/* Linux Driver for BusLogic MultiMaster SCSI Host Adapters Copyright 1995 by Leonard N. Zubkoff This program is free software; you may redistribute and/or modify it under the terms of the GNU General Public License Version 2 as published by the Free Software Foundation, provided that none of the source code or runtime copyright notices are removed or modified. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for complete details. The author respectfully requests that any modifications to this software be sent directly to him for evaluation and testing. Special thanks to Wayne Yen and Alex Win of BusLogic, whose advice has been invaluable, to David Gentzel, for writing the original Linux BusLogic driver, and to Paul Gortmaker, for being such a dedicated test site. */ #define BusLogic_DriverVersion "2.0.6" #define BusLogic_DriverDate "1 December 1996" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "scsi.h" #include "hosts.h" #include "sd.h" #include "BusLogic.h" /* BusLogic_CommandLineEntryCount is a count of the number of "BusLogic=" entries provided on the Linux Kernel Command Line. */ static int BusLogic_CommandLineEntryCount = 0; /* BusLogic_CommandLineEntries is an array of Command Line Entry structures representing the "BusLogic=" entries provided on the Linux Kernel Command Line. */ static BusLogic_CommandLineEntry_T BusLogic_CommandLineEntries[BusLogic_MaxHostAdapters]; /* BusLogic_ProbeOptions is a bit mask of Probe Options to be applied across all Host Adapters. */ static int BusLogic_ProbeOptions = 0; /* BusLogic_GlobalOptions is a bit mask of Global Options to be applied across all Host Adapters. */ static int BusLogic_GlobalOptions = 0; /* BusLogic_RegisteredHostAdapters is a linked list of all the registered BusLogic Host Adapters. */ static BusLogic_HostAdapter_T *BusLogic_RegisteredHostAdapters = NULL; /* BusLogic_StandardAddresses is the list of standard ISA I/O Addresses at which BusLogic Host Adapters may potentially be found. */ static unsigned int BusLogic_IO_StandardAddresses[] = { 0x330, 0x334, 0x230, 0x234, 0x130, 0x134, 0 }; /* BusLogic_IO_AddressProbeList is the list of I/O Addresses to be probed for potential BusLogic Host Adapters. It is initialized by interrogating the PCI Configuration Space on PCI machines as well as from the list of standard BusLogic I/O Addresses. */ static unsigned int BusLogic_IO_AddressProbeList[BusLogic_IO_MaxProbeAddresses+1] = { 0 }; /* BusLogic_IRQ_UsageCount stores a count of the number of Host Adapters using a given IRQ Channel, which is necessary to support PCI, EISA, or MCA shared interrupts. */ static int BusLogic_IRQ_UsageCount[NR_IRQS] = { 0 }; /* BusLogic_CommandFailureReason holds a string identifying the reason why a call to BusLogic_Command failed. It is only non-NULL when BusLogic_Command returns a failure code. */ static char *BusLogic_CommandFailureReason; /* BusLogic_ProcDirectoryEntry is the BusLogic /proc/scsi directory entry. */ static struct proc_dir_entry BusLogic_ProcDirectoryEntry = { PROC_SCSI_BUSLOGIC, 8, "BusLogic", S_IFDIR | S_IRUGO | S_IXUGO, 2 }; /* BusLogic_AnnounceDriver announces the Driver Version and Date, Author's Name, Copyright Notice, and Contact Address. */ static void BusLogic_AnnounceDriver(void) { static boolean DriverAnnouncementPrinted = false; if (DriverAnnouncementPrinted) return; printk("scsi: ***** BusLogic SCSI Driver Version " BusLogic_DriverVersion " of " BusLogic_DriverDate " *****\n"); printk("scsi: Copyright 1995 by Leonard N. Zubkoff \n"); DriverAnnouncementPrinted = true; } /* BusLogic_DriverInfo returns the Controller Name to identify this SCSI Driver and Host Adapter. */ const char *BusLogic_DriverInfo(SCSI_Host_T *Host) { BusLogic_HostAdapter_T *HostAdapter = (BusLogic_HostAdapter_T *) Host->hostdata; return HostAdapter->ControllerName; } /* BusLogic_RegisterHostAdapter adds Host Adapter to the list of registered BusLogic Host Adapters. */ static void BusLogic_RegisterHostAdapter(BusLogic_HostAdapter_T *HostAdapter) { HostAdapter->Next = NULL; if (BusLogic_RegisteredHostAdapters != NULL) { BusLogic_HostAdapter_T *LastHostAdapter = BusLogic_RegisteredHostAdapters; BusLogic_HostAdapter_T *NextHostAdapter; while ((NextHostAdapter = LastHostAdapter->Next) != NULL) LastHostAdapter = NextHostAdapter; LastHostAdapter->Next = HostAdapter; } else BusLogic_RegisteredHostAdapters = HostAdapter; } /* BusLogic_UnregisterHostAdapter removes Host Adapter from the list of registered BusLogic Host Adapters. */ static void BusLogic_UnregisterHostAdapter(BusLogic_HostAdapter_T *HostAdapter) { if (BusLogic_RegisteredHostAdapters != HostAdapter) { BusLogic_HostAdapter_T *LastHostAdapter = BusLogic_RegisteredHostAdapters; while (LastHostAdapter != NULL && LastHostAdapter->Next != HostAdapter) LastHostAdapter = LastHostAdapter->Next; if (LastHostAdapter != NULL) LastHostAdapter->Next = HostAdapter->Next; } else BusLogic_RegisteredHostAdapters = HostAdapter->Next; HostAdapter->Next = NULL; } /* BusLogic_CreateMailboxes allocates the Outgoing and Incoming Mailboxes for Host Adapter. */ static boolean BusLogic_CreateMailboxes(BusLogic_HostAdapter_T *HostAdapter) { HostAdapter->FirstOutgoingMailbox = (BusLogic_OutgoingMailbox_T *) scsi_init_malloc(HostAdapter->MailboxCount * (sizeof(BusLogic_OutgoingMailbox_T) + sizeof(BusLogic_IncomingMailbox_T)), (HostAdapter->BounceBuffersRequired ? GFP_ATOMIC | GFP_DMA : GFP_ATOMIC)); if (HostAdapter->FirstOutgoingMailbox == NULL) { printk("scsi%d: UNABLE TO ALLOCATE MAILBOXES - DETACHING\n", HostAdapter->HostNumber); return false; } HostAdapter->LastOutgoingMailbox = HostAdapter->FirstOutgoingMailbox + HostAdapter->MailboxCount - 1; HostAdapter->FirstIncomingMailbox = (BusLogic_IncomingMailbox_T *) (HostAdapter->LastOutgoingMailbox + 1); HostAdapter->LastIncomingMailbox = HostAdapter->FirstIncomingMailbox + HostAdapter->MailboxCount - 1; return true; } /* BusLogic_DestroyMailboxes deallocates the Outgoing and Incoming Mailboxes for Host Adapter. */ static void BusLogic_DestroyMailboxes(BusLogic_HostAdapter_T *HostAdapter) { if (HostAdapter->FirstOutgoingMailbox == NULL) return; scsi_init_free((char *) HostAdapter->FirstOutgoingMailbox, HostAdapter->MailboxCount * (sizeof(BusLogic_OutgoingMailbox_T) + sizeof(BusLogic_IncomingMailbox_T))); } /* BusLogic_CreateCCBs allocates the initial Command Control Blocks (CCBs) for Host Adapter. */ static boolean BusLogic_CreateCCBs(BusLogic_HostAdapter_T *HostAdapter) { int i; for (i = 0; i < HostAdapter->InitialCCBs; i++) { BusLogic_CCB_T *CCB = (BusLogic_CCB_T *) scsi_init_malloc(sizeof(BusLogic_CCB_T), (HostAdapter->BounceBuffersRequired ? GFP_ATOMIC | GFP_DMA : GFP_ATOMIC)); if (CCB == NULL) { printk("scsi%d: UNABLE TO ALLOCATE CCB %d - DETACHING\n", HostAdapter->HostNumber, i); return false; } memset(CCB, 0, sizeof(BusLogic_CCB_T)); CCB->HostAdapter = HostAdapter; CCB->Status = BusLogic_CCB_Free; CCB->Next = HostAdapter->Free_CCBs; CCB->NextAll = HostAdapter->All_CCBs; HostAdapter->Free_CCBs = CCB; HostAdapter->All_CCBs = CCB; } return true; } /* BusLogic_DestroyCCBs deallocates the CCBs for Host Adapter. */ static void BusLogic_DestroyCCBs(BusLogic_HostAdapter_T *HostAdapter) { BusLogic_CCB_T *NextCCB = HostAdapter->All_CCBs, *CCB; HostAdapter->All_CCBs = NULL; HostAdapter->Free_CCBs = NULL; while ((CCB = NextCCB) != NULL) { NextCCB = CCB->NextAll; scsi_init_free((char *) CCB, sizeof(BusLogic_CCB_T)); } } /* BusLogic_AllocateCCB allocates a CCB from the Host Adapter's free list, allocating more memory from the Kernel if necessary. The Host Adapter's Lock should have already been acquired by the caller. */ static BusLogic_CCB_T *BusLogic_AllocateCCB(BusLogic_HostAdapter_T *HostAdapter) { static unsigned long SerialNumber = 0; BusLogic_CCB_T *CCB; int Allocated; CCB = HostAdapter->Free_CCBs; if (CCB != NULL) { CCB->SerialNumber = ++SerialNumber; HostAdapter->Free_CCBs = CCB->Next; CCB->Next = NULL; return CCB; } for (Allocated = 0; Allocated < HostAdapter->IncrementalCCBs; Allocated++) { CCB = (BusLogic_CCB_T *) scsi_init_malloc(sizeof(BusLogic_CCB_T), (HostAdapter->BounceBuffersRequired ? GFP_ATOMIC | GFP_DMA : GFP_ATOMIC)); if (CCB == NULL) break; memset(CCB, 0, sizeof(BusLogic_CCB_T)); CCB->HostAdapter = HostAdapter; CCB->Status = BusLogic_CCB_Free; CCB->Next = HostAdapter->Free_CCBs; CCB->NextAll = HostAdapter->All_CCBs; HostAdapter->Free_CCBs = CCB; HostAdapter->All_CCBs = CCB; } CCB = HostAdapter->Free_CCBs; if (CCB == NULL) { printk("scsi%d: Failed to allocate additional CCBs\n", HostAdapter->HostNumber); return NULL; } printk("scsi%d: Allocated %d additional CCBs\n", HostAdapter->HostNumber, Allocated); CCB->SerialNumber = ++SerialNumber; HostAdapter->Free_CCBs = CCB->Next; CCB->Next = NULL; return CCB; } /* BusLogic_DeallocateCCB deallocates a CCB, returning it to the Host Adapter's free list. The Host Adapter's Lock should have already been acquired by the caller. */ static void BusLogic_DeallocateCCB(BusLogic_CCB_T *CCB) { BusLogic_HostAdapter_T *HostAdapter = CCB->HostAdapter; CCB->Command = NULL; CCB->Status = BusLogic_CCB_Free; CCB->Next = HostAdapter->Free_CCBs; HostAdapter->Free_CCBs = CCB; } /* BusLogic_Command sends the command OperationCode to HostAdapter, optionally providing ParameterLength bytes of ParameterData and receiving at most ReplyLength bytes of ReplyData; any excess reply data is received but discarded. On success, this function returns the number of reply bytes read from the Host Adapter (including any discarded data); on failure, it returns -1 if the command was invalid, or -2 if a timeout occurred. This function is only called during controller detection and initialization, so performance and latency are not critical, and exclusive access to the Host Adapter hardware is assumed. Once the controller and driver are initialized, the only Host Adapter command that is issued is the single byte Execute Mailbox Command operation code, which does not require waiting for the Host Adapter Ready bit to be set in the Status Register. */ static int BusLogic_Command(BusLogic_HostAdapter_T *HostAdapter, BusLogic_OperationCode_T OperationCode, void *ParameterData, int ParameterLength, void *ReplyData, int ReplyLength) { unsigned char *ParameterPointer = (unsigned char *) ParameterData; unsigned char *ReplyPointer = (unsigned char *) ReplyData; unsigned char StatusRegister = 0, InterruptRegister; int ReplyBytes = 0, TimeoutCounter; /* Clear out the Reply Data if provided. */ if (ReplyLength > 0) memset(ReplyData, 0, ReplyLength); /* Wait for the Host Adapter Ready bit to be set and the Command/Parameter Register Busy bit to be reset in the Status Register. */ TimeoutCounter = loops_per_sec >> 3; while (--TimeoutCounter >= 0) { StatusRegister = BusLogic_ReadStatusRegister(HostAdapter); if ((StatusRegister & BusLogic_HostAdapterReady) && !(StatusRegister & BusLogic_CommandParameterRegisterBusy)) break; } BusLogic_CommandFailureReason = "Timeout waiting for Host Adapter Ready"; if (TimeoutCounter < 0) return -2; /* Write the OperationCode to the Command/Parameter Register. */ HostAdapter->HostAdapterCommandCompleted = false; BusLogic_WriteCommandParameterRegister(HostAdapter, OperationCode); /* Write any additional Parameter Bytes. */ TimeoutCounter = 10000; while (ParameterLength > 0 && --TimeoutCounter >= 0) { /* Wait 100 microseconds to give the Host Adapter enough time to determine whether the last value written to the Command/Parameter Register was valid or not. If the Command Complete bit is set in the Interrupt Register, then the Command Invalid bit in the Status Register will be reset if the Operation Code or Parameter was valid and the command has completed, or set if the Operation Code or Parameter was invalid. If the Data In Register Ready bit is set in the Status Register, then the Operation Code was valid, and data is waiting to be read back from the Host Adapter. Otherwise, wait for the Command/Parameter Register Busy bit in the Status Register to be reset. */ udelay(100); InterruptRegister = BusLogic_ReadInterruptRegister(HostAdapter); StatusRegister = BusLogic_ReadStatusRegister(HostAdapter); if (InterruptRegister & BusLogic_CommandComplete) break; if (HostAdapter->HostAdapterCommandCompleted) break; if (StatusRegister & BusLogic_DataInRegisterReady) break; if (StatusRegister & BusLogic_CommandParameterRegisterBusy) continue; BusLogic_WriteCommandParameterRegister(HostAdapter, *ParameterPointer++); ParameterLength--; } BusLogic_CommandFailureReason = "Timeout waiting for Parameter Acceptance"; if (TimeoutCounter < 0) return -2; /* The Modify I/O Address command does not cause a Command Complete Interrupt. */ if (OperationCode == BusLogic_ModifyIOAddress) { StatusRegister = BusLogic_ReadStatusRegister(HostAdapter); BusLogic_CommandFailureReason = "Modify I/O Address Invalid"; if (StatusRegister & BusLogic_CommandInvalid) return -1; BusLogic_CommandFailureReason = NULL; return 0; } /* Select an appropriate timeout value for awaiting command completion. */ switch (OperationCode) { case BusLogic_InquireInstalledDevicesID0to7: case BusLogic_InquireInstalledDevicesID8to15: case BusLogic_InquireTargetDevices: /* Approximately 60 seconds. */ TimeoutCounter = loops_per_sec << 2; break; default: /* Approximately 1 second. */ TimeoutCounter = loops_per_sec >> 4; break; } /* Receive any Reply Bytes, waiting for either the Command Complete bit to be set in the Interrupt Register, or for the Interrupt Handler to set the Host Adapter Command Completed bit in the Host Adapter structure. */ while (--TimeoutCounter >= 0) { InterruptRegister = BusLogic_ReadInterruptRegister(HostAdapter); StatusRegister = BusLogic_ReadStatusRegister(HostAdapter); if (InterruptRegister & BusLogic_CommandComplete) break; if (HostAdapter->HostAdapterCommandCompleted) break; if (StatusRegister & BusLogic_DataInRegisterReady) if (++ReplyBytes <= ReplyLength) *ReplyPointer++ = BusLogic_ReadDataInRegister(HostAdapter); else BusLogic_ReadDataInRegister(HostAdapter); if (OperationCode == BusLogic_FetchHostAdapterLocalRAM && (StatusRegister & BusLogic_HostAdapterReady)) break; } BusLogic_CommandFailureReason = "Timeout waiting for Command Complete"; if (TimeoutCounter < 0) return -2; /* If testing Command Complete Interrupts, wait a short while in case the loop immediately above terminated due to the Command Complete bit being set in the Interrupt Register, but the interrupt hasn't actually been processed