/*+M************************************************************************* * Adaptec AIC7xxx device driver proc support for Linux. * * Copyright (c) 1995, 1996 Dean W. Gehnert * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2, or (at your option) * any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; see the file COPYING. If not, write to * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. * * ---------------------------------------------------------------- * o Modified from the EATA-DMA /proc support. * o Additional support for device block statistics provided by * Matthew Jacob. * * Dean W. Gehnert, deang@teleport.com, 05/01/96 * * $Id: aic7xxx_proc.c,v 4.0 1996/10/13 08:23:42 deang Exp $ *-M*************************************************************************/ #define BLS buffer + len + size #define HDRB \ " < 512 512-1K 1-2K 2-4K 4-8K 8-16K 16-32K 32-64K 64-128K >128K" #ifdef PROC_DEBUG extern int vsprintf(char *, const char *, va_list); static void proc_debug(const char *fmt, ...) { va_list ap; char buf[256]; va_start(ap, fmt); vsprintf(buf, fmt, ap); printk(buf); va_end(ap); } #else /* PROC_DEBUG */ # define proc_debug(fmt, args...) #endif /* PROC_DEBUG */ /*+F************************************************************************* * Function: * aic7xxx_set_info * * Description: * Set parameters for the driver from the /proc filesystem. *-F*************************************************************************/ int aic7xxx_set_info(char *buffer, int length, struct Scsi_Host *HBAptr) { proc_debug("aic7xxx_set_info(): %s\n", buffer); return (-ENOSYS); /* Currently this is a no-op */ } /*+F************************************************************************* * Function: * aic7xxx_proc_info * * Description: * Return information to handle /proc support for the driver. *-F*************************************************************************/ int aic7xxx_proc_info(char *buffer, char **start, off_t offset, int length, int hostno, int inout) { struct Scsi_Host *HBAptr; struct aic7xxx_host *p; static u8 buff[512]; int i; int size = 0; int len = 0; off_t begin = 0; off_t pos = 0; static char *bus_names[] = { "Single", "Twin", "Wide" }; static char *chip_names[] = { "AIC-777x", "AIC-785x", "AIC-787x", "AIC-788x" }; HBAptr = NULL; for (i = 0; i < NUMBER(aic7xxx_boards); i++) { if ((HBAptr = aic7xxx_boards[i]) != NULL) { if (HBAptr->host_no == hostno) { break; } while ((HBAptr->hostdata != NULL) && ((HBAptr = ((struct aic7xxx_host *) HBAptr->hostdata)->next) != NULL)) { if (HBAptr->host_no == hostno) { break; break; } } HBAptr = NULL; } } if (HBAptr == NULL) { size += sprintf(BLS, "Can't find adapter for host number %d\n", hostno); len += size; pos = begin + len; size = 0; goto stop_output; } if (inout == TRUE) /* Has data been written to the file? */ { return (aic7xxx_set_info(buffer, length, HBAptr)); } if (offset == 0) { memset(buff, 0, sizeof(buff)); } p = (struct aic7xxx_host *) HBAptr->hostdata; size += sprintf(BLS, "Adaptec AIC7xxx driver version: "); size += sprintf(BLS, "%s/", rcs_version(AIC7XXX_C_VERSION)); size += sprintf(BLS, "%s/", rcs_version(AIC7XXX_H_VERSION)); size += sprintf(BLS, "%s\n", rcs_version(AIC7XXX_SEQ_VER)); len += size; pos = begin + len; size = 0; size += sprintf(BLS, "\n"); size += sprintf(BLS, "Compile Options:\n"); #ifdef AIC7XXX_RESET_DELAY size += sprintf(BLS, " AIC7XXX_RESET_DELAY : %d\n", AIC7XXX_RESET_DELAY); #endif #ifdef AIC7XXX_CMDS_PER_LUN size += sprintf(BLS, " AIC7XXX_CMDS_PER_LUN : %d\n", AIC7XXX_CMDS_PER_LUN); #endif #ifdef AIC7XXX_TWIN_SUPPORT size += sprintf(BLS, " AIC7XXX_TWIN_SUPPORT : Enabled\n"); #else size += sprintf(BLS, " AIC7XXX_TWIN_SUPPORT : Disabled\n"); #endif #ifdef AIC7XXX_TAGGED_QUEUEING size += sprintf(BLS, " AIC7XXX_TAGGED_QUEUEING: Enabled\n"); #else size += sprintf(BLS, " AIC7XXX_TAGGED_QUEUEING: