/* ** ----------------------------------------------------------------------------- ** ** Perle Specialix driver for Linux ** Ported from existing RIO Driver for SCO sources. * * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. ** ** Module : rioroute.c ** SID : 1.3 ** Last Modified : 11/6/98 10:33:46 ** Retrieved : 11/6/98 10:33:50 ** ** ident @(#)rioroute.c 1.3 ** ** ----------------------------------------------------------------------------- */ #ifdef SCCS_LABELS static char *_rioroute_c_sccs_ = "@(#)rioroute.c 1.3"; #endif #define __NO_VERSION__ #include #include #include #include #include #include #include #include #include #include #include #include #include "linux_compat.h" #include "rio_linux.h" #include "typdef.h" #include "pkt.h" #include "daemon.h" #include "rio.h" #include "riospace.h" #include "top.h" #include "cmdpkt.h" #include "map.h" #include "riotypes.h" #include "rup.h" #include "port.h" #include "riodrvr.h" #include "rioinfo.h" #include "func.h" #include "errors.h" #include "pci.h" #include "parmmap.h" #include "unixrup.h" #include "board.h" #include "host.h" #include "error.h" #include "phb.h" #include "link.h" #include "cmdblk.h" #include "route.h" #include "control.h" #include "cirrus.h" #include "rioioctl.h" #include "param.h" #include "list.h" #include "sam.h" /* ** Incoming on the ROUTE_RUP ** I wrote this while I was tired. Forgive me. */ int RIORouteRup( struct rio_info *p, uint Rup, struct Host *HostP, PKT *PacketP ) { struct PktCmd *PktCmdP = (struct PktCmd *)PacketP->data; struct PktCmd_M *PktReplyP; struct CmdBlk *CmdBlkP; struct Port *PortP; struct Map *MapP; struct Top *TopP; int ThisLink, ThisLinkMin, ThisLinkMax; int port; int Mod, Mod1, Mod2; ushort RtaType; uint RtaUniq; uint ThisUnit, ThisUnit2; /* 2 ids to accommodate 16 port RTA */ uint OldUnit, NewUnit, OldLink, NewLink; char *MyType, *MyName; int Lies; unsigned long flags; #ifdef STACK RIOStackCheck("RIORouteRup"); #endif #ifdef CHECK CheckPacketP(PacketP); CheckHostP(HostP); CheckRup(Rup); CheckHost(Host); #endif /* ** Is this unit telling us it's current link topology? */ if ( RBYTE(PktCmdP->Command) == ROUTE_TOPOLOGY ) { MapP = HostP->Mapping; /* ** The packet can be sent either by the host or by an RTA. ** If it comes from the host, then we need to fill in the ** Topology array in the host structure. If it came in ** from an RTA then we need to fill in the Mapping structure's ** Topology array for the unit. */ if ( Rup >= (ushort)MAX_RUP ) { ThisUnit = HOST_ID; TopP = HostP->Topology; MyType = "Host"; MyName = HostP->Name; ThisLinkMin = ThisLinkMax = Rup - MAX_RUP; } else { ThisUnit = Rup+1; TopP = HostP->Mapping[Rup].Topology; MyType = "RTA"; MyName = HostP->Mapping[Rup].Name; ThisLinkMin = 0; ThisLinkMax = LINKS_PER_UNIT - 1; } /* ** Lies will not be tolerated. ** If any pair of links claim to be connected to the same ** place, then ignore this packet completely. */ Lies = 0; for ( ThisLink=ThisLinkMin + 1; ThisLink <= ThisLinkMax; ThisLink++) { /* ** it won't lie about network interconnect, total disconnects ** and no-IDs. (or at least, it doesn't *matter* if it does) */ if ( RBYTE(PktCmdP->RouteTopology[ThisLink].Unit) > (ushort)MAX_RUP ) continue; for ( NewLink=ThisLinkMin; NewLink < ThisLink; NewLink++ ) { if ( (RBYTE(PktCmdP->RouteTopology[ThisLink].Unit) == RBYTE(PktCmdP->RouteTopology[NewLink].Unit)) && (RBYTE(PktCmdP->RouteTopology[ThisLink].Link) == RBYTE(PktCmdP->RouteTopology[NewLink].Link)) ) { Lies++; } } } if ( Lies ) { rio_dprint(RIO_DEBUG_ROUTE, ("LIES! DAMN LIES! %d LIES!