#undef PT_DEBUG 1 /* * pt.c: Linux device driver for the Gracilis PackeTwin. * Copyright (c) 1995 Craig Small VK2XLZ (vk2xlz@vk2xlz.ampr.org.) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2, as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software Foundation, * Inc., 675 Mass Ave, Cambridge MA 02139, USA. * * This driver is largely based upon the PI driver by David Perry. * * Revision History * 23/02/95 cs Started again on driver, last one scrapped * 27/02/95 cs Program works, we have chan A only. Tx stays on * 28/02/95 cs Fix Tx problem (& TxUIE instead of | ) * Fix Chan B Tx timer problem, used TMR2 instead of TMR1 * 03/03/95 cs Painfully found out (after 3 days) SERIAL_CFG is write only * created image of it and DMA_CFG * 21/06/95 cs Upgraded to suit PI driver 0.8 ALPHA * 22/08/95 cs Changed it all around to make it like pi driver * 23/08/95 cs It now works, got caught again by TMR2 and we must have * auto-enables for daughter boards. * 07/10/95 cs Fixed for 1.3.30 (hopefully) * 26/11/95 cs Fixed for 1.3.43, ala 29/10 for pi2.c by ac * 21/12/95 cs Got rid of those nasty warnings when compiling, for 1.3.48 * 08/08/96 jsn Convert to use as a module. Removed send_kiss, empty_scc and * pt_loopback functions - they were unused. * 13/12/96 jsn Fixed to match Linux networking changes. */ /* * default configuration of the PackeTwin, * ie What Craig uses his PT for. */ #define PT_DMA 3 #define DEF_A_SPEED 4800 /* 4800 baud */ #define DEF_A_TXDELAY 350 /* 350 mS */ #define DEF_A_PERSIST 64 /* 25% persistence */ #define DEF_A_SLOTIME 10 /* 10 mS */ #define DEF_A_SQUELDELAY 30 /* 30 mS */ #define DEF_A_CLOCKMODE 0 /* Normal clock mode */ #define DEF_A_NRZI 1 /* NRZI mode */ #define DEF_B_SPEED 0 /* 0 means external clock */ #define DEF_B_TXDELAY 250 /* 250 mS */ #define DEF_B_PERSIST 64 /* 25% */ #define DEF_B_SLOTIME 10 /* 10 mS */ #define DEF_B_SQUELDELAY 30 /* 30 mS */ #define DEF_B_CLOCKMODE 0 /* Normal clock mode ?!? */ #define DEF_B_NRZI 1 /* NRZI mode */ #define PARAM_TXDELAY 1 #define PARAM_PERSIST 2 #define PARAM_SLOTTIME 3 #define PARAM_FULLDUP 5 #define PARAM_HARDWARE 6 #define PARAM_RETURN 255 #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "z8530.h" #include struct mbuf { struct mbuf *next; int cnt; char data[0]; }; /* * The actual PT devices we will use */ static int pt0_preprobe(struct device *dev) {return 0;} /* Dummy probe function */ static struct device pt0a = { "pt0a", 0, 0, 0, 0, 0, 0, 0, 0, 0, NULL, pt0_preprobe }; static struct device pt0b = { "pt0b", 0, 0, 0, 0, 0, 0, 0, 0, 0, NULL, pt0_preprobe }; /* Ok, they shouldn't be here, but both channels share them */ /* The Images of the Serial and DMA config registers */ static unsigned char pt_sercfg = 0; static unsigned char pt_dmacfg = 0; /* The number of IO ports used by the card */ #define PT_TOTAL_SIZE 16 /* Index to functions, as function prototypes. */ static int pt_probe(struct device *dev); static int pt_open(struct device *dev); static int pt_send_packet(struct sk_buff *skb, struct device *dev); static void pt_interrupt(int irq, void *dev_id, struct pt_regs *regs); static int pt_close(struct device *dev); static int pt_ioctl(struct device *dev, struct ifreq *ifr, int cmd); static struct net_device_stats *pt_get_stats(struct device *dev); static void pt_rts(struct pt_local *lp, int x); static void pt_rxisr(struct device *dev); static void pt_txisr(struct pt_local *lp); static void pt_exisr(struct pt_local *lp); static void pt_tmrisr(struct pt_local *lp); static char *get_dma_buffer(unsigned long *mem_ptr); static int valid_dma_page(unsigned long addr, unsigned long dev_buffsize); static int hw_probe(int ioaddr); static void tdelay(struct pt_local *lp, int time); static void chipset_init(struct device *dev); static char ax25_bcast[7] = {'Q' << 1, 'S' << 1, 'T' << 1, ' ' << 1, ' ' << 1, ' ' << 1, '0' << 1}; static char ax25_test[7] = {'L' << 1, 'I' << 1, 'N' << 1, 'U' << 1, 'X' << 1, ' ' << 1, '1' << 1}; static int ext2_secrm_seed = 152; static inline unsigned char random(void) { return (unsigned char) (ext2_secrm_seed = ext2_secrm_seed * 60691 + 1); } static inline void wrtscc(int cbase, int ctl, int sccreg, unsigned char val) { outb_p(sccreg, ctl); /* Select register */ outb_p(val, ctl); /* Output value */ } static inline unsigned char rdscc(int cbase, int ctl, int sccreg) { unsigned char retval; outb_p(sccreg, ctl); /* Select register */ retval = inb_p(ctl); return retval; } static void switchbuffers(struct pt_local *lp) { if (lp->rcvbuf == lp->rxdmabuf1) lp->rcvbuf = lp->rxdmabuf2; else lp->rcvbuf = lp->rxdmabuf1; } static void hardware_send_packet(struct pt_local *lp, struct sk_buff *skb) { char kickflag; unsigned long flags; char *ptr; struct device *dev; /* First, let's see if this packet is actually a KISS packet */ ptr = skb->data; if (ptr[0] != 0 && skb->len >= 2) { #ifdef PT_DEBUG printk(KERN_DEBUG "PT: Rx KISS... Control = %d, value = %d.