/* * in2000.h - Linux device driver definitions for the * Always IN2000 ISA SCSI card. * * IMPORTANT: This file is for version 1.32 - 28/Mar/1998 * * Copyright (c) 1996 John Shifflett, GeoLog Consulting * john@geolog.com * jshiffle@netcom.com * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2, or (at your option) * any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * */ #ifndef IN2000_H #define IN2000_H #include #define PROC_INTERFACE /* add code for /proc/scsi/in2000/xxx interface */ #ifdef PROC_INTERFACE #define PROC_STATISTICS /* add code for keeping various real time stats */ #endif #define SYNC_DEBUG /* extra info on sync negotiation printed */ #define DEBUGGING_ON /* enable command-line debugging bitmask */ #define DEBUG_DEFAULTS 0 /* default bitmask - change from command-line */ #define FAST_READ_IO /* No problems with these on my machine */ #define FAST_WRITE_IO #ifdef DEBUGGING_ON #define DB(f,a) if (hostdata->args & (f)) a; #define CHECK_NULL(p,s) /* if (!(p)) {printk("\n"); while (1) printk("NP:%s\r",(s));} */ #else #define DB(f,a) #define CHECK_NULL(p,s) #endif #define uchar unsigned char #define read1_io(a) (inb(hostdata->io_base+(a))) #define read2_io(a) (inw(hostdata->io_base+(a))) #define write1_io(b,a) (outb((b),hostdata->io_base+(a))) #define write2_io(w,a) (outw((w),hostdata->io_base+(a))) /* These inline assembly defines are derived from a patch * sent to me by Bill Earnest. He's done a lot of very * valuable thinking, testing, and coding during his effort * to squeeze more speed out of this driver. I really think * that we are doing IO at close to the maximum now with * the fifo. (And yes, insw uses 'edi' while outsw uses * 'esi'. Thanks Bill!) */ #define FAST_READ2_IO() \ __asm__ __volatile__ ("\n \ cld \n \ orl %%ecx, %%ecx \n \ jz 1f \n \ rep \n \ insw %%dx \n \ 1: " \ : "=D" (sp) /* output */ \ : "d" (f), "D" (sp), "c" (i) /* input */ \ : "edx", "ecx", "edi" ) /* trashed */ #define FAST_WRITE2_IO() \ __asm__ __volatile__ ("\n \ cld \n \ orl %%ecx, %%ecx \n \ jz 1f \n \ rep \n \ outsw %%dx \n \ 1: " \ : "=S" (sp) /* output */ \ : "d" (f), "S" (sp), "c" (i) /* input */ \ : "edx", "ecx", "esi" ) /* trashed */ /* IN2000 io_port offsets */ #define IO_WD_ASR 0x00 /* R - 3393 auxstat reg */ #define ASR_INT 0x80 #define ASR_LCI 0x40 #define ASR_BSY 0x20 #define ASR_CIP 0x10 #define ASR_PE 0x02 #define ASR_DBR 0x01 #define IO_WD_ADDR 0x00 /* W - 3393 address reg */ #define IO_WD_DATA 0x01 /* R/W - rest of 3393 regs */ #define IO_FIFO 0x02 /* R/W - in2000 dual-port fifo (16 bits) */ #define IN2000_FIFO_SIZE 2048 /* fifo capacity in bytes */ #define IO_CARD_RESET 0x03 /* W - in2000 start master reset */ #define IO_FIFO_COUNT 0x04 /* R - in2000 fifo counter */ #define IO_FIFO_WRITE 0x05 /* W - clear fifo counter, start write */ #define IO_FIFO_READ 0x07 /* W - start fifo read */ #define IO_LED_OFF 0x08 /* W - turn off in2000 activity LED */ #define IO_SWITCHES 0x08 /* R - read in2000 dip switch */ #define SW_ADDR0 0x01 /* bit 