/* * drivers/char/mac_keyb.c * * Keyboard driver for Power Macintosh computers. * * Adapted from drivers/char/keyboard.c by Paul Mackerras * (see that file for its authors and contributors). * * Copyright (C) 1996 Paul Mackerras. */ #include #include #include #include #include #include #include #include #include #include #include #include #define KEYB_KEYREG 0 /* register # for key up/down data */ #define KEYB_LEDREG 2 /* register # for leds on ADB keyboard */ #define MOUSE_DATAREG 0 /* reg# for movement/button codes from mouse */ static void kbd_repeat(unsigned long); static struct timer_list repeat_timer = { NULL, NULL, 0, 0, kbd_repeat }; static int last_keycode; static void keyboard_input(unsigned char *, int, struct pt_regs *, int); static void input_keycode(int, int); static void leds_done(struct adb_request *); /* XXX: Hook for mouse driver */ void (*adb_mouse_interrupt_hook) (char *, int); int adb_emulate_button2; int adb_emulate_button3; extern int console_loglevel; extern struct kbd_struct kbd_table[]; extern void handle_scancode(unsigned char); extern void put_queue(int); /* this map indicates which keys shouldn't autorepeat. */ static unsigned char dont_repeat[128] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, /* esc...option */ 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, /* num lock */ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, /* scroll lock */ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, }; int mackbd_setkeycode(unsigned int scancode, unsigned int keycode) { return -EINVAL; } int mackbd_getkeycode(unsigned int scancode) { return -EINVAL; } int mackbd_pretranslate(unsigned char scancode, char raw_mode) { return 1; } int mackbd_translate(unsigned char keycode, unsigned char *keycodep, char raw_mode) { if (!raw_mode) { /* * Convert R-shift/control/option to L version. */ switch (keycode) { case 0x7b: keycode = 0x38; break; /* R-shift */ case 0x7c: keycode = 0x3a; break; /* R-option */ case 0x7d: keycode = 0x36; break; /* R-control */ } } *keycodep = keycode; return 1; } int mackbd_unexpected_up(unsigned char keycode) { return 0x80; } static void keyboard_input(unsigned char *data, int nb, struct pt_regs *regs, int apoll) { /* first check this is from register 0 */ if (nb != 3 || (data[0] & 3) != KEYB_KEYREG) return; /* ignore it */ kbd_pt_regs = regs; input_keycode(data[1], 0); if (!(data[2] == 0xff || (data[2] == 0x7f && data[1] == 0x7f))) input_keycode(data[2], 0); } static void input_keycode(int keycode, int repeat) { struct kbd_struct *kbd; int up_flag; kbd = kbd_table + fg_console; up_flag = (keycode & 0x80); keycode &= 0x7f; if (!repeat) del_timer(&repeat_timer); /* * XXX: Add mouse button 2+3 fake codes here if mouse open. * Keep track of 'button' states here as we only send * single up/down events! * Really messy; might need to check if keyboard is in * VC_RAW mode. * Might also want to know how many buttons need to be emulated. * -> hide this as function in arch/m68k/mac ? */ if (adb_mouse_interrupt_hook || console_loglevel == 10) { unsigned char button, button2, button3, fake_event; static unsigned char button2state=0, button3state=0; /* up */ /* faked ADB packet */ static char data[4] = { 0, 0x80, 0x80, 0x80 }; button = 0; fake_event = 0; switch (keycode) { /* which 'button' ? */ case 0x7c: /* R-option */ button2 = (!up_flag); /* new state */ if (button2 != button2state) /* change ? */ button = 2; button2state = button2; /* save state */ fake_event = 2; break; case 0x7d: /* R-control */ button3 = (!up_flag); /* new state */ if (button3 != button3state) /* change ? */ button = 3; button3state = button3; /* save state */ fake_event = 3; break; } if (fake_event && console_loglevel >= 8) printk("fake event: button2 %d button3 %d button %d\n", button2state, button3state, button); if (button) { /* there's been a button state change */ /* fake a mouse packet : send all bytes, change one! */ data[button] = (up_flag ? 