\n", ptr[0], (skb->len > 1? ptr[1] : -1)); #endif /* Kludge to get device */ if ((struct pt_local*)(&pt0b.priv) == lp) dev = &pt0b; else dev = &pt0a; switch(ptr[0]) { case PARAM_TXDELAY: /*TxDelay is in 10mS increments */ lp->txdelay = ptr[1] * 10; break; case PARAM_PERSIST: lp->persist = ptr[1]; break; case PARAM_SLOTTIME: lp->slotime = ptr[1]; break; case PARAM_FULLDUP: /* Yeah right, you wish! Fullduplex is a little while to * go folks, but this is how you fire it up */ break; /* Perhaps we should have txtail here?? */ } /*switch */ return; } lp->stats.tx_packets++; lp->stats.tx_bytes+=skb->len; save_flags(flags); cli(); kickflag = (skb_peek(&lp->sndq) == NULL) && (lp->sndbuf == NULL); restore_flags(flags); #ifdef PT_DEBUG printk(KERN_DEBUG "PT: hardware_send_packet(): kickflag = %d (%d).\n", kickflag, lp->base & CHANA); #endif skb_queue_tail(&lp->sndq, skb); if (kickflag) { /* Simulate interrupt to transmit */ if (lp->dmachan) pt_txisr(lp); else { save_flags(flags); cli(); if (lp->tstate == IDLE) pt_txisr(lp); restore_flags(flags); } } } /* hardware_send_packet() */ static void setup_rx_dma(struct pt_local *lp) { unsigned long flags; int cmd; unsigned long dma_abs; unsigned char dmachan; save_flags(flags); cli(); dma_abs = (unsigned long) (lp->rcvbuf->data); dmachan = lp->dmachan; cmd = lp->base + CTL; if(!valid_dma_page(dma_abs, DMA_BUFF_SIZE + sizeof(struct mbuf))) panic("PI: RX buffer violates DMA boundary!"); /* Get ready for RX DMA */ wrtscc(lp->cardbase, cmd, R1, WT_FN_RDYFN | WT_RDY_RT | INT_ERR_Rx | EXT_INT_ENAB); disable_dma(dmachan); clear_dma_ff(dmachan); /* * Set DMA mode register to single transfers, incrementing address, * auto init, writes */ set_dma_mode(dmachan, DMA_MODE_READ | 0x10); set_dma_addr(dmachan, dma_abs); set_dma_count(dmachan, lp->bufsiz); enable_dma(dmachan); /* * If a packet is already coming in, this line is supposed to * avoid receiving a partial packet. */ wrtscc(lp->cardbase, cmd, R0, RES_Rx_CRC); /* Enable RX dma */ wrtscc(lp->cardbase, cmd, R1, WT_RDY_ENAB | WT_FN_RDYFN | WT_RDY_RT | INT_ERR_Rx | EXT_INT_ENAB); restore_flags(flags); } static void setup_tx_dma(struct pt_local *lp, int length) { unsigned long dma_abs; unsigned long flags; unsigned long dmachan; save_flags(flags); cli(); dmachan = lp->dmachan; dma_abs = (unsigned long) (lp->txdmabuf); if(!valid_dma_page(dma_abs, DMA_BUFF_SIZE + sizeof(struct mbuf))) panic("PT: TX buffer violates DMA boundary!"); disable_dma(dmachan); /* Set DMA mode register to single transfers, incrementing address, * no auto init, reads */ set_dma_mode(dmachan, DMA_MODE_WRITE); clear_dma_ff(dmachan); set_dma_addr(dmachan, dma_abs); /* output byte count */ set_dma_count(dmachan, length); restore_flags(flags); } /* * This sets up all the registers in the SCC for the given channel * based upon tsync_hwint() */ static void scc_init(struct device *dev) { unsigned long flags; struct pt_local *lp = (struct pt_local*) dev->priv; register int cmd = lp->base + CTL; int tc, br; #ifdef PT_DEBUG printk(KERN_DEBUG "PT: scc_init(): (%d).\n", lp->base & CHANA); #endif save_flags(flags); cli(); /* We may put something here to enable_escc */ if (cmd & CHANA) { wrtscc(lp->cardbase, cmd, R9, CHRA); /* Reset channel A */ wrtscc(lp->cardbase, cmd, R2, 0xff); /* Initialise interrupt vector */ } else wrtscc(lp->cardbase, cmd, R9, CHRB); /* Reset channel B */ /* Deselect all Rx and Tx interrupts */ wrtscc(lp->cardbase, cmd, R1, 0); /* Turn off external interrupts (like CTS/CD) */ wrtscc(lp->cardbase, cmd, R15, 0); /* X1 clock, SDLC mode */ wrtscc(lp->cardbase, cmd, R4, SDLC | X1CLK); /* Preset CRC and set mode */ if (lp->nrzi) /* Preset Tx CRC, put into NRZI mode */ wrtscc(lp->cardbase, cmd, R10, CRCPS | NRZI); else /* Preset Tx CRC, put into NRZ mode */ wrtscc(lp->cardbase, cmd, R10, CRCPS); /* Tx/Rx parameters */ if (lp->speed) /* Use internal clocking */ /* Tx Clk from BRG. Rx Clk form DPLL, TRxC pin outputs DPLL */ wrtscc(lp->cardbase, cmd, R11, TCBR | RCDPLL | TRxCDP | TRxCOI); else /* Use external clocking */ { /* Tx Clk from TRxCL. Rx Clk from RTxCL, TRxC pin if input */ wrtscc(lp->cardbase, cmd, R11, TCTRxCP | RCRTxCP | TRxCBR); wrtscc(lp->cardbase,cmd, R14, 0); /* wiz1 */ } /* Null out SDLC start address */ wrtscc(lp->cardbase, cmd, R6, 0); /* SDLC flag */ wrtscc(lp->cardbase, cmd, R7, FLAG); /* Setup Tx but don't enable it */ wrtscc(lp->cardbase, cmd, R5, Tx8 | DTR); /* Setup Rx */ wrtscc(lp->cardbase, cmd, R3, AUTO_ENAB | Rx8); /* Setup the BRG, turn it off first */ wrtscc(lp->cardbase, cmd, R14, BRSRC); /* set the 32x time constant for the BRG in Rx mode */ if (lp->speed) { br = lp->speed; tc = ((lp->xtal / 32) / (br * 2)) - 2; wrtscc(lp->cardbase, cmd, R12, tc & 0xff); /* lower byte */ wrtscc(lp->cardbase, cmd, R13, (tc >> 8) & 0xff); /* upper byte */ } /* Turn transmitter off, to setup stuff */ pt_rts(lp, OFF); /* External clocking */ if (lp->speed) { /* DPLL frm BRG, BRG src PCLK */ wrtscc(lp->cardbase, cmd, R14, BRSRC | SSBR); wrtscc(lp->cardbase, cmd, R14, BRSRC | SEARCH); /* SEARCH mode, keep BRG src */ wrtscc(lp->cardbase, cmd, R14, BRSRC | BRENABL); /* Enable the BRG */ /* Turn off external clock port */ if (lp->base & CHANA) outb_p( (pt_sercfg &= ~PT_EXTCLKA), (lp->cardbase + SERIAL_CFG) ); else outb_p( (pt_sercfg &= ~PT_EXTCLKB), (lp->cardbase + SERIAL_CFG) ); } else { /* DPLL frm rtxc,BRG src PCLK */ /* Turn on external clock port */ if (lp->base & CHANA) outb_p( (pt_sercfg |= PT_EXTCLKA), (lp->cardbase + SERIAL_CFG) ); else outb_p( (pt_sercfg |= PT_EXTCLKB), (lp->cardbase + SERIAL_CFG) ); } if (!lp->dmachan) wrtscc(lp->cardbase, cmd, R1, (INT_ALL_Rx | EXT_INT_ENAB)); wrtscc(lp->cardbase, cmd, R15, BRKIE); /* ABORT int */ /* Turn on the DTR to tell modem we're alive */ if (lp->base & CHANA) outb_p( (pt_sercfg |= PT_DTRA_ON), (lp->cardbase + SERIAL_CFG) ); else outb_p( (pt_sercfg |= PT_DTRB_ON), (lp->cardbase + SERIAL_CFG) ); /* Now, turn on the receiver and hunt for a flag */ wrtscc(lp->cardbase, cmd, R3, RxENABLE | RxCRC_ENAB | AUTO_ENAB | Rx8 ); restore_flags(flags); } /* scc_init() */ /* Resets the given channel and whole SCC if both channels off */ static void chipset_init(struct device *dev) { struct pt_local *lp = (struct pt_local*) dev->priv; #ifdef PT_DEBUG printk(KERN_DEBUG "PT: chipset_init(): pt0a tstate = %d.\n", ((struct pt_local*)pt0a.priv)->tstate); printk(KERN_DEBUG "PT: chipset_init(): pt0b tstate = %d.\n", ((struct pt_local*)pt0b.priv)->tstate); #endif /* Reset SCC if both channels are to be canned */ if ( ((lp->base & CHANA) && !(pt_sercfg & PT_DTRB_ON)) || (!(lp->base & CHANA) && !(pt_sercfg & PT_DTRA_ON)) ) { wrtscc(lp->cardbase, lp->base + CTL, R9, FHWRES); /* Reset int and dma registers */ outb_p((pt_sercfg = 0), lp->cardbase + SERIAL_CFG); outb_p((pt_dmacfg = 0), lp->cardbase + DMA_CFG); #ifdef PT_DEBUG printk(KERN_DEBUG "PT: chipset_init() Resetting SCC, called by ch (%d).\n", lp->base & CHANA); #endif } /* Reset individual channel */ if (lp->base & CHANA) { wrtscc(lp->cardbase, lp->base + CTL, R9, MIE | DLC | NV | CHRA); outb_p( (pt_sercfg &= ~PT_DTRA_ON), lp->cardbase + SERIAL_CFG); } else { wrtscc(lp->cardbase, lp->base + CTL, R9, MIE | DLC | NV | CHRB); outb_p( (pt_sercfg &= ~PT_DTRB_ON), lp->cardbase + SERIAL_CFG); } } /* chipset_init() */ int __init pt_init(void) { int *port; int ioaddr = 0; int card_type = 0; int ports[] = { 0x230, 0x240, 0x250, 0x260, 0x270, 0x280, 0x290, 0x2a0, 0x2b0, 0x300, 0x330, 0x3f0, 0}; printk(KERN_INFO "PT: 0.41 ALPHA 07 October 1995 Craig Small (csmall@small.dropbear.id.au)\n"); for (port = &ports[0]; *port && !card_type; port++) { ioaddr = *port; if (check_region(ioaddr, PT_TOTAL_SIZE) == 0) { printk(KERN_INFO "PT: Probing for card at address %#3x\n", ioaddr); card_type = hw_probe(ioaddr); } } if (card_type) { printk(KERN_INFO "PT: Found a PT at address %#3x\n",ioaddr); } else { printk(KERN_ERR "PT: ERROR: No card found.\n"); return -EIO; } /* * Link a couple of device structures into the chain * * For the A port * Allocate space for 4 buffers even though we only need 3, * because one of them may cross a DMA page boundary and * be rejected by get_dma_buffer(). */ register_netdev(&pt0a); pt0a.priv= kmalloc(sizeof(struct pt_local) + (DMA_BUFF_SIZE + sizeof(struct mbuf)) * 4, GFP_KERNEL | GFP_DMA); pt0a.dma = 0; /* wizzer - no dma yet */ pt0a.base_addr = ioaddr + CHANA; pt0a.irq = 0; /* And B port */ register_netdev(&pt0b); pt0b.priv= kmalloc(sizeof(struct pt_local) + (DMA_BUFF_SIZE + sizeof(struct mbuf)) * 4, GFP_KERNEL | GFP_DMA); pt0b.base_addr = ioaddr + CHANB; pt0b.irq = 0; /* Now initialise them */ pt_probe(&pt0a); pt_probe(&pt0b); pt0b.irq = pt0a.irq; /* IRQ is shared */ return 0; } /* pt_init() */ /* * Probe for PT card. Also initialises the timers */ static int __init hw_probe(int ioaddr) { int time = 1000; /* Number of milliseconds to test */ int a = 1; int b = 1; unsigned long start_time, end_time; inb_p(ioaddr + TMR1CLR); inb_p(ioaddr + TMR2CLR); /* Timer counter channel 0, 1mS period */ outb_p(SC0 | LSB_MSB | MODE3, ioaddr + TMRCMD); outb_p(0x00, ioaddr + TMR0); outb_p(0x18, ioaddr + TMR0); /* Setup timer control word for timer 1 */ outb_p(SC1 | LSB_MSB | MODE0, ioaddr + TMRCMD); outb_p((time << 1) & 0xff, ioaddr + TMR1); outb_p((time >> 7) & 0xff, ioaddr + TMR1); /* wait until counter reg is loaded */ do { /* Latch count for reading */ outb_p(SC1, ioaddr + TMRCMD); a = inb_p(ioaddr + TMR1); b = inb_p(ioaddr + TMR1); } while (b == 0); start_time = jiffies; while(b != 0) { /* Latch count for reading */ outb_p(SC1, ioaddr + TMRCMD); a = inb_p(ioaddr + TMR1); b = inb_p(ioaddr + TMR1); end_time = jiffies; /* Don't wait forever - there may be no card here */ if ((end_time - start_time) > 200) { inb_p(ioaddr + TMR1CLR); return 0; } } /* Now fix the timers up for general operation */ /* Clear the timers */ inb_p(ioaddr + TMR1CLR); inb_p(ioaddr + TMR2CLR); outb_p(SC1 | LSB_MSB | MODE0, ioaddr + TMRCMD); inb_p(ioaddr + TMR1CLR); outb_p(SC2 | LSB_MSB | MODE0, ioaddr + TMRCMD); /* Should this be tmr1 or tmr2? wiz3*/ inb_p(ioaddr + TMR1CLR); return 1; } /* hw_probe() */ static void pt_rts(struct pt_local *lp, int x) { int tc; long br; int cmd = lp->base + CTL; #ifdef PT_DEBUG printk(KERN_DEBUG "PT: pt_rts(): Transmitter status will be %d (%d).