/********************************************************************* * * Filename: uircc.c * Version: 0.3 * Description: Driver for the Sharp Universal Infrared * Communications Controller (UIRCC v 1.3) * Status: Experimental. * Author: Dag Brattli * Created at: Sat Dec 26 10:59:03 1998 * Modified at: Tue Apr 20 11:15:52 1999 * Modified by: Dag Brattli * * Copyright (c) 1998 Dag Brattli, All Rights Reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * Neither Dag Brattli nor University of Tromsų admit liability nor * provide warranty for any of this software. This material is * provided "AS-IS" and at no charge. * * Applicable Models : Tecra 510CDT, 500C Series, 530CDT, 520CDT, * 740CDT, Portege 300CT, 660CDT, Satellite 220C Series, * Satellite Pro, 440C Series, 470CDT, 460C Series, 480C Series * ********************************************************************/ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include static char *driver_name = "uircc"; #define CHIP_IO_EXTENT 16 static unsigned int io[] = { 0x300, ~0, ~0, ~0 }; static unsigned int io2[] = { 0x3e8, 0, 0, 0}; static unsigned int irq[] = { 11, 0, 0, 0 }; static unsigned int dma[] = { 5, 0, 0, 0 }; static struct uircc_cb *dev_self[] = { NULL, NULL, NULL, NULL}; /* Some prototypes */ static int uircc_open(int i, unsigned int iobase, unsigned int board_addr, unsigned int irq, unsigned int dma); #ifdef MODULE static int uircc_close(struct irda_device *idev); #endif /* MODULE */ static int uircc_probe(int iobase, int board_addr, int irq, int dma); static int uircc_dma_receive(struct irda_device *idev); static int uircc_dma_receive_complete(struct irda_device *idev, int iobase); static int uircc_hard_xmit(struct sk_buff *skb, struct device *dev); static void uircc_dma_write(struct irda_device *idev, int iobase); static void uircc_change_speed(struct irda_device *idev, int baud); static void uircc_interrupt(int irq, void *dev_id, struct pt_regs *regs); static void uircc_wait_until_sent(struct irda_device *idev); static int uircc_is_receiving(struct irda_device *idev); static int uircc_toshiba_cmd(int *retval, int arg0, int arg1, int arg2); static int uircc_net_init(struct device *dev); static int uircc_net_open(struct device *dev); static int uircc_net_close(struct device *dev); /* * Function uircc_init () * * Initialize chip. Just try to find out how many chips we are dealing with * and where they are */ __initfunc(int uircc_init(void)) { int i; for ( i=0; (io[i] < 2000) && (i < 4); i++) { int ioaddr = io[i]; if (check_region(ioaddr, CHIP_IO_EXTENT) < 0) continue; if (uircc_open(i, io[i], io2[i], irq[i], dma[i]) == 0) return 0; } return -ENODEV; } /* * Function uircc_cleanup () * * Close all configured chips * */ #ifdef MODULE static void uircc_cleanup(void) { int i; DEBUG(4, __FUNCTION__ "()\n"); for (i=0; i < 4; i++) { if (dev_self[i]) uircc_close(&(dev_self[i]->idev)); } } #endif /* MODULE */ /* * Function uircc_open (iobase, irq) * * Open driver instance * */ static int uircc_open(int i, unsigned int iobase, unsigned int iobase2, unsigned int irq, unsigned int dma) { struct uircc_cb *self; struct irda_device *idev; int ret; DEBUG(4, __FUNCTION__ "()\n"); if ((uircc_probe(iobase, iobase2, irq, dma)) == -1) return -1; /* * Allocate new instance of the driver */ self = kmalloc( sizeof(struct uircc_cb), GFP_KERNEL); if (self == NULL) { printk(KERN_ERR "IrDA: Can't allocate memory for " "IrDA control block!