yet. Otherwise, acknowledging the interrupt here could prevent the interrupt test from succeeding. */ if (OperationCode == BusLogic_TestCommandCompleteInterrupt) udelay(10000); /* Clear any pending Command Complete Interrupt. */ BusLogic_WriteControlRegister(HostAdapter, BusLogic_InterruptReset); if (BusLogic_GlobalOptions & BusLogic_TraceConfiguration) if (OperationCode != BusLogic_TestCommandCompleteInterrupt) { int i; printk("BusLogic_Command(%02X) Status = %02X: %2d ==> %2d:", OperationCode, StatusRegister, ReplyLength, ReplyBytes); if (ReplyLength > ReplyBytes) ReplyLength = ReplyBytes; for (i = 0; i < ReplyLength; i++) printk(" %02X", ((unsigned char *) ReplyData)[i]); printk("\n"); } /* Process Command Invalid conditions. */ if (StatusRegister & BusLogic_CommandInvalid) { /* Some early BusLogic Host Adapters may not recover properly from a Command Invalid condition, so if this appears to be the case, a Soft Reset is issued to the Host Adapter. Potentially invalid commands are never attempted after Mailbox Initialization is performed, so there should be no Host Adapter state lost by a Soft Reset in response to a Command Invalid condition. */ udelay(1000); StatusRegister = BusLogic_ReadStatusRegister(HostAdapter); if (StatusRegister != (BusLogic_HostAdapterReady | BusLogic_InitializationRequired)) { BusLogic_WriteControlRegister(HostAdapter, BusLogic_SoftReset); udelay(1000); } BusLogic_CommandFailureReason = "Command Invalid"; return -1; } /* Handle Excess Parameters Supplied conditions. */ BusLogic_CommandFailureReason = "Excess Parameters Supplied"; if (ParameterLength > 0) return -1; /* Indicate the command completed successfully. */ BusLogic_CommandFailureReason = NULL; return ReplyBytes; } /* BusLogic_InitializeAddressProbeList initializes the list of I/O Addresses to be probed for potential BusLogic SCSI Host Adapters by interrogating the PCI Configuration Space on PCI machines as well as from the list of standard BusLogic I/O Addresses. */ static void BusLogic_InitializeAddressProbeList(void) { int ProbeAddressCount = 0, StandardAddressIndex = 0; /* If BusLogic_Setup has provided an I/O Address probe list, do not override the Kernel Command Line specifications. */ if (BusLogic_IO_AddressProbeList[0] != 0) return; #ifdef CONFIG_PCI /* Interrogate PCI Configuration Space for any BusLogic SCSI Host Adapters. */ if (pcibios_present()) { unsigned int BusDeviceFunction[BusLogic_IO_MaxProbeAddresses]; unsigned short Index = 0, VendorID, DeviceID; boolean NonIncreasingScanningOrder = false; unsigned char Bus, DeviceFunction; unsigned int BaseAddress0; while (pcibios_find_class(PCI_CLASS_STORAGE_SCSI<<8, Index++, &Bus, &DeviceFunction) == 0) if (pcibios_read_config_word(Bus, DeviceFunction, PCI_VENDOR_ID, &VendorID) == 0 && VendorID == PCI_VENDOR_ID_BUSLOGIC && pcibios_read_config_word(Bus, DeviceFunction, PCI_DEVICE_ID, &DeviceID) == 0 && (DeviceID == PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER || DeviceID == PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER_NC) && pcibios_read_config_dword(Bus, DeviceFunction, PCI_BASE_ADDRESS_0, &BaseAddress0) == 0 && (BaseAddress0 & PCI_BASE_ADDRESS_SPACE) == PCI_BASE_ADDRESS_SPACE_IO) { BusLogic_IO_AddressProbeList[ProbeAddressCount] = BaseAddress0 & PCI_BASE_ADDRESS_IO_MASK; BusDeviceFunction[ProbeAddressCount] = (Bus << 8) | DeviceFunction; if (ProbeAddressCount > 0 && BusDeviceFunction[ProbeAddressCount] < BusDeviceFunction[ProbeAddressCount-1]) NonIncreasingScanningOrder = true; ProbeAddressCount++; } /* If there are multiple BusLogic PCI SCSI Host Adapters present and if they are enumerated by the PCI BIOS in an order other than by strictly increasing Bus Number and Device Number, then interrogate the setting of the AutoSCSI "Use Bus And Device # For PCI Scanning Seq." option. If it is ON, and if the first enumeratedBusLogic Host Adapter is a BT-948/958/958D, then sort the PCI Host Adapter I/O Addresses by increasing Bus Number and Device Number so that the Host Adapters are recognized in the same order by the Linux kernel as by the Host Adapter's BIOS. */ if (ProbeAddressCount > 1 && NonIncreasingScanningOrder && !(BusLogic_ProbeOptions & BusLogic_NoSortPCI)) { BusLogic_HostAdapter_T HostAdapterPrototype; BusLogic_HostAdapter_T *HostAdapter = &HostAdapterPrototype; BusLogic_FetchHostAdapterLocalRAMRequest_T FetchHostAdapterLocalRAMRequest; BusLogic_AutoSCSIByte45_T AutoSCSIByte45; BusLogic_BoardID_T BoardID; HostAdapter->IO_Address = BusLogic_IO_AddressProbeList[0]; FetchHostAdapterLocalRAMRequest.ByteOffset = BusLogic_AutoSCSI_BaseOffset + 45; FetchHostAdapterLocalRAMRequest.ByteCount = sizeof(AutoSCSIByte45); AutoSCSIByte45.ForceBusDeviceScanningOrder = false; BusLogic_Command(HostAdapter, BusLogic_FetchHostAdapterLocalRAM, &FetchHostAdapterLocalRAMRequest, sizeof(FetchHostAdapterLocalRAMRequest), &AutoSCSIByte45, sizeof(AutoSCSIByte45)); BoardID.FirmwareVersion1stDigit = '\0'; BusLogic_Command(HostAdapter, BusLogic_InquireBoardID, NULL, 0, &BoardID, sizeof(BoardID)); if (BoardID.FirmwareVersion1stDigit == '5' && AutoSCSIByte45.ForceBusDeviceScanningOrder) { /* Sort the I/O Addresses such that the corresponding PCI devices are in ascending order by Bus Number and Device Number. */ int LastInterchange = ProbeAddressCount-1, Bound, j; while (LastInterchange > 0) { Bound = LastInterchange; LastInterchange = 0; for (j = 0; j < Bound; j++) if (BusDeviceFunction[j] > BusDeviceFunction[j+1]) { unsigned int Temp; Temp = BusDeviceFunction[j]; BusDeviceFunction[j] = BusDeviceFunction[j+1]; BusDeviceFunction[j+1] = Temp; Temp = BusLogic_IO_AddressProbeList[j]; BusLogic_IO_AddressProbeList[j] = BusLogic_IO_AddressProbeList[j+1]; BusLogic_IO_AddressProbeList[j+1] = Temp; LastInterchange = j; } } } } } #endif /* Append the list of standard BusLogic ISA I/O Addresses. */ if (!(BusLogic_ProbeOptions & BusLogic_NoProbeISA)) while (ProbeAddressCount < BusLogic_IO_MaxProbeAddresses && BusLogic_IO_StandardAddresses[StandardAddressIndex] > 0) BusLogic_IO_AddressProbeList[ProbeAddressCount++] = BusLogic_IO_StandardAddresses[StandardAddressIndex++]; BusLogic_IO_AddressProbeList[ProbeAddressCount] = 0; } /* BusLogic_Failure prints a standardized error message, and then returns false. */ static boolean BusLogic_Failure(BusLogic_HostAdapter_T *HostAdapter, char *ErrorMessage) { BusLogic_AnnounceDriver(); printk("While configuring BusLogic Host Adapter at I/O Address 0x%X:\n", HostAdapter->IO_Address); printk("%s FAILED - DETACHING\n", ErrorMessage); if (BusLogic_CommandFailureReason != NULL) printk("ADDITIONAL FAILURE INFO - %s\n", BusLogic_CommandFailureReason); return false; } /* BusLogic_ProbeHostAdapter probes for a BusLogic Host Adapter. */ static boolean BusLogic_ProbeHostAdapter(BusLogic_HostAdapter_T *HostAdapter) { boolean TraceProbe = (BusLogic_GlobalOptions & BusLogic_TraceProbe); unsigned char StatusRegister, GeometryRegister; /* Read the Status Register to test if there is an I/O port that responds. A nonexistent I/O port will return 0xFF, in which case there is definitely no BusLogic Host Adapter at this base I/O Address. */ StatusRegister = BusLogic_ReadStatusRegister(HostAdapter); if (TraceProbe) printk("BusLogic_Probe(0x%X): Status 0x%02X\n", HostAdapter->IO_Address, StatusRegister); if (StatusRegister == 0xFF) return false; /* Read the undocumented BusLogic Geometry Register to test if there is an I/O port that responds. Adaptec Host Adapters do not implement the Geometry Register, so this test helps serve to avoid incorrectly recognizing an Adaptec 1542A or 1542B as a BusLogic. Unfortunately, the Adaptec 1542C series does respond to the Geometry Register I/O port, but it will be rejected later when the Inquire Extended Setup Information command is issued in BusLogic_CheckHostAdapter. The AMI FastDisk Host Adapter is a BusLogic clone that implements the same interface as earlier BusLogic controllers, including the undocumented commands, and is therefore supported by this driver. However, the AMI FastDisk always returns 0x00 upon reading the Geometry Register, so the extended translation option should always be left disabled on the AMI FastDisk. */ GeometryRegister = BusLogic_ReadGeometryRegister(HostAdapter); if (TraceProbe) printk("BusLogic_Probe(0x%X): Geometry 0x%02X\n", HostAdapter->IO_Address, GeometryRegister); if (GeometryRegister == 0xFF) return false; /* Indicate the Host Adapter Probe completed successfully. */ return true; } /* BusLogic_HardResetHostAdapter issues a Hard Reset to the Host Adapter, and waits for Host Adapter Diagnostics to complete. */ static boolean BusLogic_HardResetHostAdapter(BusLogic_HostAdapter_T *HostAdapter) { boolean TraceHardReset = (BusLogic_GlobalOptions & BusLogic_TraceHardReset); int TimeoutCounter = loops_per_sec; unsigned char StatusRegister = 0; /* Issue a Hard Reset Command to the Host Adapter. The Host Adapter should respond by setting Diagnostic Active in the Status Register. */ BusLogic_WriteControlRegister(HostAdapter, BusLogic_HardReset); /* Wait until Diagnostic Active is set in the Status Register. */ while (--TimeoutCounter >= 0) { StatusRegister = BusLogic_ReadStatusRegister(HostAdapter); if ((StatusRegister & BusLogic_DiagnosticActive)) break; } if (TraceHardReset) printk("BusLogic_HardReset(0x%X): Diagnostic Active, Status 0x%02X\n", HostAdapter->IO_Address, StatusRegister); if (TimeoutCounter < 0) return false; /* Wait 100 microseconds to allow completion of any initial diagnostic activity which might leave the contents of the Status Register unpredictable. */ udelay(100); /* Wait until Diagnostic Active is reset in the Status Register. */ while (--TimeoutCounter >= 0) { StatusRegister = BusLogic_ReadStatusRegister(HostAdapter); if (!(StatusRegister & BusLogic_DiagnosticActive)) break; } if (TraceHardReset) printk("BusLogic_HardReset(0x%X): Diagnostic Completed, Status 0x%02X\n", HostAdapter->IO_Address, StatusRegister); if (TimeoutCounter < 0) return false; /* Wait until at least one of the Diagnostic Failure, Host Adapter Ready, or Data In Register Ready bits is set in the Status Register. */ while (--TimeoutCounter >= 0) { StatusRegister = BusLogic_ReadStatusRegister(HostAdapter); if (StatusRegister & (BusLogic_DiagnosticFailure | BusLogic_HostAdapterReady | BusLogic_DataInRegisterReady)) break; } if (TraceHardReset) printk("BusLogic_HardReset(0x%X): Host Adapter Ready, Status 0x%02X\n", HostAdapter->IO_Address, StatusRegister); if (TimeoutCounter < 0) return false; /* If Diagnostic Failure is set or Host Adapter Ready is reset, then an error occurred during the Host Adapter diagnostics. If Data In Register Ready is set, then there is an Error Code available. */ if ((StatusRegister & BusLogic_DiagnosticFailure) || !(StatusRegister & BusLogic_HostAdapterReady)) { BusLogic_CommandFailureReason = NULL; BusLogic_Failure(HostAdapter, "HARD RESET DIAGNOSTICS"); printk("HOST ADAPTER STATUS REGISTER = %02X\n", StatusRegister); if (StatusRegister & BusLogic_DataInRegisterReady) { unsigned char ErrorCode = BusLogic_ReadDataInRegister(HostAdapter); printk("HOST ADAPTER ERROR CODE = %d\n", ErrorCode); } return false; } /* Indicate the Host Adapter Hard Reset completed successfully. */ return true; } /* BusLogic_CheckHostAdapter checks to be sure this really is a BusLogic Host Adapter. */ static boolean BusLogic_CheckHostAdapter(BusLogic_HostAdapter_T *HostAdapter) { BusLogic_ExtendedSetupInformation_T ExtendedSetupInformation; BusLogic_RequestedReplyLength_T RequestedReplyLength; unsigned long ProcessorFlags; int Result; /* Issue the Inquire Extended Setup Information command. Only genuine BusLogic Host Adapters and true clones support this command. Adaptec 1542C series Host Adapters that respond to the Geometry Register I/O port will fail this command. Interrupts must be disabled around the call to BusLogic_Command since a Command Complete interrupt could occur if the IRQ Channel was previously enabled for another BusLogic Host Adapter sharing the same IRQ Channel. */ save_flags(ProcessorFlags); cli(); RequestedReplyLength = sizeof(ExtendedSetupInformation); Result = BusLogic_Command(HostAdapter, BusLogic_InquireExtendedSetupInformation, &RequestedReplyLength, sizeof(RequestedReplyLength), &ExtendedSetupInformation, sizeof(ExtendedSetupInformation)); restore_flags(ProcessorFlags); if (BusLogic_GlobalOptions & BusLogic_TraceProbe) printk("BusLogic_Check(0x%X): Result %d\n", HostAdapter->IO_Address, Result); return (Result == sizeof(ExtendedSetupInformation)); } /* BusLogic_ReadHostAdapterConfiguration reads the Configuration Information from Host Adapter. */ static boolean BusLogic_ReadHostAdapterConfiguration(BusLogic_HostAdapter_T *HostAdapter) { BusLogic_BoardID_T BoardID; BusLogic_Configuration_T Configuration; BusLogic_SetupInformation_T SetupInformation; BusLogic_ExtendedSetupInformation_T ExtendedSetupInformation; BusLogic_ControllerModelNumber_T ControllerModelNumber; BusLogic_FirmwareVersion3rdDigit_T FirmwareVersion3rdDigit; BusLogic_FirmwareVersionLetter_T FirmwareVersionLetter; BusLogic_GenericIOPortInformation_T GenericIOPortInformation; BusLogic_FetchHostAdapterLocalRAMRequest_T FetchHostAdapterLocalRAMRequest; BusLogic_AutoSCSIByte15_T AutoSCSIByte15; BusLogic_RequestedReplyLength_T RequestedReplyLength; unsigned char GeometryRegister, *TargetPointer, Character; unsigned short AllTargetsMask, DisconnectPermitted; unsigned short TaggedQueuingPermitted, TaggedQueuingPermittedDefault; boolean CommonErrorRecovery; int TargetID, i; /* Issue the Inquire Board ID command. */ if (BusLogic_Command(HostAdapter, BusLogic_InquireBoardID, NULL, 0, &BoardID, sizeof(BoardID)) != sizeof(BoardID)) return BusLogic_Failure(HostAdapter, "INQUIRE BOARD ID"); /* Issue the Inquire Configuration command. */ if (BusLogic_Command(HostAdapter, BusLogic_InquireConfiguration, NULL, 0, &Configuration, sizeof(Configuration)) != sizeof(Configuration)) return BusLogic_Failure(HostAdapter, "INQUIRE CONFIGURATION"); /* Issue the Inquire Setup Information command. */ RequestedReplyLength = sizeof(SetupInformation); if (BusLogic_Command(HostAdapter, BusLogic_InquireSetupInformation, &RequestedReplyLength, sizeof(RequestedReplyLength), &SetupInformation, sizeof(SetupInformation)) != sizeof(SetupInformation)) return BusLogic_Failure(HostAdapter, "INQUIRE SETUP INFORMATION"); /* Issue the Inquire Extended Setup Information command. */ RequestedReplyLength = sizeof(ExtendedSetupInformation); if (BusLogic_Command(HostAdapter, BusLogic_InquireExtendedSetupInformation, &RequestedReplyLength, sizeof(RequestedReplyLength), &ExtendedSetupInformation, sizeof(ExtendedSetupInformation)) != sizeof(ExtendedSetupInformation)) return BusLogic_Failure(HostAdapter, "INQUIRE EXTENDED SETUP INFORMATION"); /* Issue the Inquire Controller Model Number command. */ if (ExtendedSetupInformation.BusType == 'A' && BoardID.FirmwareVersion1stDigit == '2') /* BusLogic BT-542B ISA 2.xx */ strcpy(ControllerModelNumber, "542B"); else if (ExtendedSetupInformation.BusType == 'E' && BoardID.FirmwareVersion1stDigit == '0') /* AMI FastDisk EISA Series 441 0.x */ strcpy(ControllerModelNumber, "747A"); else { RequestedReplyLength = sizeof(ControllerModelNumber); if (BusLogic_Command(HostAdapter, BusLogic_InquireControllerModelNumber, &RequestedReplyLength, sizeof(RequestedReplyLength), &ControllerModelNumber, sizeof(ControllerModelNumber)) != sizeof(ControllerModelNumber)) return BusLogic_Failure(HostAdapter, "INQUIRE CONTROLLER MODEL NUMBER"); } /* Issue the Inquire Firmware Version 3rd Digit command. */ FirmwareVersion3rdDigit = '\0'; if (BoardID.FirmwareVersion1stDigit > '0') if (BusLogic_Command(HostAdapter, BusLogic_InquireFirmwareVersion3rdDigit, NULL, 0, &FirmwareVersion3rdDigit, sizeof(FirmwareVersion3rdDigit)) != sizeof(FirmwareVersion3rdDigit)) return BusLogic_Failure(HostAdapter, "INQUIRE FIRMWARE 3RD DIGIT"); /* BusLogic Host Adapters can be identified by their model number and the major version number of their firmware as follows: 5.xx BusLogic "W" Series Host Adapters: BT-948/958/958D 4.xx BusLogic "C" Series Host Adapters: BT-946C/956C/956CD/747C/757C/757CD/445C/545C/540CF 3.xx BusLogic "S" Series Host Adapters: BT-747S/747D/757S/757D/445S/545S/542D BT-542B/742A (revision H) 2.xx BusLogic "A" Series Host Adapters: BT-542B/742A (revision G and below) 0.xx AMI FastDisk VLB/EISA BusLogic Clone Host Adapter */ /* Save the Model Name and Controller Name in the Host Adapter structure. */ TargetPointer = HostAdapter->ModelName; *TargetPointer++ = 'B'; *TargetPointer++ = 'T'; *TargetPointer++ = '-'; for (i = 0; i < sizeof(ControllerModelNumber); i++) { Character = ControllerModelNumber[i]; if (Character == ' ' || Character == '\0') break; *TargetPointer++ = Character; } *TargetPointer++ = '\0'; strcpy(HostAdapter->ControllerName, "BusLogic "); strcat(HostAdapter->ControllerName, HostAdapter->ModelName); strcpy(HostAdapter->InterruptLabel, HostAdapter->ControllerName); /* Save the Firmware Version in the Host Adapter structure. */ TargetPointer = HostAdapter->FirmwareVersion; *TargetPointer++ = BoardID.FirmwareVersion1stDigit; *TargetPointer++ = '.'; *TargetPointer++ = BoardID.FirmwareVersion2ndDigit; if (FirmwareVersion3rdDigit != ' ' && FirmwareVersion3rdDigit != '\0') *TargetPointer++ = FirmwareVersion3rdDigit; *TargetPointer = '\0'; /* Issue the Inquire Firmware Version Letter command. */ if (strcmp(HostAdapter->FirmwareVersion, "3.3") >= 0) { if (BusLogic_Command(HostAdapter, BusLogic_InquireFirmwareVersionLetter, NULL, 0, &FirmwareVersionLetter, sizeof(FirmwareVersionLetter)) != sizeof(FirmwareVersionLetter)) return BusLogic_Failure(HostAdapter, "INQUIRE FIRMWARE VERSION LETTER"); if (FirmwareVersionLetter != ' ' && FirmwareVersionLetter != '\0') *TargetPointer++ = FirmwareVersionLetter; *TargetPointer = '\0'; } /* Issue the Inquire Generic I/O Port Information command to read the IRQ Channel from all PCI Host Adapters, and the Termination Information from "W" Series Host Adapters. */ if (HostAdapter->ModelName[3] == '9' && strcmp(HostAdapter->FirmwareVersion, "4.25") >= 0) { if (BusLogic_Command(HostAdapter, BusLogic_InquireGenericIOPortInformation, NULL, 0, &GenericIOPortInformation, sizeof(GenericIOPortInformation)) != sizeof(GenericIOPortInformation)) return BusLogic_Failure(HostAdapter, "INQUIRE GENERIC I/O PORT INFORMATION"); /* Save the IRQ Channel in the Host Adapter structure. */ HostAdapter->IRQ_Channel = GenericIOPortInformation.PCIAssignedIRQChannel; /* Save the Termination Information in the Host Adapter structure. */ if (HostAdapter->FirmwareVersion[0] == '5' && GenericIOPortInformation.Valid) { HostAdapter->TerminationInfoValid = true; HostAdapter->LowByteTerminated = GenericIOPortInformation.LowByteTerminated; HostAdapter->HighByteTerminated = GenericIOPortInformation.HighByteTerminated; } } /* Issue the Fetch Host Adapter Local RAM command to read the Termination Information from the AutoSCSI area of "C" Series Host Adapters. */ if (HostAdapter->FirmwareVersion[0] == '4') { FetchHostAdapterLocalRAMRequest.ByteOffset = BusLogic_AutoSCSI_BaseOffset + 15; FetchHostAdapterLocalRAMRequest.ByteCount = sizeof(AutoSCSIByte15); if (BusLogic_Command(HostAdapter, BusLogic_FetchHostAdapterLocalRAM, &FetchHostAdapterLocalRAMRequest, sizeof(FetchHostAdapterLocalRAMRequest), &AutoSCSIByte15, sizeof(AutoSCSIByte15)) != sizeof(AutoSCSIByte15)) return BusLogic_Failure(HostAdapter, "FETCH HOST ADAPTER LOCAL RAM"); /* Save the Termination Information in the Host Adapter structure. */ HostAdapter->TerminationInfoValid = true; HostAdapter->LowByteTerminated = AutoSCSIByte15.LowByteTerminated; HostAdapter->HighByteTerminated = AutoSCSIByte15.HighByteTerminated; } /* Determine the IRQ Channel and save it in the Host Adapter structure. */ if (HostAdapter->IRQ_Channel == 0) { if (Configuration.IRQ_Channel9) HostAdapter->IRQ_Channel = 9; else if (Configuration.IRQ_Channel10) HostAdapter->IRQ_Channel = 10; else if (Configuration.IRQ_Channel11) HostAdapter->IRQ_Channel = 11; else if (Configuration.IRQ_Channel12) HostAdapter->IRQ_Channel = 12; else if (Configuration.IRQ_Channel14) HostAdapter->IRQ_Channel = 14; else if (Configuration.IRQ_Channel15) HostAdapter->IRQ_Channel = 15; } /* Save the Host Adapter SCSI ID in the Host Adapter structure. */ HostAdapter->SCSI_ID = Configuration.HostAdapterID; /* Save the Synchronous Initiation flag and SCSI Parity Checking flag in the Host Adapter structure. */ HostAdapter->SynchronousInitiation = SetupInformation.SynchronousInitiationEnabled; HostAdapter->ParityChecking = SetupInformation.ParityCheckEnabled; /* Determine the Bus Type and save it in the Host Adapter structure, and determine and save the DMA Channel for ISA Host Adapters. */ switch (HostAdapter->ModelName[3]) { case '4': HostAdapter->BusType = BusLogic_VESA_Bus; break; case '5': HostAdapter->BusType = BusLogic_ISA_Bus; if (Configuration.DMA_Channel5) HostAdapter->DMA_Channel = 5; else if (Configuration.DMA_Channel6) HostAdapter->DMA_Channel = 6; else if (Configuration.DMA_Channel7) HostAdapter->DMA_Channel = 7; break; case '6': HostAdapter->BusType = BusLogic_MCA_Bus; break; case '7': HostAdapter->BusType = BusLogic_EISA_Bus; break; case '9': HostAdapter->BusType = BusLogic_PCI_Bus; break; } /* Determine whether Extended Translation is enabled and save it in the Host Adapter structure. */ GeometryRegister = BusLogic_ReadGeometryRegister(HostAdapter); if (GeometryRegister & BusLogic_ExtendedTranslationEnabled) HostAdapter->ExtendedTranslation = true; /* Save the Disconnect/Reconnect Permitted flag bits in the Host Adapter structure. The Disconnect Permitted information is only valid on "W" and "C" Series controllers, but Disconnect/Reconnect is always permitted on "S" and "A" Series controllers. */ if (HostAdapter->FirmwareVersion[0] >= '4') HostAdapter->DisconnectPermitted = (SetupInformation.DisconnectPermittedID8to15 << 8) | SetupInformation.DisconnectPermittedID0to7; else HostAdapter->DisconnectPermitted = 0xFF; /* Save the Scatter Gather Limits, Level Sensitive Interrupts flag, Wide SCSI flag, Differential SCSI flag, Automatic Configuration flag, and Ultra SCSI flag in the Host Adapter structure. */ HostAdapter->HostAdapterScatterGatherLimit = ExtendedSetupInformation.ScatterGatherLimit; HostAdapter->DriverScatterGatherLimit = HostAdapter->HostAdapterScatterGatherLimit; if (HostAdapter->HostAdapterScatterGatherLimit > BusLogic_ScatterGatherLimit) HostAdapter->DriverScatterGatherLimit = BusLogic_ScatterGatherLimit; if (ExtendedSetupInformation.Misc.LevelSensitiveInterrupts) HostAdapter->LevelSensitiveInterrupts = true; HostAdapter->HostWideSCSI = ExtendedSetupInformation.HostWideSCSI; HostAdapter->HostDifferentialSCSI = ExtendedSetupInformation.HostDifferentialSCSI; HostAdapter->HostAutomaticConfiguration = ExtendedSetupInformation.HostAutomaticConfiguration; HostAdapter->HostUltraSCSI = ExtendedSetupInformation.HostUltraSCSI; /* Determine whether 64 LUN Format CCBs are supported and save the information in the Host Adapter structure. */ if (HostAdapter->FirmwareVersion[0] == '5' || (HostAdapter->FirmwareVersion[0] == '4' && HostAdapter->HostWideSCSI)) HostAdapter->Host64LUNSupport = true; /* Determine the Host Adapter BIOS Address if the BIOS is enabled and save it in the Host Adapter structure. The BIOS is disabled if the BIOS_Address is 0. */ HostAdapter->BIOS_Address = ExtendedSetupInformation.BIOS_Address << 12; /* ISA Host Adapters require Bounce Buffers if there is more than 16MB memory. */ if (HostAdapter->BusType == BusLogic_ISA_Bus && high_memory > (void *) MAX_DMA_ADDRESS) HostAdapter->BounceBuffersRequired = true; /* BusLogic BT-445S Host Adapters prior to controller revision E have a hardware bug whereby when the BIOS is enabled, transfers to/from the same address range the BIOS occupies modulo 16MB are handled incorrectly. Only properly functioning BT-445S controllers have firmware version 3.37, so we require that ISA Bounce Buffers be used for the buggy BT-445S models if there is more than 16MB memory. */ if (HostAdapter->BIOS_Address > 0 && strcmp(HostAdapter->ModelName, "BT-445S") == 0 && strcmp(HostAdapter->FirmwareVersion, "3.37") < 0 && high_memory > (void *) MAX_DMA_ADDRESS) HostAdapter->BounceBuffersRequired = true; /* Determine the maximum number of Target IDs and Logical Units supported by this driver for Wide and Narrow Host Adapters. */ HostAdapter->MaxTargetDevices = (HostAdapter->HostWideSCSI ? 16 : 8); HostAdapter->MaxLogicalUnits = (HostAdapter->Host64LUNSupport ? 64 : 8); /* Select appropriate values for the Mailbox Count, Initial CCBs, and Incremental CCBs variables based on whether or not Strict Round Robin Mode is supported. If Strict Round Robin Mode is supported, then there is no performance degradation in using the maximum possible number of Outgoing and Incoming Mailboxes and allowing the Tagged and Untagged Queue Depths to determine the actual utilization. If Strict Round Robin Mode is not supported, then the Host Adapter must scan all the Outgoing Mailboxes whenever an Outgoing Mailbox entry is made, which can cause a substantial performance penalty. The Host Adapters actually have room to store the following number of CCBs internally; that is, they can internally queue and manage this many active commands on the SCSI bus simultaneously. Performance measurements demonstrate that the Mailbox Count should be set to the maximum possible, rather than the internal CCB capacity, as it is more efficient to have the queued commands waiting in Outgoing Mailboxes if necessary than to block the process in the higher levels of the SCSI Subsystem. 192 BT-948/958/958D 100 BT-946C/956C/956CD/747C/757C/757CD/445C 50 BT-545C/540CF 30 BT-747S/747D/757S/757D/445S/545S/542D/542B/742A */ if (strcmp(HostAdapter->FirmwareVersion, "3.31") >= 0) { HostAdapter->StrictRoundRobinModeSupport = true; HostAdapter->MailboxCount = 255; HostAdapter->InitialCCBs = 64; HostAdapter->IncrementalCCBs = 32; } else { HostAdapter->StrictRoundRobinModeSupport = false; HostAdapter->MailboxCount = 32; HostAdapter->InitialCCBs = 32; HostAdapter->IncrementalCCBs = 4; } if (HostAdapter->FirmwareVersion[0] == '5') HostAdapter->TotalQueueDepth = 192; else if (HostAdapter->FirmwareVersion[0] == '4') HostAdapter->TotalQueueDepth = (HostAdapter->BusType != BusLogic_ISA_Bus ? 100 : 50); else HostAdapter->TotalQueueDepth = 30; /* Select an appropriate value for the Tagged Queue Depth either from a Command Line Entry, or based on whether this Host Adapter requires that ISA Bounce Buffers be used. The Tagged Queue Depth is left at 0 for automatic determination in BusLogic_SelectQueueDepths. Initialize the Untagged Queue Depth. */ if (HostAdapter->CommandLineEntry != NULL && HostAdapter->CommandLineEntry->TaggedQueueDepth > 0) HostAdapter->TaggedQueueDepth = HostAdapter->CommandLineEntry->TaggedQueueDepth; else if (HostAdapter->BounceBuffersRequired) HostAdapter->TaggedQueueDepth = BusLogic_TaggedQueueDepth_BB; else HostAdapter->TaggedQueueDepth = 0; HostAdapter->UntaggedQueueDepth = BusLogic_UntaggedQueueDepth; if (HostAdapter->UntaggedQueueDepth > HostAdapter->TaggedQueueDepth && HostAdapter->TaggedQueueDepth > 0) HostAdapter->UntaggedQueueDepth = HostAdapter->TaggedQueueDepth; /* Select an appropriate value for Bus Settle Time either from a Command Line Entry, or from BusLogic_DefaultBusSettleTime. */ if (HostAdapter->CommandLineEntry != NULL && HostAdapter->CommandLineEntry->BusSettleTime > 0) HostAdapter->BusSettleTime = HostAdapter->CommandLineEntry->BusSettleTime; else HostAdapter->BusSettleTime = BusLogic_DefaultBusSettleTime; /* Select an appropriate value for Local Options from a Command Line Entry. */ if (HostAdapter->CommandLineEntry != NULL) HostAdapter->LocalOptions = HostAdapter->CommandLineEntry->LocalOptions; /* Select appropriate values for the Error Recovery Strategy array either from a Command Line Entry, or using BusLogic_ErrorRecovery_Default. */ if (HostAdapter->CommandLineEntry != NULL) memcpy(HostAdapter->ErrorRecoveryStrategy, HostAdapter->CommandLineEntry->ErrorRecoveryStrategy, sizeof(HostAdapter->ErrorRecoveryStrategy)); else memset(HostAdapter->ErrorRecoveryStrategy, BusLogic_ErrorRecovery_Default, sizeof(HostAdapter->ErrorRecoveryStrategy)); /* Tagged Queuing support is available and operates properly on all "W" Series controllers, on "C" Series controllers with firmware version 4.22 and above, and on "S" Series controllers with firmware version 3.35 and above. Tagged Queuing is disabled by default when the Tagged Queue Depth is 1 since queuing multiple commands is not possible. */ TaggedQueuingPermittedDefault = 0; if (HostAdapter->TaggedQueueDepth != 1) switch (HostAdapter->FirmwareVersion[0]) { case '5': TaggedQueuingPermittedDefault = 0xFFFF; break; case '4': if (strcmp(HostAdapter->FirmwareVersion, "4.22") >= 0) TaggedQueuingPermittedDefault = 0xFFFF; break; case '3': if (strcmp(HostAdapter->FirmwareVersion, "3.35") >= 0) TaggedQueuingPermittedDefault = 0xFFFF; break; } /* Tagged Queuing is only useful if Disconnect/Reconnect is permitted. Therefore, mask the Tagged Queuing Permitted Default bits with the Disconnect/Reconnect Permitted bits. */ TaggedQueuingPermittedDefault &= HostAdapter->DisconnectPermitted; /* Combine the default Tagged Queuing Permitted bits with any Command Line Entry Tagged Queuing specification. */ if (HostAdapter->CommandLineEntry != NULL) HostAdapter->TaggedQueuingPermitted = (HostAdapter->CommandLineEntry->TaggedQueuingPermitted & HostAdapter->CommandLineEntry->TaggedQueuingPermittedMask) | (TaggedQueuingPermittedDefault & ~HostAdapter->CommandLineEntry->TaggedQueuingPermittedMask); else HostAdapter->TaggedQueuingPermitted = TaggedQueuingPermittedDefault; /* Announce the Host Adapter Configuration. */ printk("scsi%d: Configuring BusLogic Model %s %s%s%s%s SCSI Host Adapter\n", HostAdapter->HostNumber, HostAdapter->ModelName, BusLogic_BusNames[HostAdapter->BusType], (HostAdapter->HostWideSCSI ? " Wide" : ""), (HostAdapter->HostDifferentialSCSI ? " Differential" : ""), (HostAdapter->HostUltraSCSI ? " Ultra" : "")); printk("scsi%d: Firmware Version: %s, I/O Address: 0x%X, " "IRQ Channel: %d/%s\n", HostAdapter->HostNumber, HostAdapter->FirmwareVersion, HostAdapter->IO_Address, HostAdapter->IRQ_Channel, (HostAdapter->LevelSensitiveInterrupts ? "Level" : "Edge")); printk("scsi%d: DMA Channel: ", HostAdapter->HostNumber); if (HostAdapter->DMA_Channel > 0) printk("%d, ", HostAdapter->DMA_Channel); else printk("None, "); if (HostAdapter->BIOS_Address > 0) printk("BIOS Address: 0x%X, ", HostAdapter->BIOS_Address); else printk("BIOS Address: None, "); printk("Host Adapter SCSI ID: %d\n", HostAdapter->SCSI_ID); printk("scsi%d: Scatter/Gather Limit: %d of %d segments, " "Parity Checking: %s\n", HostAdapter->HostNumber, HostAdapter->DriverScatterGatherLimit, HostAdapter->HostAdapterScatterGatherLimit, (HostAdapter->ParityChecking ? "Enabled" : "Disabled")); printk("scsi%d: Synchronous Initiation: %s, " "Extended Disk Translation: %s\n", HostAdapter->HostNumber, (HostAdapter->SynchronousInitiation ? "Enabled" : "Disabled"), (HostAdapter->ExtendedTranslation ? "Enabled" : "Disabled")); AllTargetsMask = (1 << HostAdapter->MaxTargetDevices) - 1; DisconnectPermitted = HostAdapter->DisconnectPermitted & AllTargetsMask; printk("scsi%d: Disconnect/Reconnect: ", HostAdapter->HostNumber); if (DisconnectPermitted == 0) printk("Disabled"); else if (DisconnectPermitted == AllTargetsMask) printk("Enabled"); else for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++) printk("%c", (DisconnectPermitted & (1 << TargetID)) ? 'Y' : 'N'); printk(", Tagged Queuing: "); TaggedQueuingPermitted = HostAdapter->TaggedQueuingPermitted & AllTargetsMask; if (TaggedQueuingPermitted == 0) printk("Disabled"); else if (TaggedQueuingPermitted == AllTargetsMask) printk("Enabled"); else for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++) printk("%c", (TaggedQueuingPermitted & (1 << TargetID)) ? 'Y' : 'N'); printk("\n"); printk("scsi%d: Total Queue Depth: %d, Mailboxes: %d, Initial CCBs: %d\n", HostAdapter->HostNumber, HostAdapter->TotalQueueDepth, HostAdapter->MailboxCount, HostAdapter->InitialCCBs); printk("scsi%d: Tagged Queue Depth: ", HostAdapter->HostNumber); if (HostAdapter->TaggedQueueDepth > 0) printk("%d", HostAdapter->TaggedQueueDepth); else printk("Automatic"); printk(", Untagged Queue Depth: %d\n", HostAdapter->UntaggedQueueDepth); if (HostAdapter->TerminationInfoValid) if (HostAdapter->HostWideSCSI) printk("scsi%d: Host Adapter SCSI Bus Termination (Low/High): %s/%s\n", HostAdapter->HostNumber, (HostAdapter->LowByteTerminated ? "Enabled" : "Disabled"), (HostAdapter->HighByteTerminated ? "Enabled" : "Disabled")); else printk("scsi%d: Host Adapter SCSI Bus Termination: %s\n", HostAdapter->HostNumber, (HostAdapter->LowByteTerminated ? "Enabled" : "Disabled")); CommonErrorRecovery = true; for (TargetID = 1; TargetID < HostAdapter->MaxTargetDevices; TargetID++) if (HostAdapter->ErrorRecoveryStrategy[TargetID] != HostAdapter->ErrorRecoveryStrategy[0]) { CommonErrorRecovery = false; break; } printk("scsi%d: Error Recovery Strategy: ", HostAdapter->HostNumber); if (CommonErrorRecovery) printk("%s", BusLogic_ErrorRecoveryStrategyNames[ HostAdapter->ErrorRecoveryStrategy[0]]); else for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++) printk("%s", BusLogic_ErrorRecoveryStrategyLetters[ HostAdapter->ErrorRecoveryStrategy[TargetID]]); printk("\n"); /* Indicate reading the Host Adapter Configuration completed successfully. */ return true; } /* BusLogic_AcquireResources acquires the system resources necessary to use Host Adapter. */ static boolean BusLogic_AcquireResources(BusLogic_HostAdapter_T *HostAdapter) { if (HostAdapter->IRQ_Channel == 0) { printk("scsi%d: NO INTERRUPT CHANNEL ASSIGNED - DETACHING\n", HostAdapter->HostNumber); return false; } /* Acquire exclusive or shared access to the IRQ Channel. A usage count is maintained so that PCI, EISA, or MCA shared interrupts can be supported. */ if (BusLogic_IRQ_UsageCount[HostAdapter->IRQ_Channel]++ == 0) { if (request_irq(HostAdapter->IRQ_Channel, BusLogic_InterruptHandler, SA_INTERRUPT | SA_SHIRQ, HostAdapter->InterruptLabel, NULL) < 0) { BusLogic_IRQ_UsageCount[HostAdapter->IRQ_Channel]--; printk("scsi%d: UNABLE TO ACQUIRE IRQ CHANNEL %d - DETACHING\n", HostAdapter->HostNumber, HostAdapter->IRQ_Channel); return false; } } else { BusLogic_HostAdapter_T *FirstHostAdapter = BusLogic_RegisteredHostAdapters; while (FirstHostAdapter != NULL) { if (FirstHostAdapter->IRQ_Channel == HostAdapter->IRQ_Channel) { if (strlen(FirstHostAdapter->InterruptLabel) + 11 < sizeof(FirstHostAdapter->InterruptLabel)) { strcat(FirstHostAdapter->InterruptLabel, " + "); strcat(FirstHostAdapter->InterruptLabel, HostAdapter->ModelName); } break; } FirstHostAdapter = FirstHostAdapter->Next; } } HostAdapter->IRQ_ChannelAcquired = true; /* Acquire exclusive access to the DMA Channel. */ if (HostAdapter->DMA_Channel > 0) { if (request_dma(HostAdapter->DMA_Channel, HostAdapter->ControllerName) < 0) { printk("scsi%d: UNABLE TO ACQUIRE DMA CHANNEL %d - DETACHING\n", HostAdapter->HostNumber, HostAdapter->DMA_Channel); return false; } set_dma_mode(HostAdapter->DMA_Channel, DMA_MODE_CASCADE); enable_dma(HostAdapter->DMA_Channel); HostAdapter->DMA_ChannelAcquired = true; } /* Indicate the System Resource Acquisition completed successfully, */ return true; } /* BusLogic_ReleaseResources releases any system resources previously acquired by BusLogic_AcquireResources. */ static void BusLogic_ReleaseResources(BusLogic_HostAdapter_T *HostAdapter) { /* Release exclusive or shared access to the IRQ Channel. */ if (HostAdapter->IRQ_ChannelAcquired) if (--BusLogic_IRQ_UsageCount[HostAdapter->IRQ_Channel] == 0) free_irq(HostAdapter->IRQ_Channel, NULL); /* Release exclusive access to the DMA Channel. */ if (HostAdapter->DMA_ChannelAcquired) free_dma(HostAdapter->DMA_Channel); } /* BusLogic_TestInterrupts tests for proper functioning of the Host Adapter Interrupt Register and that interrupts generated by the Host Adapter are getting through to the Interrupt Handler. A large proportion of initial problems with installing PCI Host Adapters are due to configuration problems where either the Host Adapter or Motherboard is configured incorrectly, and interrupts do not get through as a result. */ static boolean BusLogic_TestInterrupts(BusLogic_HostAdapter_T *HostAdapter) { unsigned int InitialInterruptCount, FinalInterruptCount; int TestCount = 5, i; InitialInterruptCount = kstat.interrupts[HostAdapter->IRQ_Channel]; /* Issue the Test Command Complete Interrupt commands. */ for (i = 0; i < TestCount; i++) BusLogic_Command(HostAdapter, BusLogic_TestCommandCompleteInterrupt, NULL, 0, NULL, 0); /* Verify that BusLogic_InterruptHandler was called at least TestCount times. Shared IRQ Channels could cause more than TestCount interrupts to occur, but there should never be fewer than TestCount. */ FinalInterruptCount = kstat.interrupts[HostAdapter->IRQ_Channel]; if (FinalInterruptCount < InitialInterruptCount + TestCount) { BusLogic_Failure(HostAdapter, "HOST ADAPTER INTERRUPT TEST"); printk("\n\ Interrupts are not getting through from the Host Adapter to the BusLogic\n\ Driver Interrupt Handler. The most likely cause is that either the Host\n\ Adapter or Motherboard is configured incorrectly. Please check the Host\n\ Adapter configuration with AutoSCSI or by examining any dip switch and\n\ jumper settings on the Host Adapter, and verify that no other device is\n\ attempting to use the same IRQ Channel. For PCI Host Adapters, it may also\n\ be necessary to investigate and manually set the PCI interrupt assignments\n\ and edge/level interrupt type selection in the BIOS Setup Program or with\n\ Motherboard jumpers.\n\n"); return false; } /* Indicate the Host Adapter Interrupt Test completed successfully. */ return true; } /* BusLogic_InitializeHostAdapter initializes Host Adapter. This is the only function called during SCSI Host Adapter detection which modifies the state of the Host Adapter from its initial power on or hard reset state. */ static boolean BusLogic_InitializeHostAdapter(BusLogic_HostAdapter_T *HostAdapter) { BusLogic_ExtendedMailboxRequest_T ExtendedMailboxRequest; BusLogic_RoundRobinModeRequest_T RoundRobinModeRequest; BusLogic_SetCCBFormatRequest_T SetCCBFormatRequest; BusLogic_ModifyIOAddressRequest_T ModifyIOAddressRequest; int TargetID; /* Initialize the Bus Device Reset Pending CCB, Tagged Queuing Active, Command Successful Flag, Active Command Count, and Total Command Count for each Target Device. */ for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++) HostAdapter->BusDeviceResetPendingCCB[TargetID] = NULL; memset(HostAdapter->TaggedQueuingActive, false, sizeof(HostAdapter->TaggedQueuingActive)); memset(HostAdapter->CommandSuccessfulFlag, false, sizeof(HostAdapter->CommandSuccessfulFlag)); memset(HostAdapter->ActiveCommandCount, 0, sizeof(HostAdapter->ActiveCommandCount)); memset(HostAdapter->TotalCommandCount, 0, sizeof(HostAdapter->TotalCommandCount)); /* Initialize the Outgoing and Incoming Mailbox structures. */ memset(HostAdapter->FirstOutgoingMailbox, 0, HostAdapter->MailboxCount * sizeof(BusLogic_OutgoingMailbox_T)); memset(HostAdapter->FirstIncomingMailbox, 0, HostAdapter->MailboxCount * sizeof(BusLogic_IncomingMailbox_T)); /* Initialize the pointers to the Next Mailboxes. */ HostAdapter->NextOutgoingMailbox = HostAdapter->FirstOutgoingMailbox; HostAdapter->NextIncomingMailbox = HostAdapter->FirstIncomingMailbox; /* Initialize the Host Adapter's Pointer to the Outgoing/Incoming Mailboxes. */ ExtendedMailboxRequest.MailboxCount = HostAdapter->MailboxCount; ExtendedMailboxRequest.BaseMailboxAddress = Virtual_to_Bus(HostAdapter->FirstOutgoingMailbox); if (BusLogic_Command(HostAdapter, BusLogic_InitializeExtendedMailbox, &ExtendedMailboxRequest, sizeof(ExtendedMailboxRequest), NULL, 0) < 0) return BusLogic_Failure(HostAdapter, "MAILBOX INITIALIZATION"); /* Enable Strict Round Robin Mode if supported by the Host Adapter. In Strict Round Robin Mode, the Host Adapter only looks at the next Outgoing Mailbox for each new command, rather than scanning through all the Outgoing Mailboxes to find any that have new commands in them. Strict Round Robin Mode is significantly more efficient. */ if (HostAdapter->StrictRoundRobinModeSupport) { RoundRobinModeRequest = BusLogic_StrictRoundRobinMode; if (BusLogic_Command(HostAdapter, BusLogic_EnableStrictRoundRobinMode, &RoundRobinModeRequest, sizeof(RoundRobinModeRequest), NULL, 0) < 0) return BusLogic_Failure(HostAdapter, "ENABLE STRICT ROUND ROBIN MODE"); } /* For Host Adapters that support 64 LUN Format CCBs, issue the Set CCB Format command to allow 64 Logical Units per Target Device. */ if (HostAdapter->Host64LUNSupport) { SetCCBFormatRequest = BusLogic_64LUNFormatCCB; if (BusLogic_Command(HostAdapter, BusLogic_SetCCBFormat, &SetCCBFormatRequest, sizeof(SetCCBFormatRequest), NULL, 0) < 0) return BusLogic_Failure(HostAdapter, "SET CCB FORMAT"); } /* For PCI Host Adapters being accessed through the PCI compliant I/O Address, disable the ISA compatible I/O Address to avoid detecting the same Host Adapter at both I/O Addresses. */ if (HostAdapter->BusType == BusLogic_PCI_Bus) { int Index; for (Index = 0; BusLogic_IO_StandardAddresses[Index] > 0; Index++) if (HostAdapter->IO_Address == BusLogic_IO_StandardAddresses[Index]) break; if (BusLogic_IO_StandardAddresses[Index] == 0) { ModifyIOAddressRequest = BusLogic_ModifyIO_Disable; if (BusLogic_Command(HostAdapter, BusLogic_ModifyIOAddress, &ModifyIOAddressRequest, sizeof(ModifyIOAddressRequest), NULL, 0) < 0) return BusLogic_Failure(HostAdapter, "MODIFY I/O ADDRESS"); } } /* Announce Successful Initialization. */ printk("scsi%d: *** %s Initialized Successfully ***\n", HostAdapter->HostNumber, HostAdapter->ControllerName); /* Indicate the Host Adapter Initialization completed successfully. */ return true; } /* BusLogic_TargetDeviceInquiry inquires about the Target Devices accessible through Host Adapter and reports on the results. */ static boolean BusLogic_TargetDeviceInquiry(BusLogic_HostAdapter_T *HostAdapter) { BusLogic_InstalledDevices_T InstalledDevices; BusLogic_InstalledDevices8_T InstalledDevicesID0to7; BusLogic_SetupInformation_T SetupInformation; BusLogic_SynchronousPeriod_T SynchronousPeriod; BusLogic_RequestedReplyLength_T RequestedReplyLength; int TargetDevicesFound = 0, TargetID; /* Wait a few seconds between the Host Adapter Hard Reset which initiates a SCSI Bus Reset and issuing any SCSI Commands. Some SCSI devices get confused if they receive SCSI Commands too soon after a SCSI Bus Reset. */ BusLogic_Delay(HostAdapter->BusSettleTime); /* Inhibit the Target Devices Inquiry if requested. */ if (HostAdapter->LocalOptions & BusLogic_InhibitTargetInquiry) { printk("scsi%d: Target Device Inquiry Inhibited\n", HostAdapter->HostNumber); return true; } /* Issue the Inquire Target Devices command for controllers with firmware version 4.25 or later, or the Inquire Installed Devices ID 0 to 7 command for older controllers. This is necessary to force Synchronous Transfer Negotiation so that the Inquire Setup Information and Inquire Synchronous Period commands will return valid data. The Inquire Target Devices command is preferable to Inquire