\n",Lies)); rio_dprint(RIO_DEBUG_ROUTE, ("%d:%c %d:%c %d:%c %d:%c\n", RBYTE(PktCmdP->RouteTopology[0].Unit), 'A'+RBYTE(PktCmdP->RouteTopology[0].Link), RBYTE(PktCmdP->RouteTopology[1].Unit), 'A'+RBYTE(PktCmdP->RouteTopology[1].Link), RBYTE(PktCmdP->RouteTopology[2].Unit), 'A'+RBYTE(PktCmdP->RouteTopology[2].Link), RBYTE(PktCmdP->RouteTopology[3].Unit), 'A'+RBYTE(PktCmdP->RouteTopology[3].Link))); return TRUE; } /* ** now, process each link. */ for ( ThisLink=ThisLinkMin; ThisLink <= ThisLinkMax; ThisLink++) { /* ** this is what it was connected to */ OldUnit = TopP[ThisLink].Unit; OldLink = TopP[ThisLink].Link; /* ** this is what it is now connected to */ NewUnit = RBYTE(PktCmdP->RouteTopology[ThisLink].Unit); NewLink = RBYTE(PktCmdP->RouteTopology[ThisLink].Link); if ( OldUnit != NewUnit || OldLink != NewLink ) { /* ** something has changed! */ if ( NewUnit > MAX_RUP && NewUnit != ROUTE_DISCONNECT && NewUnit != ROUTE_NO_ID && NewUnit != ROUTE_INTERCONNECT ) { rio_dprint(RIO_DEBUG_ROUTE, ("I have a link from %s %s to unit %d:%d - I don't like it.\n", MyType, MyName, NewUnit, NewLink)); } else { /* ** put the new values in */ TopP[ThisLink].Unit = NewUnit; TopP[ThisLink].Link = NewLink; RIOSetChange(p); if ( OldUnit <= MAX_RUP ) { /* ** If something has become bust, then re-enable them messages */ if (! p->RIONoMessage) RIOConCon(p,HostP,ThisUnit,ThisLink,OldUnit,OldLink,DISCONNECT); } if ( ( NewUnit <= MAX_RUP ) && !p->RIONoMessage ) RIOConCon(p,HostP,ThisUnit,ThisLink,NewUnit,NewLink,CONNECT); if ( NewUnit == ROUTE_NO_ID ) rio_dprint(RIO_DEBUG_ROUTE, ("%s %s (%c) is connected to an unconfigured unit.\n", MyType,MyName,'A'+ThisLink)); if ( NewUnit == ROUTE_INTERCONNECT ) { if (! p->RIONoMessage) cprintf("%s '%s' (%c) is connected to another network.\n", MyType,MyName,'A'+ThisLink); } /* ** perform an update for 'the other end', so that these messages ** only appears once. Only disconnect the other end if it is pointing ** at us! */ if ( OldUnit == HOST_ID ) { if ( HostP->Topology[OldLink].Unit == ThisUnit && HostP->Topology[OldLink].Link == ThisLink ) { rio_dprint(RIO_DEBUG_ROUTE, ("SETTING HOST (%c) TO DISCONNECTED!\n", OldLink+'A')); HostP->Topology[OldLink].Unit = ROUTE_DISCONNECT; HostP->Topology[OldLink].Link = NO_LINK; } else { rio_dprint(RIO_DEBUG_ROUTE, ("HOST(%c) WAS NOT CONNECTED TO %s (%c)!\n", OldLink+'A',HostP->Mapping[ThisUnit-1].Name,ThisLink+'A')); } } else if ( OldUnit <= MAX_RUP ) { if ( HostP->Mapping[OldUnit-1].Topology[OldLink].Unit == ThisUnit && HostP->Mapping[OldUnit-1].Topology[OldLink].Link == ThisLink ) { rio_dprint(RIO_DEBUG_ROUTE, ("SETTING RTA %s (%c) TO DISCONNECTED!\n", HostP->Mapping[OldUnit-1].Name,OldLink+'A')); HostP->Mapping[OldUnit-1].Topology[OldLink].Unit=ROUTE_DISCONNECT; HostP->Mapping[OldUnit-1].Topology[OldLink].Link=NO_LINK; } else { rio_dprint(RIO_DEBUG_ROUTE, ("RTA %s (%c) WAS NOT CONNECTED TO %s (%c)\n", HostP->Mapping[OldUnit-1].Name,OldLink+'A', HostP->Mapping[ThisUnit-1].Name,ThisLink+'A')); } } if ( NewUnit == HOST_ID ) { rio_dprint(RIO_DEBUG_ROUTE, ("MARKING HOST (%c) CONNECTED TO %s (%c)\n", NewLink+'A',MyName,ThisLink+'A')); HostP->Topology[NewLink].Unit = ThisUnit; HostP->Topology[NewLink].Link = ThisLink; } else if ( NewUnit <= MAX_RUP ) { rio_dprint(RIO_DEBUG_ROUTE, ("MARKING RTA %s (%c) CONNECTED TO %s (%c)\n", HostP->Mapping[NewUnit-1].Name,NewLink+'A',MyName,ThisLink+'A')); HostP->Mapping[NewUnit-1].Topology[NewLink].Unit=ThisUnit; HostP->Mapping[NewUnit-1].Topology[NewLink].Link=ThisLink; } } RIOSetChange(p); RIOCheckIsolated(p, HostP, OldUnit ); } } return TRUE; } /* ** The only other command we recognise is a route_request command */ if ( RBYTE(PktCmdP->Command) != ROUTE_REQUEST ) { rio_dprint(RIO_DEBUG_ROUTE, ("Unknown command %d received on rup %d host %d ROUTE_RUP\n", RBYTE(PktCmdP->Command),Rup,(int)HostP)); return TRUE; } RtaUniq = (RBYTE(PktCmdP->UniqNum[0])) + (RBYTE(PktCmdP->UniqNum[1]) << 8) + (RBYTE(PktCmdP->UniqNum[2]) << 16) + (RBYTE(PktCmdP->UniqNum[3]) << 24); /* ** Determine if 8 or 16 port RTA */ RtaType = GetUnitType(RtaUniq); rio_dprint(RIO_DEBUG_ROUTE, ("Received a request for an ID for serial number %x\n", RtaUniq)); Mod = RBYTE(PktCmdP->ModuleTypes); Mod1 = LONYBLE(Mod); if (RtaType == TYPE_RTA16) { /* ** Only one ident is set for a 16 port RTA. To make compatible ** with 8 port, set 2nd ident in Mod2 to the same as Mod1. */ Mod2 = Mod1; rio_dprint(RIO_DEBUG_ROUTE, ("Backplane type is %s (all ports)\n", p->RIOModuleTypes[Mod1].Name )); } else { Mod2 = HINYBLE(Mod); rio_dprint(RIO_DEBUG_ROUTE, ("Module types are %s (ports 0-3) and %s (ports 4-7)\n", p->RIOModuleTypes[Mod1].Name, p->RIOModuleTypes[Mod2].Name )); } if ( RtaUniq == 0xffffffff ) { ShowPacket( DBG_SPECIAL, PacketP ); } /* ** try to unhook a command block from the command free list. */ if ( !(CmdBlkP = RIOGetCmdBlk()) ) { rio_dprint(RIO_DEBUG_ROUTE, ("No command blocks to route RTA! come back later.\n")); return 0; } /* ** Fill in the default info on the command block */ CmdBlkP->Packet.dest_unit = Rup; CmdBlkP->Packet.dest_port = ROUTE_RUP; CmdBlkP->Packet.src_unit = HOST_ID; CmdBlkP->Packet.src_port = ROUTE_RUP; CmdBlkP->Packet.len = PKT_CMD_BIT | 1; CmdBlkP->PreFuncP = CmdBlkP->PostFuncP = NULL; PktReplyP = (struct PktCmd_M *)CmdBlkP->Packet.data; if (! RIOBootOk(p, HostP, RtaUniq)) { rio_dprint(RIO_DEBUG_ROUTE, ("RTA %x tried to get an ID, but does not belong - FOAD it!\n", RtaUniq)); PktReplyP->Command = ROUTE_FOAD; HostP->Copy("RT_FOAD", PktReplyP->CommandText, 7); RIOQueueCmdBlk(HostP, Rup, CmdBlkP); return TRUE; } /* ** Check to see if the RTA is configured for this host */ for ( ThisUnit=0; ThisUnitMapping[ThisUnit].Flags & SLOT_IN_USE ? "Slot-In-Use":"Not In Use", HostP->Mapping[ThisUnit].Flags & SLOT_TENTATIVE ? "Slot-Tentative":"Not Tentative", HostP->Mapping[ThisUnit].RtaUniqueNum )); /* ** We have an entry for it. */ if ( (HostP->Mapping[ThisUnit].Flags & (SLOT_IN_USE | SLOT_TENTATIVE)) && (HostP->Mapping[ThisUnit].RtaUniqueNum == RtaUniq) ) { if (RtaType == TYPE_RTA16) { ThisUnit2 = HostP->Mapping[ThisUnit].ID2 - 1; rio_dprint(RIO_DEBUG_ROUTE, ("Found unit 0x%x at slots %d+%d\n", RtaUniq,ThisUnit,ThisUnit2)); } else rio_dprint(RIO_DEBUG_ROUTE, ("Found unit 0x%x at slot %d\n", RtaUniq,ThisUnit)); /* ** If we have no knowledge of booting it, then the host has ** been re-booted, and so we must kill the RTA, so that it ** will be booted again (potentially with new bins) ** and it will then re-ask for an ID, which we will service. */ if ( (HostP->Mapping[ThisUnit].Flags & SLOT_IN_USE) && !(HostP->Mapping[ThisUnit].Flags & RTA_BOOTED) ) { if ( !(HostP->Mapping[ThisUnit].Flags & MSG_DONE) ) { if ( !p->RIONoMessage ) cprintf("RTA '%s' is being updated.\n",HostP->Mapping[ThisUnit].Name); HostP->Mapping[ThisUnit].Flags |= MSG_DONE; } PktReplyP->Command = ROUTE_FOAD; HostP->Copy("RT_FOAD",PktReplyP->CommandText,7); RIOQueueCmdBlk(HostP, Rup, CmdBlkP); return TRUE; } /* ** Send the ID (entry) to this RTA. The ID number is implicit as ** the offset into the table. It is worth noting at this stage ** that offset zero in the table contains the entries for the ** RTA with ID 1!!!! */ PktReplyP->Command = ROUTE_ALLOCATE; PktReplyP->IDNum = ThisUnit+1; if (RtaType == TYPE_RTA16) { if (HostP->Mapping[ThisUnit].Flags & SLOT_IN_USE) /* ** Adjust the phb and tx pkt dest_units for 2nd block of 8 ** only if the RTA has ports associated (SLOT_IN_USE) */ RIOFixPhbs(p, HostP, ThisUnit2); PktReplyP->IDNum2 = ThisUnit2+1; rio_dprint(RIO_DEBUG_ROUTE, ("RTA '%s' has been allocated IDs %d+%d\n", HostP->Mapping[ThisUnit].Name, PktReplyP->IDNum, PktReplyP->IDNum2)); } else { PktReplyP->IDNum2 = ROUTE_NO_ID; rio_dprint(RIO_DEBUG_ROUTE, ("RTA '%s' has been allocated ID %d\n", HostP->Mapping[ThisUnit].Name,PktReplyP->IDNum)); } HostP->Copy("RT_ALLOCAT",PktReplyP->CommandText,10); RIOQueueCmdBlk( HostP, Rup, CmdBlkP); /* ** If this is a freshly booted RTA, then we need to re-open ** the ports, if any where open, so that data may once more ** flow around the system! */ if ( (HostP->Mapping[ThisUnit].Flags & RTA_NEWBOOT) && (HostP->Mapping[ThisUnit].SysPort != NO_PORT) ) { /* ** look at the ports associated with this beast and ** see if any where open. If they was, then re-open ** them, using the info from the tty flags. */ for ( port=0; portRIOPortp[port+HostP->Mapping[ThisUnit].SysPort]; if ( PortP->State & (RIO_MOPEN|RIO_LOPEN) ) { rio_dprint(RIO_DEBUG_ROUTE, ("Re-opened this port\n")); rio_spin_lock_irqsave(&PortP->portSem, flags); PortP->MagicFlags |= MAGIC_REBOOT; rio_spin_unlock_irqrestore(&PortP->portSem, flags); } } if (RtaType == TYPE_RTA16) { for ( port=0; portRIOPortp[port+HostP->Mapping[ThisUnit2].SysPort]; if ( PortP->State & (RIO_MOPEN|RIO_LOPEN) ) { rio_dprint(RIO_DEBUG_ROUTE, ("Re-opened this port\n")); rio_spin_lock_irqsave(&PortP->portSem, flags); PortP->MagicFlags |= MAGIC_REBOOT; rio_spin_unlock_irqrestore(&PortP->portSem, flags); } } } } /* ** keep a copy of the module types! */ HostP->UnixRups[ThisUnit].ModTypes = Mod; if (RtaType == TYPE_RTA16) HostP->UnixRups[ThisUnit2].ModTypes = Mod; /* ** If either of the modules on this unit is read-only or write-only ** or none-xprint, then we need to transfer that info over to the ** relevent ports. */ if ( HostP->Mapping[ThisUnit].SysPort != NO_PORT ) { for ( port=0; portRIOPortp[port+HostP->Mapping[ThisUnit].SysPort]->Config &= ~RIO_NOMASK; p->RIOPortp[port+HostP->Mapping[ThisUnit].SysPort]->Config |= p->RIOModuleTypes[Mod1].Flags[port]; p->RIOPortp[port+PORTS_PER_MODULE+HostP->Mapping[ThisUnit].SysPort]->Config &= ~RIO_NOMASK; p->RIOPortp[port+PORTS_PER_MODULE+HostP->Mapping[ThisUnit].SysPort]->Config |= p->RIOModuleTypes[Mod2].Flags[port]; } if (RtaType == TYPE_RTA16) { for ( port=0; portRIOPortp[port+HostP->Mapping[ThisUnit2].SysPort]->Config &= ~RIO_NOMASK; p->RIOPortp[port+HostP->Mapping[ThisUnit2].SysPort]->Config |= p->RIOModuleTypes[Mod1].Flags[port]; p->RIOPortp[port+PORTS_PER_MODULE+HostP->Mapping[ThisUnit2].SysPort]->Config &= ~RIO_NOMASK; p->RIOPortp[port+PORTS_PER_MODULE+HostP->Mapping[ThisUnit2].SysPort]->Config |= p->RIOModuleTypes[Mod2].Flags[port]; } } } /* ** Job done, get on with the interrupts! */ return TRUE; } } /* ** There is no table entry for this RTA at all. ** ** Lets check to see if we actually booted this unit - if not, ** then we reset it and it will go round the loop of being booted ** we can then worry about trying to fit it into the table. */ for ( ThisUnit=0; ThisUnitNumExtraBooted; ThisUnit++ ) if ( HostP->ExtraUnits[ThisUnit] == RtaUniq ) break; if ( ThisUnit == HostP->NumExtraBooted && ThisUnit != MAX_EXTRA_UNITS ) { /* ** if the unit wasn't in the table, and the table wasn't full, then ** we reset the unit, because we didn't boot it. ** However, if the table is full, it could be that we did boot ** this unit, and so we won't reboot it, because it isn't really ** all that disasterous to keep the old bins in most cases. This ** is a rather tacky feature, but we are on the edge of reallity ** here, because the implication is that someone has connected ** 16+MAX_EXTRA_UNITS onto one host. */ static int UnknownMesgDone = 0; if ( !UnknownMesgDone ) { if (! p->RIONoMessage) cprintf("One or more unknown RTAs are being updated.\n"); UnknownMesgDone = 1; } PktReplyP->Command = ROUTE_FOAD; HostP->Copy("RT_FOAD",PktReplyP->CommandText,7); } else { /* ** we did boot it (as an extra), and there may now be a table ** slot free (because of a delete), so we will try to make ** a tentative entry for it, so that the configurator can see it ** and fill in the details for us. */ if (RtaType == TYPE_RTA16) { if (RIOFindFreeID(p, HostP, &ThisUnit, &ThisUnit2) == 0) { RIODefaultName(p, HostP, ThisUnit); FillSlot(ThisUnit, ThisUnit2, RtaUniq, HostP); } } else { if (RIOFindFreeID(p, HostP, &ThisUnit, NULL) == 0) { RIODefaultName(p, HostP, ThisUnit); FillSlot(ThisUnit, 0, RtaUniq, HostP); } } PktReplyP->Command = ROUTE_USED; HostP->Copy("RT_USED",PktReplyP->CommandText,7); } RIOQueueCmdBlk( HostP, Rup, CmdBlkP); return TRUE; } void RIOFixPhbs(p, HostP, unit) struct rio_info *p; struct Host *HostP; uint unit; { ushort link, port; struct Port *PortP; unsigned long flags; int PortN = HostP->Mapping[unit].SysPort; rio_dprint(RIO_DEBUG_ROUTE, ("RIOFixPhbs unit %d sysport %d\n", unit, PortN)); if (PortN != -1) { ushort dest_unit = HostP->Mapping[unit].ID2; /* ** Get the link number used for the 1st 8 phbs on this unit. */ PortP = p->RIOPortp[HostP->Mapping[dest_unit - 1].SysPort]; link = RWORD(PortP->PhbP->link); for (port = 0; port < PORTS_PER_RTA; port++, PortN++) { ushort dest_port = port + 8; #if 0 uint PktInt; #endif WORD *TxPktP; PKT *Pkt; PortP = p->RIOPortp[PortN]; rio_spin_lock_irqsave(&PortP->portSem, flags); /* ** If RTA is not powered on, the tx packets will be ** unset, so go no further. */ if (PortP->TxStart == 0) { rio_dprint(RIO_DEBUG_ROUTE, ("Tx pkts not set up yet\n")); break; } /* ** For the second slot of a 16 port RTA, the driver needs to ** sort out the phb to port mappings. The dest_unit for this ** group of 8 phbs is set to the dest_unit of the accompanying ** 8 port block. The dest_port of the second unit is set to ** be in the range 8-15 (i.e. 8 is added). Thus, for a 16 port ** RTA with IDs 5 and 6, traffic bound for port 6 of unit 6 ** (being the second map ID) will be sent to dest_unit 5, port ** 14. When this RTA is deleted, dest_unit for ID 6 will be ** restored, and the dest_port will be reduced by 8. ** Transmit packets also have a destination field which needs ** adjusting in the same manner. ** Note that the unit/port bytes in 'dest' are swapped. ** We also need to adjust the phb and rup link numbers for the ** second block of 8 ttys. */ for (TxPktP = PortP->TxStart; TxPktP <= PortP->TxEnd; TxPktP++) { /* ** *TxPktP is the pointer to the transmit packet on the host ** card. This needs to be translated into a 32 bit pointer ** so it can be accessed from the driver. */ Pkt = (PKT *) RIO_PTR(HostP->Caddr,RINDW(TxPktP)); /* ** If the packet is used, reset it. */ Pkt = (PKT *)((uint)Pkt & ~PKT_IN_USE); WBYTE(Pkt->dest_unit, dest_unit); WBYTE(Pkt->dest_port, dest_port); } rio_dprint(RIO_DEBUG_ROUTE, ("phb dest: Old %x:%x New %x:%x\n", RWORD(PortP->PhbP->destination) & 0xff, (RWORD(PortP->PhbP->destination) >> 8) & 0xff, dest_unit, dest_port)); WWORD(PortP->PhbP->destination, dest_unit + (dest_port << 8)); WWORD(PortP->PhbP->link, link); rio_spin_unlock_irqrestore(&PortP->portSem, flags); } /* ** Now make sure the range of ports to be serviced includes ** the 2nd 8 on this 16 port RTA. */ if (link > 3) return; if (((unit * 8) + 7) > RWORD(HostP->LinkStrP[link].last_port)) { rio_dprint(RIO_DEBUG_ROUTE, ("last port on host link %d: %d\n", link, (unit * 8) + 7)); WWORD(HostP->LinkStrP[link].last_port, (unit * 8) + 7); } } } /* ** Check to see if the new disconnection has isolated this unit. ** If it has, then invalidate all its link information, and tell ** the world about it. This is done to ensure that the configurator ** only gets up-to-date information about what is going on. */ int RIOCheckIsolated(p, HostP, UnitId) struct rio_info * p; struct Host *HostP; uint UnitId; { unsigned long flags; rio_spin_lock_irqsave(&HostP->HostLock, flags); #ifdef CHECK CheckHostP( HostP ); CheckUnitId( UnitId ); #endif if ( RIOCheck( HostP, UnitId ) ) { rio_dprint(RIO_DEBUG_ROUTE, ("Unit %d is NOT isolated\n",UnitId)); rio_spin_unlock_irqrestore(&HostP->HostLock, flags); return(0); } RIOIsolate(p, HostP, UnitId ); RIOSetChange(p); rio_spin_unlock_irqrestore(&HostP->HostLock, flags); return 1; } /* ** Invalidate all the link interconnectivity of this unit, and of ** all the units attached to it. This will mean that the entire ** subnet will re-introduce itself. */ int RIOIsolate(p, HostP, UnitId) struct rio_info * p; struct