/********************************************************************* * * Filename: smc-ircc.c * Version: 0.4 * Description: Driver for the SMC Infrared Communications Controller * Status: Experimental. * Author: Thomas Davis (tadavis@jps.net) * Created at: * Modified at: Tue Feb 22 10:05:06 2000 * Modified by: Dag Brattli * * Copyright (c) 1999-2000 Dag Brattli * Copyright (c) 1998-1999 Thomas Davis, * All Rights Reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA * * SIO's: SMC FDC37N869, FDC37C669, FDC37N958 * Applicable Models : Fujitsu Lifebook 635t, Sony PCG-505TX * ********************************************************************/ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include static char *driver_name = "smc-ircc"; #define CHIP_IO_EXTENT 8 static unsigned int io[] = { ~0, ~0 }; static unsigned int io2[] = { 0, 0 }; static struct ircc_cb *dev_self[] = { NULL, NULL}; /* Some prototypes */ static int ircc_open(int i, unsigned int iobase, unsigned int board_addr); #ifdef MODULE static int ircc_close(struct ircc_cb *self); #endif /* MODULE */ static int ircc_probe(int iobase, int board_addr); static int ircc_probe_58(smc_chip_t *chip, chipio_t *info); static int ircc_probe_69(smc_chip_t *chip, chipio_t *info); static int ircc_dma_receive(struct ircc_cb *self, int iobase); static void ircc_dma_receive_complete(struct ircc_cb *self, int iobase); static int ircc_hard_xmit(struct sk_buff *skb, struct net_device *dev); static void ircc_dma_xmit(struct ircc_cb *self, int iobase, int bofs); static void ircc_change_speed(void *priv, __u32 speed); static void ircc_interrupt(int irq, void *dev_id, struct pt_regs *regs); #if 0 /* unused */ static int ircc_is_receiving(struct ircc_cb *self); #endif /* unused */ static int ircc_net_open(struct net_device *dev); static int ircc_net_close(struct net_device *dev); static int ircc_pmproc(struct pm_dev *dev, pm_request_t rqst, void *data); /* These are the currently known SMC chipsets */ static smc_chip_t chips[] = { { "FDC37C669", 0x55, 0x55, 0x0d, 0x04, ircc_probe_69 }, { "FDC37N869", 0x55, 0x00, 0x0d, 0x29, ircc_probe_69 }, { "FDC37N958", 0x55, 0x55, 0x20, 0x09, ircc_probe_58 }, { NULL } }; static int ircc_irq=255; static int ircc_dma=255; static inline void register_bank(int iobase, int bank) { outb(((inb(iobase+IRCC_MASTER) & 0xf0) | (bank & 0x07)), iobase+IRCC_MASTER); } /* * Function ircc_init () * * Initialize chip. Just try to find out how many chips we are dealing with * and where they are */ int __init ircc_init(void) { static int smcreg[] = { 0x3f0, 0x370 }; smc_chip_t *chip; chipio_t info; int ret = -ENODEV; int i; IRDA_DEBUG(0, __FUNCTION__ "\n"); /* Probe for all the NSC chipsets we know about */ for (chip=chips; chip->name ; chip++,i++) { for (i=0; i<2; i++) { info.cfg_base = smcreg[i]; /* * First we check if the user has supplied any * parameters which we should use instead of probed * values */ if (io[i] < 2000) { info.fir_base = io[i]; info.sir_base = io2[i]; } else if (chip->probe(chip, &info) < 0) continue; if (check_region(info.fir_base, CHIP_IO_EXTENT) < 0) continue; if (check_region(info.sir_base, CHIP_IO_EXTENT) < 0) continue; if (ircc_open(i, info.fir_base, info.sir_base) == 0) ret = 0; } } return ret; } /* * Function ircc_cleanup () * * Close all configured chips * */ #ifdef MODULE static void ircc_cleanup(void) { int i; IRDA_DEBUG(0, __FUNCTION__ "\n"); for (i=0; i < 2; i++) { if (dev_self[i]) ircc_close(dev_self[i]); } } #endif /* MODULE */ /* * Function ircc_open (iobase, irq) * * Open driver instance * */ static int ircc_open(int i, unsigned int fir_base, unsigned int sir_base) { struct ircc_cb *self; struct irport_cb *irport; int config; int ret; IRDA_DEBUG(0, __FUNCTION__ "\n"); if ((config = ircc_probe(fir_base, sir_base)) == -1) { IRDA_DEBUG(0, __FUNCTION__ "(), addr 0x%04x - no device found!\n", fir_base); return -1; } /* * Allocate new instance of the driver */ self = kmalloc(sizeof(struct ircc_cb), GFP_KERNEL); if (self == NULL) { ERROR("%s, Can't allocate memory for control block!\n", driver_name); return -ENOMEM; } memset(self, 0, sizeof(struct ircc_cb)); spin_lock_init(&self->lock); /* Need to store self somewhere */ dev_self[i] = self; irport = irport_open(i, sir_base, config >> 4 & 0x0f); if (!irport) return -ENODEV; /* Steal the network device from irport */ self->netdev = irport->netdev; self->irport = irport; irport->priv = self; /* Initialize IO */ self->io.fir_base = fir_base; self->io.sir_base = sir_base; /* Used by irport */ self->io.irq = config >> 4 & 0x0f; if (ircc_irq < 255) { MESSAGE("%s, Overriding IRQ - chip says %d, using %d\n", driver_name, self->io.irq, ircc_irq); self->io.irq = ircc_irq; } self->io.fir_ext = CHIP_IO_EXTENT; self->io.sir_ext = 8; /* Used by irport */ self->io.dma = config & 0x0f; if (ircc_dma < 255) { MESSAGE("%s, Overriding DMA - chip says %d, using %d\n", driver_name, self->io.dma, ircc_dma); self->io.dma = ircc_dma; } /* Lock the port that we need */ ret = check_region(self->io.fir_base, self->io.fir_ext); if (ret < 0) { IRDA_DEBUG(0, __FUNCTION__ ": can't get fir_base of 0x%03x\n", self->io.fir_base); kfree(self); return -ENODEV; } request_region(self->io.fir_base, self->io.fir_ext, driver_name); /* Initialize QoS for this device */ irda_init_max_qos_capabilies(&irport->qos); /* The only value we must override it the baudrate */ irport->qos.baud_rate.bits = IR_9600|IR_19200|IR_38400|IR_57600| IR_115200|IR_576000|IR_1152000|(IR_4000000 << 8); irport->qos.min_turn_time.bits = 0x07; irda_qos_bits_to_value(&irport->qos); irport->flags = IFF_FIR|IFF_MIR|IFF_SIR|IFF_DMA|IFF_PIO; /* Max DMA buffer size needed = (data_size + 6) * (window_size) + 6; */ self->rx_buff.truesize = 4000; self->tx_buff.truesize = 4000; self->rx_buff.head = (__u8 *) kmalloc(self->rx_buff.truesize, GFP_KERNEL|GFP_DMA); if (self->rx_buff.head == NULL) return -ENOMEM; memset(self->rx_buff.head, 0, self->rx_buff.truesize); self->tx_buff.head = (__u8 *) kmalloc(self->tx_buff.truesize, GFP_KERNEL|GFP_DMA); if (self->tx_buff.head == NULL) { kfree(self->rx_buff.head); return -ENOMEM; } memset(self->tx_buff.head, 0, self->tx_buff.truesize); self->rx_buff.in_frame = FALSE; self->rx_buff.state = OUTSIDE_FRAME; self->tx_buff.data = self->tx_buff.head; self->rx_buff.data = self->rx_buff.head; /* Override the speed change function, since we must control it