Installed Devices ID 0 to 7 since it only probes Logical Unit 0 of each Target Device. */ if (strcmp(HostAdapter->FirmwareVersion, "4.25") >= 0) { if (BusLogic_Command(HostAdapter, BusLogic_InquireTargetDevices, NULL, 0, &InstalledDevices, sizeof(InstalledDevices)) != sizeof(InstalledDevices)) return BusLogic_Failure(HostAdapter, "INQUIRE TARGET DEVICES"); } else { if (BusLogic_Command(HostAdapter, BusLogic_InquireInstalledDevicesID0to7, NULL, 0, &InstalledDevicesID0to7, sizeof(InstalledDevicesID0to7)) != sizeof(InstalledDevicesID0to7)) return BusLogic_Failure(HostAdapter, "INQUIRE INSTALLED DEVICES ID 0 TO 7"); InstalledDevices = 0; for (TargetID = 0; TargetID < 8; TargetID++) if (InstalledDevicesID0to7[TargetID] != 0) InstalledDevices |= (1 << TargetID); } /* Issue the Inquire Setup Information command. */ RequestedReplyLength = sizeof(SetupInformation); if (BusLogic_Command(HostAdapter, BusLogic_InquireSetupInformation, &RequestedReplyLength, sizeof(RequestedReplyLength), &SetupInformation, sizeof(SetupInformation)) != sizeof(SetupInformation)) return BusLogic_Failure(HostAdapter, "INQUIRE SETUP INFORMATION"); /* Issue the Inquire Synchronous Period command. */ if (HostAdapter->FirmwareVersion[0] >= '3') { RequestedReplyLength = sizeof(SynchronousPeriod); if (BusLogic_Command(HostAdapter, BusLogic_InquireSynchronousPeriod, &RequestedReplyLength, sizeof(RequestedReplyLength), &SynchronousPeriod, sizeof(SynchronousPeriod)) != sizeof(SynchronousPeriod)) return BusLogic_Failure(HostAdapter, "INQUIRE SYNCHRONOUS PERIOD"); } else for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++) if (SetupInformation.SynchronousValuesID0to7[TargetID].Offset > 0) SynchronousPeriod[TargetID] = 20 + 5 * SetupInformation.SynchronousValuesID0to7[TargetID] .TransferPeriod; else SynchronousPeriod[TargetID] = 0; /* Save the Installed Devices, Synchronous Values, and Synchronous Period information in the Host Adapter structure. */ HostAdapter->InstalledDevices = InstalledDevices; memcpy(HostAdapter->SynchronousValues, SetupInformation.SynchronousValuesID0to7, sizeof(BusLogic_SynchronousValues8_T)); if (HostAdapter->HostWideSCSI) memcpy(&HostAdapter->SynchronousValues[8], SetupInformation.SynchronousValuesID8to15, sizeof(BusLogic_SynchronousValues8_T)); memcpy(HostAdapter->SynchronousPeriod, SynchronousPeriod, sizeof(BusLogic_SynchronousPeriod_T)); /* Report on the Target Devices found. */ for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++) if (HostAdapter->InstalledDevices & (1 << TargetID)) { int SynchronousPeriod = HostAdapter->SynchronousPeriod[TargetID]; if (SynchronousPeriod > 10) { int SynchronousTransferRate = 100000000 / SynchronousPeriod; int RoundedSynchronousTransferRate = (SynchronousTransferRate + 5000) / 10000; printk("scsi%d: Target %d: Synchronous at " "%d.%02d mega-transfers/second, offset %d\n", HostAdapter->HostNumber, TargetID, RoundedSynchronousTransferRate / 100, RoundedSynchronousTransferRate % 100, HostAdapter->SynchronousValues[TargetID].Offset); } else if (SynchronousPeriod > 0) { int SynchronousTransferRate = 100000000 / SynchronousPeriod; int RoundedSynchronousTransferRate = (SynchronousTransferRate + 50000) / 100000; printk("scsi%d: Target %d: Synchronous at " "%d.%01d mega-transfers/second, offset %d\n", HostAdapter->HostNumber, TargetID, RoundedSynchronousTransferRate / 10, RoundedSynchronousTransferRate % 10, HostAdapter->SynchronousValues[TargetID].Offset); } else printk("scsi%d: Target %d: Asynchronous\n", HostAdapter->HostNumber, TargetID); TargetDevicesFound++; } if (TargetDevicesFound == 0) printk("scsi%d: No Target Devices Found\n", HostAdapter->HostNumber); /* Indicate the Target Device Inquiry completed successfully. */ return true; } /* BusLogic_InitializeHostStructure initializes the fields in the SCSI Host structure. The base, io_port, n_io_ports, irq, and dma_channel fields in the SCSI Host structure are intentionally left uninitialized, as this driver handles acquisition and release of these resources explicitly, as well as ensuring exclusive access to the Host Adapter hardware and data structures through explicit acquisition and release of the Host Adapter's Lock. */ static void BusLogic_InitializeHostStructure(BusLogic_HostAdapter_T *HostAdapter, SCSI_Host_T *Host) { Host->max_id = HostAdapter->MaxTargetDevices; Host->max_lun = HostAdapter->MaxLogicalUnits; Host->max_channel = 0; Host->unique_id = HostAdapter->IO_Address; Host->this_id = HostAdapter->SCSI_ID; Host->can_queue = HostAdapter->MailboxCount; Host->sg_tablesize = HostAdapter->DriverScatterGatherLimit; Host->unchecked_isa_dma = HostAdapter->BounceBuffersRequired; Host->cmd_per_lun = HostAdapter->UntaggedQueueDepth; } /* BusLogic_SelectQueueDepths selects Queue Depths for each Target Device based on the Host Adapter's Total Queue Depth and the number, type, speed, and capabilities of the Target Devices. */ static void BusLogic_SelectQueueDepths(SCSI_Host_T *Host, SCSI_Device_T *DeviceList) { BusLogic_HostAdapter_T *HostAdapter = (BusLogic_HostAdapter_T *) Host->hostdata; int TaggedQueueDepth = HostAdapter->TaggedQueueDepth; int UntaggedQueueDepth = HostAdapter->UntaggedQueueDepth; int TaggedDeviceCount = 0, UntaggedDeviceCount = 0; SCSI_Device_T *Device; for (Device = DeviceList; Device != NULL; Device = Device->next) if (Device->host == Host) { if (Device->tagged_supported && (HostAdapter->TaggedQueuingPermitted & (1 << Device->id))) TaggedDeviceCount++; else UntaggedDeviceCount++; } if (TaggedQueueDepth == 0 && TaggedDeviceCount > 0) { TaggedQueueDepth = 1 + ((HostAdapter->TotalQueueDepth - UntaggedDeviceCount * UntaggedQueueDepth) / TaggedDeviceCount); if (TaggedQueueDepth > BusLogic_PreferredTaggedQueueDepth) TaggedQueueDepth = BusLogic_PreferredTaggedQueueDepth; } for (Device = DeviceList; Device != NULL; Device = Device->next) if (Device->host == Host) { if (Device->tagged_supported && (HostAdapter->TaggedQueuingPermitted & (1 << Device->id))) Device->queue_depth = TaggedQueueDepth; else Device->queue_depth = UntaggedQueueDepth; if (BusLogic_GlobalOptions & BusLogic_TraceQueueDepths) printk("scsi%d: Setting Queue Depth for Target %d to %d\n", HostAdapter->HostNumber, Device->id, Device->queue_depth); } } /* BusLogic_DetectHostAdapter probes for BusLogic Host Adapters at the standard I/O Addresses where they may be located, initializing, registering, and reporting the configuration of each BusLogic Host Adapter it finds. It returns the number of BusLogic Host Adapters successfully initialized and registered. */ int BusLogic_DetectHostAdapter(SCSI_Host_Template_T *HostTemplate) { int BusLogicHostAdapterCount = 0, CommandLineEntryIndex = 0; int AddressProbeIndex = 0; if (BusLogic_ProbeOptions & BusLogic_NoProbe) return 0; BusLogic_InitializeAddressProbeList(); while (BusLogic_IO_AddressProbeList[AddressProbeIndex] > 0) { BusLogic_HostAdapter_T HostAdapterPrototype; BusLogic_HostAdapter_T *HostAdapter = &HostAdapterPrototype; SCSI_Host_T *Host; memset(HostAdapter, 0, sizeof(BusLogic_HostAdapter_T)); HostAdapter->IO_Address = BusLogic_IO_AddressProbeList[AddressProbeIndex++]; /* Initialize the Command Line Entry field if an explicit I/O Address was specified. */ if (CommandLineEntryIndex < BusLogic_CommandLineEntryCount && BusLogic_CommandLineEntries[CommandLineEntryIndex].IO_Address == HostAdapter->IO_Address) HostAdapter->CommandLineEntry = &BusLogic_CommandLineEntries[CommandLineEntryIndex++]; /* Check whether the I/O Address range is already in use. */ if (check_region(HostAdapter->IO_Address, BusLogic_IO_PortCount) < 0) continue; /* Probe the Host Adapter. If unsuccessful, abort further initialization. */ if (!BusLogic_ProbeHostAdapter(HostAdapter)) continue; /* Hard Reset the Host Adapter. If unsuccessful, abort further initialization. */ if (!BusLogic_HardResetHostAdapter(HostAdapter)) continue; /* Check the Host Adapter. If unsuccessful, abort further initialization. */ if (!BusLogic_CheckHostAdapter(HostAdapter)) continue; /* Initialize the Command Line Entry field if an explicit I/O Address was not specified. */ if (CommandLineEntryIndex < BusLogic_CommandLineEntryCount && BusLogic_CommandLineEntries[CommandLineEntryIndex].IO_Address == 0) HostAdapter->CommandLineEntry = &BusLogic_CommandLineEntries[CommandLineEntryIndex++]; /* Announce the Driver Version and Date, Author's Name, Copyright Notice, and Contact Address. */ BusLogic_AnnounceDriver(); /* Register usage of the I/O Address range. From this point onward, any failure will be assumed to be due to a problem with the Host Adapter, rather than due to having mistakenly identified this port as belonging to a BusLogic Host Adapter. The I/O Address range will not be released, thereby preventing it from being incorrectly identified as any other type of Host Adapter. */ request_region(HostAdapter->IO_Address, BusLogic_IO_PortCount, "BusLogic"); /* Register the SCSI Host structure. */ HostTemplate->proc_dir = &BusLogic_ProcDirectoryEntry; Host = scsi_register(HostTemplate, sizeof(BusLogic_HostAdapter_T)); HostAdapter = (BusLogic_HostAdapter_T *) Host->hostdata; memcpy(HostAdapter, &HostAdapterPrototype, sizeof(BusLogic_HostAdapter_T)); HostAdapter->SCSI_Host = Host; HostAdapter->HostNumber = Host->host_no; Host->select_queue_depths = BusLogic_SelectQueueDepths; /* Add Host Adapter to the end of the list of registered BusLogic Host Adapters. In order for Command Complete Interrupts to be properly dismissed by BusLogic_InterruptHandler, the Host Adapter must be registered. This must be done before the IRQ Channel is acquired, and in a shared IRQ Channel environment, must be done before any Command Complete Interrupts occur, since the IRQ Channel may have already been acquired by a previous BusLogic Host Adapter. */ BusLogic_RegisterHostAdapter(HostAdapter); /* Read the Host Adapter Configuration, Acquire the System Resources necessary to use Host Adapter and initialize the fields in the SCSI Host structure, then Test Interrupts, Create the Mailboxes and CCBs, Initialize the Host Adapter, and finally perform Target Device Inquiry. */ if (BusLogic_ReadHostAdapterConfiguration(HostAdapter) && BusLogic_AcquireResources(HostAdapter) && BusLogic_TestInterrupts(HostAdapter) && BusLogic_CreateMailboxes(HostAdapter) && BusLogic_CreateCCBs(HostAdapter) && BusLogic_InitializeHostAdapter(HostAdapter) && BusLogic_TargetDeviceInquiry(HostAdapter)) { /* Initialization has been completed successfully. Release and re-register usage of the I/O Address range so that the Model Name of the Host Adapter will appear, and initialize the SCSI Host structure. */ release_region(HostAdapter->IO_Address, BusLogic_IO_PortCount); request_region(HostAdapter->IO_Address, BusLogic_IO_PortCount, HostAdapter->ControllerName); BusLogic_InitializeHostStructure(HostAdapter, Host); BusLogicHostAdapterCount++; } else { /* An error occurred during Host Adapter Configuration Querying, Resource Acquisition, Interrupt Testing, CCB Creation, Host Adapter Initialization, or Target Device Inquiry, so remove Host Adapter from the list of registered BusLogic Host Adapters, destroy the CCBs and Mailboxes, Release the System Resources, and Unregister the SCSI Host. */ BusLogic_DestroyCCBs(HostAdapter); BusLogic_DestroyMailboxes(HostAdapter); BusLogic_ReleaseResources(HostAdapter); BusLogic_UnregisterHostAdapter(HostAdapter); scsi_unregister(Host); } } return BusLogicHostAdapterCount; } /* BusLogic_ReleaseHostAdapter releases all resources previously acquired to support a specific Host Adapter, including the I/O Address range, and unregisters the BusLogic Host Adapter. */ int BusLogic_ReleaseHostAdapter(SCSI_Host_T *Host) { BusLogic_HostAdapter_T *HostAdapter = (BusLogic_HostAdapter_T *) Host->hostdata; /* Destroy the CCBs and Mailboxes, and release any system resources acquired to support Host Adapter. */ BusLogic_DestroyCCBs(HostAdapter); BusLogic_DestroyMailboxes(HostAdapter); BusLogic_ReleaseResources(HostAdapter); /* Release usage of the I/O Address range. */ release_region(HostAdapter->IO_Address, BusLogic_IO_PortCount); /* Remove Host Adapter from the list of registered BusLogic Host Adapters. */ BusLogic_UnregisterHostAdapter(HostAdapter); return 0; } /* BusLogic_ComputeResultCode computes a SCSI Subsystem Result Code from the Host Adapter Status and Target Device Status. */ static int BusLogic_ComputeResultCode(BusLogic_HostAdapterStatus_T HostAdapterStatus, BusLogic_TargetDeviceStatus_T TargetDeviceStatus) { int HostStatus; switch (HostAdapterStatus) { case BusLogic_CommandCompletedNormally: case BusLogic_LinkedCommandCompleted: case BusLogic_LinkedCommandCompletedWithFlag: HostStatus = DID_OK; break; case BusLogic_SCSISelectionTimeout: HostStatus = DID_TIME_OUT; break; case BusLogic_InvalidOutgoingMailboxActionCode: case BusLogic_InvalidCommandOperationCode: case BusLogic_InvalidCommandParameter: printk("BusLogic: BusLogic Driver Protocol Error 0x%02X\n", HostAdapterStatus); case BusLogic_DataOverUnderRun: case BusLogic_UnexpectedBusFree: case BusLogic_LinkedCCBhasInvalidLUN: case BusLogic_AutoRequestSenseFailed: case BusLogic_TaggedQueuingMessageRejected: case BusLogic_UnsupportedMessageReceived: case BusLogic_HostAdapterHardwareFailed: case BusLogic_TargetDeviceReconnectedImproperly: case BusLogic_AbortQueueGenerated: case BusLogic_HostAdapterSoftwareError: case BusLogic_HostAdapterHardwareTimeoutError: case BusLogic_SCSIParityErrorDetected: HostStatus = DID_ERROR; break; case BusLogic_InvalidBusPhaseRequested: case BusLogic_TargetFailedResponseToATN: case BusLogic_HostAdapterAssertedRST: case BusLogic_OtherDeviceAssertedRST: case BusLogic_HostAdapterAssertedBusDeviceReset: HostStatus = DID_RESET; break; default: printk("BusLogic: Unknown Host Adapter Status 0x%02X\n", HostAdapterStatus); HostStatus = DID_ERROR; break; } return (HostStatus << 16) | TargetDeviceStatus; } /* BusLogic_InterruptHandler handles hardware interrupts from BusLogic Host Adapters. To simplify handling shared IRQ Channels, all installed BusLogic Host Adapters are scanned whenever any one of them signals a hardware interrupt. */ static void BusLogic_InterruptHandler(int IRQ_Channel, void *DeviceIdentifier, Registers_T *InterruptRegisters) { BusLogic_CCB_T *FirstCompletedCCB = NULL, *LastCompletedCCB = NULL; BusLogic_HostAdapter_T *HostAdapter; int HostAdapterResetRequestedCount = 0; BusLogic_Lock_T Lock; /* Iterate over the installed BusLogic Host Adapters accepting any Incoming Mailbox entries