0 = bit 0 of index to io addr */ #define SW_ADDR1 0x02 /* bit 1 = bit 1 of index io addr */ #define SW_DISINT 0x04 /* bit 2 true if ints disabled */ #define SW_INT0 0x08 /* bit 3 = bit 0 of index to interrupt */ #define SW_INT1 0x10 /* bit 4 = bit 1 of index to interrupt */ #define SW_INT_SHIFT 3 /* shift right this amount to right justify int bits */ #define SW_SYNC_DOS5 0x20 /* bit 5 used by Always BIOS */ #define SW_FLOPPY 0x40 /* bit 6 true if floppy enabled */ #define SW_BIT7 0x80 /* bit 7 hardwired true (ground) */ #define IO_LED_ON 0x09 /* W - turn on in2000 activity LED */ #define IO_HARDWARE 0x0a /* R - read in2000 hardware rev, stop reset */ #define IO_INTR_MASK 0x0c /* W - in2000 interrupt mask reg */ #define IMASK_WD 0x01 /* WD33c93 interrupt mask */ #define IMASK_FIFO 0x02 /* FIFO interrupt mask */ /* wd register names */ #define WD_OWN_ID 0x00 #define WD_CONTROL 0x01 #define WD_TIMEOUT_PERIOD 0x02 #define WD_CDB_1 0x03 #define WD_CDB_2 0x04 #define WD_CDB_3 0x05 #define WD_CDB_4 0x06 #define WD_CDB_5 0x07 #define WD_CDB_6 0x08 #define WD_CDB_7 0x09 #define WD_CDB_8 0x0a #define WD_CDB_9 0x0b #define WD_CDB_10 0x0c #define WD_CDB_11 0x0d #define WD_CDB_12 0x0e #define WD_TARGET_LUN 0x0f #define WD_COMMAND_PHASE 0x10 #define WD_SYNCHRONOUS_TRANSFER 0x11 #define WD_TRANSFER_COUNT_MSB 0x12 #define WD_TRANSFER_COUNT 0x13 #define WD_TRANSFER_COUNT_LSB 0x14 #define WD_DESTINATION_ID 0x15 #define WD_SOURCE_ID 0x16 #define WD_SCSI_STATUS 0x17 #define WD_COMMAND 0x18 #define WD_DATA 0x19 #define WD_QUEUE_TAG 0x1a #define WD_AUXILIARY_STATUS 0x1f /* WD commands */ #define WD_CMD_RESET 0x00 #define WD_CMD_ABORT 0x01 #define WD_CMD_ASSERT_ATN 0x02 #define WD_CMD_NEGATE_ACK 0x03 #define WD_CMD_DISCONNECT 0x04 #define WD_CMD_RESELECT 0x05 #define WD_CMD_SEL_ATN 0x06 #define WD_CMD_SEL 0x07 #define WD_CMD_SEL_ATN_XFER 0x08 #define WD_CMD_SEL_XFER 0x09 #define WD_CMD_RESEL_RECEIVE 0x0a #define WD_CMD_RESEL_SEND 0x0b #define WD_CMD_WAIT_SEL_RECEIVE 0x0c #define WD_CMD_TRANS_ADDR 0x18 #define WD_CMD_TRANS_INFO 0x20 #define WD_CMD_TRANSFER_PAD 0x21 #define WD_CMD_SBT_MODE 0x80 /* SCSI Bus Phases */ #define PHS_DATA_OUT 0x00 #define PHS_DATA_IN 0x01 #define PHS_COMMAND 0x02 #define PHS_STATUS 0x03 #define PHS_MESS_OUT 0x06 #define PHS_MESS_IN 0x07 /* Command Status Register definitions */ /* reset state interrupts */ #define CSR_RESET 0x00 #define CSR_RESET_AF 0x01 /* successful completion interrupts */ #define CSR_RESELECT 0x10 #define CSR_SELECT 0x11 #define CSR_SEL_XFER_DONE 0x16 #define CSR_XFER_DONE 0x18 /* paused or aborted interrupts */ #define CSR_MSGIN 0x20 #define CSR_SDP 0x21 #define CSR_SEL_ABORT 0x22 #define CSR_RESEL_ABORT 0x25 #define CSR_RESEL_ABORT_AM 0x27 #define CSR_ABORT 0x28 /* terminated interrupts */ #define CSR_INVALID 0x40 #define CSR_UNEXP_DISC 0x41 #define CSR_TIMEOUT 0x42 #define CSR_PARITY 0x43 #define CSR_PARITY_ATN 0x44 #define CSR_BAD_STATUS 0x45 #define CSR_UNEXP 0x48 /* service required interrupts */ #define CSR_RESEL 0x80 #define CSR_RESEL_AM 0x81 #define CSR_DISC 0x85 #define CSR_SRV_REQ 0x88 /* Own ID/CDB Size register */ #define OWNID_EAF 0x08 #define OWNID_EHP 0x10 #define OWNID_RAF 0x20 #define OWNID_FS_8 0x00 #define OWNID_FS_12 0x40 #define OWNID_FS_16 0x80 /* Control register */ #define CTRL_HSP 0x01 #define CTRL_HA 0x02 #define CTRL_IDI 0x04 #define CTRL_EDI 0x08 #define CTRL_HHP 0x10 #define CTRL_POLLED 0x00 #define CTRL_BURST 0x20 #define CTRL_BUS 0x40 #define CTRL_DMA 0x80 /* Timeout Period register */ #define TIMEOUT_PERIOD_VALUE 20 /* results in 200 ms. */ /* Synchronous Transfer Register */ #define STR_FSS 0x80 /* Destination ID register */ #define DSTID_DPD 0x40 #define DATA_OUT_DIR 0 #define DATA_IN_DIR 1 #define DSTID_SCC 0x80 /* Source ID register */ #define SRCID_MASK 0x07 #define SRCID_SIV 0x08 #define SRCID_DSP 0x20 #define SRCID_ES 0x40 #define SRCID_ER 0x80 #define ILLEGAL_STATUS_BYTE 0xff #define DEFAULT_SX_PER 500 /* (ns) fairly safe */ #define DEFAULT_SX_OFF 0 /* aka async */ #define OPTIMUM_SX_PER 252 /* (ns) best we can do (mult-of-4) */ #define OPTIMUM_SX_OFF 12 /* size of in2000 fifo */ struct sx_period { unsigned int period_ns; uchar reg_value; }; struct IN2000_hostdata { struct Scsi_Host *next; uchar chip; /* what kind of wd33c93 chip? */ uchar microcode; /* microcode rev if 'B' */ unsigned short io_base; /* IO port base */ unsigned int dip_switch; /* dip switch settings */ unsigned int hrev; /* hardware revision of card */ volatile uchar busy[8]; /* index = target, bit = lun */ volatile Scsi_Cmnd *input_Q; /* commands waiting to be started */ volatile Scsi_Cmnd *selecting; /* trying to select this command */ volatile Scsi_Cmnd *connected; /* currently connected command */ volatile Scsi_Cmnd *disconnected_Q;/* commands waiting for reconnect */ uchar state; /* what we are currently doing */ uchar fifo; /* what the FIFO is up to */ uchar level2; /* extent to which Level-2 commands are used */ uchar disconnect; /* disconnect/reselect policy */ unsigned int args; /* set from command-line argument */ uchar incoming_msg[8]; /* filled during message_in phase */ int incoming_ptr; /* mainly used with EXTENDED messages */ uchar outgoing_msg[8]; /* send this during next message_out */ int outgoing_len; /* length of outgoing message */ unsigned int default_sx_per; /* default transfer period for SCSI bus */ uchar sync_xfer[8]; /* sync_xfer reg settings per target */ uchar sync_stat[8]; /* status of sync negotiation per target */ uchar sync_off; /* bit mask: don't use sync with these targets */ #ifdef PROC_INTERFACE uchar proc; /* bit mask: what's in proc output */ #ifdef PROC_STATISTICS unsigned long cmd_cnt[8]; /* # of commands issued per target */ unsigned long int_cnt; /* # of interrupts serviced */ unsigned long disc_allowed_cnt[8]; /* # of disconnects allowed per target */ unsigned long disc_done_cnt[8]; /* # of disconnects done per target*/ #endif #endif }; /* defines for hostdata->chip */ #define C_WD33C93 0 #define C_WD33C93A 1 #define