\n", x, lp->base & CHANA); #endif if (x == ON) { /* Ex ints off to avoid int */ wrtscc(lp->cardbase, cmd, R15, 0); wrtscc(lp->cardbase, cmd, R3, AUTO_ENAB | Rx8); /* Rx off */ lp->rstate = IDLE; if(lp->dmachan) { /* Setup for Tx DMA */ wrtscc(lp->cardbase, cmd, R1, WT_FN_RDYFN | EXT_INT_ENAB); } else { /* No interrupts */ wrtscc(lp->cardbase, cmd, R1, 0); } if (!lp->clockmode) { if (lp->speed) { br = lp->speed; tc = (lp->xtal / (br * 2)) - 2; wrtscc(lp->cardbase, cmd, R12, tc & 0xff); wrtscc(lp->cardbase, cmd, R13, (tc >> 8) & 0xff); } } /* Turn on Tx by raising RTS */ wrtscc(lp->cardbase, cmd, R5, TxCRC_ENAB | RTS | TxENAB | Tx8 | DTR); /* Transmitter on now */ } else { /* turning off Tx */ lp->tstate = IDLE; /* Turn off Tx by dropping RTS */ wrtscc(lp->cardbase, cmd, R5, Tx8 | DTR); if (!lp->clockmode) { if (lp->speed) /* internally clocked */ { /* Reprogram BRG from 32x clock for Rx DPLL */ /* BRG off, keep PClk source */ wrtscc(lp->cardbase, cmd, R14, BRSRC); br = lp->speed; tc = ((lp->xtal / 32) / (br * 2)) - 2; wrtscc(lp->cardbase, cmd, R12, tc & 0xff); wrtscc(lp->cardbase, cmd, R13, (tc >> 8) & 0xff); /* SEARCH mode, BRG source */ wrtscc(lp->cardbase, cmd, R14, BRSRC | SEARCH); /* Enable the BRG */ wrtscc(lp->cardbase, cmd, R14, BRSRC | BRENABL); } } /* Flush Rx fifo */ /* Turn Rx off */ wrtscc(lp->cardbase, cmd, R3, AUTO_ENAB | Rx8); /* Reset error latch */ wrtscc(lp->cardbase, cmd, R0, ERR_RES); /* get status byte from R1 */ (void) rdscc(lp->cardbase, cmd, R1); /* Read and dump data in queue */ (void) rdscc(lp->cardbase, cmd, R8); (void) rdscc(lp->cardbase, cmd, R8); (void) rdscc(lp->cardbase, cmd, R8); /* Now, turn on Rx and hunt for a flag */ wrtscc(lp->cardbase, cmd, R3, RxENABLE | AUTO_ENAB | Rx8 ); lp->rstate = ACTIVE; if (lp->dmachan) { setup_rx_dma(lp); } else { /* Reset buffer pointers */ lp->rcp = lp->rcvbuf->data; lp->rcvbuf->cnt = 0; /* Allow aborts to interrupt us */ wrtscc(lp->cardbase, cmd, R1, INT_ALL_Rx | EXT_INT_ENAB); } wrtscc(lp->cardbase, cmd, R15, BRKIE ); } } /* pt_rts() */ static int valid_dma_page(unsigned long addr, unsigned long dev_bufsize) { if (((addr & 0xffff) + dev_bufsize) <= 0x10000) return 1; else return 0; } static int pt_set_mac_address(struct device *dev, void *addr) { struct sockaddr *sa = (struct sockaddr *)addr; memcpy(dev->dev_addr, sa->sa_data, dev->addr_len); /* addr is an AX.25 shifted ASCII */ return 0; /* mac address */ } /* Allocate a buffer which does not cross a DMA page boundary */ static char * get_dma_buffer(unsigned long *mem_ptr) { char *ret; ret = (char *) *mem_ptr; if (!valid_dma_page(*mem_ptr, DMA_BUFF_SIZE + sizeof(struct mbuf))) { *mem_ptr += (DMA_BUFF_SIZE + sizeof(struct mbuf)); ret = (char *) *mem_ptr; } *mem_ptr += (DMA_BUFF_SIZE + sizeof(struct mbuf)); return (ret); } /* get_dma_buffer() */ /* * Sets up all the structures for the PT device */ static int pt_probe(struct device *dev) { short ioaddr; struct pt_local *lp; unsigned long flags; unsigned long mem_ptr; ioaddr = dev->base_addr; /* * Initialise the device structure. * Must be done before chipset_init() * Make sure data structures used by the PT are aligned */ dev->priv = (void *) (((int) dev->priv + 7) & ~7); lp = (struct pt_local*) dev->priv; memset(dev->priv, 0, sizeof(struct pt_local)); /* Allocate some buffers which do not cross DMA boundaries */ mem_ptr = (unsigned long) dev->priv + sizeof(struct pt_local); lp->txdmabuf = get_dma_buffer(&mem_ptr); lp->rxdmabuf1 = (struct mbuf *) get_dma_buffer(&mem_ptr); lp->rxdmabuf2 = (struct mbuf *) get_dma_buffer(&mem_ptr); /* Initialise the Rx buffer */ lp->rcvbuf = lp->rxdmabuf1; lp->rcp = lp->rcvbuf->data; lp->rcvbuf->cnt = 0; /* Initialise the transmit queue head structure */ skb_queue_head_init(&lp->sndq); lp->base = dev->base_addr; lp->cardbase = dev->base_addr & 0x3f0; /* These need to be initialised before scc_init() is called. */ lp->xtal = XTAL; if (dev->base_addr & CHANA) { lp->speed = DEF_A_SPEED; lp->txdelay = DEF_A_TXDELAY; lp->persist = DEF_A_PERSIST; lp->slotime = DEF_A_SLOTIME; lp->squeldelay = DEF_A_SQUELDELAY; lp->clockmode = DEF_A_CLOCKMODE; lp->nrzi = DEF_A_NRZI; } else { lp->speed = DEF_B_SPEED; lp->txdelay = DEF_B_TXDELAY; lp->persist = DEF_B_PERSIST; lp->slotime = DEF_B_SLOTIME; lp->squeldelay = DEF_B_SQUELDELAY; lp->clockmode = DEF_B_CLOCKMODE; lp->nrzi = DEF_B_NRZI; } lp->bufsiz = DMA_BUFF_SIZE; lp->tstate = IDLE; chipset_init(dev); if (dev->base_addr & CHANA) { /* Note that a single IRQ services 2 devices (A and B channels) */ /* * We disable the dma for a while, we have to get ints working * properly first!! */ lp->dmachan = 0; if (dev->irq < 2) { autoirq_setup(0); /* Turn on PT interrupts */ save_flags(flags); cli(); outb_p( pt_sercfg |= PT_EI, lp->cardbase + INT_CFG); restore_flags(flags); /* Set a timer interrupt */ tdelay(lp, 1); dev->irq = autoirq_report(20); /* Turn off PT interrupts */ save_flags(flags); cli(); outb_p( (pt_sercfg &= ~ PT_EI), lp->cardbase + INT_CFG); restore_flags(flags); if (!dev->irq) { printk(KERN_ERR "PT: ERROR: Failed to detect IRQ line, assuming IRQ7.