now */ irport->change_speed = &ircc_change_speed; irport->interrupt = &ircc_interrupt; self->netdev->open = &ircc_net_open; self->netdev->stop = &ircc_net_close; irport_start(self->irport); self->pmdev = pm_register(PM_SYS_DEV, PM_SYS_IRDA, ircc_pmproc); if (self->pmdev) self->pmdev->data = self; return 0; } /* * Function ircc_close (self) * * Close driver instance * */ #ifdef MODULE static int ircc_close(struct ircc_cb *self) { int iobase; IRDA_DEBUG(0, __FUNCTION__ "\n"); ASSERT(self != NULL, return -1;); iobase = self->io.fir_base; irport_close(self->irport); /* Stop interrupts */ register_bank(iobase, 0); outb(0, iobase+IRCC_IER); outb(IRCC_MASTER_RESET, iobase+IRCC_MASTER); outb(0x00, iobase+IRCC_MASTER); #if 0 /* Reset to SIR mode */ register_bank(iobase, 1); outb(IRCC_CFGA_IRDA_SIR_A|IRCC_CFGA_TX_POLARITY, iobase+IRCC_SCE_CFGA); outb(IRCC_CFGB_IR, iobase+IRCC_SCE_CFGB); #endif /* Release the PORT that this driver is using */ IRDA_DEBUG(0, __FUNCTION__ "(), releasing 0x%03x\n", self->io.fir_base); release_region(self->io.fir_base, self->io.fir_ext); if (self->tx_buff.head) kfree(self->tx_buff.head); if (self->rx_buff.head) kfree(self->rx_buff.head); kfree(self); return 0; } #endif /* MODULE */ /* * Function ircc_probe_69 (chip, info) * * Probes for the SMC FDC37C669 and FDC37N869 * */ static int ircc_probe_69(smc_chip_t *chip, chipio_t *info) { int cfg_base = info->cfg_base; __u8 devid, mode; int ret = -ENODEV; int fir_io; IRDA_DEBUG(0, __FUNCTION__ "()\n"); /* Enter configuration */ outb(chip->entr1, cfg_base); outb(chip->entr2, cfg_base); outb(chip->cid_index, cfg_base); devid = inb(cfg_base+1); IRDA_DEBUG(0, __FUNCTION__ "(), devid=0x%02x\n",devid); /* Check for expected device ID; are there others? */ if (devid == chip->cid_value) { outb(0x0c, cfg_base); mode = inb(cfg_base+1); mode = (mode & 0x38) >> 3; /* Value for IR port */ if (mode && mode < 4) { /* SIR iobase */ outb(0x25, cfg_base); info->sir_base = inb(cfg_base+1) << 2; /* FIR iobase */ outb(0x2b, cfg_base); fir_io = inb(cfg_base+1) << 3; if (fir_io) { ret = 0; info->fir_base = fir_io; } } } /* Exit configuration */ outb(0xaa, cfg_base); return ret; } /* * Function ircc_probe_58 (chip, info) * * Probes for the SMC FDC37N958 * */ static int ircc_probe_58(smc_chip_t *chip, chipio_t *info) { int cfg_base = info->cfg_base; __u8 devid; int ret = -ENODEV; int fir_io; IRDA_DEBUG(0, __FUNCTION__ "()\n"); /* Enter configuration */ outb(chip->entr1, cfg_base); outb(chip->entr2, cfg_base); outb(chip->cid_index, cfg_base); devid = inb(cfg_base+1); IRDA_DEBUG(0, __FUNCTION__ "(), devid=0x%02x\n",devid); /* Check for expected device ID; are there others? */ if (devid == chip->cid_value) { /* Select logical device (UART2) */ outb(0x07, cfg_base); outb(0x05, cfg_base + 1); /* SIR iobase */ outb(0x60, cfg_base); info->sir_base = inb(cfg_base + 1) << 8; outb(0x61, cfg_base); info->sir_base |= inb(cfg_base + 1); /* Read FIR base */ outb(0x62, cfg_base); fir_io = inb(cfg_base + 1) << 8; outb(0x63, cfg_base); fir_io |= inb(cfg_base + 1); outb(0x2b, cfg_base); if (fir_io) { ret = 0; info->fir_base = fir_io; } } /* Exit configuration */ outb(0xaa, cfg_base); return ret; } /* * Function