C_WD33C93B 2 #define C_UNKNOWN_CHIP 100 /* defines for hostdata->state */ #define S_UNCONNECTED 0 #define S_SELECTING 1 #define S_RUNNING_LEVEL2 2 #define S_CONNECTED 3 #define S_PRE_TMP_DISC 4 #define S_PRE_CMP_DISC 5 /* defines for hostdata->fifo */ #define FI_FIFO_UNUSED 0 #define FI_FIFO_READING 1 #define FI_FIFO_WRITING 2 /* defines for hostdata->level2 */ /* NOTE: only the first 3 are trustworthy at this point - * having trouble when more than 1 device is reading/writing * at the same time... */ #define L2_NONE 0 /* no combination commands - we get lots of ints */ #define L2_SELECT 1 /* start with SEL_ATN_XFER, but never resume it */ #define L2_BASIC 2 /* resume after STATUS ints & RDP messages */ #define L2_DATA 3 /* resume after DATA_IN/OUT ints */ #define L2_MOST 4 /* resume after anything except a RESELECT int */ #define L2_RESELECT 5 /* resume after everything, including RESELECT ints */ #define L2_ALL 6 /* always resume */ /* defines for hostdata->disconnect */ #define DIS_NEVER 0 #define DIS_ADAPTIVE 1 #define DIS_ALWAYS 2 /* defines for hostdata->args */ #define DB_TEST 1<<0 #define DB_FIFO 1<<1 #define DB_QUEUE_COMMAND 1<<2 #define DB_EXECUTE 1<<3 #define DB_INTR 1<<4 #define DB_TRANSFER 1<<5 #define DB_MASK 0x3f #define A_NO_SCSI_RESET 1<<15 /* defines for hostdata->sync_xfer[] */ #define SS_UNSET 0 #define SS_FIRST 1 #define SS_WAITING 2 #define SS_SET 3 /* defines for hostdata->proc */ #define PR_VERSION 1<<0 #define PR_INFO 1<<1 #define PR_STATISTICS 1<<2 #define PR_CONNECTED 1<<3 #define PR_INPUTQ 1<<4 #define PR_DISCQ 1<<5 #define PR_TEST 1<<6 #define PR_STOP 1<<7 int in2000_detect(Scsi_Host_Template *); int in2000_queuecommand(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *)); int in2000_abort(Scsi_Cmnd *); void in2000_setup(char *, int *); int in2000_proc_info(char *, char **, off_t, int, int, int); struct proc_dir_entry proc_scsi_in2000; int in2000_biosparam(struct scsi_disk *, kdev_t, int *); int in2000_reset(Scsi_Cmnd *, unsigned int); #define IN2000_CAN_Q 16 #define IN2000_SG SG_ALL #define IN2000_CPL 2 #define IN2000_HOST_ID 7 #define IN2000 { proc_dir: &proc_scsi_in2000, /* pointer to /proc/scsi directory entry */ \ proc_info: in2000_proc_info, /* pointer to proc info function */ \ name: "Always IN2000", /* device name */ \ detect: in2000_detect, /* returns number of in2000's found */ \ queuecommand: in2000_queuecommand, /* queue scsi command, don't wait */ \ abort: in2000_abort, /* abort current command */ \ reset: in2000_reset, /* reset scsi bus */ \ bios_param: in2000_biosparam, /* figures out BIOS parameters for lilo, etc */ \ can_queue: IN2000_CAN_Q, /* max commands we can queue up */ \ this_id: IN2000_HOST_ID, /* host-adapter scsi id */ \ sg_tablesize: IN2000_SG, /* scatter-gather table size */ \ cmd_per_lun: IN2000_CPL, /* commands per lun */ \ use_clustering: DISABLE_CLUSTERING, /* ENABLE_CLUSTERING may speed things up */ \ use_new_eh_code: 0 /* new error code - not using it yet */ \ } #endif /* IN2000_H */