\n"); return -ENOMEM; } memset(self, 0, sizeof(struct uircc_cb)); /* Need to store self somewhere */ dev_self[i] = self; idev = &self->idev; /* Initialize IO */ idev->io.iobase = iobase; idev->io.iobase2 = iobase2; /* Used by irport */ idev->io.irq = irq; idev->io.io_ext = CHIP_IO_EXTENT; idev->io.io_ext2 = 8; /* Used by irport */ idev->io.dma = dma; idev->io.fifo_size = 16; /* Lock the port that we need */ ret = check_region(idev->io.iobase, idev->io.io_ext); if (ret < 0) { DEBUG(0, __FUNCTION__ "(), can't get iobase of 0x%03x\n", idev->io.iobase); /* uircc_cleanup( self->idev); */ return -ENODEV; } ret = check_region(idev->io.iobase2, idev->io.io_ext2); if (ret < 0) { DEBUG(0, __FUNCTION__ "(), can't get iobase of 0x%03x\n", idev->io.iobase2); /* uircc_cleanup( self->idev); */ return -ENODEV; } request_region(idev->io.iobase, idev->io.io_ext, idev->name); request_region(idev->io.iobase2, idev->io.io_ext2, idev->name); /* Initialize QoS for this device */ irda_init_max_qos_capabilies(&idev->qos); /* The only value we must override it the baudrate */ idev->qos.baud_rate.bits = IR_9600|IR_19200|IR_38400|IR_57600| IR_115200/*IR_576000|IR_1152000 |(IR_4000000 << 8)*/; idev->qos.min_turn_time.bits = 0x0f; irda_qos_bits_to_value(&idev->qos); idev->flags = IFF_FIR|IFF_SIR|IFF_DMA|IFF_PIO; /* Specify which buffer allocation policy we need */ idev->rx_buff.flags = GFP_KERNEL | GFP_DMA; idev->tx_buff.flags = GFP_KERNEL | GFP_DMA; /* Max DMA buffer size needed = (data_size + 6) * (window_size) + 6; */ idev->rx_buff.truesize = 4000; idev->tx_buff.truesize = 4000; /* Initialize callbacks */ idev->change_speed = uircc_change_speed; idev->wait_until_sent = uircc_wait_until_sent; idev->is_receiving = uircc_is_receiving; /* Override the network functions we need to use */ idev->netdev.init = uircc_net_init; idev->netdev.hard_start_xmit = uircc_hard_xmit; idev->netdev.open = uircc_net_open; idev->netdev.stop = uircc_net_close; irport_open(iobase2); /* Open the IrDA device */ irda_device_open(idev, driver_name, self); return 0; } /* * Function uircc_close (idev) * * Close driver instance * */ #ifdef MODULE static int uircc_close(struct irda_device *idev) { int iobase; int status; DEBUG(4, __FUNCTION__ "()\n"); ASSERT(idev != NULL, return -1;); ASSERT(idev->magic == IRDA_DEVICE_MAGIC, return -1;); iobase = idev->io.iobase; /* Some magic to disable FIR and enable SIR */ uircc_toshiba_cmd(&status, 0xffff, 0x001b, 0x0000); /* Disable modem */ outb(0x00, iobase+UIRCC_CR10); irport_close(idev->io.iobase2); /* Release the PORT that this driver is using */ DEBUG(4, __FUNCTION__ "(), Releasing Region %03x\n", idev->io.iobase); release_region(idev->io.iobase, idev->io.io_ext); if (idev->io.iobase2) { DEBUG(4, __FUNCTION__ "(), Releasing Region %03x\n", idev->io.iobase2); release_region(idev->io.iobase2, idev->io.io_ext2); } irda_device_close(idev); return 0; } #endif /* MODULE */ /* * Function uircc_probe (iobase, board_addr, irq, dma) * * Returns non-negative on success. * */ static int uircc_probe(int iobase, int iobase2, int irq, int dma) { int version; DEBUG(4, __FUNCTION__ "()\n"); /* read the chip version, should be 0x03 */ version = inb(iobase+UIRCC_SR8); if (version != 