ircc_probe (iobase, board_addr, irq, dma) * * Returns non-negative on success. * */ static int ircc_probe(int fir_base, int sir_base) { int low, high, chip, config, dma, irq; int iobase = fir_base; int version = 1; IRDA_DEBUG(0, __FUNCTION__ "\n"); register_bank(iobase, 3); high = inb(iobase+IRCC_ID_HIGH); low = inb(iobase+IRCC_ID_LOW); chip = inb(iobase+IRCC_CHIP_ID); version = inb(iobase+IRCC_VERSION); config = inb(iobase+IRCC_INTERFACE); irq = config >> 4 & 0x0f; dma = config & 0x0f; if (high == 0x10 && low == 0xb8 && (chip == 0xf1 || chip == 0xf2)) { MESSAGE("SMC IrDA Controller found; IrCC version %d.%d, " "port 0x%03x, dma=%d, irq=%d\n", chip & 0x0f, version, iobase, dma, irq); } else return -ENODEV; /* Power on device */ outb(0x00, iobase+IRCC_MASTER); return config; } /* * Function ircc_change_speed (self, baud) * * Change the speed of the device * */ static void ircc_change_speed(void *priv, __u32 speed) { int iobase, ir_mode, ctrl, fast; struct ircc_cb *self = (struct ircc_cb *) priv; struct net_device *dev; IRDA_DEBUG(0, __FUNCTION__ "\n"); ASSERT(self != NULL, return;); dev = self->netdev; iobase = self->io.fir_base; /* Update accounting for new speed */ self->io.speed = speed; outb(IRCC_MASTER_RESET, iobase+IRCC_MASTER); outb(0x00, iobase+IRCC_MASTER); switch (speed) { case 9600: case 19200: case 38400: case 57600: case 115200: ir_mode = IRCC_CFGA_IRDA_SIR_A; ctrl = 0; fast = 0; break; case 576000: ir_mode = IRCC_CFGA_IRDA_HDLC; ctrl = IRCC_CRC; fast = 0; IRDA_DEBUG(0, __FUNCTION__ "(), handling baud of 576000\n"); break; case 1152000: ir_mode = IRCC_CFGA_IRDA_HDLC; ctrl = IRCC_1152 | IRCC_CRC; fast = 0; IRDA_DEBUG(0, __FUNCTION__ "(), handling baud of 1152000\n"); break; case 4000000: ir_mode = IRCC_CFGA_IRDA_4PPM; ctrl = IRCC_CRC; fast = IRCC_LCR_A_FAST; IRDA_DEBUG(0, __FUNCTION__ "(), handling baud of 4000000\n"); break; default: IRDA_DEBUG(0, __FUNCTION__ "(), unknown baud rate of %d\n", speed); return; } register_bank(iobase, 0); outb(0, iobase+IRCC_IER); outb(IRCC_MASTER_INT_EN, iobase+IRCC_MASTER); /* Make special FIR init if necessary */ if (speed > 115200) { irport_stop(self->irport); /* Install FIR transmit handler */ dev->hard_start_xmit = &ircc_hard_xmit; /* * Don't know why we have to do this, but FIR interrupts * stops working if we remove it. */ /* outb(UART_MCR_OUT2, self->io.sir_base + UART_MCR); */ /* Be ready for incomming frames */ ircc_dma_receive(self, iobase); } else { /* Install SIR transmit handler */ dev->hard_start_xmit = &irport_hard_xmit; irport_start(self->irport); IRDA_DEBUG(0, __FUNCTION__ "(), using irport to change speed to %d\n", speed); irport_change_speed(self->irport, speed); } register_bank(iobase, 1); outb(((inb(iobase+IRCC_SCE_CFGA) & 0x87) | ir_mode), iobase+IRCC_SCE_CFGA); #ifdef SMC_669 /* Uses pin 88/89 for Rx/Tx */ outb(((inb(iobase+IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_COM), iobase+IRCC_SCE_CFGB); #else outb(((inb(iobase+IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_IR), iobase+IRCC_SCE_CFGB); #endif (void) inb(iobase+IRCC_FIFO_THRESHOLD); outb(64, iobase+IRCC_FIFO_THRESHOLD); register_bank(iobase, 4); outb((inb(iobase+IRCC_CONTROL) & 