and saving the completed CCBs for processing. This interrupt handler is installed as a fast interrupt, so interrupts are disabled when the interrupt handler is entered. */ for (HostAdapter = BusLogic_RegisteredHostAdapters; HostAdapter != NULL; HostAdapter = HostAdapter->Next) { unsigned char InterruptRegister; /* Acquire exclusive access to Host Adapter. */ BusLogic_AcquireHostAdapterLockID(HostAdapter, &Lock); /* Read the Host Adapter Interrupt Register. */ InterruptRegister = BusLogic_ReadInterruptRegister(HostAdapter); if (InterruptRegister & BusLogic_InterruptValid) { /* Acknowledge the interrupt and reset the Host Adapter Interrupt Register. */ BusLogic_WriteControlRegister(HostAdapter, BusLogic_InterruptReset); /* Process valid SCSI Reset State and Incoming Mailbox Loaded Interrupts. Command Complete Interrupts are noted, and Outgoing Mailbox Available Interrupts are ignored, as they are never enabled. */ if (InterruptRegister & BusLogic_SCSIResetState) { HostAdapter->HostAdapterResetRequested = true; HostAdapterResetRequestedCount++; } else if (InterruptRegister & BusLogic_IncomingMailboxLoaded) { /* Scan through the Incoming Mailboxes in Strict Round Robin fashion, saving any completed CCBs for further processing. It is essential that for each CCB and SCSI Command issued, command completion processing is performed exactly once. Therefore, only Incoming Mailboxes with completion code Command Completed Without Error, Command Completed With Error, or Command Aborted At Host Request are saved for completion processing. When an Incoming Mailbox has a completion code of Aborted Command Not Found, the CCB had already completed or been aborted before the current Abort request was processed, and so completion processing has already occurred and no further action should be taken. */ BusLogic_IncomingMailbox_T *NextIncomingMailbox = HostAdapter->NextIncomingMailbox; BusLogic_CompletionCode_T MailboxCompletionCode; while ((MailboxCompletionCode = NextIncomingMailbox->CompletionCode) != BusLogic_IncomingMailboxFree) { BusLogic_CCB_T *CCB = (BusLogic_CCB_T *) Bus_to_Virtual(NextIncomingMailbox->CCB); if (MailboxCompletionCode != BusLogic_AbortedCommandNotFound) if (CCB->Status == BusLogic_CCB_Active || CCB->Status == BusLogic_CCB_Reset) { /* Mark this CCB as completed and add it to the end of the list of completed CCBs. */ CCB->Status = BusLogic_CCB_Completed; CCB->MailboxCompletionCode = MailboxCompletionCode; CCB->Next = NULL; if (FirstCompletedCCB == NULL) { FirstCompletedCCB = CCB; LastCompletedCCB = CCB; } else { LastCompletedCCB->Next = CCB; LastCompletedCCB = CCB; } HostAdapter->ActiveCommandCount[CCB->TargetID]--; } else { /* If a CCB ever appears in an Incoming Mailbox and is not marked as status Active or Reset, then there is most likely a bug in the Host Adapter firmware. */ printk("scsi%d: Illegal CCB #%ld status %d in " "Incoming Mailbox\n", HostAdapter->HostNumber, CCB->SerialNumber, CCB->Status); } else printk("scsi%d: Aborted CCB #%ld to Target %d " "Not Found\n", HostAdapter->HostNumber, CCB->SerialNumber, CCB->TargetID); NextIncomingMailbox->CompletionCode = BusLogic_IncomingMailboxFree; if (++NextIncomingMailbox > HostAdapter->LastIncomingMailbox) NextIncomingMailbox = HostAdapter->FirstIncomingMailbox; } HostAdapter->NextIncomingMailbox = NextIncomingMailbox; } else if (InterruptRegister & BusLogic_CommandComplete) HostAdapter->HostAdapterCommandCompleted = true; } /* Release exclusive access to Host Adapter. */ BusLogic_ReleaseHostAdapterLockID(HostAdapter, &Lock); } /* Iterate over the completed CCBs setting the SCSI Command Result Codes, deallocating the CCBs, and calling the Completion Routines. */ while (FirstCompletedCCB != NULL) { BusLogic_CCB_T *CCB = FirstCompletedCCB; SCSI_Command_T *Command = CCB->Command; FirstCompletedCCB = FirstCompletedCCB->Next; HostAdapter = CCB->HostAdapter; /* Acquire exclusive access to Host Adapter. */ BusLogic_AcquireHostAdapterLockID(HostAdapter, &Lock); /* Process the Completed CCB. */ if (CCB->Opcode == BusLogic_BusDeviceReset) { int TargetID = CCB->TargetID; printk("scsi%d: Bus Device Reset CCB #%ld to Target %d Completed\n", HostAdapter->HostNumber, CCB->SerialNumber, TargetID); HostAdapter->TotalCommandCount[TargetID] = 0; HostAdapter->TaggedQueuingActive[TargetID] = false; /* Place CCB back on the Host Adapter's free list. */ BusLogic_DeallocateCCB(CCB); /* Bus Device Reset CCBs have the Command field non-NULL only when a Bus Device Reset was requested for a Command that did not have a currently active CCB in the Host Adapter (i.e., a Synchronous Bus Device Reset), and hence would not have its Completion Routine called otherwise. */ while (Command != NULL) { SCSI_Command_T *NextCommand = Command->reset_chain; Command->reset_chain = NULL; Command->result = DID_RESET << 16; Command->scsi_done(Command); Command = NextCommand; } /* Iterate over the CCBs for this Host Adapter performing completion processing for any CCBs marked as Reset for this Target. */ for (CCB = HostAdapter->All_CCBs; CCB != NULL; CCB = CCB->NextAll) if (CCB->Status == BusLogic_CCB_Reset && CCB->TargetID == TargetID) { Command = CCB->Command; BusLogic_DeallocateCCB(CCB); HostAdapter->ActiveCommandCount[TargetID]--; Command->result = DID_RESET << 16; Command->scsi_done(Command); } HostAdapter->BusDeviceResetPendingCCB[TargetID] = NULL; } else { /* Translate the Mailbox Completion Code, Host Adapter Status, and Target Device Status into a SCSI Subsystem Result Code. */ switch (CCB->MailboxCompletionCode) { case BusLogic_IncomingMailboxFree: case BusLogic_AbortedCommandNotFound: printk("scsi%d: CCB #%ld to Target %d Impossible State\n", HostAdapter->HostNumber, CCB->SerialNumber, CCB->TargetID); break; case BusLogic_CommandCompletedWithoutError: HostAdapter->CommandSuccessfulFlag[CCB->TargetID] = true; Command->result = DID_OK << 16; break; case BusLogic_CommandAbortedAtHostRequest: printk("scsi%d: CCB #%ld to Target %d Aborted\n", HostAdapter->HostNumber, CCB->SerialNumber, CCB->TargetID); Command->result = DID_ABORT << 16; break; case BusLogic_CommandCompletedWithError: Command->result = BusLogic_ComputeResultCode(CCB->HostAdapterStatus, CCB->TargetDeviceStatus); if (BusLogic_GlobalOptions & BusLogic_TraceErrors) if (CCB->HostAdapterStatus != BusLogic_SCSISelectionTimeout) { int i; printk("scsi%d: CCB #%ld Target %d: Result %X " "Host Adapter Status %02X Target Status %02X\n", HostAdapter->HostNumber, CCB->SerialNumber, CCB->TargetID, Command->result, CCB->HostAdapterStatus, CCB->TargetDeviceStatus); printk("scsi%d: CDB ", HostAdapter->HostNumber); for (i = 0; i < CCB->CDB_Length; i++) printk(" %02X", CCB->CDB[i]); printk("\n"); printk("scsi%d: Sense ", HostAdapter->HostNumber); for (i = 0; i < CCB->SenseDataLength; i++) printk(" %02X", Command->sense_buffer[i]); printk("\n"); } break; } /* Place CCB back on the Host Adapter's free list. */ BusLogic_DeallocateCCB(CCB); /* Call the SCSI Command Completion Routine. */ Command->scsi_done(Command); } /* Release exclusive access to Host Adapter. */ BusLogic_ReleaseHostAdapterLockID(HostAdapter, &Lock); } /* Iterate over the Host Adapters performing any requested Host Adapter Resets. */ if (HostAdapterResetRequestedCount == 0) return; for (HostAdapter = BusLogic_RegisteredHostAdapters; HostAdapter != NULL; HostAdapter = HostAdapter->Next) if (HostAdapter->HostAdapterResetRequested) { BusLogic_ResetHostAdapter(HostAdapter, NULL, 0); HostAdapter->HostAdapterResetRequested = false; scsi_mark_host_reset(HostAdapter->SCSI_Host); } } /* BusLogic_WriteOutgoingMailbox places CCB and Action Code into an Outgoing Mailbox for execution by Host Adapter. The Host Adapter's Lock should have already been acquired by the caller. */ static boolean BusLogic_WriteOutgoingMailbox(BusLogic_HostAdapter_T *HostAdapter, BusLogic_ActionCode_T ActionCode, BusLogic_CCB_T *CCB) { BusLogic_OutgoingMailbox_T *NextOutgoingMailbox; NextOutgoingMailbox = HostAdapter->NextOutgoingMailbox; if (NextOutgoingMailbox->ActionCode == BusLogic_OutgoingMailboxFree) { CCB->Status = BusLogic_CCB_Active; /* The CCB field must be written before the Action Code field since the Host Adapter is operating asynchronously and the locking code does not protect against simultaneous access by the Host Adapter. */ NextOutgoingMailbox->CCB = Virtual_to_Bus(CCB); NextOutgoingMailbox->ActionCode = ActionCode; BusLogic_StartMailboxCommand(HostAdapter); if (++NextOutgoingMailbox > HostAdapter->LastOutgoingMailbox) NextOutgoingMailbox = HostAdapter->FirstOutgoingMailbox; HostAdapter->NextOutgoingMailbox = NextOutgoingMailbox; if (ActionCode == BusLogic_MailboxStartCommand) HostAdapter->ActiveCommandCount[CCB->TargetID]++; return true; } return false; } /* BusLogic_QueueCommand creates a CCB for Command and places it into an Outgoing Mailbox for execution by the associated Host Adapter. */ int BusLogic_QueueCommand(SCSI_Command_T *Command, void (*CompletionRoutine)(SCSI_Command_T *)) { BusLogic_HostAdapter_T *HostAdapter = (BusLogic_HostAdapter_T *) Command->host->hostdata; unsigned char *CDB = Command->cmnd; int CDB_Length = Command->cmd_len; int TargetID = Command->target; int LogicalUnit = Command->lun; void *BufferPointer = Command->request_buffer; int BufferLength = Command->request_bufflen; int SegmentCount = Command->use_sg; BusLogic_Lock_T Lock; BusLogic_CCB_T *CCB; /* SCSI REQUEST_SENSE commands will be executed automatically by the Host Adapter for any errors, so they should not be executed explicitly unless the Sense Data is zero indicating that no error occurred. */ if (CDB[0] == REQUEST_SENSE && Command->sense_buffer[0] != 0) { Command->result = DID_OK << 16; CompletionRoutine(Command); return 0; } /* Acquire exclusive access to Host Adapter. */ BusLogic_AcquireHostAdapterLock(HostAdapter, &Lock); /* Allocate a CCB from the Host Adapter's free list. In the unlikely event that there are none available and memory allocation fails, wait 1 second and try again. If that fails, the Host Adapter is probably hung so we signal an error as a Host Adapter Hard Reset should be initiated soon. */ CCB = BusLogic_AllocateCCB(HostAdapter); if (CCB == NULL) { BusLogic_Delay(1); CCB = BusLogic_AllocateCCB(HostAdapter); if (CCB == NULL) { Command->result = DID_ERROR << 16; CompletionRoutine(Command); goto Done; } } /* Initialize the fields in the BusLogic Command Control Block (CCB). */ if (SegmentCount == 0) { CCB->Opcode = BusLogic_InitiatorCCB; CCB->DataLength = BufferLength; CCB->DataPointer = Virtual_to_Bus(BufferPointer); } else { SCSI_ScatterList_T *ScatterList = (SCSI_ScatterList_T *) BufferPointer; int Segment; CCB->Opcode = BusLogic_InitiatorCCB_ScatterGather; CCB->DataLength = SegmentCount * sizeof(BusLogic_ScatterGatherSegment_T); CCB->DataPointer = Virtual_to_Bus(CCB->ScatterGatherList); for (Segment = 0; Segment < SegmentCount; Segment++) { CCB->ScatterGatherList[Segment].SegmentByteCount = ScatterList[Segment].length; CCB->ScatterGatherList[Segment].SegmentDataPointer = Virtual_to_Bus(ScatterList[Segment].address); } } switch (CDB[0]) { case READ_6: case READ_10: CCB->DataDirection = BusLogic_DataInLengthChecked; break; case WRITE_6: case WRITE_10: CCB->DataDirection = BusLogic_DataOutLengthChecked; break; default: CCB->DataDirection = BusLogic_UncheckedDataTransfer; break; } CCB->CDB_Length = CDB_Length; CCB->SenseDataLength = sizeof(Command->sense_buffer); CCB->HostAdapterStatus = 0; CCB->TargetDeviceStatus = 0; CCB->TargetID = TargetID; CCB->LogicalUnit = LogicalUnit; /* For Host Adapters that support it, 64 LUN Format CCBs are used to allow 64 Logical Units per Target, and this requires setting the overloaded TagEnable field to Logical Unit bit 5. */ if (HostAdapter->Host64LUNSupport) { CCB->TagEnable = LogicalUnit >> 5; CCB->TagEnable64LUN = false; } else CCB->TagEnable = false; /* BusLogic recommends that after a Reset the first couple of commands that are sent to a Target Device be sent in a non Tagged Queue fashion so that the Host Adapter and Target Device can establish Synchronous and Wide Transfer before Queue Tag messages can interfere with the Synchronous and Wide Negotiation messages. By waiting to enable Tagged Queuing until after the first BusLogic_MaxTaggedQueueDepth commands have been queued, it is assured that after a Reset any pending commands are requeued before Tagged Queuing is enabled and that the Tagged Queuing message will not occur while the partition table is being printed. In addition, some devices do not properly handle the transition from non-tagged to tagged commands, so it is necessary to wait until there are no pending commands for a target device before queuing tagged commands. */ if (HostAdapter->TotalCommandCount[TargetID]++ >= BusLogic_MaxTaggedQueueDepth && !HostAdapter->TaggedQueuingActive[TargetID] && HostAdapter->ActiveCommandCount[TargetID] == 0 && (HostAdapter->TaggedQueuingPermitted & (1 << TargetID)) && Command->device->tagged_supported) { HostAdapter->TaggedQueuingActive[TargetID] = true; printk("scsi%d: Tagged Queuing now active for Target %d\n", HostAdapter->HostNumber, TargetID); } if (HostAdapter->TaggedQueuingActive[TargetID]) { BusLogic_QueueTag_T QueueTag = BusLogic_SimpleQueueTag; /* When using Tagged Queuing with Simple Queue Tags, it appears that disk drive controllers do not guarantee that a queued command will not remain in a disconnected state indefinitely if commands that read or write nearer the head position continue to arrive without interruption. Therefore, for each Target Device this driver keeps track of the last time either the queue was empty or an Ordered Queue Tag was issued. If more than 5 seconds (one third of the 15 second disk timeout) have elapsed since this last sequence point, this command will be issued with an Ordered Queue Tag rather than a Simple Queue Tag, which forces the Target Device to complete all previously queued commands before this command may be executed. */ if (HostAdapter->ActiveCommandCount[TargetID] == 0) HostAdapter->LastSequencePoint[TargetID] = jiffies; else if (jiffies - HostAdapter->LastSequencePoint[TargetID] > 5*HZ) { HostAdapter->LastSequencePoint[TargetID] = jiffies; QueueTag = BusLogic_OrderedQueueTag; } if (HostAdapter->Host64LUNSupport) { CCB->TagEnable64LUN = true; CCB->QueueTag64LUN = QueueTag; } else { CCB->TagEnable = true; CCB->QueueTag = QueueTag; } } memcpy(CCB->CDB, CDB, CDB_Length); CCB->SenseDataPointer = Virtual_to_Bus(&Command->sense_buffer); CCB->Command = Command; Command->scsi_done = CompletionRoutine; /* Place the CCB in an Outgoing Mailbox. The higher levels of the SCSI Subsystem should not attempt to queue more commands than can be placed in Outgoing Mailboxes, so there should always be one free. In the unlikely event that there are none available, wait 1 second and try again. If that fails, the Host Adapter is probably hung so we signal an error as a Host Adapter Hard Reset should be initiated soon. */ if (!BusLogic_WriteOutgoingMailbox(HostAdapter, BusLogic_MailboxStartCommand, CCB)) { printk("scsi%d: cannot write Outgoing Mailbox - Pausing for 1 second\n", HostAdapter->HostNumber); BusLogic_Delay(1); if (!BusLogic_WriteOutgoingMailbox(HostAdapter, BusLogic_MailboxStartCommand, CCB)) { printk("scsi%d: still cannot write Outgoing Mailbox - " "Host Adapter Dead?