SAA5249 $CONFIG_VIDEO_DEV
   dep_tristate '  SF16FMI Radio' CONFIG_RADIO_SF16FMI $CONFIG_VIDEO_DEV
   if [ "$CONFIG_RADIO_SF16FMI" = "y" ]; then
      hex '    SF16FMI I/O port (0x284 or 0x384)' CONFIG_RADIO_SF16FMI_PORT 284
   fi
   if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
      if [ "$CONFIG_SGI" = "y" ]; then
	 dep_tristate '  SGI Vino Video For Linux (EXPERIMENTAL)' CONFIG_VIDEO_VINO $CONFIG_VIDEO_DEV
      fi
   fi
   if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
      dep_tristate '  Stradis 4:2:2 MPEG-2 video driver  (EXPERIMENTAL)' CONFIG_VIDEO_STRADIS $CONFIG_VIDEO_DEV
   fi
   dep_tristate '  TerraTec ActiveRadio ISA Standalone' CONFIG_RADIO_TERRATEC $CONFIG_VIDEO_DEV
   if [ "$CONFIG_RADIO_TERRATEC" = "y" ]; then
      hex '    Terratec i/o port (normally 0x590)' CONFIG_RADIO_TERRATEC_PORT 590
   fi
   dep_tristate '  Trust FM radio card' CONFIG_RADIO_TRUST $CONFIG_VIDEO_DEV
   if [ "$CONFIG_RADIO_TRUST" = "y" ]; then
      hex '    Trust i/o port (usually 0x350 or 0x358)' CONFIG_RADIO_TRUST_PORT 350
   fi
   dep_tristate '  Typhoon Radio (a.k.a. EcoRadio)' CONFIG_RADIO_TYPHOON $CONFIG_VIDEO_DEV
   if [ "$CONFIG_PROC_FS" = "y" ]; then
      if [ "$CONFIG_RADIO_TYPHOON" != "n" ]; then
	 bool '    Support for /proc/radio-typhoon' CONFIG_RADIO_TYPHOON_PROC_FS
      fi
   fi
   if [ "$CONFIG_RADIO_TYPHOON" = "y" ]; then
      hex '  Typhoon I/O port (0x316 or 0x336)' CONFIG_RADIO_TYPHOON_PORT 316
      int '  Typhoon frequency set when muting the device (kHz)' CONFIG_RADIO_TYPHOON_MUTEFREQ 87500
   fi
   dep_tristate '  Zoltrix Radio' CONFIG_RADIO_ZOLTRIX $CONFIG_VIDEO_DEV
   if [ "$CONFIG_RADIO_ZOLTRIX" = "y" ]; then
      hex '    ZOLTRIX I/O port (0x20c or 0x30c)' CONFIG_RADIO_ZOLTRIX_PORT 20c
   fi
   dep_tristate '  Zoran ZR36057/36060 support' CONFIG_VIDEO_ZORAN $CONFIG_VIDEO_DEV
   dep_tristate '    Include support for Iomega Buz' CONFIG_VIDEO_BUZ $CONFIG_VIDEO_ZORAN
fi

endmenu

mainmenu_option next_comment
comment 'Joystick support'

tristate 'Joystick support' CONFIG_JOYSTICK
if [ "$CONFIG_JOYSTICK" != "n" ]; then
   source drivers/char/joystick/Config.in
fi
endmenu

tristate 'Double Talk PC internal speech card support' CONFIG_DTLK

tristate 'Siemens R3964 line discipline' CONFIG_R3964
tristate 'Applicom intelligent fieldbus card support' CONFIG_APPLICOM

mainmenu_option next_comment
comment 'Ftape, the floppy tape device driver'
tristate 'Ftape (QIC-80/Travan) support' CONFIG_FTAPE
if [ "$CONFIG_FTAPE" != "n" ]; then
   source drivers/char/ftape/Config.in
fi
endmenu

if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
   bool 'Direct Rendering Manager (XFree86 DRI support) (EXPERIMENTAL)' CONFIG_DRM
   if [ "$CONFIG_DRM" = "y" ]; then
      dep_tristate '  3dlabs GMX 2000' CONFIG_DRM_GAMMA m
   fi
fi

if [ "$CONFIG_PCMCIA" != "n" ]; then
   source drivers/char/pcmcia/Config.in
fi

endmenu