0x03) { DEBUG(0, __FUNCTION__ "(), Wrong chip version"); return -1; } printk(KERN_INFO "Sharp UIRCC IrDA driver loaded. Version: 0x%02x\n", version); /* Reset chip */ outb(UIRCC_CR0_SYS_RST, iobase+UIRCC_CR0); /* Initialize some registers */ outb(0x03, iobase+UIRCC_CR15); outb(0, iobase+UIRCC_CR11); outb(0, iobase+UIRCC_CR9); DEBUG(0, __FUNCTION__ "(), sr15=%#x\n", inb(iobase+UIRCC_SR15)); /* Enable DMA single mode */ outb(UIRCC_CR1_RX_DMA|UIRCC_CR1_TX_DMA|UIRCC_CR1_MUST_SET, iobase+UIRCC_CR1); /* Disable interrupts */ outb(0xff, iobase+UIRCC_CR2); /* Set self poll address */ return 0; } /* * Function uircc_change_speed (idev, baud) * * Change the speed of the device * */ static void uircc_change_speed(struct irda_device *idev, int speed) { struct uircc_cb *self; int iobase; int modem = UIRCC_CR10_SIR; int status; DEBUG(0, __FUNCTION__ "()\n"); /* Just test the high speed stuff */ /*speed = 4000000;*/ ASSERT(idev != NULL, return;); ASSERT(idev->magic == IRDA_DEVICE_MAGIC, return;); self = idev->priv; iobase = idev->io.iobase; /* Update accounting for new speed */ idev->io.baudrate = speed; /* Disable interrupts */ outb(0xff, iobase+UIRCC_CR2); switch (speed) { case 9600: case 19200: case 37600: case 57600: case 115200: irport_open(idev->io.iobase2); irport_change_speed( idev->io.iobase2, speed); /* Some magic to disable FIR and enable SIR */ uircc_toshiba_cmd(&status, 0xffff, 0x001b, 0x0000); modem = UIRCC_CR10_SIR; break; case 576000: DEBUG(0, __FUNCTION__ "(), handling baud of 576000\n"); break; case 1152000: DEBUG(0, __FUNCTION__ "(), handling baud of 1152000\n"); break; case 4000000: irport_close(idev->io.iobase2); /* Some magic to disable SIR and enable FIR */ uircc_toshiba_cmd(&status, 0xffff, 0x001b, 0x0001); modem = UIRCC_CR10_FIR; DEBUG(0, __FUNCTION__ "(), handling baud of 4000000\n"); /* Set self pole address */ //outb(0xfe, iobase+UIRCC_CR8); /* outb(0x10, iobase+UIRCC_CR11); */ break; default: DEBUG( 0, __FUNCTION__ "(), unknown baud rate of %d\n", speed); break; } /* Set appropriate speed mode */ outb(modem, iobase+UIRCC_CR10); idev->netdev.tbusy = 0; /* Enable some interrupts so we can receive frames */ if (speed > 115200) { /* Enable DMA single mode */ outb(UIRCC_CR1_RX_DMA|UIRCC_CR1_TX_DMA|UIRCC_CR1_MUST_SET, iobase+UIRCC_CR1); /* Enable all interrupts */ outb(0, iobase+UIRCC_CR2); uircc_dma_receive(idev); } } /* * Function uircc_hard_xmit (skb, dev) * * Transmit the frame! * */ static int uircc_hard_xmit(struct sk_buff *skb, struct device *dev) { struct irda_device *idev; int iobase; int mtt; idev = (struct irda_device *) dev->priv; ASSERT(idev != NULL, return 0;); ASSERT(idev->magic == IRDA_DEVICE_MAGIC, return 0;); iobase = idev->io.iobase; DEBUG(4, __FUNCTION__ "(%ld), skb->len=%d\n", jiffies, (int) skb->len); /* Reset carrier latch */ /*outb(0x02, iobase+UIRCC_CR0);*/ /* Use irport for SIR speeds */ if (idev->io.baudrate <= 115200) { return irport_hard_xmit(skb, dev); } DEBUG(0, __FUNCTION__ "(), sr0=%#x, sr1=%#x, sr2=%#x, sr3=%#x, sr10=%#x, sr11=%#x\n", inb(iobase+UIRCC_SR0), inb(iobase+UIRCC_SR3), inb(iobase+UIRCC_SR2), inb(iobase+UIRCC_SR3), inb(iobase+UIRCC_SR10), inb(iobase+UIRCC_SR11)); /* Lock transmit buffer */ if (irda_lock((void *) &dev->tbusy) == FALSE) return -EBUSY; memcpy(idev->tx_buff.data, skb->data, skb->len); /* Make sure that the length is