Host * HostP; uint UnitId; { uint link, unit; #ifdef CHECK CheckHostP( HostP ); CheckUnitId( UnitId ); #endif UnitId--; /* this trick relies on the Unit Id being UNSIGNED! */ if ( UnitId > MAX_RUP ) /* dontcha just lurv unsigned maths! */ return(0); if ( HostP->Mapping[UnitId].Flags & BEEN_HERE ) return(0); HostP->Mapping[UnitId].Flags |= BEEN_HERE; if ( p->RIOPrintDisabled == DO_PRINT ) rio_dprint(RIO_DEBUG_ROUTE, ("RIOMesgIsolated %s",HostP->Mapping[UnitId].Name)); for ( link=0; linkMapping[UnitId].Topology[link].Unit; HostP->Mapping[UnitId].Topology[link].Unit = ROUTE_DISCONNECT; HostP->Mapping[UnitId].Topology[link].Link = NO_LINK; RIOIsolate(p, HostP, unit ); } HostP->Mapping[UnitId].Flags &= ~BEEN_HERE; return 1; } int RIOCheck(HostP, UnitId) struct Host *HostP; uint UnitId; { unsigned char link; #ifdef CHECK CheckHostP( HostP ); CheckUnitId( UnitId ); #endif /* rio_dprint(RIO_DEBUG_ROUTE, ("Check to see if unit %d has a route to the host\n",UnitId)); */ rio_dprint(RIO_DEBUG_ROUTE, ("RIOCheck : UnitID = %d\n",UnitId)); if ( UnitId == HOST_ID ) { /* rio_dprint(RIO_DEBUG_ROUTE, ("Unit %d is NOT isolated - it IS the host!\n", UnitId)); */ return 1; } UnitId--; if ( UnitId >= MAX_RUP ) { /* rio_dprint(RIO_DEBUG_ROUTE, ("Unit %d - ignored.\n", UnitId)); */ return 0; } for ( link=0; linkMapping[UnitId].Topology[link].Unit==HOST_ID ) { /* rio_dprint(RIO_DEBUG_ROUTE, ("Unit %d is connected directly to host via link (%c).\n", UnitId, 'A'+link)); */ return 1; } } if ( HostP->Mapping[UnitId].Flags & BEEN_HERE ) { /* rio_dprint(RIO_DEBUG_ROUTE, ("Been to Unit %d before - ignoring\n", UnitId)); */ return 0; } HostP->Mapping[UnitId].Flags |= BEEN_HERE; for ( link=0; link < LINKS_PER_UNIT; link++ ) { /* rio_dprint(RIO_DEBUG_ROUTE, ("Unit %d check link (%c)\n", UnitId,'A'+link)); */ if ( RIOCheck( HostP, HostP->Mapping[UnitId].Topology[link].Unit ) ) { /* rio_dprint(RIO_DEBUG_ROUTE, ("Unit %d is connected to something that knows the host via link (%c)\n", UnitId,link+'A')); */ HostP->Mapping[UnitId].Flags &= ~BEEN_HERE; return 1; } } HostP->Mapping[UnitId].Flags &= ~BEEN_HERE; /* rio_dprint(RIO_DEBUG_ROUTE, ("Unit %d DOESNT KNOW THE HOST!\n", UnitId)); */ return 0; } /* ** Returns the type of unit (host, 16/8 port RTA) */ uint GetUnitType(Uniq) uint Uniq; { switch ( (Uniq >> 28) & 0xf) { case RIO_AT: case RIO_MCA: case RIO_EISA: case RIO_PCI: rio_dprint(RIO_DEBUG_ROUTE, ("Unit type: Host\n")); return(TYPE_HOST); case RIO_RTA_16: rio_dprint(RIO_DEBUG_ROUTE, ("Unit type: 16 port RTA\n")); return(TYPE_RTA16); case RIO_RTA: rio_dprint(RIO_DEBUG_ROUTE, ("Unit type: 8 port RTA\n")); return(TYPE_RTA8); default : rio_dprint(RIO_DEBUG_ROUTE, ("Unit type: Unrecognised\n")); return(99); } } int RIOSetChange(p) struct rio_info * p; { if ( p->RIOQuickCheck != NOT_CHANGED ) return(0); p->RIOQuickCheck = CHANGED; if ( p->RIOSignalProcess ) { rio_dprint(RIO_DEBUG_ROUTE, ("Send SIG-HUP")); /* psignal( RIOSignalProcess, SIGHUP ); */ } return(0); } void RIOConCon(p, HostP, FromId, FromLink, ToId, ToLink, Change) struct rio_info * p; struct Host *HostP; uint FromId; uint FromLink; uint ToId; uint ToLink; int Change; { char *FromName; char *FromType; char *ToName; char *ToType; unsigned int tp; /* ** 15.10.1998 ARG - ESIL 0759 ** (Part) fix for port being trashed when opened whilst RTA "disconnected" ** ** What's this doing in here anyway ? ** It was causing the port to be 'unmapped' if opened whilst RTA "disconnected" ** ** 09.12.1998 ARG - ESIL 0776 - part fix ** Okay, We've found out what this was all about now ! ** Someone had botched this to use RIOHalted to indicated the number of RTAs ** 'disconnected'. The value in RIOHalted was then being used in the ** 'RIO_QUICK_CHECK' ioctl. A none zero value indicating that a least one RTA ** is 'disconnected'. The change was put in to satisfy a customer's needs. ** Having taken this bit of