\n"); } } printk(KERN_INFO "PT: Autodetected IRQ %d, assuming DMA %d\n", dev->irq, dev->dma); /* This board has jumpered interrupts. Snarf the interrupt vector * now. There is no point in waiting since no other device can use * the interrupt, and this marks the 'irqaction' as busy. */ { int irqval = request_irq(dev->irq, &pt_interrupt,0, "pt", dev); if (irqval) { printk(KERN_ERR "PT: ERROR: Unable to get IRQ %d (irqval = %d).\n", dev->irq, irqval); return EAGAIN; } } /* Grab the region */ request_region(ioaddr & 0x3f0, PT_TOTAL_SIZE, "pt" ); } /* A port */ dev->open = pt_open; dev->stop = pt_close; dev->do_ioctl = pt_ioctl; dev->hard_start_xmit = pt_send_packet; dev->get_stats = pt_get_stats; /* Fill in the fields of the device structure */ dev_init_buffers(dev); #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE) dev->hard_header = ax25_encapsulate; dev->rebuild_header = ax25_rebuild_header; #endif dev->set_mac_address = pt_set_mac_address; dev->type = ARPHRD_AX25; /* AF_AX25 device */ dev->hard_header_len = 73; /* We do digipeaters now */ dev->mtu = 1500; /* eth_mtu is default */ dev->addr_len = 7; /* sizeof an ax.25 address */ memcpy(dev->broadcast, ax25_bcast, 7); memcpy(dev->dev_addr, ax25_test, 7); /* New style flags */ dev->flags = 0; return 0; } /* pt_probe() */ /* Open/initialise the board. This is called (in the current kernel) * sometime after booting when the 'ifconfig' program is run. * * This routine should set everything up anew at each open, even * registers that 'should' only be set once at boot, so that there is * a non-reboot way to recover if something goes wrong. * derived from last half of tsync_attach() */ static int pt_open(struct device *dev) { unsigned long flags; struct pt_local *lp = dev->priv; static first_time = 1; if (dev->base_addr & CHANA) { if (first_time) { if (request_dma(dev->dma, "pt")) { free_irq(dev->irq, dev); return -EAGAIN; } } /* Reset hardware */ chipset_init(dev); } lp->tstate = IDLE; if (dev->base_addr & CHANA) { scc_init(dev); scc_init(dev->next); } /* Save a copy of register RR0 for comparing with later on */ /* We always put 0 in zero count */ lp->saved_RR0 = rdscc(lp->cardbase, lp->base + CTL, R0) & ~ZCOUNT; /* master interrupt enable */ save_flags(flags); cli(); wrtscc(lp->cardbase, lp->base + CTL, R9, MIE | NV); outb_p( pt_sercfg |= PT_EI, lp->cardbase + INT_CFG); restore_flags(flags); lp->open_time = jiffies; dev->tbusy = 0; dev->interrupt = 0; dev->start = 1; first_time = 0; MOD_INC_USE_COUNT; return 0; } /* pt_open() */ static int pt_send_packet(struct sk_buff *skb, struct device *dev) { struct pt_local *lp = (struct pt_local *) dev->priv; #ifdef PT_DEBUG printk(KERN_DEBUG "PT: pt_send_packet(): (%d)\n", lp->base & CHANA); #endif hardware_send_packet(lp, skb); dev->trans_start = jiffies; return 0; } /* The inverse routine to pt_open() */ static int pt_close(struct device *dev) { unsigned long flags; struct pt_local *lp = dev->priv; struct sk_buff *ptr = NULL; int cmd; cmd = lp->base + CTL; save_flags(flags); cli(); /* Reset SCC or channel */ chipset_init(dev); disable_dma(lp->dmachan); lp->open_time = 0; dev->tbusy = 1; dev->start = 0; /* Free any buffers left in the hardware transmit queue */ while ((ptr = skb_dequeue(&lp->sndq)) != NULL) kfree_skb(ptr); restore_flags(flags); #ifdef PT_DEBUG printk(KERN_DEBUG "PT: pt_close(): Closing down channel (%d).\n", lp->base & CHANA); #endif MOD_DEC_USE_COUNT; return 0; } /* pt_close() */ static int pt_ioctl(struct device *dev, struct ifreq *ifr, int cmd) { unsigned long flags; struct pt_req rq; struct pt_local *lp = (struct pt_local *) dev->priv; int ret = verify_area(VERIFY_WRITE, ifr->ifr_data, sizeof(struct pt_req)); if (ret) return ret; if (cmd != SIOCDEVPRIVATE) return -EINVAL; copy_from_user(&rq, ifr->ifr_data, sizeof(struct pt_req)); switch (rq.cmd) { case SIOCSPIPARAM: if (!suser()) return -EPERM; save_flags(flags); cli(); lp->txdelay = rq.txdelay; lp->persist = rq.persist; lp->slotime = rq.slotime; lp->squeldelay = rq.squeldelay; lp->clockmode = rq.clockmode; lp->speed = rq.speed; pt_open(&pt0a); restore_flags(flags); ret = 0; break; case SIOCSPIDMA: if (!suser()) return -EPERM; ret = 0; if (dev->base_addr & CHANA) { /* if A channel */ if (rq.dmachan < 1 || rq.dmachan > 3) return -EINVAL; save_flags(flags); cli(); pt_close(dev); free_dma(lp->dmachan); dev->dma = lp->dmachan = rq.dmachan; if (request_dma(lp->dmachan,"pt")) ret = -EAGAIN; pt_open(dev); restore_flags(flags); } break; case SIOCSPIIRQ: ret = -EINVAL; /* add this later */ break; case SIOCGPIPARAM: case SIOCGPIDMA: case SIOCGPIIRQ: rq.speed = lp->speed; rq.txdelay = lp->txdelay; rq.persist = lp->persist; rq.slotime = lp->slotime; rq.squeldelay = lp->squeldelay; rq.clockmode = lp->clockmode; rq.dmachan = lp->dmachan; rq.irq = dev->irq; copy_to_user(ifr->ifr_data, &rq, sizeof(struct pt_req)); ret = 0; break; default: ret = -EINVAL; } return ret; } /* * Get the current statistics. * This may be called with the card open or closed. */ static struct net_device_stats *pt_get_stats(struct device *dev) { struct pt_local *lp = (struct pt_local *) dev->priv; return &lp->stats; } /* * Local variables: * compile-command: "gcc -D__KERNEL__ -I/usr/src/linux/net/inet -Wall -Wstrict-prototypes -O6 -m486 -c skeleton.c" * version-control: t * kept-new-versions: 5 * tab-width: 4 * End: */ static void tdelay(struct pt_local *lp, int time) { /* For some reason, we turn off the Tx interrupts here! */ if (!lp->dmachan) wrtscc(lp->cardbase, lp->base + CTL, R1, INT_ALL_Rx | EXT_INT_ENAB); if (lp->base & CHANA) { outb_p(time & 0xff, lp->cardbase + TMR1); outb_p((time >> 8)&0xff, lp->cardbase + TMR1); } else { outb_p(time & 0xff, lp->cardbase + TMR2); outb_p((time >> 8)&0xff, lp->cardbase + TMR2); } } /* tdelay */ static void pt_txisr(struct pt_local *lp) { unsigned long flags; int cmd; unsigned char c; save_flags(flags); cli(); cmd = lp->base + CTL; #ifdef PT_DEBUG printk(KERN_DEBUG "PT: pt_txisr(): tstate = %d (%d).