#
# ISDN device configuration
#
if [ "$CONFIG_INET" != "n" ]; then
   bool '  Support synchronous PPP' CONFIG_ISDN_PPP
   if [ "$CONFIG_ISDN_PPP" != "n" ]; then
      bool '    Use VJ-compression with synchronous PPP' CONFIG_ISDN_PPP_VJ
      bool '    Support generic MP (RFC 1717)' CONFIG_ISDN_MPP
   fi
fi
bool '  Support audio via ISDN' CONFIG_ISDN_AUDIO
if [ "$CONFIG_ISDN_AUDIO" != "n" ]; then
   bool '    Support AT-Fax Class 2 commands' CONFIG_ISDN_TTY_FAX
fi
bool '  Support isdn diversion services' CONFIG_ISDN_DIVERSION
if [ "$CONFIG_X25" != "n" -a "$CONFIG_EXPERIMENTAL" = "y" ]; then
   bool '    X.25 PLP on top of ISDN (EXPERIMENTAL)' CONFIG_ISDN_X25
fi
dep_tristate '  ICN 2B and 4B support' CONFIG_ISDN_DRV_ICN $CONFIG_ISDN
dep_tristate '  isdnloop support' CONFIG_ISDN_DRV_LOOP $CONFIG_ISDN
dep_tristate '  PCBIT-D support' CONFIG_ISDN_DRV_PCBIT $CONFIG_ISDN
dep_tristate '  HiSax SiemensChipSet driver support' CONFIG_ISDN_DRV_HISAX $CONFIG_ISDN
if [ "$CONFIG_ISDN_DRV_HISAX" != "n" ]; then
   bool '    HiSax Support for EURO/DSS1' CONFIG_HISAX_EURO
   if [ "$CONFIG_HISAX_EURO" != "n" ]; then
      bool '      Support for german chargeinfo' CONFIG_DE_AOC
      bool '      Disable sending complete' CONFIG_HISAX_NO_SENDCOMPLETE
      bool '      Disable sending low layer compatibility' CONFIG_HISAX_NO_LLC
   fi
   bool '    HiSax Support for german 1TR6' CONFIG_HISAX_1TR6
   bool '    HiSax Support for Teles 16.0/8.0' CONFIG_HISAX_16_0
   bool '    HiSax Support for Teles 16.3 or PNP or PCMCIA' CONFIG_HISAX_16_3
   bool '    HiSax Support for Teles PCI' CONFIG_HISAX_TELESPCI 
   bool '    HiSax Support for Teles S0Box' CONFIG_HISAX_S0BOX 
   bool '    HiSax Support for AVM A1 (Fritz)' CONFIG_HISAX_AVM_A1
   bool '    HiSax Support for AVM PnP/PCI (Fritz!PnP/PCI)' CONFIG_HISAX_FRITZPCI
   bool '    HiSax Support for AVM A1 PCMCIA (Fritz)' CONFIG_HISAX_AVM_A1_PCMCIA
   bool '    HiSax Support for Elsa cards' CONFIG_HISAX_ELSA
   bool '    HiSax Support for ITK ix1-micro Revision 2' CONFIG_HISAX_IX1MICROR2
   bool '    HiSax Support for Eicon.Diehl Diva cards' CONFIG_HISAX_DIEHLDIVA
   bool '    HiSax Support for ASUSCOM cards' CONFIG_HISAX_ASUSCOM
   bool '    HiSax Support for TELEINT cards' CONFIG_HISAX_TELEINT
   bool '    HiSax Support for HFC-S based cards' CONFIG_HISAX_HFCS
   bool '    HiSax Support for Sedlbauer cards' CONFIG_HISAX_SEDLBAUER
   bool '    HiSax Support for USR Sportster internal TA' CONFIG_HISAX_SPORTSTER
   bool '    HiSax Support for MIC card' CONFIG_HISAX_MIC
   bool '    HiSax Support for NETjet card' CONFIG_HISAX_NETJET
   bool '    HiSax Support for Niccy PnP/PCI card' CONFIG_HISAX_NICCY
   bool '    HiSax Support for Siemens I-Surf card' CONFIG_HISAX_ISURF
   bool '    HiSax Support for HST Saphir card' CONFIG_HISAX_HSTSAPHIR
   bool '    HiSax Support for Telekom A4T card' CONFIG_HISAX_BKM_A4T
   bool '    HiSax Support for Scitel Quadro card' CONFIG_HISAX_SCT_QUADRO
   bool '    HiSax Support for Gazel cards' CONFIG_HISAX_GAZEL
   bool '    HiSax Support for HFC PCI-Bus cards' CONFIG_HISAX_HFC_PCI
   if [ "$CONFIG_EXPERIMENTAL" != "n" ]; then
#      bool '    HiSax Support for TESTEMULATOR (EXPERIMENTAL)' CONFIG_HISAX_TESTEMU
      if [ "$ARCH" = "sparc" -o "$ARCH" = "sparc64" ]; then
	 bool '    HiSax Support for Am7930' CONFIG_HISAX_AMD7930
      fi
   fi
fi
if [ "$CONFIG_EXPERIMENTAL" != "n" ]; then
	dep_tristate '  Spellcaster support (EXPERIMENTAL)' CONFIG_ISDN_DRV_SC $CONFIG_ISDN
	dep_tristate '  IBM Active 2000 support (EXPERIMENTAL)' CONFIG_ISDN_DRV_ACT2000 $CONFIG_ISDN
fi
dep_tristate '  Eicon.Diehl active card support' CONFIG_ISDN_DRV_EICON $CONFIG_ISDN
if [ "$CONFIG_ISDN_DRV_EICON" != "n" ]; then
    bool '    Eicon S, SX, SCOM, Quadro, S2M support' CONFIG_ISDN_DRV_EICON_ISA
fi
dep_tristate '  AVM CAPI2.0 support' CONFIG_ISDN_DRV_AVMB1 $CONFIG_ISDN
if [ "$CONFIG_ISDN_DRV_AVMB1" != "n" ]; then
   bool '    AVM B1 ISA support' CONFIG_ISDN_DRV_AVMB1_B1ISA
   bool '    AVM B1 PCI support' CONFIG_ISDN_DRV_AVMB1_B1PCI
   bool '    AVM T1/T1B ISA support' CONFIG_ISDN_DRV_AVMB1_T1ISA
   bool '    AVM B1/M1/M2 PCMCIA support' CONFIG_ISDN_DRV_AVMB1_B1PCMCIA
   bool '    Verbose reason code reporting (kernel size +=7K)' CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON
fi