\n", HostAdapter->HostNumber); BusLogic_DeallocateCCB(CCB); Command->result = DID_ERROR << 16; Command->scsi_done(Command); } } /* Release exclusive access to Host Adapter. */ Done: BusLogic_ReleaseHostAdapterLock(HostAdapter, &Lock); return 0; } /* BusLogic_AbortCommand aborts Command if possible. */ int BusLogic_AbortCommand(SCSI_Command_T *Command) { BusLogic_HostAdapter_T *HostAdapter = (BusLogic_HostAdapter_T *) Command->host->hostdata; int TargetID = Command->target; BusLogic_Lock_T Lock; BusLogic_CCB_T *CCB; int Result; /* Acquire exclusive access to Host Adapter. */ BusLogic_AcquireHostAdapterLock(HostAdapter, &Lock); /* If this Command has already completed, then no Abort is necessary. */ if (Command->serial_number != Command->serial_number_at_timeout) { printk("scsi%d: Unable to Abort Command to Target %d - " "Already Completed\n", HostAdapter->HostNumber, TargetID); Result = SCSI_ABORT_NOT_RUNNING; goto Done; } /* Attempt to find an Active CCB for this Command. If no Active CCB for this Command is found, then no Abort is necessary. */ for (CCB = HostAdapter->All_CCBs; CCB != NULL; CCB = CCB->NextAll) if (CCB->Command == Command) break; if (CCB == NULL) { printk("scsi%d: Unable to Abort Command to Target %d - No CCB Found\n", HostAdapter->HostNumber, TargetID); Result = SCSI_ABORT_NOT_RUNNING; goto Done; } else if (CCB->Status == BusLogic_CCB_Completed) { printk("scsi%d: Unable to Abort Command to Target %d - CCB Completed\n", HostAdapter->HostNumber, TargetID); Result = SCSI_ABORT_NOT_RUNNING; goto Done; } else if (CCB->Status == BusLogic_CCB_Reset) { printk("scsi%d: Unable to Abort Command to Target %d - CCB Reset\n", HostAdapter->HostNumber, TargetID); Result = SCSI_ABORT_NOT_RUNNING; goto Done; } /* Attempt to Abort this CCB. Firmware versions prior to 5.xx do not generate Abort Tag messages, but only generate the non-tagged Abort message. Since non-tagged commands are not sent by the Host Adapter until the queue of outstanding tagged commands has completed, and the Abort message is treated as a non-tagged command, it is effectively impossible to abort commands when Tagged Queuing is active. Firmware version 5.xx does generate Abort Tag messages, so it is possible to abort commands when Tagged Queuing is active. */ if (HostAdapter->TaggedQueuingActive[TargetID] && HostAdapter->FirmwareVersion[0] < '5') { printk("scsi%d: Unable to Abort CCB #%ld to Target %d - " "Abort Tag Not Supported\n", HostAdapter->HostNumber, CCB->SerialNumber, TargetID); Result = SCSI_ABORT_SNOOZE; } else if (BusLogic_WriteOutgoingMailbox(HostAdapter, BusLogic_MailboxAbortCommand, CCB)) { printk("scsi%d: Aborting CCB #%ld to Target %d\n", HostAdapter->HostNumber, CCB->SerialNumber, TargetID); Result = SCSI_ABORT_PENDING; } else { printk("scsi%d: Unable to Abort CCB #%ld to Target %d - " "No Outgoing Mailboxes\n", HostAdapter->HostNumber, CCB->SerialNumber, TargetID); Result = SCSI_ABORT_BUSY; } /* Release exclusive access to Host Adapter. */ Done: BusLogic_ReleaseHostAdapterLock(HostAdapter, &Lock); return Result; } /* BusLogic_ResetHostAdapter resets Host Adapter if possible, marking all currently executing SCSI Commands as having been Reset. */ static int BusLogic_ResetHostAdapter(BusLogic_HostAdapter_T *HostAdapter, SCSI_Command_T *Command, unsigned int ResetFlags) { BusLogic_Lock_T Lock; BusLogic_CCB_T *CCB; int TargetID, Result; /* Acquire exclusive access to Host Adapter. */ BusLogic_AcquireHostAdapterLock(HostAdapter, &Lock); /* If this is an Asynchronous Reset and this Command has already completed, then no Reset is necessary. */ if (ResetFlags & SCSI_RESET_ASYNCHRONOUS) { TargetID = Command->target; if (Command->serial_number != Command->serial_number_at_timeout) { printk("scsi%d: Unable to Reset Command to Target %d - " "Already Completed or Reset\n", HostAdapter->HostNumber, TargetID); Result = SCSI_RESET_NOT_RUNNING; goto Done; } for (CCB = HostAdapter->All_CCBs; CCB != NULL; CCB = CCB->NextAll) if (CCB->Command == Command) break; if (CCB == NULL) { printk("scsi%d: Unable to Reset Command to Target %d - " "No CCB Found\n", HostAdapter->HostNumber, TargetID); Result = SCSI_RESET_NOT_RUNNING; goto Done; } else if (CCB->Status == BusLogic_CCB_Completed) { printk("scsi%d: Unable to Reset Command to Target %d - " "CCB Completed\n", HostAdapter->HostNumber, TargetID); Result = SCSI_RESET_NOT_RUNNING; goto Done; } else if (CCB->Status == BusLogic_CCB_Reset && HostAdapter->BusDeviceResetPendingCCB[TargetID] == NULL) { printk("scsi%d: Unable to Reset Command to Target %d - " "Reset Pending\n", HostAdapter->HostNumber, TargetID); Result = SCSI_RESET_PENDING; goto Done; } } if (Command == NULL) printk("scsi%d: Resetting %s due to SCSI Reset State Interrupt\n", HostAdapter->HostNumber, HostAdapter->ControllerName); else printk("scsi%d: Resetting %s due to Target %d\n", HostAdapter->HostNumber, HostAdapter->ControllerName, Command->target); /* Attempt to Reset and Reinitialize the Host Adapter. */ if (!(BusLogic_HardResetHostAdapter(HostAdapter) && BusLogic_InitializeHostAdapter(HostAdapter))) { printk("scsi%d: Resetting %s Failed\n", HostAdapter->HostNumber, HostAdapter->ControllerName); Result = SCSI_RESET_ERROR; goto Done; } /* Mark all currently executing CCBs as having been Reset. */ for (CCB = HostAdapter->All_CCBs; CCB != NULL; CCB = CCB->NextAll) if (CCB->Status == BusLogic_CCB_Active) CCB->Status = BusLogic_CCB_Reset; /* Wait a few seconds between the Host Adapter Hard Reset which initiates a SCSI Bus Reset and issuing any SCSI Commands. Some SCSI devices get confused if they receive SCSI Commands too soon after a SCSI Bus Reset. Note that a timer interrupt may occur here, but all active CCBs have already been marked Reset and so a reentrant call will return Pending. */ BusLogic_Delay(HostAdapter->BusSettleTime); /* If this is a Synchronous Reset, perform completion processing for the Command being Reset. */ if (ResetFlags & SCSI_RESET_SYNCHRONOUS) { Command->result = DID_RESET << 16; Command->scsi_done(Command); } /* Perform completion processing for all CCBs marked as Reset. */ for (CCB = HostAdapter->All_CCBs; CCB != NULL; CCB = CCB->NextAll) if (CCB->Status == BusLogic_CCB_Reset) { Command = CCB->Command; BusLogic_DeallocateCCB(CCB); while (Command != NULL) { SCSI_Command_T *NextCommand = Command->reset_chain; Command->reset_chain = NULL; Command->result = DID_RESET << 16; Command->scsi_done(Command); Command = NextCommand; } } for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++) HostAdapter->LastResetTime[TargetID] = jiffies; Result = SCSI_RESET_SUCCESS | SCSI_RESET_HOST_RESET; /* Release exclusive access to Host Adapter. */ Done: BusLogic_ReleaseHostAdapterLock(HostAdapter, &Lock); return Result; } /* BusLogic_SendBusDeviceReset sends a Bus Device Reset to the Target Device associated with Command. */ static int BusLogic_SendBusDeviceReset(BusLogic_HostAdapter_T *HostAdapter, SCSI_Command_T *Command, unsigned int ResetFlags) { int TargetID = Command->target; BusLogic_Lock_T Lock; BusLogic_CCB_T *CCB; int Result = -1; /* Acquire exclusive access to Host Adapter. */ BusLogic_AcquireHostAdapterLock(HostAdapter, &Lock); /* If this is an Asynchronous Reset and this Command has already completed, then no Reset is necessary. */ if (ResetFlags & SCSI_RESET_ASYNCHRONOUS) { if (Command->serial_number != Command->serial_number_at_timeout) { printk("scsi%d: Unable to Reset Command to Target %d - " "Already Completed\n", HostAdapter->HostNumber, TargetID); Result = SCSI_RESET_NOT_RUNNING; goto Done; } for (CCB = HostAdapter->All_CCBs; CCB != NULL; CCB = CCB->NextAll) if (CCB->Command == Command) break; if (CCB == NULL) { printk("scsi%d: Unable to Reset Command to Target %d - " "No CCB Found\n", HostAdapter->HostNumber, TargetID); Result = SCSI_RESET_NOT_RUNNING; goto Done; } else if (CCB->Status == BusLogic_CCB_Completed) { printk("scsi%d: Unable to Reset Command to Target %d - " "CCB Completed\n", HostAdapter->HostNumber, TargetID); Result = SCSI_RESET_NOT_RUNNING; goto Done; } else if (CCB->Status == BusLogic_CCB_Reset) { printk("scsi%d: Unable to Reset Command to Target %d - " "Reset Pending\n", HostAdapter->HostNumber, TargetID); Result = SCSI_RESET_PENDING; goto Done; } else if (HostAdapter->BusDeviceResetPendingCCB[TargetID] != NULL) { printk("scsi%d: Bus Device Reset already pending to Target %d\n", HostAdapter->HostNumber, TargetID); goto Done; } } /* If this is a Synchronous Reset and a Bus Device Reset is already pending for this Target Device, do not send a second one. Add this Command to the list of Commands for which completion processing must be performed when the Bus Device Reset CCB completes. */ if (ResetFlags & SCSI_RESET_SYNCHRONOUS) if ((CCB = HostAdapter->BusDeviceResetPendingCCB[TargetID]) != NULL) { Command->reset_chain = CCB->Command; CCB->Command = Command; printk("scsi%d: Unable to Reset Command to Target %d - " "Reset Pending\n", HostAdapter->HostNumber, TargetID); Result = SCSI_RESET_PENDING; goto Done; } /* Firmware versions prior to 5.xx treat a Bus Device Reset as a non-tagged command. Since non-tagged commands are not sent by the Host Adapter until the queue of outstanding tagged commands has completed, it is effectively impossible to send a Bus Device Reset while there are tagged commands outstanding. Therefore, in that case a full Host Adapter Hard Reset and SCSI Bus Reset must be done. */ if (HostAdapter->TaggedQueuingActive[TargetID] && HostAdapter->ActiveCommandCount[TargetID] > 0 && HostAdapter->FirmwareVersion[0] < '5') goto Done; /* Allocate a CCB from the Host Adapter's free list. In the unlikely event that there are none available and memory allocation fails, attempt a full Host Adapter Hard Reset and SCSI Bus Reset. */ CCB = BusLogic_AllocateCCB(HostAdapter); if (CCB == NULL) goto Done; printk("scsi%d: Sending Bus Device Reset CCB #%ld to Target %d\n", HostAdapter->HostNumber, CCB->SerialNumber, TargetID); CCB->Opcode = BusLogic_BusDeviceReset; CCB->TargetID = TargetID; /* For Synchronous Resets, arrange for the interrupt handler to perform completion processing for the Command being Reset. */ if (ResetFlags & SCSI_RESET_SYNCHRONOUS) { Command->reset_chain = NULL; CCB->Command = Command; } /* Attempt to write an Outgoing Mailbox with the Bus Device Reset CCB. If sending a Bus Device Reset is impossible, attempt a full Host Adapter Hard Reset and SCSI Bus Reset. */ if (!(BusLogic_WriteOutgoingMailbox(HostAdapter, BusLogic_MailboxStartCommand, CCB))) { printk("scsi%d: cannot write Outgoing Mailbox for Bus Device Reset\n", HostAdapter->HostNumber); BusLogic_DeallocateCCB(CCB); goto Done; } /* If there is a currently executing CCB in the Host Adapter for this Command (i.e. this is an Asynchronous Reset), then an Incoming Mailbox entry may be made with a completion code of BusLogic_HostAdapterAssertedBusDeviceReset. If there is no active CCB for this Command (i.e. this is a Synchronous Reset), then the Bus Device Reset CCB's Command field will have been set to the Command so that the interrupt for the completion of the Bus Device Reset can call the Completion Routine for the Command. On successful execution of a Bus Device Reset, older firmware versions did return the pending CCBs with the appropriate completion code, but more recent firmware versions only return the Bus Device Reset CCB itself. This driver handles both cases by marking all the currently executing CCBs to this Target Device as Reset. When the Bus Device Reset CCB is processed by the interrupt handler, any remaining CCBs marked as Reset will have completion processing performed. */ HostAdapter->BusDeviceResetPendingCCB[TargetID] = CCB; HostAdapter->LastResetTime[TargetID] = jiffies; for (CCB = HostAdapter->All_CCBs; CCB != NULL; CCB = CCB->NextAll) if (CCB->Status == BusLogic_CCB_Active && CCB->TargetID == TargetID) CCB->Status = BusLogic_CCB_Reset; Result = SCSI_RESET_PENDING; /* If a Bus Device Reset was not possible for some reason, force a full Host Adapter Hard Reset and SCSI Bus Reset. */ Done: if (Result < 0) Result = BusLogic_ResetHostAdapter(HostAdapter, Command, ResetFlags); /* Release exclusive access to Host Adapter. */ BusLogic_ReleaseHostAdapterLock(HostAdapter, &Lock); return Result; } /* BusLogic_ResetCommand takes appropriate action to reset Command. */ int BusLogic_ResetCommand(SCSI_Command_T *Command, unsigned int ResetFlags) { BusLogic_HostAdapter_T *HostAdapter = (BusLogic_HostAdapter_T *) Command->host->hostdata; int TargetID = Command->target; int ErrorRecoveryStrategy = HostAdapter->ErrorRecoveryStrategy[TargetID]; /* Disable Tagged Queuing if it is active for this Target Device and if it has been less than 10 minutes since the last reset occurred, or since the system was initialized if no prior resets have occurred. */ if (HostAdapter->TaggedQueuingActive[TargetID] && jiffies - HostAdapter->LastResetTime[TargetID] < 10*60*HZ) { HostAdapter->TaggedQueuingPermitted &= ~(1 << TargetID); HostAdapter->TaggedQueuingActive[TargetID] = false; printk("scsi%d: Tagged Queuing now disabled for Target %d\n", HostAdapter->HostNumber, TargetID); } if (ErrorRecoveryStrategy == BusLogic_ErrorRecovery_Default) if (ResetFlags & SCSI_RESET_SUGGEST_HOST_RESET) ErrorRecoveryStrategy = BusLogic_ErrorRecovery_HardReset; else if (ResetFlags & SCSI_RESET_SUGGEST_BUS_RESET) ErrorRecoveryStrategy = BusLogic_ErrorRecovery_HardReset; else ErrorRecoveryStrategy = BusLogic_ErrorRecovery_BusDeviceReset; switch (ErrorRecoveryStrategy) { case BusLogic_ErrorRecovery_HardReset: return BusLogic_ResetHostAdapter(HostAdapter, Command, ResetFlags); case