#
# ISDN device configuration
#
if [ "$CONFIG_INET" != "n" ]; then
  bool 'Support synchronous PPP' CONFIG_ISDN_PPP
  if [ "$CONFIG_ISDN_PPP" != "n" ]; then
    bool 'Use VJ-compression with synchronous PPP' CONFIG_ISDN_PPP_VJ
    bool 'Support generic MP (RFC 1717)' CONFIG_ISDN_MPP
  fi
fi
bool 'Support audio via ISDN' CONFIG_ISDN_AUDIO
if [ "$CONFIG_ISDN_AUDIO" != "n" ]; then
  bool 'Support AT-Fax Class 2 commands' CONFIG_ISDN_TTY_FAX
fi
bool 'Support isdn diversion services' CONFIG_ISDN_DIVERSION
if [ "$CONFIG_X25" != "n" ]; then
  bool 'X.25 PLP on top of ISDN (EXPERIMENTAL)' CONFIG_ISDN_X25
fi
dep_tristate 'ICN 2B and 4B support' CONFIG_ISDN_DRV_ICN $CONFIG_ISDN
dep_tristate 'isdnloop support' CONFIG_ISDN_DRV_LOOP $CONFIG_ISDN
dep_tristate 'PCBIT-D support' CONFIG_ISDN_DRV_PCBIT $CONFIG_ISDN
dep_tristate 'HiSax SiemensChipSet driver support' CONFIG_ISDN_DRV_HISAX $CONFIG_ISDN
if [ "$CONFIG_ISDN_DRV_HISAX" != "n" ]; then
    bool 'HiSax Support for EURO/DSS1' CONFIG_HISAX_EURO
    if [ "$CONFIG_HISAX_EURO" != "n" ]; then
	    bool 'Support for german chargeinfo' CONFIG_DE_AOC
	    bool 'Disable sending complete' CONFIG_HISAX_NO_SENDCOMPLETE
	    bool 'Disable sending low layer compatibility' CONFIG_HISAX_NO_LLC
    fi
    bool 'HiSax Support for german 1TR6' CONFIG_HISAX_1TR6
    bool 'HiSax Support for Teles 16.0/8.0' CONFIG_HISAX_16_0
    bool 'HiSax Support for Teles 16.3 or PNP or PCMCIA' CONFIG_HISAX_16_3
    bool 'HiSax Support for Teles PCI' CONFIG_HISAX_TELESPCI 
    bool 'HiSax Support for Teles S0Box' CONFIG_HISAX_S0BOX 
    bool 'HiSax Support for AVM A1 (Fritz)' CONFIG_HISAX_AVM_A1
    bool 'HiSax Support for AVM PnP/PCI (Fritz!PnP/PCI)' CONFIG_HISAX_FRITZPCI
    bool 'HiSax Support for AVM A1 PCMCIA (Fritz)' CONFIG_HISAX_AVM_A1_PCMCIA
    bool 'HiSax Support for Elsa cards' CONFIG_HISAX_ELSA
    bool 'HiSax Support for ITK ix1-micro Revision 2' CONFIG_HISAX_IX1MICROR2
    bool 'HiSax Support for Eicon.Diehl Diva cards' CONFIG_HISAX_DIEHLDIVA
    bool 'HiSax Support for ASUSCOM cards' CONFIG_HISAX_ASUSCOM
    bool 'HiSax Support for TELEINT cards' CONFIG_HISAX_TELEINT
    bool 'HiSax Support for HFC-S based cards' CONFIG_HISAX_HFCS
    bool 'HiSax Support for Sedlbauer cards' CONFIG_HISAX_SEDLBAUER
    bool 'HiSax Support for USR Sportster internal TA' CONFIG_HISAX_SPORTSTER
    bool 'HiSax Support for MIC card' CONFIG_HISAX_MIC
    bool 'HiSax Support for NETjet card' CONFIG_HISAX_NETJET
    bool 'HiSax Support for Niccy PnP/PCI card' CONFIG_HISAX_NICCY
    bool 'HiSax Support for Siemens I-Surf card' CONFIG_HISAX_ISURF
    bool 'HiSax Support for HST Saphir card' CONFIG_HISAX_HSTSAPHIR
    bool 'HiSax Support for Telekom A4T card' CONFIG_HISAX_BKM_A4T
    bool 'HiSax Support for Scitel Quadro card' CONFIG_HISAX_SCT_QUADRO
    bool 'HiSax Support for Gazel cards' CONFIG_HISAX_GAZEL
    bool 'HiSax Support for HFC PCI-Bus cards' CONFIG_HISAX_HFC_PCI
    if [ "$CONFIG_EXPERIMENTAL" != "n" ]; then
#	bool 'HiSax Support for TESTEMULATOR (EXPERIMENTAL)' CONFIG_HISAX_TESTEMU
	if [ "$ARCH" = "sparc" -o "$ARCH" = "sparc64" ]; then
		bool 'HiSax Support for Am7930' CONFIG_HISAX_AMD7930
	fi
    fi
fi
if [ "$CONFIG_EXPERIMENTAL" != "n" ]; then
	dep_tristate 'Spellcaster support (EXPERIMENTAL)' CONFIG_ISDN_DRV_SC $CONFIG_ISDN
	dep_tristate 'IBM Active 2000 support (EXPERIMENTAL)' CONFIG_ISDN_DRV_ACT2000 $CONFIG_ISDN
fi
dep_tristate 'Eicon.Diehl active card support' CONFIG_ISDN_DRV_EICON $CONFIG_ISDN
if [ "$CONFIG_ISDN_DRV_EICON" != "n" ]; then
    bool 'Eicon S,SX,SCOM,Quadro,S2M support' CONFIG_ISDN_DRV_EICON_ISA
fi
dep_tristate 'AVM CAPI2.0 support' CONFIG_ISDN_DRV_AVMB1 $CONFIG_ISDN
if [ "$CONFIG_ISDN_DRV_AVMB1" != "n" ]; then
    bool 'AVM B1 ISA support' CONFIG_ISDN_DRV_AVMB1_B1ISA
    bool 'AVM B1 PCI support' CONFIG_ISDN_DRV_AVMB1_B1PCI
    bool 'AVM T1/T1B ISA support' CONFIG_ISDN_DRV_AVMB1_T1ISA
    bool 'AVM B1/M1/M2 PCMCIA support' CONFIG_ISDN_DRV_AVMB1_B1PCMCIA
    bool 'Verbose reason code reporting (kernel size +=7K)' CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON
fi