a multiple of 16 bits */ if (skb->len & 0x01) skb->len++; idev->tx_buff.len = skb->len; idev->tx_buff.data = idev->tx_buff.head; mtt = irda_get_mtt(skb); /* Use udelay for delays less than 50 us. */ if (mtt) udelay(mtt); /* Enable transmit interrupts */ outb(0, iobase+UIRCC_CR2); uircc_dma_write(idev, iobase); dev_kfree_skb(skb); return 0; } /* * Function uircc_dma_write (idev, iobase) * * Transmit data using DMA * */ static void uircc_dma_write(struct irda_device *idev, int iobase) { struct uircc_cb *self; DEBUG(4, __FUNCTION__ "()\n"); ASSERT(idev != NULL, return;); ASSERT(idev->magic == IRDA_DEVICE_MAGIC, return;); self = idev->priv; /* Receiving disable */ self->cr3 &= ~UIRCC_CR3_RECV_EN; outb(self->cr3, iobase+UIRCC_CR3); /* Set modem */ outb(0x80, iobase+UIRCC_CR10); /* Enable transmit DMA */ outb(UIRCC_CR1_TX_DMA|UIRCC_CR1_MUST_SET, iobase+UIRCC_CR1); ASSERT((((__u32)(idev->tx_buff.data)) & 0x01) != 0x01, return;); setup_dma(idev->io.dma, idev->tx_buff.data, idev->tx_buff.len, DMA_MODE_WRITE); idev->io.direction = IO_XMIT; /* Set frame length (should be the real length without padding */ outb(idev->tx_buff.len & 0xff, iobase+UIRCC_CR4); /* Low byte */ outb(idev->tx_buff.len >> 8, iobase+UIRCC_CR5); /* High byte */ /* Enable transmit and transmit CRC */ self->cr3 |= (UIRCC_CR3_XMIT_EN|UIRCC_CR3_TX_CRC_EN); outb(self->cr3, iobase+UIRCC_CR3); } /* * Function uircc_dma_xmit_complete (idev) * * The transfer of a frame in finished. This function will only be called * by the interrupt handler * */ static void uircc_dma_xmit_complete( struct irda_device *idev, int underrun) { struct uircc_cb *self; int iobase; int len; DEBUG(4, __FUNCTION__ "()\n"); ASSERT(idev != NULL, return;); ASSERT(idev->magic == IRDA_DEVICE_MAGIC, return;); self = idev->priv; iobase = idev->io.iobase; /* Select TX counter */ outb(UIRCC_CR0_CNT_SWT, iobase+UIRCC_CR0); /* Read TX length counter */ len = inb(iobase+UIRCC_SR4); /* Low byte */ len |= inb(iobase+UIRCC_SR5) << 8; /* High byte */ DEBUG(4, __FUNCTION__ "(), sent %d bytes\n", len); /* Disable transmit */ self->cr3 &= ~UIRCC_CR3_XMIT_EN; outb(self->cr3, iobase+UIRCC_CR3); /* Transmit reset (just to be sure) */ outb(UIRCC_CR0_XMIT_RST, iobase+UIRCC_CR0); /* Check for underrrun! */ if (underrun) { idev->stats.tx_errors++; idev->stats.tx_fifo_errors++; } else { idev->stats.tx_packets++; idev->stats.tx_bytes += idev->tx_buff.len; } /* Unlock tx_buff and request another frame */ idev->netdev.tbusy = 0; /* Unlock */ idev->media_busy = FALSE; /* Tell the network layer, that we can accept more frames */ mark_bh(NET_BH); } /* * Function uircc_dma_receive (idev) * * Get ready for receiving a frame. The device will initiate a DMA * if it starts to receive a frame. * */ static int uircc_dma_receive(struct irda_device *idev) { struct uircc_cb *self; int iobase; ASSERT(idev != NULL, return -1;); ASSERT(idev->magic == IRDA_DEVICE_MAGIC, return -1;); DEBUG(4, __FUNCTION__ "\n"); self = idev->priv; iobase= idev->io.iobase; /* Transmit disable */ /* self->cr3 &= ~UIRCC_CR3_XMIT_EN; */ self->cr3 = 0; outb(self->cr3, iobase+UIRCC_CR3); /* Transmit reset (just in case) */ outb(UIRCC_CR0_XMIT_RST|0x17, iobase+UIRCC_CR0); /* Set modem */ outb(0x08, iobase+UIRCC_CR10); /* Enable receiving with CRC */ self->cr3 = (UIRCC_CR3_RECV_EN|UIRCC_CR3_RX_CRC_EN); outb(self->cr3, iobase+UIRCC_CR3); /* Make