comment 'AX.25 network device drivers' dep_tristate 'Userspace device driver support' CONFIG_AX25_USERDEV $CONFIG_AX25 dep_tristate 'Serial port KISS driver' CONFIG_KISS $CONFIG_AX25 dep_tristate 'Serial port 6PACK driver' CONFIG_6PACK $CONFIG_AX25 dep_tristate 'BPQ Ethernet driver' CONFIG_BPQETHER $CONFIG_AX25 dep_tristate 'High-speed (DMA) SCC driver for AX.25' CONFIG_DMASCC $CONFIG_AX25 dep_tristate 'Z8530 SCC driver' CONFIG_SCC $CONFIG_AX25 if [ "$CONFIG_SCC" != "n" ]; then bool ' additional delay for PA0HZP OptoSCC compatible boards' CONFIG_SCC_DELAY bool ' support for TRX that feedback the tx signal to rx' CONFIG_SCC_TRXECHO fi dep_tristate 'BAYCOM ser12 fullduplex driver for AX.25' CONFIG_BAYCOM_SER_FDX $CONFIG_AX25 dep_tristate 'BAYCOM ser12 halfduplex driver for AX.25' CONFIG_BAYCOM_SER_HDX $CONFIG_AX25 dep_tristate 'BAYCOM picpar and par96 driver for AX.25' CONFIG_BAYCOM_PAR $CONFIG_PARPORT $CONFIG_AX25 dep_tristate 'BAYCOM epp driver for AX.25' CONFIG_BAYCOM_EPP $CONFIG_PARPORT $CONFIG_AX25 dep_tristate 'Soundcard modem driver' CONFIG_SOUNDMODEM $CONFIG_PARPORT $CONFIG_AX25 if [ "$CONFIG_SOUNDMODEM" != "n" ]; then bool ' soundmodem support for Soundblaster and compatible cards' CONFIG_SOUNDMODEM_SBC bool ' soundmodem support for WSS and Crystal cards' CONFIG_SOUNDMODEM_WSS bool ' soundmodem support for 1200 baud AFSK modulation' CONFIG_SOUNDMODEM_AFSK1200 bool ' soundmodem support for 2400 baud AFSK modulation (7.3728MHz crystal)' CONFIG_SOUNDMODEM_AFSK2400_7 bool ' soundmodem support for 2400 baud AFSK modulation (8MHz crystal)' CONFIG_SOUNDMODEM_AFSK2400_8 bool ' soundmodem support for 2666 baud AFSK modulation' CONFIG_SOUNDMODEM_AFSK2666 bool ' soundmodem support for 4800 baud HAPN-1 modulation' CONFIG_SOUNDMODEM_HAPN4800 bool ' soundmodem support for 4800 baud PSK modulation' CONFIG_SOUNDMODEM_PSK4800 bool ' soundmodem support for 9600 baud FSK G3RUH modulation' CONFIG_SOUNDMODEM_FSK9600 fi dep_tristate 'YAM driver for AX.25' CONFIG_YAM $CONFIG_AX25