comment 'SCSI support type (disk, tape, CD-ROM)' dep_tristate 'SCSI disk support' CONFIG_BLK_DEV_SD $CONFIG_SCSI dep_tristate 'SCSI tape support' CONFIG_CHR_DEV_ST $CONFIG_SCSI dep_tristate 'SCSI CD-ROM support' CONFIG_BLK_DEV_SR $CONFIG_SCSI if [ "$CONFIG_BLK_DEV_SR" != "n" ]; then bool ' Enable vendor-specific extensions (for SCSI CDROM)' CONFIG_BLK_DEV_SR_VENDOR fi dep_tristate 'SCSI generic support' CONFIG_CHR_DEV_SG $CONFIG_SCSI comment 'Some SCSI devices (e.g. CD jukebox) support multiple LUNs' bool 'Probe all LUNs on each SCSI device' CONFIG_SCSI_MULTI_LUN bool 'Verbose SCSI error reporting (kernel size +=12K)' CONFIG_SCSI_CONSTANTS bool 'SCSI logging facility' CONFIG_SCSI_LOGGING mainmenu_option next_comment comment 'SCSI low-level drivers' dep_tristate '7000FASST SCSI support' CONFIG_SCSI_7000FASST $CONFIG_SCSI dep_tristate 'Adaptec AHA152X/2825 support' CONFIG_SCSI_AHA152X $CONFIG_SCSI dep_tristate 'Adaptec AHA1542 support' CONFIG_SCSI_AHA1542 $CONFIG_SCSI dep_tristate 'Adaptec AHA1740 support' CONFIG_SCSI_AHA1740 $CONFIG_SCSI dep_tristate 'Adaptec AIC7xxx support' CONFIG_SCSI_AIC7XXX $CONFIG_SCSI if [ "$CONFIG_SCSI_AIC7XXX" != "n" ]; then bool ' Override driver defaults for commands per LUN' CONFIG_OVERRIDE_CMDS N if [ "$CONFIG_OVERRIDE_CMDS" != "n" ]; then int ' Maximum number of commands per LUN' CONFIG_AIC7XXX_CMDS_PER_LUN 24 fi bool ' Collect statistics to report in /proc' CONFIG_AIC7XXX_PROC_STATS N int ' Delay in seconds after SCSI bus reset' CONFIG_AIC7XXX_RESET_DELAY 5 fi dep_tristate 'AdvanSys SCSI support' CONFIG_SCSI_ADVANSYS $CONFIG_SCSI dep_tristate 'Always IN2000 SCSI support' CONFIG_SCSI_IN2000 $CONFIG_SCSI dep_tristate 'AM53/79C974 PCI SCSI support' CONFIG_SCSI_AM53C974 $CONFIG_SCSI dep_tristate 'BusLogic SCSI support' CONFIG_SCSI_BUSLOGIC $CONFIG_SCSI if [ "$CONFIG_SCSI_BUSLOGIC" != "n" ]; then bool ' Omit FlashPoint support' CONFIG_SCSI_OMIT_FLASHPOINT fi dep_tristate 'DTC3180/3280 SCSI support' CONFIG_SCSI_DTC3280 $CONFIG_SCSI dep_tristate 'EATA-DMA (DPT, NEC, AT&T, SNI, AST, Olivetti, Alphatronix) support' CONFIG_SCSI_EATA_DMA $CONFIG_SCSI dep_tristate 'EATA-PIO (old DPT PM2001, PM2012A) support' CONFIG_SCSI_EATA_PIO $CONFIG_SCSI dep_tristate 'EATA ISA/EISA/PCI (DPT and generic EATA/DMA-compliant boards) support' CONFIG_SCSI_EATA $CONFIG_SCSI if [ "$CONFIG_SCSI_EATA" != "n" ]; then bool ' enable tagged command queueing' CONFIG_SCSI_EATA_TAGGED_QUEUE bool ' enable elevator sorting' CONFIG_SCSI_EATA_LINKED_COMMANDS int ' maximum number of queued commands' CONFIG_SCSI_EATA_MAX_TAGS 16 fi dep_tristate 'Future Domain 16xx SCSI/AHA 2920 support' CONFIG_SCSI_FUTURE_DOMAIN $CONFIG_SCSI if [ "$CONFIG_MCA" = "y" ]; then if [ "$CONFIG_SCSI" = "y" ]; then bool 'Future Domain MCS-600/700 SCSI support' CONFIG_SCSI_FD_MCS fi fi dep_tristate 'GDT SCSI Disk Array Controller support' CONFIG_SCSI_GDTH $CONFIG_SCSI dep_tristate 'Generic NCR5380/53c400 SCSI support' CONFIG_SCSI_GENERIC_NCR5380 $CONFIG_SCSI if [ "$CONFIG_PARPORT" != "n" ]; then dep_tristate 'IOMEGA Parallel Port ZIP drive SCSI support' CONFIG_SCSI_PPA $CONFIG_SCSI $CONFIG_PARPORT if [ "$CONFIG_SCSI_PPA" != "n" ]; then bool ' Pedantic EPP-checking' CONFIG_SCSI_PPA_HAVE_PEDANTIC fi dep_tristate 'IOMEGA ZIP Plus drive SCSI support' CONFIG_SCSI_IMM $CONFIG_SCSI $CONFIG_PARPORT fi if [ "$CONFIG_SCSI_GENERIC_NCR5380" != "n" ]; then bool ' Enable NCR53c400 extensions' CONFIG_SCSI_GENERIC_NCR53C400 choice 'NCR5380/53c400 mapping method (use Port for T130B)' \ "Port CONFIG_SCSI_G_NCR5380_PORT \ Memory CONFIG_SCSI_G_NCR5380_MEM" Port fi dep_tristate 'NCR53c406a SCSI support' CONFIG_SCSI_NCR53C406A $CONFIG_SCSI if [ "$CONFIG_PCI" = "y" ]; then dep_tristate 'NCR53c7,8xx SCSI