BusLogic_ErrorRecovery_BusDeviceReset: /* The Bus Device Reset Error Recovery Strategy only graduates to a Hard Reset when no commands have completed successfully since the last Bus Device Reset and it has been at least 100 milliseconds. This prevents a sequence of commands that all timeout together from immediately forcing a Hard Reset before the Bus Device Reset has had a chance to clear the error condition. */ if (HostAdapter->CommandSuccessfulFlag[TargetID] || jiffies - HostAdapter->LastResetTime[TargetID] < HZ/10) { HostAdapter->CommandSuccessfulFlag[TargetID] = false; return BusLogic_SendBusDeviceReset(HostAdapter, Command, ResetFlags); } else return BusLogic_ResetHostAdapter(HostAdapter, Command, ResetFlags); } printk("scsi%d: Error Recovery for Target %d Suppressed\n", HostAdapter->HostNumber, TargetID); return SCSI_RESET_PUNT; } /* BusLogic_BIOSDiskParameters returns the Heads/Sectors/Cylinders BIOS Disk Parameters for Disk. The default disk geometry is 64 heads, 32 sectors, and the appropriate number of cylinders so as not to exceed drive capacity. In order for disks equal to or larger than 1 GB to be addressable by the BIOS without exceeding the BIOS limitation of 1024 cylinders, Extended Translation may be enabled in AutoSCSI on "W" and "C" Series controllers or by a dip switch setting on older controllers. With Extended Translation enabled, drives between 1 GB inclusive and 2 GB exclusive are given a disk geometry of 128 heads and 32 sectors, and drives above 2 GB inclusive are given a disk geometry of 255 heads and 63 sectors. However, if the BIOS detects that the Extended Translation setting does not match the geometry in the partition table, then the translation inferred from the partition table will be used by the BIOS, and a warning may be displayed. */ int BusLogic_BIOSDiskParameters(SCSI_Disk_T *Disk, KernelDevice_T Device, int *Parameters) { BusLogic_HostAdapter_T *HostAdapter = (BusLogic_HostAdapter_T *) Disk->device->host->hostdata; BIOS_DiskParameters_T *DiskParameters = (BIOS_DiskParameters_T *) Parameters; struct buffer_head *BufferHead; if (HostAdapter->ExtendedTranslation && Disk->capacity >= 2*1024*1024 /* 1 GB in 512 byte sectors */) if (Disk->capacity >= 4*1024*1024 /* 2 GB in 512 byte sectors */) { DiskParameters->Heads = 255; DiskParameters->Sectors = 63; } else { DiskParameters->Heads = 128; DiskParameters->Sectors = 32; } else { DiskParameters->Heads = 64; DiskParameters->Sectors = 32; } DiskParameters->Cylinders = Disk->capacity / (DiskParameters->Heads * DiskParameters->Sectors); /* Attempt to read the first 1024 bytes from the disk device. */ BufferHead = bread(MKDEV(MAJOR(Device), MINOR(Device) & ~0x0F), 0, 1024); if (BufferHead == NULL) return 0; /* If the boot sector partition table flag is valid, search for a partition table entry whose end_head matches one of the standard BusLogic geometry translations (64/32, 128/32, or 255/63). */ if (*(unsigned short *) (BufferHead->b_data + 0x1FE) == 0xAA55) { struct partition *PartitionEntry = (struct partition *) (BufferHead->b_data + 0x1BE); int SavedCylinders = DiskParameters->Cylinders, PartitionNumber; for (PartitionNumber = 0; PartitionNumber < 4; PartitionNumber++) { if (PartitionEntry->end_head == 64-1) { DiskParameters->Heads = 64; DiskParameters->Sectors = 32; break; } else if (PartitionEntry->end_head == 128-1) { DiskParameters->Heads = 128; DiskParameters->Sectors = 32; break; } else if (PartitionEntry->end_head == 255-1) { DiskParameters->Heads = 255; DiskParameters->Sectors = 63; break; } PartitionEntry++; } DiskParameters->Cylinders = Disk->capacity / (DiskParameters->Heads * DiskParameters->Sectors); if (SavedCylinders != DiskParameters->Cylinders) printk("scsi%d: Warning: Extended Translation Setting " "(> 1GB Switch) does not match\n" "scsi%d: Partition Table - Adopting %d/%d Geometry " "from Partition Table\n", HostAdapter->HostNumber, HostAdapter->HostNumber, DiskParameters->Heads, DiskParameters->Sectors); } brelse(BufferHead); return 0; } /* BusLogic_Setup handles processing of Kernel Command Line Arguments. For the BusLogic driver, a Kernel command line entry comprises the driver identifier "BusLogic=" optionally followed by a comma-separated sequence of integers and then optionally followed by a comma-separated sequence of strings. Each command line entry applies to one BusLogic Host Adapter. Multiple command line entries may be used in systems which contain multiple BusLogic Host Adapters. The first integer specified is the I/O Address at which the Host Adapter is located. If unspecified, it defaults to 0 which means to apply this entry to the first BusLogic Host Adapter found during the default probe sequence. If any I/O Address parameters are provided on the command line, then the default probe sequence is omitted. The second integer specified is the Tagged Queue Depth to use for Target Devices that support Tagged Queuing. The Queue Depth is the number of SCSI commands that are allowed to be concurrently presented for execution. If unspecified, it defaults to 0 which means to use a value determined automatically based on the Host Adapter's Total Queue Depth and the number, type, speed, and capabilities of the detected Target Devices. For Host Adapters that require ISA Bounce Buffers, the Tagged Queue Depth is automatically set to BusLogic_TaggedQueueDepth_BB to avoid excessive preallocation of DMA Bounce Buffer memory. Target Devices that do not support Tagged Queuing use a Queue Depth of BusLogic_UntaggedQueueDepth. The third integer specified is the Bus Settle Time in seconds. This is the amount of time to wait between a Host Adapter Hard Reset which initiates a SCSI Bus Reset and issuing any SCSI Commands. If unspecified, it defaults to 0 which means to use the value of BusLogic_DefaultBusSettleTime. The fourth integer specified is the Local Options. If unspecified, it defaults to 0. Note that Local Options are only applied to a specific Host Adapter. The fifth integer specified is the Global Options. If unspecified, it defaults to 0. Note that Global Options are applied across all Host Adapters. The string options are used to provide control over Tagged Queuing, Error Recovery, and Host Adapter Probing. The Tagged Queuing specification begins with "TQ:" and allows for explicitly specifying whether Tagged Queuing is permitted on Target Devices that support it. The following specification options are available: TQ:Default Tagged Queuing will be permitted based on the firmware version of the BusLogic Host Adapter and based on whether the Tagged Queue Depth value allows queuing multiple commands. TQ:Enable Tagged Queuing will be enabled for all Target Devices on this Host Adapter overriding any limitation that would otherwise be imposed based on the Host Adapter firmware version. TQ:Disable Tagged Queuing will be disabled for all Target Devices on this Host Adapter. TQ: Tagged Queuing will be controlled individually for each Target Device. is a sequence of "Y", "N", and "X" characters. "Y" enabled Tagged Queuing, "N" disables Tagged Queuing, and "X" accepts the default based on the firmware version. The first character refers to Target Device 0, the second to Target Device 1, and so on; if the sequence of "Y", "N", and "X" characters does not cover all the Target Devices, unspecified characters are assumed to be "X". Note that explicitly requesting Tagged Queuing may lead to problems; this facility is provided primarily to allow disabling Tagged Queuing on Target Devices that do not implement it correctly. The Error Recovery Strategy specification begins with "ER:" and allows for explicitly specifying the Error Recovery action to be performed when ResetCommand is called due to a SCSI Command failing to complete successfully. The following specification options are available: ER:Default Error Recovery will select between the Hard Reset and Bus Device Reset options based on the recommendation of the SCSI Subsystem. ER:HardReset Error Recovery will initiate a Host Adapter Hard Reset which also causes a SCSI Bus Reset. ER:BusDeviceReset Error Recovery will send a Bus Device Reset message to the individual Target Device causing the error. If Error Recovery is again initiated for this Target Device and no SCSI Command to this Target Device has completed successfully since the Bus Device Reset message was sent, then a Hard Reset will be attempted. ER:None Error Recovery will be suppressed. This option should only be selected if a SCSI Bus Reset or Bus Device Reset will cause the Target Device to fail completely and unrecoverably. ER: Error Recovery will be controlled individually for each Target Device. is a sequence of "D", "H", "B", and "N" characters. "D" selects Default, "H" selects Hard Reset, "B" selects Bus Device Reset, and "N" selects None. The first character refers to Target Device 0, the second to Target Device 1, and so on; if the sequence of "D", "H", "B", and "N" characters does not cover all the possible Target Devices, unspecified characters are assumed to be "D". The Host Adapter Probing specification comprises the following strings: NoProbe No probing of any kind is to be performed, and hence no BusLogic Host Adapters will be detected. NoProbeISA No probing of the standard ISA I/O Addresses will be done, and hence only PCI Host Adapters will be detected. NoSortPCI PCI Host Adapters will be enumerated in the order provided by the PCI BIOS, ignoring any setting of the AutoSCSI "Use Bus And Device # For PCI Scanning Seq." option. */ void BusLogic_Setup(char *Strings, int *Integers) { BusLogic_CommandLineEntry_T *CommandLineEntry = &BusLogic_CommandLineEntries[BusLogic_CommandLineEntryCount++]; static int ProbeListIndex = 0; int IntegerCount = Integers[0]; int TargetID, i; CommandLineEntry->IO_Address = 0; CommandLineEntry->TaggedQueueDepth = 0; CommandLineEntry->BusSettleTime = 0; CommandLineEntry->LocalOptions = 0; CommandLineEntry->TaggedQueuingPermitted = 0; CommandLineEntry->TaggedQueuingPermittedMask = 0; memset(CommandLineEntry->ErrorRecoveryStrategy, BusLogic_ErrorRecovery_Default, sizeof(CommandLineEntry->ErrorRecoveryStrategy)); if (IntegerCount > 5) printk("BusLogic: Unexpected Command Line Integers ignored\n"); if (IntegerCount >= 1) { unsigned int IO_Address = Integers[1]; if (IO_Address > 0) { for (i = 0; ; i++) if (BusLogic_IO_StandardAddresses[i] == 0) { printk("BusLogic: Invalid Command Line Entry " "(illegal I/O Address 0x%X)\n", IO_Address); return; } else if (i < ProbeListIndex && IO_Address == BusLogic_IO_AddressProbeList[i]) { printk("BusLogic: Invalid Command Line Entry " "(duplicate I/O Address 0x%X)\n", IO_Address); return; } else if (IO_Address >= 0x400 || IO_Address == BusLogic_IO_StandardAddresses[i]) break; BusLogic_IO_AddressProbeList[ProbeListIndex++] = IO_Address; BusLogic_IO_AddressProbeList[ProbeListIndex] = 0; } CommandLineEntry->IO_Address = IO_Address; } if (IntegerCount >= 2) { unsigned short TaggedQueueDepth = Integers[2]; if (TaggedQueueDepth > BusLogic_MaxTaggedQueueDepth) { printk("BusLogic: Invalid Command Line Entry " "(illegal Tagged Queue Depth %d)\n", TaggedQueueDepth); return; } CommandLineEntry->TaggedQueueDepth = TaggedQueueDepth; } if (IntegerCount >= 3) CommandLineEntry->BusSettleTime = Integers[3]; if (IntegerCount >= 4) CommandLineEntry->LocalOptions = Integers[4]; if (IntegerCount >= 5) BusLogic_GlobalOptions |= Integers[5]; if (!(BusLogic_CommandLineEntryCount == 0 || ProbeListIndex == 0 || BusLogic_CommandLineEntryCount == ProbeListIndex)) { printk("BusLogic: Invalid Command Line Entry " "(all or no I/O Addresses must be specified)\n"); return; } if (Strings == NULL) return; while (*Strings != '\0') { if (strncmp(Strings, "TQ:", 3) == 0) { Strings += 3; if (strncmp(Strings, "Default", 7) == 0) Strings += 7; else if (strncmp(Strings, "Enable", 6) == 0) { Strings += 6; CommandLineEntry->TaggedQueuingPermitted = 0xFFFF; CommandLineEntry->TaggedQueuingPermittedMask = 0xFFFF; } else if (strncmp(Strings, "Disable", 7) == 0) { Strings += 7; CommandLineEntry->TaggedQueuingPermitted = 0x0000; CommandLineEntry->TaggedQueuingPermittedMask = 0xFFFF; } else for (TargetID = 0; TargetID < BusLogic_MaxTargetDevices; TargetID++) switch (*Strings++) { case 'Y': CommandLineEntry->TaggedQueuingPermitted |= 1 << TargetID; CommandLineEntry->TaggedQueuingPermittedMask |= 1 << TargetID; break; case 'N': CommandLineEntry->TaggedQueuingPermittedMask |= 1 << TargetID; break; case 'X': break; default: Strings--; TargetID = BusLogic_MaxTargetDevices; break; } } else if (strncmp(Strings, "ER:", 3) == 0) { Strings += 3; if (strncmp(Strings, "Default", 7) == 0) Strings += 7; else if (strncmp(Strings, "HardReset", 9) == 0) { Strings += 9; memset(CommandLineEntry->ErrorRecoveryStrategy, BusLogic_ErrorRecovery_HardReset, sizeof(CommandLineEntry->ErrorRecoveryStrategy)); } else if (strncmp(Strings, "BusDeviceReset", 14) == 0) { Strings += 14; memset(CommandLineEntry->ErrorRecoveryStrategy, BusLogic_ErrorRecovery_BusDeviceReset, sizeof(CommandLineEntry->ErrorRecoveryStrategy)); } else if (strncmp(Strings, "None", 4) == 0) { Strings += 4; memset(CommandLineEntry->ErrorRecoveryStrategy, BusLogic_ErrorRecovery_None, sizeof(CommandLineEntry->ErrorRecoveryStrategy)); } else for (TargetID = 0; TargetID < BusLogic_MaxTargetDevices; TargetID++) switch (*Strings++) { case 'D': CommandLineEntry->ErrorRecoveryStrategy[TargetID] = BusLogic_ErrorRecovery_Default; break; case 'H': CommandLineEntry->ErrorRecoveryStrategy[TargetID] = BusLogic_ErrorRecovery_HardReset; break; case 'B': CommandLineEntry->ErrorRecoveryStrategy[TargetID] = BusLogic_ErrorRecovery_BusDeviceReset; break; case 'N': CommandLineEntry->ErrorRecoveryStrategy[TargetID] = BusLogic_ErrorRecovery_None; break; default: Strings--; TargetID = BusLogic_MaxTargetDevices; break; } } else if (strcmp(Strings, "NoProbe") == 0 || strcmp(Strings, "noprobe") == 0) { Strings += 7; BusLogic_ProbeOptions |= BusLogic_NoProbe; } else if (strncmp(Strings, "NoProbeISA", 10) == 0) { Strings += 10; BusLogic_ProbeOptions |= BusLogic_NoProbeISA; } else if (strncmp(Strings, "NoSortPCI", 9) == 0) { Strings += 9; BusLogic_ProbeOptions |= BusLogic_NoSortPCI; } else { printk("BusLogic: Unexpected Command Line String '%s' ignored\n", Strings); break; } if (*Strings == ',') Strings++; } } /* Include Module support if requested. */ #ifdef MODULE SCSI_Host_Template_T driver_template = BUSLOGIC; #include "scsi_module.c" #endif