# # ISDN device configuration # # only included if CONFIG_ISDN != n if [ "$CONFIG_INET" != "n" ]; then bool ' Support synchronous PPP' CONFIG_ISDN_PPP if [ "$CONFIG_ISDN_PPP" != "n" ]; then bool ' Use VJ-compression with synchronous PPP' CONFIG_ISDN_PPP_VJ bool ' Support generic MP (RFC 1717)' CONFIG_ISDN_MPP dep_tristate ' Support BSD compression (module only)' CONFIG_ISDN_PPP_BSDCOMP m fi fi bool ' Support audio via ISDN' CONFIG_ISDN_AUDIO if [ "$CONFIG_ISDN_AUDIO" != "n" ]; then bool ' Support AT-Fax Class 1 and 2 commands' CONFIG_ISDN_TTY_FAX fi if [ "$CONFIG_X25" != "n" ]; then bool ' X.25 PLP on top of ISDN' CONFIG_ISDN_X25 fi mainmenu_option next_comment comment 'ISDN feature submodules' dep_tristate 'isdnloop support' CONFIG_ISDN_DRV_LOOP $CONFIG_ISDN dep_tristate 'Support isdn diversion services' CONFIG_ISDN_DIVERSION $CONFIG_ISDN m endmenu comment 'low-level hardware drivers' mainmenu_option next_comment comment 'Passive ISDN cards' dep_tristate 'HiSax SiemensChipSet driver support' CONFIG_ISDN_DRV_HISAX $CONFIG_ISDN if [ "$CONFIG_ISDN_DRV_HISAX" != "n" ]; then comment ' D-channel protocol features' bool ' HiSax Support for EURO/DSS1' CONFIG_HISAX_EURO if [ "$CONFIG_HISAX_EURO" != "n" ]; then bool ' Support for german chargeinfo' CONFIG_DE_AOC bool ' Disable sending complete' CONFIG_HISAX_NO_SENDCOMPLETE bool ' Disable sending low layer compatibility' CONFIG_HISAX_NO_LLC bool ' Disable keypad protocol option' CONFIG_HISAX_NO_KEYPAD fi bool ' HiSax Support for german 1TR6' CONFIG_HISAX_1TR6 bool ' HiSax Support for US NI1' CONFIG_HISAX_NI1 comment ' HiSax supported cards' bool ' Teles 16.0/8.0' CONFIG_HISAX_16_0 bool ' Teles 16.3 or PNP or PCMCIA' CONFIG_HISAX_16_3 bool ' Teles PCI' CONFIG_HISAX_TELESPCI bool ' Teles S0Box' CONFIG_HISAX_S0BOX bool ' AVM A1 (Fritz)' CONFIG_HISAX_AVM_A1 bool ' AVM PnP/PCI (Fritz!PnP/PCI)' CONFIG_HISAX_FRITZPCI bool ' AVM A1 PCMCIA (Fritz)' CONFIG_HISAX_AVM_A1_PCMCIA bool ' Elsa cards' CONFIG_HISAX_ELSA bool ' ITK ix1-micro Revision 2' CONFIG_HISAX_IX1MICROR2 bool ' Eicon.Diehl Diva cards' CONFIG_HISAX_DIEHLDIVA bool ' ASUSCOM ISA cards' CONFIG_HISAX_ASUSCOM bool ' TELEINT cards' CONFIG_HISAX_TELEINT bool ' HFC-S based cards' CONFIG_HISAX_HFCS bool ' Sedlbauer cards' CONFIG_HISAX_SEDLBAUER bool ' USR Sportster internal TA' CONFIG_HISAX_SPORTSTER bool ' MIC card' CONFIG_HISAX_MIC bool ' NETjet card' CONFIG_HISAX_NETJET bool ' NETspider U card' CONFIG_HISAX_NETJET_U bool ' Niccy PnP/PCI card' CONFIG_HISAX_NICCY bool ' Siemens I-Surf card' CONFIG_HISAX_ISURF bool ' HST Saphir card' CONFIG_HISAX_HSTSAPHIR bool ' Telekom A4T card' CONFIG_HISAX_BKM_A4T bool ' Scitel Quadro card' CONFIG_HISAX_SCT_QUADRO bool ' Gazel cards' CONFIG_HISAX_GAZEL bool ' HFC PCI-Bus cards' CONFIG_HISAX_HFC_PCI bool ' Winbond W6692 based cards' CONFIG_HISAX_W6692 if [ "$CONFIG_EXPERIMENTAL" != "n" ]; then bool ' HFC-S+, HFC-SP, HFC-PCMCIA cards' CONFIG_HISAX_HFC_SX # bool ' TESTEMULATOR (EXPERIMENTAL)' CONFIG_HISAX_TESTEMU if [ "$ARCH" = "sparc" -o "$ARCH" = "sparc64" ]; then bool ' Am7930' CONFIG_HISAX_AMD7930 fi fi fi endmenu ### Active ISDN cards mainmenu_option next_comment comment 'Active ISDN cards' dep_tristate 'ICN 2B and 4B support' CONFIG_ISDN_DRV_ICN $CONFIG_ISDN dep_tristate 'PCBIT-D support' CONFIG_ISDN_DRV_PCBIT $CONFIG_ISDN dep_tristate 'Spellcaster support' CONFIG_ISDN_DRV_SC $CONFIG_ISDN dep_tristate 'IBM Active 2000 support' CONFIG_ISDN_DRV_ACT2000 $CONFIG_ISDN bool 'Eicon active card support' CONFIG_ISDN_DRV_EICON if [ "$CONFIG_ISDN_DRV_EICON" != "n" ]; then if [ "$CONFIG_ISDN_DRV_EICON_OLD" != "y" ]; then dep_tristate ' Build Eicon driver type standalone' CONFIG_ISDN_DRV_EICON_DIVAS $CONFIG_ISDN fi if [ "$CONFIG_ISDN_DRV_EICON_DIVAS" != "y" ]; then dep_tristate ' Legacy Eicon driver' CONFIG_ISDN_DRV_EICON_OLD $CONFIG_ISDN if [ "$CONFIG_ISDN_DRV_EICON_OLD" != "n" ]; then dep_bool ' Eicon PCI DIVA Server BRI/PRI/4BRI support' CONFIG_ISDN_DRV_EICON_PCI $CONFIG_PCI bool ' Eicon S,SX,SCOM,Quadro,S2M support' CONFIG_ISDN_DRV_EICON_ISA fi fi fi # CAPI subsystem tristate 'CAPI2.0 support' CONFIG_ISDN_CAPI if [ "$CONFIG_ISDN_CAPI" != "n" ]; then bool ' Verbose reason code reporting (kernel size +=7K)' CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON dep_bool ' CAPI2.0 Middleware support (EXPERIMENTAL)' CONFIG_ISDN_CAPI_MIDDLEWARE $CONFIG_EXPERIMENTAL dep_tristate ' CAPI2.0 /dev/capi support' CONFIG_ISDN_CAPI_CAPI20 $CONFIG_ISDN_CAPI if [ "$CONFIG_ISDN_CAPI_MIDDLEWARE" = "y" ]; then dep_mbool ' CAPI2.0 filesystem support' CONFIG_ISDN_CAPI_CAPIFS_BOOL $CONFIG_ISDN_CAPI_CAPI20 if [ "$CONFIG_ISDN_CAPI_CAPIFS_BOOL" = "y" ]; then define_tristate CONFIG_ISDN_CAPI_CAPIFS $CONFIG_ISDN_CAPI_CAPI20 else define_tristate CONFIG_ISDN_CAPI_CAPIFS n fi fi dep_tristate ' CAPI2.0 capidrv interface support' CONFIG_ISDN_CAPI_CAPIDRV $CONFIG_ISDN_CAPI $CONFIG_ISDN fi # CAPI drivers if [ "$CONFIG_ISDN_CAPI" != "n" ]; then dep_tristate ' AVM B1 ISA support' CONFIG_ISDN_DRV_AVMB1_B1ISA $CONFIG_ISDN_CAPI dep_tristate ' AVM B1 PCI support' CONFIG_ISDN_DRV_AVMB1_B1PCI $CONFIG_ISDN_CAPI $CONFIG_PCI dep_mbool ' AVM B1 PCI V4 support' CONFIG_ISDN_DRV_AVMB1_B1PCIV4 $CONFIG_ISDN_DRV_AVMB1_B1PCI dep_tristate ' AVM T1/T1-B ISA support' CONFIG_ISDN_DRV_AVMB1_T1ISA $CONFIG_ISDN_CAPI dep_tristate ' AVM B1/M1/M2 PCMCIA support' CONFIG_ISDN_DRV_AVMB1_B1PCMCIA $CONFIG_ISDN_CAPI $CONFIG_PCMCIA dep_tristate ' AVM B1/M1/M2 PCMCIA cs module' CONFIG_ISDN_DRV_AVMB1_AVM_CS $CONFIG_ISDN_DRV_AVMB1_B1PCMCIA dep_tristate ' AVM T1/T1-B PCI support' CONFIG_ISDN_DRV_AVMB1_T1PCI $CONFIG_ISDN_CAPI $CONFIG_PCI dep_tristate ' AVM C4 support' CONFIG_ISDN_DRV_AVMB1_C4 $CONFIG_ISDN_CAPI $CONFIG_PCI fi # HYSDN dep_tristate ' Hypercope HYSDN cards (Champ, Ergo, Metro) support (module only)' CONFIG_HYSDN m $CONFIG_PROC_FS dep_mbool ' HYSDN CAPI 2.0 support' CONFIG_HYSDN_CAPI $CONFIG_HYSDN $CONFIG_ISDN_CAPI endmenu