sure Rx DMA is set */ outb(UIRCC_CR1_RX_DMA|UIRCC_CR1_MUST_SET, iobase+UIRCC_CR1); /* Rx reset */ /* outb(UIRCC_CR0_RECV_RST, iobase+UIRCC_CR0); */ setup_dma(idev->io.dma, idev->rx_buff.data, idev->rx_buff.truesize, DMA_MODE_READ); /* driver->media_busy = FALSE; */ idev->io.direction = IO_RECV; idev->rx_buff.data = idev->rx_buff.head; #if 0 /* Enable receiving with CRC */ self->cr3 = (UIRCC_CR3_RECV_EN|UIRCC_CR3_RX_CRC_EN); outb(self->cr3, iobase+UIRCC_CR3); #endif DEBUG(4, __FUNCTION__ "(), cr3=%#x\n", self->cr3); /* Address check? */ return 0; } /* * Function uircc_dma_receive_complete (idev) * * Finished with receiving frames * * */ static int uircc_dma_receive_complete(struct irda_device *idev, int iobase) { struct sk_buff *skb; struct uircc_cb *self; int len; self = idev->priv; DEBUG(0, __FUNCTION__ "()\n"); /* Check for CRC or framing error */ if (inb(iobase+UIRCC_SR0) & UIRCC_SR0_RX_CRCFRM) { DEBUG(0, __FUNCTION__ "(), CRC or FRAME error\n"); return -1; } /* Select receive length counter */ outb(0x00, iobase+UIRCC_CR0); /* Read frame length */ len = inb(iobase+UIRCC_SR4); /* Low byte */ len |= inb(iobase+UIRCC_SR5) << 8; /* High byte */ DEBUG(0, __FUNCTION__ "(), len=%d\n", len); /* Receiving disable */ self->cr3 &= ~UIRCC_CR3_RECV_EN; outb(self->cr3, iobase+UIRCC_CR3); skb = dev_alloc_skb(len+1); if (skb == NULL) { printk(KERN_INFO __FUNCTION__ "(), memory squeeze, dropping frame.\n"); /* Restore bank register */ return FALSE; } /* Make sure IP header gets aligned */ skb_reserve(skb, 1); /* Copy frame without CRC */ /* if ( idev->io.baudrate < 4000000) { */ /* skb_put( skb, len-2); */ /* memcpy( skb->data, idev->rx_buff.head, len-2); */ /* } else { */ /* skb_put( skb, len-4); */ /* memcpy( skb->data, idev->rx_buff.head, len-4); */ /* } */ skb_put(skb, len); memcpy(skb->data, idev->rx_buff.data, len); idev->stats.rx_packets++; skb->dev = &idev->netdev; skb->mac.raw = skb->data; skb->protocol = htons(ETH_P_IRDA); netif_rx(skb); return TRUE; } /* * Function uircc_interrupt (irq, dev_id, regs) * * An interrupt from the chip has arrived. Time to do some work * */ static void uircc_interrupt(int irq, void *dev_id, struct pt_regs *regs) { __u8 sr3; int iobase; struct irda_device *idev = (struct irda_device *) dev_id; if (idev == NULL) { printk( KERN_WARNING "%s: irq %d for unknown device.\n", driver_name, irq); return; } if (idev->io.baudrate <= 115200) return irport_interrupt( irq, dev_id, regs); iobase = idev->io.iobase; /* Read interrupt status */ sr3 = inb( iobase+UIRCC_SR3); if (!sr3) { DEBUG(4,"**\n"); return; } idev->netdev.interrupt = 1; DEBUG(4, __FUNCTION__ "(), sr3=%#x, sr2=%#x, sr10=%#x\n", inb( iobase+UIRCC_SR3), inb( iobase+UIRCC_SR2), inb( iobase+UIRCC_SR10)); /* * Check what interrupt this is. The UIRCC will not report two * different interrupts at the same time! */ switch(sr3) { case UIRCC_SR3_RX_EOF: /* Check for end of frame */ uircc_dma_receive_complete(idev, iobase); break; case UIRCC_SR3_TXUR: /* Check for transmit underrun */ uircc_dma_xmit_complete(idev, TRUE); uircc_dma_receive(idev); outb(0, iobase+UIRCC_CR2); break; case UIRCC_SR3_TX_DONE: uircc_dma_xmit_complete(idev, FALSE); uircc_dma_receive(idev); outb(0x0d, iobase+UIRCC_CR2); break; case UIRCC_SR3_TMR_OUT: /* Disable timer */ outb(inb(iobase+UIRCC_CR11) & ~UIRCC_CR11_TMR_EN, iobase+UIRCC_CR11); break; default: DEBUG(0, __FUNCTION__ "(), unknown interrupt status=%#x\n", sr3); break; } idev->netdev.interrupt = 0; } /* * Function uircc_wait_until_sent (idev) * * This function should put the current thread to sleep until all data * have been sent, so it is safe to change the speed. */ static void uircc_wait_until_sent( struct irda_device *idev) { /* Just delay 60 ms */ current->state = TASK_INTERRUPTIBLE; schedule_timeout(6); } /* * Function uircc_is_receiving (idev) * * Return TRUE is we are currently receiving a frame * */ static int uircc_is_receiving( struct irda_device *idev) { int status = FALSE; /* int iobase; */ ASSERT(idev != NULL, return FALSE;); ASSERT(idev->magic == IRDA_DEVICE_MAGIC, return FALSE;); if (idev->io.baudrate > 115200) { } else status = (idev->rx_buff.state != OUTSIDE_FRAME); return status; } /* * Function uircc_net_init (dev) * * Initialize network device * */ static int uircc_net_init( struct device *dev) { DEBUG( 4, __FUNCTION__ "()\n"); /* Setup to be a normal IrDA network device driver */ irda_device_setup(dev); /* Insert overrides below this line! */ return 0; } /* * Function uircc_net_open (dev) * * Start the device * */ static int uircc_net_open(struct device *dev) { struct irda_device *idev; int iobase; DEBUG( 4, __FUNCTION__ "()\n"); ASSERT(dev != NULL, return -1;); idev = (struct irda_device *) dev->priv; ASSERT(idev != NULL, return 0;); ASSERT(idev->magic == IRDA_DEVICE_MAGIC, return 0;); iobase = idev->io.iobase; if (request_irq(idev->io.irq, uircc_interrupt, 0, idev->name, (void *) idev)) { return -EAGAIN; } /* * Always allocate the DMA channel after the IRQ, * and clean up on failure. */ if (request_dma(idev->io.dma, idev->name)) { free_irq(idev->io.irq, idev); return -EAGAIN; } /* Ready to play! */ dev->tbusy = 0; dev->interrupt = 0; dev->start = 1; /* turn on interrupts */ MOD_INC_USE_COUNT; return 0; } /* * Function uircc_net_close (dev) * * Stop the device * */ static int uircc_net_close(struct device *dev) { struct irda_device *idev; int iobase; DEBUG(4, __FUNCTION__ "()\n"); /* Stop device */ dev->tbusy = 1; dev->start = 0; ASSERT(dev != NULL, return -1;); idev = (struct irda_device *) dev->priv; ASSERT(idev != NULL, return 0;); ASSERT(idev->magic == IRDA_DEVICE_MAGIC, return 0;); iobase = idev->io.iobase; disable_dma(idev->io.dma); /* Disable interrupts */ free_irq(idev->io.irq, idev); free_dma(idev->io.dma); MOD_DEC_USE_COUNT; return 0; } /* * Function uircc_toshiba_cmd (arg0, arg1, arg2) * * disable FIR: uircc_toshiba_cmd(&status, 0xffff, 0x001b, 0x0000); * enable FIR: uircc_toshiba_cmd(&status, 0xffff, 0x001b, 0x0001); * IRDA status: uircc_toshiba_cmd(&status, 0xfefe, 0x001b, 0x0000); */ static int uircc_toshiba_cmd(int *retval, int arg0, int arg1, int arg2) { char return_code = 0; __asm__ volatile ("inb $0xb2,%%al; " "movb %%ah,%%al; " : /* Output */ "=al" (return_code), "=ecx" (*retval) : /* Input */ "ax" (arg0), "bx" (arg1), "cx" (arg2) ); /* * Return * 0x00 = OK * 0x80 = Function not supported by system * 0x83 = Input data error */ return (int) return_code; } #ifdef MODULE /* * Function init_module (void) * * * */ int init_module(void) { return uircc_init(); } /* * Function cleanup_module (void) * * * */ void cleanup_module(void) { uircc_cleanup(); } #endif /* MODULE */