\n", lp->tstate, lp->base & CHANA); #endif switch (lp->tstate) { case CRCOUT: lp->tstate = FLAGOUT; tdelay(lp, lp->squeldelay); restore_flags(flags); return; case IDLE: /* Transmitter idle. Find a frame for transmission */ if ((lp->sndbuf = skb_dequeue(&lp->sndq)) == NULL) { /* Nothing to send - return to receive mode * Tx off now - flag should have gone */ pt_rts(lp, OFF); restore_flags(flags); return; } if (!lp->dmachan) { lp->txptr = lp->sndbuf->data; lp->txptr++; /* Ignore KISS control byte */ lp->txcnt = (int) lp->sndbuf->len - 1; } /* If a buffer to send, drop though here */ case DEFER: /* Check DCD - debounce it */ /* See Intel Microcommunications Handbook p2-308 */ wrtscc(lp->cardbase, cmd, R0, RES_EXT_INT); wrtscc(lp->cardbase, cmd, R0, RES_EXT_INT); if ((rdscc(lp->cardbase, cmd, R0) & DCD) != 0) { lp->tstate = DEFER; tdelay(lp, 100); /* DEFER until DCD transition or timeout */ wrtscc(lp->cardbase, cmd, R15, DCDIE); restore_flags(flags); return; } if (random() > lp->persist) { lp->tstate = DEFER; tdelay(lp, lp->slotime); restore_flags(flags); return; } pt_rts(lp, ON); /* Tx on */ if (lp->dmachan) wrtscc(lp->cardbase, cmd, R5, TxCRC_ENAB | RTS | Tx8); lp->tstate = ST_TXDELAY; tdelay(lp, lp->txdelay); restore_flags(flags); return; case ACTIVE: /* Here we are actively sending a frame */ if (lp->txcnt--) { /* XLZ - checkout Gracilis PT code to see if the while * loop is better or not. */ c = *lp->txptr++; /* next char is gone */ wrtscc(lp->cardbase, cmd, R8, c); /* stuffing a char satisfies interrupt condition */ } else { /* No more to send */ kfree_skb(lp->sndbuf); lp->sndbuf = NULL; if ((rdscc(lp->cardbase, cmd, R0) & TxEOM)) { /* Did we underrun */ lp->stats.tx_errors++; lp->stats.tx_fifo_errors++; wrtscc(lp->cardbase, cmd, R0, SEND_ABORT); lp->tstate = FLAGOUT; tdelay(lp, lp->squeldelay); restore_flags(flags); return; } lp->tstate = UNDERRUN; /* Send flags on underrun */ if (lp->nrzi) { wrtscc(lp->cardbase, cmd, R10, CRCPS | NRZI); } else { wrtscc(lp->cardbase, cmd, R10, CRCPS | NRZ); } /* Reset Tx interrupt pending */ wrtscc(lp->cardbase, cmd, R0, RES_Tx_P); } restore_flags(flags); return; default: printk(KERN_ERR "PT: pt_txisr(): Invalid tstate (%d) for chan %s.\n", lp->tstate, (cmd & CHANA? "A": "B") ); pt_rts(lp, OFF); lp->tstate = IDLE; break; } /*switch */ restore_flags(flags); } static void pt_rxisr(struct device *dev) { struct pt_local *lp = (struct pt_local*) dev->priv; int cmd = lp->base + CTL; int bytecount; unsigned long flags; char rse; struct sk_buff *skb; int sksize, pkt_len; struct mbuf *cur_buf = NULL; unsigned char *cfix; save_flags(flags); cli(); /* Get status byte from R1 */ rse = rdscc(lp->cardbase, cmd, R1); #ifdef PT_DEBUG printk(KERN_DEBUG "PT: pt_rxisr(): R1 = %#3x. (%d)\n", rse, lp->base & CHANA); #endif if (lp->dmachan && (rse & Rx_OVR)) lp->rstate = RXERROR; if (rdscc(lp->cardbase, cmd, R0) & Rx_CH_AV && !lp->dmachan) { /* There is a char to be stored * Read special condition bits before reading the data char */ if (rse & Rx_OVR) { /* Rx overrun - toss buffer */ /* wind back the pointers */ lp->rcp = lp->rcvbuf->data; lp->rcvbuf->cnt = 0; lp->rstate = RXERROR; lp->stats.rx_errors++; lp->stats.rx_fifo_errors++; } else if (lp->rcvbuf->cnt >= lp->bufsiz) { /* Too large packet * wind back Rx buffer pointers */ lp->rcp = lp->rcvbuf->data; lp->rcvbuf->cnt = 0; lp->rstate = TOOBIG; } /* ok, we can store the Rx char if no errors */ if (lp->rstate == ACTIVE) { *lp->rcp++ = rdscc(lp->cardbase, cmd, R8); lp->rcvbuf->cnt++; } else { /* we got an error, dump the FIFO */ (void) rdscc(lp->cardbase, cmd, R8); (void) rdscc(lp->cardbase, cmd, R8); (void) rdscc(lp->cardbase, cmd, R8); /* Reset error latch */ wrtscc(lp->cardbase, cmd, R0, ERR_RES); lp->rstate = ACTIVE; /* Resync the SCC */ wrtscc(lp->cardbase, cmd, R3, RxENABLE | ENT_HM | AUTO_ENAB | Rx8); } } if (rse & END_FR) { #ifdef PT_DEBUG printk(KERN_DEBUG "PT: pt_rxisr() Got end of a %u byte frame.\n", lp->rcvbuf->cnt); #endif if (lp->dmachan) { clear_dma_ff(lp->dmachan); bytecount = lp->bufsiz - get_dma_residue(lp->dmachan); } else { bytecount = lp->rcvbuf->cnt; } /* END OF FRAME - Make sure Rx was active */ if (lp->rcvbuf->cnt > 0 || lp->dmachan) { if ((rse & CRC_ERR) || (lp->rstate > ACTIVE) || (bytecount < 10)) { if ((bytecount >= 10) && (rse & CRC_ERR)) { lp->stats.rx_crc_errors++; } if (lp->dmachan) { if (lp->rstate == RXERROR) { lp->stats.rx_errors++; lp->stats.rx_over_errors++; } lp->rstate = ACTIVE; setup_rx_dma(lp); } else { /* wind back Rx buffer pointers */ lp->rcp = lp->rcvbuf->data; lp->rcvbuf->cnt = 0; /* Re-sync the SCC */ wrtscc(lp->cardbase, cmd, R3, RxENABLE | ENT_HM | AUTO_ENAB | Rx8); } #ifdef PT_DEBUG printk(KERN_DEBUG "PT: pt_rxisr() %s error.