# # Network device configuration # mainmenu_option next_comment comment 'ARCnet devices' tristate 'ARCnet support' CONFIG_ARCNET if [ "$CONFIG_ARCNET" != "n" ]; then bool ' Enable arc0e (ARCnet "Ether-Encap" packet format)' CONFIG_ARCNET_ETH bool ' Enable arc0s (ARCnet RFC1051 packet format)' CONFIG_ARCNET_1051 dep_tristate ' ARCnet COM90xx (normal) chipset driver' CONFIG_ARCNET_COM90xx $CONFIG_ARCNET dep_tristate ' ARCnet COM90xx (IO mapped) chipset driver' CONFIG_ARCNET_COM90xxIO $CONFIG_ARCNET dep_tristate ' ARCnet COM90xx (RIM I) chipset driver' CONFIG_ARCNET_RIM_I $CONFIG_ARCNET dep_tristate ' ARCnet COM20020 chipset driver' CONFIG_ARCNET_COM20020 $CONFIG_ARCNET fi endmenu tristate 'Dummy net driver support' CONFIG_DUMMY tristate 'EQL (serial line load balancing) support' CONFIG_EQUALIZER if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then if [ "$CONFIG_NETLINK" = "y" ]; then tristate 'Ethertap network tap (EXPERIMENTAL)' CONFIG_ETHERTAP fi fi tristate 'General Instruments Surfboard 1000' CONFIG_NET_SB1000 # # Ethernet # mainmenu_option next_comment comment 'Ethernet (10 or 100Mbit)' bool 'Ethernet (10 or 100Mbit)' CONFIG_NET_ETHERNET if [ "$CONFIG_NET_ETHERNET" = "y" ]; then if [ "$CONFIG_ARM" = "y" ]; then if [ "$CONFIG_ARCH_ACORN" != "y" ]; then tristate ' AM79C961A support' CONFIG_ARM_AM79C961A else source drivers/acorn/net/Config.in fi fi if [ "$CONFIG_PPC" = "y" ]; then tristate ' MACE (Power Mac ethernet) support' CONFIG_MACE tristate ' BMAC (G3 ethernet) support' CONFIG_BMAC tristate ' Symbios 53c885 (Synergy ethernet) support' CONFIG_NCR885E fi if [ "$CONFIG_ZORRO" = "y" ]; then tristate ' Ariadne support' CONFIG_ARIADNE tristate ' Ariadne II support' CONFIG_ARIADNE2 tristate ' A2065 support' CONFIG_A2065 tristate ' Hydra support' CONFIG_HYDRA fi if [ "$CONFIG_MIPS_JAZZ" = "y" ]; then tristate ' MIPS JAZZ onboard SONIC Ethernet support' CONFIG_MIPS_JAZZ_SONIC fi if [ "$CONFIG_SGI_IP27" = "y" ]; then bool ' SGI IOC3 Ethernet' CONFIG_SGI_IOC3_ETH fi bool ' 3COM cards' CONFIG_NET_VENDOR_3COM if [ "$CONFIG_NET_VENDOR_3COM" = "y" ]; then tristate ' 3c501 support' CONFIG_EL1 tristate ' 3c503 support' CONFIG_EL2 tristate ' 3c505 support' CONFIG_ELPLUS if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then tristate ' 3c507 support (EXPERIMENTAL)' CONFIG_EL16 fi tristate ' 3c509/3c529 (MCA)/3c579 support' CONFIG_EL3 tristate ' 3c515 ISA Fast EtherLink' CONFIG_3C515 if [ "$CONFIG_MCA" = "y" ]; then tristate ' 3c523 support' CONFIG_ELMC if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then tristate ' 3c527 support (EXPERIMENTAL)' CONFIG_ELMC_II fi fi tristate ' 3c590/3c900 series (592/595/597) "Vortex/Boomerang" support' CONFIG_VORTEX fi tristate ' AMD LANCE and PCnet (AT1500 and NE2100) support' CONFIG_LANCE bool ' Western Digital/SMC cards' CONFIG_NET_VENDOR_SMC if [ "$CONFIG_NET_VENDOR_SMC" = "y" ]; then tristate ' WD80*3 support' CONFIG_WD80x3 if [ "$CONFIG_MCA" = "y" ]; then tristate ' SMC Ultra MCA support' CONFIG_ULTRAMCA fi tristate ' SMC Ultra support' CONFIG_ULTRA tristate ' SMC Ultra32 EISA support' CONFIG_ULTRA32 tristate ' SMC 9194 support' CONFIG_SMC9194 fi bool ' Racal-Interlan (Micom) NI cards' CONFIG_NET_VENDOR_RACAL if [ "$CONFIG_NET_VENDOR_RACAL" = "y" ]; then if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then tristate ' NI5010 support (EXPERIMENTAL)' CONFIG_NI5010 fi tristate ' NI5210 support' CONFIG_NI52 tristate ' NI6510 support' CONFIG_NI65 fi if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then tristate ' RealTek 8129/8139 (not 8019/8029!) support (EXPERIMENTAL)' CONFIG_RTL8139 tristate ' DM9102 PCI Fast Ethernet Adapter support (EXPERIMENTAL)' CONFIG_DM9102 fi if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then tristate ' AT1700/1720 support (EXPERIMENTAL)' CONFIG_AT1700 fi tristate ' DEPCA, DE10x, DE200, DE201, DE202, DE422 support' CONFIG_DEPCA bool ' Other ISA cards' CONFIG_NET_ISA if [ "$CONFIG_NET_ISA" = "y" ]; then tristate ' Cabletron E21xx support' CONFIG_E2100 tristate ' EtherWORKS 3 (DE203, DE204, DE205) support' CONFIG_EWRK3 tristate ' EtherExpress 16 support' CONFIG_EEXPRESS tristate ' EtherExpressPro support' CONFIG_EEXPRESS_PRO tristate ' FMV-181/182/183/184 support' CONFIG_FMV18X tristate ' HP PCLAN+ (27247B and 27252A) support' CONFIG_HPLAN_PLUS tristate ' HP PCLAN (27245 and other 27xxx series) support' CONFIG_HPLAN tristate ' HP 10/100VG PCLAN (ISA, EISA, PCI) support' CONFIG_HP100 if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then tristate ' ICL EtherTeam 16i/32 support (EXPERIMENTAL)' CONFIG_ETH16I fi tristate ' NE2000/NE1000 support' CONFIG_NE2000 if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then tristate ' SEEQ8005 support (EXPERIMENTAL)' CONFIG_SEEQ8005 fi bool ' SK_G16 support' CONFIG_SK_G16 fi if [ "$CONFIG_MCA" = "y" ]; then tristate ' SKnet MCA support' CONFIG_SKMC tristate ' NE/2 (ne2000 MCA version) support' CONFIG_NE2_MCA fi bool ' EISA, VLB, PCI and on board controllers' CONFIG_NET_EISA if [ "$CONFIG_NET_EISA" = "y" ]; then tristate ' AMD PCnet32 (VLB and PCI) support' CONFIG_PCNET32 if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then tristate ' Adaptec Starfire support (EXPERIMENTAL)' CONFIG_ADAPTEC_STARFIRE fi if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then tristate ' Ansel Communications EISA 3200 support (EXPERIMENTAL)' CONFIG_AC3200 fi tristate ' Apricot Xen-II on board Ethernet' CONFIG_APRICOT tristate ' CS89x0 support' CONFIG_CS89x0 tristate ' Generic DECchip & DIGITAL EtherWORKS PCI/EISA' CONFIG_DE4X5 tristate ' DECchip Tulip (dc21x4x) PCI support' CONFIG_DEC_ELCP tristate ' Digi Intl. RightSwitch SE-X support' CONFIG_DGRS tristate ' EtherExpressPro/100 support' CONFIG_EEXPRESS_PRO100 if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then tristate ' Mylex EISA LNE390A/B support (EXPERIMENTAL)' CONFIG_LNE390 tristate ' Novell/Eagle/Microdyne NE3210 EISA support (EXPERIMENTAL)' CONFIG_NE3210 fi tristate ' PCI NE2000 support' CONFIG_NE2K_PCI # tristate ' Sundance Alta support' CONFIG_ALTA tristate ' SiS 900/7016 PCI Fast Ethernet Adapter support' CONFIG_SIS900 tristate ' TI ThunderLAN support' CONFIG_TLAN tristate ' VIA Rhine support' CONFIG_VIA_RHINE if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then tristate ' Racal-Interlan EISA ES3210 support (EXPERIMENTAL)' CONFIG_ES3210 tristate ' SMC EtherPower II (EXPERIMENTAL)' CONFIG_EPIC100 bool ' Zenith Z-Note support (EXPERIMENTAL)' CONFIG_ZNET fi fi bool ' Pocket and portable adapters' CONFIG_NET_POCKET if [ "$CONFIG_NET_POCKET" = "y" ]; then bool ' AT-LAN-TEC/RealTek pocket adapter support' CONFIG_ATP tristate ' D-Link DE600 pocket adapter support' CONFIG_DE600 tristate ' D-Link DE620 pocket adapter support' CONFIG_DE620 fi fi endmenu # # Gigabit Ethernet # mainmenu_option next_comment comment 'Ethernet (1000 Mbit)' if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then # tristate 'Packet Engines Hamachi GNIC-II support (EXPERIMENTAL)' CONFIG_HAMACHI tristate 'Packet Engines Yellowfin Gigabit-NIC support (EXPERIMENTAL)' CONFIG_YELLOWFIN fi tristate 'Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support' CONFIG_ACENIC if [ "$CONFIG_ACENIC" != "n" ]; then bool ' Omit