0x30) | ctrl, iobase+IRCC_CONTROL); register_bank(iobase, 0); outb(fast, iobase+IRCC_LCR_A); } /* * Function ircc_hard_xmit (skb, dev) * * Transmit the frame! * */ static int ircc_hard_xmit(struct sk_buff *skb, struct net_device *dev) { struct irport_cb *irport; struct ircc_cb *self; unsigned long flags; __u32 speed; int iobase; int mtt; irport = (struct irport_cb *) dev->priv; self = (struct ircc_cb *) irport->priv; ASSERT(self != NULL, return 0;); iobase = self->io.fir_base; spin_lock_irqsave(&self->lock, flags); /* Check if we need to change the speed after this frame */ if ((speed = irda_get_speed(skb)) != self->io.speed) self->new_speed = speed; netif_stop_queue(dev); memcpy(self->tx_buff.head, skb->data, skb->len); self->tx_buff.len = skb->len; self->tx_buff.data = self->tx_buff.head; mtt = irda_get_mtt(skb); if (mtt) { int bofs; /* * Compute who many BOFS (STA or PA's) we need to waste the * min turn time given the speed of the link. */ bofs = mtt * (self->io.speed / 1000) / 8000; if (bofs > 4095) bofs = 4095; ircc_dma_xmit(self, iobase, bofs); } else { /* Transmit frame */ ircc_dma_xmit(self, iobase, 0); } spin_unlock_irqrestore(&self->lock, flags); dev_kfree_skb(skb); return 0; } /* * Function ircc_dma_xmit (self, iobase) * * Transmit data using DMA * */ static void ircc_dma_xmit(struct ircc_cb *self, int iobase, int bofs) { __u8 ctrl; IRDA_DEBUG(2, __FUNCTION__ "\n"); #if 0 /* Disable Rx */ register_bank(iobase, 0); outb(0x00, iobase+IRCC_LCR_B); #endif register_bank(iobase, 1); outb(inb(iobase+IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE, iobase+IRCC_SCE_CFGB); self->io.direction = IO_XMIT; /* Set BOF additional count for generating the min turn time */ register_bank(iobase, 4); outb(bofs & 0xff, iobase+IRCC_BOF_COUNT_LO); ctrl = inb(iobase+IRCC_CONTROL) & 0xf0; outb(ctrl | ((bofs >> 8) & 0x0f), iobase+IRCC_BOF_COUNT_HI); /* Set max Tx frame size */ outb(self->tx_buff.len >> 8, iobase+IRCC_TX_SIZE_HI); outb(self->tx_buff.len & 0xff, iobase+IRCC_TX_SIZE_LO); /* Setup DMA controller (must be done after enabling chip DMA) */ setup_dma(self->io.dma, self->tx_buff.data, self->tx_buff.len, DMA_TX_MODE); outb(UART_MCR_OUT2, self->io.sir_base + UART_MCR); /* Enable burst mode chip Tx DMA */ register_bank(iobase, 1); outb(inb(iobase+IRCC_SCE_CFGB) | IRCC_CFGB_DMA_ENABLE | IRCC_CFGB_DMA_BURST, iobase+IRCC_SCE_CFGB); /* Enable interrupt */ outb(IRCC_MASTER_INT_EN, iobase+IRCC_MASTER); register_bank(iobase, 0); outb(IRCC_IER_ACTIVE_FRAME | IRCC_IER_EOM, iobase+IRCC_IER); /* Enable transmit */ outb(IRCC_LCR_B_SCE_TRANSMIT|IRCC_LCR_B_SIP_ENABLE, iobase+IRCC_LCR_B); } /* * Function ircc_dma_xmit_complete (self) * * The transfer of a frame in finished. This function will only be called * by the interrupt handler * */ static void ircc_dma_xmit_complete(struct ircc_cb *self, int iobase) { IRDA_DEBUG(2, __FUNCTION__ "\n"); #if 0 /* Disable Tx */ register_bank(iobase, 0); outb(0x00, iobase+IRCC_LCR_B); #endif register_bank(self->io.fir_base, 1); outb(inb(self->io.fir_base+IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE, self->io.fir_base+IRCC_SCE_CFGB); /* Check for underrrun! */ register_bank(iobase, 0); if (inb(iobase+IRCC_LSR) & IRCC_LSR_UNDERRUN) { self->irport->stats.tx_errors++; self->irport->stats.tx_fifo_errors++; /* Reset error condition */ register_bank(iobase, 0); outb(IRCC_MASTER_ERROR_RESET, iobase+IRCC_MASTER); outb(0x00, iobase+IRCC_MASTER); } else { self->irport->stats.tx_packets++; self->irport->stats.tx_bytes += self->tx_buff.len; } /* Check if it's time to change the speed */ if (self->new_speed) { ircc_change_speed(self, self->new_speed); self->new_speed = 0; } netif_wake_queue(self->netdev); } /* * Function ircc_dma_receive (self) * * Get ready for receiving a frame. The device will initiate a DMA * if it starts to receive a frame. * */ static int ircc_dma_receive(struct ircc_cb *self, int iobase) { /* Turn off chip DMA */ //register_bank(iobase, 1); //outb(inb(iobase+IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE, // iobase+IRCC_SCE_CFGB); setup_dma(self->io.dma, self->rx_buff.data, self->rx_buff.truesize, DMA_RX_MODE); /* Set max Rx frame size */ register_bank(iobase, 4); outb((2050 >> 8) & 0x0f, iobase+IRCC_RX_SIZE_HI); outb(2050 & 0xff, iobase+IRCC_RX_SIZE_LO); self->io.direction = IO_RECV; self->rx_buff.data = self->rx_buff.head; /* Setup DMA controller */ /* Enable receiver */ register_bank(iobase, 0); outb(IRCC_LCR_B_SCE_RECEIVE | IRCC_LCR_B_SIP_ENABLE, iobase+IRCC_LCR_B); /* Enable burst mode chip Rx DMA */ register_bank(iobase, 1); outb(inb(iobase+IRCC_SCE_CFGB) | IRCC_CFGB_DMA_ENABLE | IRCC_CFGB_DMA_BURST, iobase+IRCC_SCE_CFGB); return 0; } /* * Function ircc_dma_receive_complete (self) * * Finished with receiving frames * * */ static void ircc_dma_receive_complete(struct ircc_cb *self, int iobase) { struct sk_buff *skb; int len, msgcnt; IRDA_DEBUG(2, __FUNCTION__ "\n"); #if 0 /* Disable Rx */ register_bank(iobase, 0); outb(0x00, iobase+IRCC_LCR_B); #endif register_bank(iobase, 0); msgcnt = inb(iobase+IRCC_LCR_B) & 0x08; IRDA_DEBUG(2, __FUNCTION__ ": dma count = %d\n", get_dma_residue(self->io.dma)); len = self->rx_buff.truesize - get_dma_residue(self->io.dma); /* Remove CRC */ if (self->io.speed < 4000000) len -= 2; else len -= 4; if ((len < 2) && (len > 2050)) { WARNING(__FUNCTION__ "(), bogus len=%d\n", len); return; } IRDA_DEBUG(2, __FUNCTION__ ": msgcnt = %d, len=%d\n", msgcnt, len); skb = dev_alloc_skb(len+1); if (!skb) { WARNING(__FUNCTION__ "(), memory squeeze, dropping frame.\n"); return; } /* Make sure IP header gets aligned */ skb_reserve(skb, 1); memcpy(skb_put(skb, len), self->rx_buff.data, len); self->irport->stats.rx_packets++; self->irport->stats.rx_bytes += len; skb->dev = self->netdev; skb->mac.raw = skb->data; skb->protocol = htons(ETH_P_IRDA); netif_rx(skb); } /* * Function ircc_interrupt (irq, dev_id, regs) * * An interrupt from the chip has arrived. Time to do some work * */ static void ircc_interrupt(int irq, void *dev_id, struct pt_regs *regs) { struct net_device *dev = (struct net_device *) dev_id; struct irport_cb *irport; struct ircc_cb *self; int iobase, iir; if (dev == NULL) { printk(KERN_WARNING "%s: irq %d for unknown device.