Disabled\n"); #endif #ifdef AIC7XXX_PAGE_ENABLE size += sprintf(BLS, " AIC7XXX_PAGE_ENABLE : Enabled\n"); #else size += sprintf(BLS, " AIC7XXX_PAGE_ENABLE : Disabled\n"); #endif #ifdef AIC7XXX_PROC_STATS size += sprintf(BLS, " AIC7XXX_PROC_STATS : Enabled\n"); #else size += sprintf(BLS, " AIC7XXX_PROC_STATS : Disabled\n"); #endif len += size; pos = begin + len; size = 0; size += sprintf(BLS, "\n"); size += sprintf(BLS, "Adapter Configuration:\n"); size += sprintf(BLS, " SCSI Adapter: %s\n", board_names[p->type]); size += sprintf(BLS, " (%s chipset)\n", chip_names[p->chip_type]); size += sprintf(BLS, " Host Bus: %s\n", bus_names[p->bus_type]); size += sprintf(BLS, " Base IO: %#.4x\n", p->base); size += sprintf(BLS, " IRQ: %d\n", HBAptr->irq); size += sprintf(BLS, " SCBs: Used %d, HW %d, Page %d\n", p->scb_link->numscbs, p->maxhscbs, p->maxscbs); size += sprintf(BLS, " Interrupts: %d", p->isr_count); if (p->chip_type == AIC_777x) { size += sprintf(BLS, " %s\n", (p->pause & IRQMS) ? "(Level Sensitive)" : "(Edge Triggered)"); } else { size += sprintf(BLS, "\n"); } size += sprintf(BLS, " Serial EEPROM: %s\n", (p->flags & HAVE_SEEPROM) ? "True" : "False"); size += sprintf(BLS, " Extended Translation: %sabled\n", (p->flags & EXTENDED_TRANSLATION) ? "En" : "Dis"); size += sprintf(BLS, " SCSI Bus Reset: %sabled\n", aic7xxx_no_reset ? "Dis" : "En"); size += sprintf(BLS, " Ultra SCSI: %sabled\n", (p->flags & ULTRA_ENABLED) ? "En" : "Dis"); size += sprintf(BLS, " Target Disconnect: %sabled\n", p->discenable ? "En" : "Dis"); len += size; pos = begin + len; size = 0; #ifdef AIC7XXX_PROC_STATS { struct aic7xxx_xferstats *sp; int channel, target, lun; /* * XXX: Need to fix this to avoid overflow... */ size += sprintf(BLS, "\n"); size += sprintf(BLS, "Statistics:\n"); for (channel = 0; channel < 2; channel++) { for (target = 0; target < 16; target++) { for (lun = 0; lun < 8; lun++) { sp = &p->stats[channel][target][lun]; if (sp->xfers == 0) { continue; } size += sprintf(BLS, "CHAN#%c (TGT %d LUN %d):\n", 'A' + channel, target, lun); size += sprintf(BLS, "nxfers %ld (%ld read;%ld written)\n", sp->xfers, sp->r_total, sp->w_total); size += sprintf(BLS, "blks(512) rd=%ld; blks(512) wr=%ld\n", sp->r_total512, sp->w_total512); size += sprintf(BLS, "%s\n", HDRB); size += sprintf(BLS, " Reads:"); size += sprintf(BLS, "%6ld %6ld %6ld %6ld ", sp->r_bins[0], sp->r_bins[1], sp->r_bins[2], sp->r_bins[3]); size += sprintf(BLS, "%6ld %6ld %6ld %6ld ", sp->r_bins[4], sp->r_bins[5], sp->r_bins[6], sp->r_bins[7]); size += sprintf(BLS, "%6ld %6ld\n", sp->r_bins[8], sp->r_bins[9]); size += sprintf(BLS, "Writes:"); size += sprintf(BLS, "%6ld %6ld %6ld %6ld ", sp->w_bins[0], sp->w_bins[1], sp->w_bins[2], sp->w_bins[3]); size += sprintf(BLS, "%6ld %6ld %6ld %6ld ", sp->w_bins[4], sp->w_bins[5], sp->w_bins[6], sp->w_bins[7]); size += sprintf(BLS, "%6ld %6ld\n", sp->w_bins[8], sp->w_bins[9]); size += sprintf(BLS, "\n"); } } } len += size; pos = begin + len; size = 0; } #endif /* AIC7XXX_PROC_STATS */ stop_output: proc_debug("2pos: %ld offset: %ld len: %d\n", pos, offset, len); *start = buffer + (offset - begin); /* Start of wanted data */ len -= (offset - begin); /* Start slop */ if (len > length) { len = length; /* Ending slop */ } proc_debug("3pos: %ld offset: %ld len: %d\n", pos, offset, len); return (len); } /* * Overrides for Emacs so that we follow Linus's tabbing style. * Emacs will notice this stuff at the end of the file and automatically * adjust the settings for this buffer only. This must remain at the end * of the file. * --------------------------------------------------------------------------- * Local variables: * c-indent-level: 2 * c-brace-imaginary-offset: 0 * c-brace-offset: -2 * c-argdecl-indent: 2 * c-label-offset: -2 * c-continued-statement-offset: 2 * c-continued-brace-offset: 0 * indent-tabs-mode: nil * tab-width: 8 * End: */