support for old Tigon I based AceNICs' CONFIG_ACENIC_OMIT_TIGON_I fi tristate 'SysKonnect SK-98xx support' CONFIG_SK98LIN endmenu bool 'FDDI driver support' CONFIG_FDDI if [ "$CONFIG_FDDI" = "y" ]; then bool ' Digital DEFEA and DEFPA adapter support' CONFIG_DEFXX fi if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then bool 'HIPPI driver support (EXPERIMENTAL)' CONFIG_HIPPI if [ "$CONFIG_HIPPI" = "y" ]; then tristate ' Essential RoadRunner HIPPI PCI adapter support' CONFIG_ROADRUNNER if [ "$CONFIG_ROADRUNNER" != "n" ]; then bool ' Use large TX/RX rings' CONFIG_ROADRUNNER_LARGE_RINGS fi fi fi # # AppleTalk # if [ "$CONFIG_ATALK" != "n" ]; then mainmenu_option next_comment comment 'Appletalk devices' dep_tristate 'Apple/Farallon LocalTalk PC support' CONFIG_LTPC $CONFIG_ATALK dep_tristate 'COPS LocalTalk PC support' CONFIG_COPS $CONFIG_ATALK if [ "$CONFIG_COPS" != "n" ]; then bool ' Dayna firmware support' CONFIG_COPS_DAYNA bool ' Tangent firmware support' CONFIG_COPS_TANGENT fi dep_tristate 'Appletalk-IP driver support' CONFIG_IPDDP $CONFIG_ATALK if [ "$CONFIG_IPDDP" != "n" ]; then bool ' IP to Appletalk-IP Encapsulation support' CONFIG_IPDDP_ENCAP bool ' Appletalk-IP to IP Decapsulation support' CONFIG_IPDDP_DECAP fi endmenu fi if [ ! "$CONFIG_PARPORT" = "n" ]; then dep_tristate 'PLIP (parallel port) support' CONFIG_PLIP $CONFIG_PARPORT fi tristate 'PPP (point-to-point protocol) support' CONFIG_PPP if [ ! "$CONFIG_PPP" = "n" ]; then dep_tristate ' PPP support for async serial ports' CONFIG_PPP_ASYNC $CONFIG_PPP dep_tristate ' PPP support for sync tty ports' CONFIG_PPP_SYNC_TTY $CONFIG_PPP dep_tristate ' PPP Deflate compression' CONFIG_PPP_DEFLATE $CONFIG_PPP dep_tristate ' PPP BSD-Compress compression' CONFIG_PPP_BSDCOMP m fi tristate 'SLIP (serial line) support' CONFIG_SLIP if [ "$CONFIG_SLIP" != "n" ]; then bool ' CSLIP compressed headers' CONFIG_SLIP_COMPRESSED bool ' Keepalive and linefill' CONFIG_SLIP_SMART bool ' Six bit SLIP encapsulation' CONFIG_SLIP_MODE_SLIP6 fi mainmenu_option next_comment comment 'Wireless LAN (non-hamradio)' bool 'Wireless LAN (non-hamradio)' CONFIG_NET_RADIO if [ "$CONFIG_NET_RADIO" = "y" ]; then dep_tristate ' STRIP (Metricom starmode radio IP)' CONFIG_STRIP $CONFIG_INET tristate ' AT&T WaveLAN & DEC RoamAbout DS support' CONFIG_WAVELAN tristate ' Aironet Arlan 655 & IC2200 DS support' CONFIG_ARLAN tristate ' Aironet 4500/4800 series adapters' CONFIG_AIRONET4500 dep_tristate ' Aironet 4500/4800 ISA/PCI/PNP/365 support ' CONFIG_AIRONET4500_NONCS $CONFIG_AIRONET4500 if [ "$CONFIG_AIRONET4500" != "n" -a "$CONFIG_AIRONET4500_NONCS" != "n" ]; then bool ' Aironet 4500/4800 PNP support ' CONFIG_AIRONET4500_PNP dep_bool ' Aironet 4500/4800 PCI support ' CONFIG_AIRONET4500_PCI $CONFIG_PCI dep_bool ' Aironet 4500/4800 ISA broken support (EXPERIMENTAL)' CONFIG_AIRONET4500_ISA $CONFIG_EXPERIMENTAL dep_bool ' Aironet 4500/4800 I365 broken support (EXPERIMENTAL)' CONFIG_AIRONET4500_I365 $CONFIG_EXPERIMENTAL fi dep_tristate ' Aironet 4500/4800 PROC interface ' CONFIG_AIRONET4500_PROC $CONFIG_AIRONET4500 m fi endmenu source drivers/net/tokenring/Config.in bool 'Fibre Channel driver support' CONFIG_NET_FC if [ "$CONFIG_NET_FC" = "y" ]; then dep_tristate ' Interphase 5526 Tachyon chipset based adapter support' CONFIG_IPHASE5526 $CONFIG_SCSI fi if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then tristate 'Red Creek Hardware VPN (EXPERIMENTAL)' CONFIG_RCPCI tristate 'Traffic Shaper (EXPERIMENTAL)' CONFIG_SHAPER fi source drivers/net/wan/Config.in if [ "$CONFIG_PCMCIA" != "n" ]; then source drivers/net/pcmcia/Config.in fi