code out 'RIO_QUICK_CHECK' now no longer works for ** the customer. ** if (Change == CONNECT) { if (p->RIOHalted) p->RIOHalted --; } else { p->RIOHalted ++; } ** ** So - we need to implement it slightly differently - a new member of the ** rio_info struct - RIORtaDisCons (RIO RTA connections) keeps track of RTA ** connections and disconnections. */ if (Change == CONNECT) { if (p->RIORtaDisCons) p->RIORtaDisCons--; } else { p->RIORtaDisCons++; } if ( p->RIOPrintDisabled == DONT_PRINT ) return; if ( FromId > ToId ) { tp = FromId; FromId = ToId; ToId = tp; tp = FromLink; FromLink = ToLink; ToLink = tp; } FromName = FromId ? HostP->Mapping[FromId-1].Name : HostP->Name; FromType = FromId ? "RTA" : "HOST"; ToName = ToId ? HostP->Mapping[ToId-1].Name : HostP->Name; ToType = ToId ? "RTA" : "HOST"; rio_dprint(RIO_DEBUG_ROUTE, ("Link between %s '%s' (%c) and %s '%s' (%c) %s.\n", FromType, FromName, 'A'+FromLink, ToType, ToName, 'A'+ToLink, (Change==CONNECT) ? "established" : "disconnected")); cprintf("Link between %s '%s' (%c) and %s '%s' (%c) %s.\n", FromType, FromName, 'A'+FromLink, ToType, ToName, 'A'+ToLink, (Change==CONNECT) ? "established" : "disconnected"); } /* ** RIORemoveFromSavedTable : ** ** Delete and RTA entry from the saved table given to us ** by the configuration program. */ int RIORemoveFromSavedTable(struct rio_info *p, struct Map *pMap) { int entry; /* ** We loop for all entries even after finding an entry and ** zeroing it because we may have two entries to delete if ** its a 16 port RTA. */ for (entry = 0; entry < TOTAL_MAP_ENTRIES; entry++) { if (p->RIOSavedTable[entry].RtaUniqueNum == pMap->RtaUniqueNum) { bzero((caddr_t)&p->RIOSavedTable[entry], sizeof(struct Map)); } } return 0; } /* ** RIOCheckDisconnected : ** ** Scan the unit links to and return zero if the unit is completely ** disconnected. */ int RIOFreeDisconnected(struct rio_info *p, struct Host *HostP, int unit) { int link; rio_dprint(RIO_DEBUG_ROUTE, ("RIOFreeDisconnect unit %d\n",unit)); /* ** If the slot is tentative and does not belong to the ** second half of a 16 port RTA then scan to see if ** is disconnected. */ for (link = 0; link < LINKS_PER_UNIT; link++) { if (HostP->Mapping[unit].Topology[link].Unit != ROUTE_DISCONNECT) break; } /* ** If not all links are disconnected then we can forget about it. */ if (link < LINKS_PER_UNIT) return 1; #if NEED_TO_FIX_THIS /* Ok so all the links are disconnected. But we may have only just ** made this slot tentative and not yet received a topology update. ** Lets check how long ago we made it tentative. */ rio_dprint(RIO_DEBUG_ROUTE, ("Just about to check LBOLT on entry %d\n",unit)); if (drv_getparm(LBOLT, (ulong_t *) ¤t_time)) rio_dprint(RIO_DEBUG_ROUTE, ("drv_getparm(LBOLT,....) Failed.\n")); elapse_time = current_time - TentTime[unit]; rio_dprint(RIO_DEBUG_ROUTE, ("elapse %d = current %d - tent %d (%d usec)\n", elapse_time, current_time, TentTime[unit],drv_hztousec(elapse_time))); if (drv_hztousec(elapse_time) < WAIT_TO_FINISH) { rio_dprint(RIO_DEBUG_ROUTE, ("Skipping slot %d, not timed out yet %d\n" ,unit,drv_hztousec(elapse_time))); return 1; } #endif /* ** We have found an usable slot. ** If it is half of a 16 port RTA then delete the other half. */ if (HostP->Mapping[unit].ID2 != 0) { int nOther = (HostP->Mapping[unit].ID2) -1; rio_dprint(RIO_DEBUG_ROUTE, ("RioFreedis second slot %d.\n",nOther)); bzero((caddr_t)&HostP->Mapping[nOther], sizeof(struct Map)); } RIORemoveFromSavedTable(p, &HostP->Mapping[unit]); return 0; } /* ** RIOFindFreeID : ** ** This function scans the given host table for either one ** or two free unit ID's. */ int RIOFindFreeID(struct rio_info *p, struct Host *HostP, uint *pID1, uint *pID2) { int unit,tempID; /* ** Initialise the ID's to MAX_RUP. ** We do this to make the loop for setting the ID's as simple as ** possible. */ *pID1 = MAX_RUP; if (pID2 != NULL) *pID2 = MAX_RUP; /* ** Scan all entries of the host mapping table for free slots. ** We scan for free slots first and then if that is not successful ** we start all over again looking for tentative slots we can re-use. */ for (unit = 0; unit < MAX_RUP; unit++) { rio_dprint(RIO_DEBUG_ROUTE, ("Scanning unit %d\n",unit)); /* ** If the flags are zero then the slot is empty. */ if (HostP->Mapping[unit].Flags == 0) { rio_dprint(RIO_DEBUG_ROUTE, (" This slot is empty.