support' CONFIG_SCSI_NCR53C7xx $CONFIG_SCSI if [ "$CONFIG_SCSI_NCR53C7xx" != "n" ]; then bool ' always negotiate synchronous transfers' CONFIG_SCSI_NCR53C7xx_sync bool ' allow FAST-SCSI [10MHz]' CONFIG_SCSI_NCR53C7xx_FAST bool ' allow DISCONNECT' CONFIG_SCSI_NCR53C7xx_DISCONNECT fi fi if [ "$CONFIG_PCI" = "y" -a "$CONFIG_SCSI_NCR53C7xx" != "y" ]; then dep_tristate 'NCR53C8XX SCSI support' CONFIG_SCSI_NCR53C8XX $CONFIG_SCSI if [ "$CONFIG_SCSI_NCR53C8XX" != "n" ]; then int ' default tagged command queue depth' CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS 8 int ' maximum number of queued commands' CONFIG_SCSI_NCR53C8XX_MAX_TAGS 32 int ' synchronous transfers frequency in MHz' CONFIG_SCSI_NCR53C8XX_SYNC 20 bool ' enable profiling' CONFIG_SCSI_NCR53C8XX_PROFILE bool ' use normal IO' CONFIG_SCSI_NCR53C8XX_IOMAPPED if [ "$CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS" = "0" ]; then bool ' not allow targets to disconnect' CONFIG_SCSI_NCR53C8XX_NO_DISCONNECT fi if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then bool ' assume boards are SYMBIOS compatible' CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT fi fi fi if [ "$CONFIG_MCA" = "y" ]; then dep_tristate 'IBMMCA SCSI support' CONFIG_SCSI_IBMMCA $CONFIG_SCSI if [ "$CONFIG_SCSI_IBMMCA" != "n" ]; then bool ' Standard SCSI-order' CONFIG_IBMMCA_SCSI_ORDER_STANDARD bool ' Reset SCSI-devices at boottime' CONFIG_IBMMCA_SCSI_DEV_RESET fi fi dep_tristate 'PAS16 SCSI support' CONFIG_SCSI_PAS16 $CONFIG_SCSI dep_tristate 'PCI2000 support' CONFIG_SCSI_PCI2000 $CONFIG_SCSI dep_tristate 'PCI2220i support' CONFIG_SCSI_PCI2220I $CONFIG_SCSI dep_tristate 'PSI240i support' CONFIG_SCSI_PSI240I $CONFIG_SCSI dep_tristate 'Qlogic FAS SCSI support' CONFIG_SCSI_QLOGIC_FAS $CONFIG_SCSI if [ "$CONFIG_PCI" = "y" ]; then dep_tristate 'Qlogic ISP SCSI support' CONFIG_SCSI_QLOGIC_ISP $CONFIG_SCSI fi dep_tristate 'Seagate ST-02 and Future Domain TMC-8xx SCSI support' CONFIG_SCSI_SEAGATE $CONFIG_SCSI if [ "$CONFIG_PCI" = "y" ]; then dep_tristate 'Tekram DC390(T) and Am53/79C974 SCSI support' CONFIG_SCSI_DC390T $CONFIG_SCSI if [ "$CONFIG_SCSI_DC390T" != "n" ]; then bool ' _omit_ support for non-DC390 adapters' CONFIG_SCSI_DC390T_NOGENSUPP fi fi dep_tristate 'Trantor T128/T128F/T228 SCSI support' CONFIG_SCSI_T128 $CONFIG_SCSI dep_tristate 'UltraStor 14F/34F support' CONFIG_SCSI_U14_34F $CONFIG_SCSI if [ "$CONFIG_SCSI_U14_34F" != "n" ]; then bool ' enable elevator sorting' CONFIG_SCSI_U14_34F_LINKED_COMMANDS int ' maximum number of queued commands' CONFIG_SCSI_U14_34F_MAX_TAGS 8 fi dep_tristate 'UltraStor SCSI support' CONFIG_SCSI_ULTRASTOR $CONFIG_SCSI # # Note - this is a very special 'host' adapter that simulates the presence of some disks. # It can come in very handy for troubleshooting. Anyone else is welcome to use it - all # you do is hack it to simulate the condition you want to test for, and then use it. # # The actual configuration in any kernel release could change at any time as I hack it to # simulate various conditions that I am testing. # if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then dep_tristate 'SCSI debugging host adapter' CONFIG_SCSI_DEBUG $CONFIG_SCSI fi if [ "$CONFIG_PPC" = "y" ]; then dep_tristate 'MESH (Power Mac internal SCSI) support' CONFIG_SCSI_MESH $CONFIG_SCSI if [ "$CONFIG_SCSI_MESH" != "n" ]; then int ' maximum synchronous transfer rate (MB/s) (0 = async)' CONFIG_SCSI_MESH_SYNC_RATE 5 fi dep_tristate '53C94 (Power Mac external SCSI) support' CONFIG_SCSI_MAC53C94 $CONFIG_SCSI fi if [ "$CONFIG_ARCH_ACORN" = "y" ]; then source drivers/acorn/scsi/Config.in fi if [ "$CONFIG_MIPS_JAZZ" = "y" ]; then bool 'MIPS JAZZ FAS216 SCSI support' CONFIG_JAZZ_ESP fi endmenu