\n", driver_name, irq); return; } irport = (struct irport_cb *) dev->priv; ASSERT(irport != NULL, return;); self = (struct ircc_cb *) irport->priv; ASSERT(self != NULL, return;); /* Check if we should use the SIR interrupt handler */ if (self->io.speed < 576000) { irport_interrupt(irq, dev_id, regs); return; } iobase = self->io.fir_base; spin_lock(&self->lock); register_bank(iobase, 0); iir = inb(iobase+IRCC_IIR); /* Disable interrupts */ outb(0, iobase+IRCC_IER); IRDA_DEBUG(2, __FUNCTION__ "(), iir = 0x%02x\n", iir); if (iir & IRCC_IIR_EOM) { if (self->io.direction == IO_RECV) ircc_dma_receive_complete(self, iobase); else ircc_dma_xmit_complete(self, iobase); ircc_dma_receive(self, iobase); } /* Enable interrupts again */ register_bank(iobase, 0); outb(IRCC_IER_ACTIVE_FRAME|IRCC_IER_EOM, iobase+IRCC_IER); spin_unlock(&self->lock); } #if 0 /* unused */ /* * Function ircc_is_receiving (self) * * Return TRUE is we are currently receiving a frame * */ static int ircc_is_receiving(struct ircc_cb *self) { int status = FALSE; /* int iobase; */ IRDA_DEBUG(0, __FUNCTION__ "\n"); ASSERT(self != NULL, return FALSE;); IRDA_DEBUG(0, __FUNCTION__ ": dma count = %d\n", get_dma_residue(self->io.dma)); status = (self->rx_buff.state != OUTSIDE_FRAME); return status; } #endif /* unused */ /* * Function ircc_net_open (dev) * * Start the device * */ static int ircc_net_open(struct net_device *dev) { struct irport_cb *irport; struct ircc_cb *self; int iobase; IRDA_DEBUG(0, __FUNCTION__ "\n"); ASSERT(dev != NULL, return -1;); irport = (struct irport_cb *) dev->priv; self = (struct ircc_cb *) irport->priv; ASSERT(self != NULL, return 0;); iobase = self->io.fir_base; irport_net_open(dev); /* irport allocates the irq */ /* * Always allocate the DMA channel after the IRQ, * and clean up on failure. */ if (request_dma(self->io.dma, dev->name)) { irport_net_close(dev); return -EAGAIN; } MOD_INC_USE_COUNT; return 0; } /* * Function ircc_net_close (dev) * * Stop the device * */ static int ircc_net_close(struct net_device *dev) { struct irport_cb *irport; struct ircc_cb *self; int iobase; IRDA_DEBUG(0, __FUNCTION__ "\n"); ASSERT(dev != NULL, return -1;); irport = (struct irport_cb *) dev->priv; self = (struct ircc_cb *) irport->priv; ASSERT(self != NULL, return 0;); iobase = self->io.fir_base; irport_net_close(dev); disable_dma(self->io.dma); free_dma(self->io.dma); MOD_DEC_USE_COUNT; return 0; } static void ircc_suspend(struct ircc_cb *self) { MESSAGE("%s, Suspending\n", driver_name); if (self->io.suspended) return; ircc_net_close(self->netdev); self->io.suspended = 1; } static void ircc_wakeup(struct ircc_cb *self) { unsigned long flags; if (!self->io.suspended) return; save_flags(flags); cli(); ircc_net_open(self->netdev); restore_flags(flags); MESSAGE("%s, Waking up\n", driver_name); } static int ircc_pmproc(struct pm_dev *dev, pm_request_t rqst, void *data) { struct ircc_cb *self = (struct ircc_cb*) dev->data; if (self) { switch (rqst) { case PM_SUSPEND: ircc_suspend(self); break; case PM_RESUME: ircc_wakeup(self); break; } } return 0; } #ifdef MODULE MODULE_AUTHOR("Thomas Davis "); MODULE_DESCRIPTION("SMC IrCC controller driver"); MODULE_PARM(ircc_dma, "1i"); MODULE_PARM(ircc_irq, "1i"); int init_module(void) { return ircc_init(); } void cleanup_module(void) { ircc_cleanup(); } #endif /* MODULE */