\n")); /* ** If we haven't allocated the first ID then do it now. */ if (*pID1 == MAX_RUP) { rio_dprint(RIO_DEBUG_ROUTE, ("Make tentative entry for first unit %d\n", unit)); *pID1 = unit; /* ** If the second ID is not needed then we can return ** now. */ if (pID2 == NULL) return 0; } else { /* ** Allocate the second slot and return. */ rio_dprint(RIO_DEBUG_ROUTE, ("Make tentative entry for second unit %d\n", unit)); *pID2 = unit; return 0; } } } /* ** If we manage to come out of the free slot loop then we ** need to start all over again looking for tentative slots ** that we can re-use. */ rio_dprint(RIO_DEBUG_ROUTE, ("Starting to scan for tentative slots\n")); for (unit = 0; unit < MAX_RUP; unit++) { if (((HostP->Mapping[unit].Flags & SLOT_TENTATIVE) || (HostP->Mapping[unit].Flags == 0)) && ! (HostP->Mapping[unit].Flags & RTA16_SECOND_SLOT )) { rio_dprint(RIO_DEBUG_ROUTE, (" Slot %d looks promising.\n",unit)); if(unit == *pID1) { rio_dprint(RIO_DEBUG_ROUTE, (" No it isn't, its the 1st half\n")); continue; } /* ** Slot is Tentative or Empty, but not a tentative second ** slot of a 16 porter. ** Attempt to free up this slot (and its parnter if ** it is a 16 port slot. The second slot will become ** empty after a call to RIOFreeDisconnected so thats why ** we look for empty slots above as well). */ if (HostP->Mapping[unit].Flags != 0) if (RIOFreeDisconnected(p, HostP, unit) != 0) continue; /* ** If we haven't allocated the first ID then do it now. */ if (*pID1 == MAX_RUP) { rio_dprint(RIO_DEBUG_ROUTE, ("Grab tentative entry for first unit %d\n", unit)); *pID1 = unit; /* ** Clear out this slot now that we intend to use it. */ bzero(&HostP->Mapping[unit], sizeof(struct Map)); /* ** If the second ID is not needed then we can return ** now. */ if (pID2 == NULL) return 0; } else { /* ** Allocate the second slot and return. */ rio_dprint(RIO_DEBUG_ROUTE, ("Grab tentative/empty entry for second unit %d\n", unit)); *pID2 = unit; /* ** Clear out this slot now that we intend to use it. */ bzero(&HostP->Mapping[unit], sizeof(struct Map)); /* At this point under the right(wrong?) conditions ** we may have a first unit ID being higher than the ** second unit ID. This is a bad idea if we are about ** to fill the slots with a 16 port RTA. ** Better check and swap them over. */ if (*pID1 > *pID2) { rio_dprint(RIO_DEBUG_ROUTE, ("Swapping IDS %d %d\n",*pID1,*pID2)); tempID = *pID1; *pID1 = *pID2; *pID2 = tempID; } return 0; } } } /* ** If we manage to get to the end of the second loop then we ** can give up and return a failure. */ return 1; } /* ** The link switch scenario. ** ** Rta Wun (A) is connected to Tuw (A). ** The tables are all up to date, and the system is OK. ** ** If Wun (A) is now moved to Wun (B) before Wun (A) can ** become disconnected, then the follow happens: ** ** Tuw (A) spots the change of unit:link at the other end ** of its link and Tuw sends a topology packet reflecting ** the change: Tuw (A) now disconnected from Wun (A), and ** this is closely followed by a packet indicating that ** Tuw (A) is now connected to Wun (B). ** ** Wun (B) will spot that it has now become connected, and ** Wun will send a topology packet, which indicates that ** both Wun (A) and Wun (B) is connected to Tuw (A). ** ** Eventually Wun (A) realises that it is now disconnected ** and Wun will send out a topology packet indicating that ** Wun (A) is now disconnected. */