0x80 : 0); if (adb_mouse_interrupt_hook) adb_mouse_interrupt_hook(data, -1); else printk("mouse_fake: data %x %x %x buttons %x \n", data[1], data[2], data[3], ~( (data[1] & 0x80 ? 0 : 4) | (data[2] & 0x80 ? 0 : 1) | (data[3] & 0x80 ? 0 : 2) )&7 ); } /* * XXX: testing mouse emulation ... don't process fake keys! */ if (fake_event) return; } if (kbd->kbdmode != VC_RAW) { if (!up_flag && !dont_repeat[keycode]) { last_keycode = keycode; repeat_timer.expires = jiffies + (repeat? HZ/15: HZ/2); add_timer(&repeat_timer); } /* * adb kludge!! Imitate pc caps lock behaviour by * generating an up/down event for each time caps * is pressed/released. Also, makes sure that the * LED are handled. atong@uiuc.edu */ switch (keycode) { /*case 0xb9:*/ case 0x39: handle_scancode(0x39); handle_scancode(0xb9); mark_bh(KEYBOARD_BH); return; case 0x47: /*case 0xc7:*/ mark_bh(KEYBOARD_BH); break; } } handle_scancode(keycode + up_flag); } static void kbd_repeat(unsigned long xxx) { unsigned long flags; save_flags(flags); cli(); input_keycode(last_keycode, 1); restore_flags(flags); } static void mouse_input(unsigned char *data, int nb, struct pt_regs *regs, int autopoll) { /* [ACA:23-Mar-97] Three button mouse support. This is designed to function with MkLinux DR-2.1 style X servers. It only works with three-button mice that conform to Apple's multi-button mouse protocol. */ /* The X server for MkLinux DR2.1 uses the following unused keycodes to read the mouse: 0x7e This indicates that the next two keycodes should be interpreted as mouse information. The first following byte's high bit represents the state of the left button. The lower seven bits represent the x-axis acceleration. The lower seven bits of the second byte represent y-axis acceleration. 0x3f The x server interprets this keycode as a middle button release. 0xbf The x server interprets this keycode as a middle button depress. 0x40 The x server interprets this keycode as a right button release. 0xc0 The x server interprets this keycode as a right button depress. NOTES: There should be a better way of handling mice in the X server. The MOUSE_ESCAPE code (0x7e) should be followed by three bytes instead of two. The three mouse buttons should then, in the X server, be read as the high-bits of all three bytes. The x and y motions can still be in the first two bytes. Maybe I'll do this... */ /* Handler 4 -- Apple Extended mouse protocol. For Apple's 3-button mouse protocol the data array will contain the following values: BITS COMMENTS data[0] = 0000 0000 ADB packet identifer. data[1] = 0100 0000 Extended protocol register. Bits 6-7 are the device id, which should be 1. Bits 4-5 are resolution which is in "units/inch". The Logitech MouseMan returns these bits clear but it has 200/300cpi resolution. Bits 0-3 are unique vendor id. data[2] = 0011 1100 Bits 0-1 should be zero for a mouse device. Bits 2-3 should be 8 + 4. Bits 4-7 should be 3 for a mouse device. data[3] = bxxx xxxx Left button and x-axis motion. data[4] = byyy yyyy Second button and y-axis motion. data[5] = byyy bxxx Third button and fourth button. Y is additional high bits of y-axis motion. XY is additional high bits of x-axis motion. NOTE: data[0] and data[2] are confirmed by the parent function and need