\n", (rse & CRC_ERR)? "CRC" : "state"); #endif } else { /* We have a valid frame */ if (lp->dmachan) { pkt_len = lp->rcvbuf->cnt = bytecount - 2 +1; /* Get buffer for next frame */ cur_buf = lp->rcvbuf; switchbuffers(lp); setup_rx_dma(lp); } else { pkt_len = lp->rcvbuf->cnt -= 2; /* Toss 2 CRC bytes */ pkt_len += 1; /* make room for KISS control byte */ } /* Malloc up new buffer */ sksize = pkt_len; skb = dev_alloc_skb(sksize); if (skb == NULL) { printk(KERN_ERR "PT: %s: Memory squeeze, dropping packet.\n", dev->name); lp->stats.rx_dropped++; restore_flags(flags); return; } skb->dev = dev; /* KISS kludge = prefix with a 0 byte */ cfix=skb_put(skb,pkt_len); *cfix++=0; /* skb->data points to the start of sk_buff area */ if (lp->dmachan) memcpy(cfix, (char*)cur_buf->data, pkt_len - 1); else memcpy(cfix, lp->rcvbuf->data, pkt_len - 1); skb->protocol = ntohs(ETH_P_AX25); skb->mac.raw=skb->data; lp->stats.rx_bytes+=skb->len; netif_rx(skb); lp->stats.rx_packets++; if (!lp->dmachan) { /* packet queued - wind back buffer for next frame */ lp->rcp = lp->rcvbuf->data; lp->rcvbuf->cnt = 0; } } /* good frame */ } /* check active Rx */ /* Clear error status */ lp->rstate = ACTIVE; /* Reset error latch */ } /* end EOF check */ wrtscc(lp->cardbase, cmd, R0, ERR_RES); restore_flags(flags); } /* pt_rxisr() */ /* * This handles the two timer interrupts. * This is a real bugger, cause you have to rip it out of the pi's * external status code. They use the CTS line or something. */ static void pt_tmrisr(struct pt_local *lp) { unsigned long flags; #ifdef PT_DEBUG printk(KERN_DEBUG "PT: pt_tmrisr(): tstate = %d (%d).\n", lp->tstate, lp->base & CHANA); #endif save_flags(flags); cli(); switch (lp->tstate) { /* Most of this stuff is in pt_exisr() */ case FLAGOUT: case ST_TXDELAY: case DEFER: /* case ACTIVE: case UNDERRUN:*/ pt_exisr(lp); break; default: if (lp->base & CHANA) printk(KERN_ERR "PT: pt_tmrisr(): Invalid tstate %d for Channel A\n", lp->tstate); else printk(KERN_ERR "PT: pt_tmrisr(): Invalid tstate %d for Channel B\n", lp->tstate); break; } /* end switch */ restore_flags(flags); } /* pt_tmrisr() */ /* * This routine is called by the kernel when there is an interrupt for the * PT. */ static void pt_interrupt(int irq, void *dev_id, struct pt_regs *regs) { /* It's a tad dodgy here, but we assume pt0a until proven otherwise */ struct device *dev = &pt0a; struct pt_local *lp = dev->priv; unsigned char intreg; unsigned char st; register int cbase = dev->base_addr & 0x3f0; unsigned long flags; /* Read the PT's interrupt register, this is not the SCC one! */ intreg = inb_p(cbase + INT_REG); while(( intreg & 0x07) != 0x07) { /* Read interrupt register pending from Channel A */ while ((st = rdscc(cbase, cbase + CHANA + CTL, R3)) != 0) { /* Read interrupt vector from R2, channel B */ #ifdef PT_DEBUG printk(KERN_DEBUG "PT: pt_interrupt(): R3 = %#3x", st); #endif /* st = rdscc(lp->cardbase, cbase + CHANB + CTL, R2) & 0x0e;*/ #ifdef PT_DEBUG printk(KERN_DEBUG "PI: R2 = %#3x.\n", st); #endif if (st & CHARxIP) { /* Channel A Rx */ lp = (struct pt_local*)pt0a.priv; pt_rxisr(&pt0a); } else if (st & CHATxIP) { /* Channel A Tx */ lp = (struct pt_local*)pt0a.priv; pt_txisr(lp); } else if (st & CHAEXT) { /* Channel A External Status */ lp = (struct pt_local*)pt0a.priv; pt_exisr(lp); } else if (st & CHBRxIP) { /* Channel B Rx */ lp= (struct pt_local*)pt0b.priv; pt_rxisr(&pt0b); } else if (st & CHBTxIP) { /* Channel B Tx */ lp = (struct pt_local*)pt0b.priv; pt_txisr(lp); } else if (st & CHBEXT) { /* Channel B External Status */ lp = (struct pt_local*)pt0b.priv; pt_exisr(lp); } /* Reset highest interrupt under service */ save_flags(flags); cli(); wrtscc(lp->cardbase, lp->base + CTL, R0, RES_H_IUS); restore_flags(flags); } /* end of SCC ints */ if (!(intreg & PT_TMR1_MSK)) { /* Clear timer 1 */ inb_p(cbase + TMR1CLR); pt_tmrisr( (struct pt_local*)pt0a.priv); } if (!(intreg & PT_TMR2_MSK)) { /* Clear timer 2 */ inb_p(cbase + TMR2CLR); pt_tmrisr( (struct pt_local*)pt0b.priv); } /* Get the next PT interrupt vector */ intreg = inb_p(cbase + INT_REG); } /* while (intreg) */ } /* pt_interrupt() */ static void pt_exisr(struct pt_local *lp) { unsigned long flags; int cmd = lp->base + CTL; unsigned char st; char c; int length; save_flags(flags); cli(); /* Get external status */ st = rdscc(lp->cardbase, cmd, R0); #ifdef PT_DEBUG printk(KERN_DEBUG "PT: exisr(): R0 = %#3x tstate = %d (%d).\n", st, lp->tstate, lp->base & CHANA); #endif /* Reset external status latch */ wrtscc(lp->cardbase, cmd, R0, RES_EXT_INT); if ((lp->rstate >= ACTIVE) && (st & BRK_ABRT) && lp->dmachan) { setup_rx_dma(lp); lp->rstate = ACTIVE; } switch (lp->tstate) { case ACTIVE: /* Unexpected underrun */ #ifdef PT_DEBUG printk(KERN_DEBUG "PT: exisr(): unexpected underrun detected.