not be checked here. */ /* Handler 1 -- 100cpi original Apple mouse protocol. Handler 2 -- 200cpi original Apple mouse protocol. For Apple's standard one-button mouse protocol the data array will contain the following values: BITS COMMENTS data[0] = 0000 0000 ADB packet identifer. data[1] = ???? ???? (?) data[2] = ???? ??00 Bits 0-1 should be zero for a mouse device. data[3] = bxxx xxxx First button and x-axis motion. data[4] = byyy yyyy Second button and y-axis motion. NOTE: data[0] is confirmed by the parent function and need not be checked here. */ struct kbd_struct *kbd; if (adb_mouse_interrupt_hook) adb_mouse_interrupt_hook(data, nb); else if (console_loglevel == 10) printk("mouse_input: data %x %x %x buttons %x dx %d dy %d \n", data[1], data[2], data[3], ~((data[1] & 0x80 ? 0 : 4) | (data[2] & 0x80 ? 0 : 1) | (data[3] & 0x80 ? 0 : 2))&7, ((data[2]&0x7f) < 64 ? (data[2]&0x7f) : (data[2]&0x7f)-128 ), ((data[1]&0x7f) < 64 ? -(data[1]&0x7f) : 128-(data[1]&0x7f) ) ); kbd = kbd_table + fg_console; /* Only send mouse codes when keyboard is in raw mode. */ if (kbd->kbdmode == VC_RAW) { static unsigned char uch_ButtonStateSecond = 0; unsigned char uchButtonSecond; /* Send first button, second button and movement. */ put_queue( 0x7e ); put_queue( data[1] ); put_queue( data[2] ); /* [ACA: Are there any two-button ADB mice that use handler 1 or 2?] */ /* Store the button state. */ uchButtonSecond = (data[2] & 0x80); /* Send second button. */ if (uchButtonSecond != uch_ButtonStateSecond) { put_queue( 0x3f | uchButtonSecond ); uch_ButtonStateSecond = uchButtonSecond; } /* Macintosh 3-button mouse (handler 4). */ if ((nb == 6) && autopoll /*?*/) { static unsigned char uch_ButtonStateThird = 0; unsigned char uchButtonThird; /* Store the button state for speed. */ uchButtonThird = (data[3] & 0x80); /* Send third button. */ if (uchButtonThird != uch_ButtonStateThird) { put_queue( 0x40 | uchButtonThird ); uch_ButtonStateThird = uchButtonThird; } } } } /* Map led flags as defined in kbd_kern.h to bits for Apple keyboard. */ static unsigned char mac_ledmap[8] = { 0, /* none */ 4, /* scroll lock */ 1, /* num lock */ 5, /* scroll + num lock */ 2, /* caps lock */ 6, /* caps + scroll lock */ 3, /* caps + num lock */ 7, /* caps + num + scroll lock */ }; static struct adb_request led_request; static int leds_pending; void mackbd_leds(unsigned char leds) { if (led_request.complete) { adb_request(&led_request, leds_done, 0, 3, ADB_WRITEREG(ADB_KEYBOARD, KEYB_LEDREG), 0xff, ~mac_ledmap[leds]); } else leds_pending = leds | 0x100; } static void leds_done(struct adb_request *req) { int leds; if (leds_pending) { leds = leds_pending & 0xff; leds_pending = 0; mackbd_leds(leds); } } void mackbd_init_hw(void) { struct adb_request req; /* initialize mouse interrupt hook */ adb_mouse_interrupt_hook = NULL; /* assume broken mouse :-) - should be adjusted based on * result of the mouse setup !! (or passed as kernel option) */ adb_emulate_button2 = 1; adb_emulate_button3 = 1; adb_register(ADB_KEYBOARD, keyboard_input); adb_register(ADB_MOUSE, mouse_input); /* turn off all leds */ adb_request(&req, NULL, ADBREQ_SYNC, 3, ADB_WRITEREG(ADB_KEYBOARD, KEYB_LEDREG), 0xff, 0xff); /* get the keyboard to send separate codes for left and right shift, control, option keys. */ adb_request(&req, NULL, ADBREQ_SYNC, 3, ADB_WRITEREG(ADB_KEYBOARD, 3), 0, 3); led_request.complete = 1; /* Try to switch the mouse (id 3) to handler 4, for three-button mode. (0x20 is Service Request Enable, 0x03 is Device ID). */ adb_request(&req, NULL, ADBREQ_SYNC, 3, ADB_WRITEREG(ADB_MOUSE, 3), 0x23, 4 ); }