\n"); #endif kfree_skb(lp->sndbuf); lp->sndbuf = NULL; if (!lp->dmachan) { wrtscc(lp->cardbase, cmd, R0, SEND_ABORT); lp->stats.tx_errors++; lp->stats.tx_fifo_errors++; } lp->tstate = FLAGOUT; tdelay(lp, lp->squeldelay); restore_flags(flags); return; case UNDERRUN: lp->tstate = CRCOUT; restore_flags(flags); return; case FLAGOUT: /* squeldelay has timed out */ /* Find a frame for transmission */ if ((lp->sndbuf = skb_dequeue(&lp->sndq)) == NULL) { /* Nothing to send - return to Rx mode */ pt_rts(lp, OFF); lp->tstate = IDLE; restore_flags(flags); return; } if (!lp->dmachan) { lp->txptr = lp->sndbuf->data; lp->txptr++; /* Ignore KISS control byte */ lp->txcnt = (int) lp->sndbuf->len - 1; } /* Fall through if we have a packet */ case ST_TXDELAY: if (lp->dmachan) { /* Disable DMA chan */ disable_dma(lp->dmachan); /* Set up for TX dma */ wrtscc(lp->cardbase, cmd, R1, WT_FN_RDYFN | EXT_INT_ENAB); length = lp->sndbuf->len - 1; memcpy(lp->txdmabuf, &lp->sndbuf->data[1], length); /* Setup DMA controller for Tx */ setup_tx_dma(lp, length); enable_dma(lp->dmachan); /* Reset CRC, Txint pending */ wrtscc(lp->cardbase, cmd, R0, RES_Tx_CRC | RES_Tx_P); /* Allow underrun only */ wrtscc(lp->cardbase, cmd, R15, TxUIE); /* Enable TX DMA */ wrtscc(lp->cardbase, cmd, R1, WT_RDY_ENAB | WT_FN_RDYFN | EXT_INT_ENAB); /* Send CRC on underrun */ wrtscc(lp->cardbase, cmd, R0, RES_EOM_L); lp->tstate = ACTIVE; break; } /* Get first char to send */ lp->txcnt--; c = *lp->txptr++; /* Reset CRC for next frame */ wrtscc(lp->cardbase, cmd, R0, RES_Tx_CRC); /* send abort on underrun */ if (lp->nrzi) { wrtscc(lp->cardbase, cmd, R10, CRCPS | NRZI | ABUNDER); } else { wrtscc(lp->cardbase, cmd, R10, CRCPS | NRZ | ABUNDER); } /* send first char */ wrtscc(lp->cardbase, cmd, R8, c); /* Reset end of message latch */ wrtscc(lp->cardbase, cmd, R0, RES_EOM_L); /* stuff an extra one in */ /* while ((rdscc(lp->cardbase, cmd, R0) & Tx_BUF_EMP) && lp->txcnt) { lp->txcnt--; c = *lp->txptr++; wrtscc(lp->cardbase, cmd, R8, c); }*/ /* select Tx interrupts to enable */ /* Allow underrun int only */ wrtscc(lp->cardbase, cmd, R15, TxUIE); /* Reset external interrupts */ wrtscc(lp->cardbase, cmd, R0, RES_EXT_INT); /* Tx and Rx ints enabled */ wrtscc(lp->cardbase, cmd, R1, TxINT_ENAB | EXT_INT_ENAB); lp->tstate = ACTIVE; restore_flags(flags); return; /* slotime has timed out */ case DEFER: /* Check DCD - debounce it * see Intel Microcommunications Handbook, p2-308 */ wrtscc(lp->cardbase, cmd, R0, RES_EXT_INT); wrtscc(lp->cardbase, cmd, R0, RES_EXT_INT); if ((rdscc(lp->cardbase, cmd, R0) & DCD) != 0) { lp->tstate = DEFER; tdelay(lp, 100); /* DEFER until DCD transition or timeout */ wrtscc(lp->cardbase, cmd, R15, DCDIE); restore_flags(flags); return; } if (random() > lp->persist) { lp->tstate = DEFER; tdelay(lp, lp->slotime); restore_flags(flags); return; } if (lp->dmachan) wrtscc(lp->cardbase, cmd, R5, TxCRC_ENAB | RTS | Tx8); pt_rts(lp, ON); /* Tx on */ lp->tstate = ST_TXDELAY; tdelay(lp, lp->txdelay); restore_flags(flags); return; /* Only for int driven parts */ if (lp->dmachan) { restore_flags(flags); return; } } /* end switch */ /* * Rx mode only * This triggers when hunt mode is entered, & since an ABORT * automatically enters hunt mode, we use that to clean up * any waiting garbage */ if ((lp->rstate == ACTIVE) && (st & BRK_ABRT) ) { #ifdef PT_DEBUG printk(KERN_DEBUG "PT: exisr(): abort detected.\n"); #endif /* read and dump all of SCC Rx FIFO */ (void) rdscc(lp->cardbase, cmd, R8); (void) rdscc(lp->cardbase, cmd, R8); (void) rdscc(lp->cardbase, cmd, R8); lp->rcp = lp->rcvbuf->data; lp->rcvbuf->cnt = 0; /* Re-sync the SCC */ wrtscc(lp->cardbase, cmd, R3, RxENABLE | ENT_HM | AUTO_ENAB | Rx8); } /* Check for DCD transitions */ if ( (st & DCD) != (lp->saved_RR0 & DCD)) { #ifdef PT_DEBUG printk(KERN_DEBUG "PT: pt_exisr(): DCD is now %s.\n", (st & DCD)? "ON" : "OFF" ); #endif if (st & DCD) { /* Check that we don't already have some data */ if (lp->rcvbuf->cnt > 0) { #ifdef PT_DEBUG printk(KERN_DEBUG "PT: pt_exisr() dumping %u bytes from buffer.\n", lp->rcvbuf->cnt); #endif /* wind back buffers */ lp->rcp = lp->rcvbuf->data; lp->rcvbuf->cnt = 0; } } else { /* DCD off */ /* read and dump al SCC FIFO */ (void)rdscc(lp->cardbase, cmd, R8); (void)rdscc(lp->cardbase, cmd, R8); (void)rdscc(lp->cardbase, cmd, R8); /* wind back buffers */ lp->rcp = lp->rcvbuf->data; lp->rcvbuf->cnt = 0; /* Re-sync the SCC */ wrtscc(lp->cardbase, cmd, R3, RxENABLE | ENT_HM | AUTO_ENAB | Rx8); } } /* Update the saved version of register RR) */ lp->saved_RR0 = st &~ ZCOUNT; restore_flags(flags); } /* pt_exisr() */ #ifdef MODULE EXPORT_NO_SYMBOLS; MODULE_AUTHOR("Craig Small VK2XLZ "); MODULE_DESCRIPTION("AX.25 driver for the Gracillis PacketTwin HDLC card"); int init_module(void) { return pt_init(); } void cleanup_module(void) { free_irq(pt0a.irq, &pt0a); /* IRQs and IO Ports are shared */ release_region(pt0a.base_addr & 0x3f0, PT_TOTAL_SIZE); kfree(pt0a.priv); pt0a.priv = NULL; unregister_netdev(&pt0a); kfree(pt0b.priv); pt0b.priv = NULL; unregister_netdev(&pt0b); } #endif