/**************************************************************************** * Perceptive Solutions, Inc. PCI-2000 device driver for Linux. * * pci2000.c - Linux Host Driver for PCI-2000 IntelliCache SCSI Adapters * * Copyright (c) 1997-1999 Perceptive Solutions, Inc. * All Rights Reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that redistributions of source * code retain the above copyright notice and this comment without * modification. * * Technical updates and product information at: * http://www.psidisk.com * * Please send questions, comments, bug reports to: * tech@psidisk.com Technical Support * * * Revisions 1.10 Jan-21-1999 * - Fixed sign on message to reflect proper controller name. * - Added support for RAID status monitoring and control. * * Revisions 1.11 Mar-22-1999 * - Fixed control timeout to not lock up the entire system if * controller goes offline completely. * * Revisions 1.12 Mar-26-1999 * - Fixed spinlock and PCI configuration. * * Revisions 1.20 Mar-27-2000 * - Added support for dynamic DMA * ****************************************************************************/ #define PCI2000_VERSION "1.20" #include #include #include #include #include #include #include #include #include #include #include #include #include #include "scsi.h" #include "hosts.h" #include #include #include "pci2000.h" #include "psi_roy.h" //#define DEBUG 1 #ifdef DEBUG #define DEB(x) x #define STOP_HERE {int st;for(st=0;st<100;st++){st=1;}} #else #define DEB(x) #define STOP_HERE #endif typedef struct { unsigned int address; unsigned int length; } SCATGATH, *PSCATGATH; typedef struct { Scsi_Cmnd *SCpnt; PSCATGATH scatGath; dma_addr_t scatGathDma; UCHAR *cdb; dma_addr_t cdbDma; UCHAR tag; } DEV2000, *PDEV2000; typedef struct { ULONG basePort; ULONG mb0; ULONG mb1; ULONG mb2; ULONG mb3; ULONG mb4; ULONG cmd; ULONG tag; ULONG irqOwned; struct pci_dev *pdev; DEV2000 dev[MAX_BUS][MAX_UNITS]; } ADAPTER2000, *PADAPTER2000; #define HOSTDATA(host) ((PADAPTER2000)&host->hostdata) #define consistentLen (MAX_BUS * MAX_UNITS * (16 * sizeof (SCATGATH) + MAX_COMMAND_SIZE)) static struct Scsi_Host *PsiHost[MAXADAPTER] = {NULL,}; // One for each adapter static int NumAdapters = 0; /**************************************************************** * Name: WaitReady :LOCAL * * Description: Wait for controller ready. * * Parameters: padapter - Pointer adapter data structure. * * Returns: TRUE on not ready. * ****************************************************************/ static int WaitReady (PADAPTER2000 padapter) { ULONG z; for ( z = 0; z < (TIMEOUT_COMMAND * 4); z++ ) { if ( !inb_p (padapter->cmd) ) return FALSE; udelay (250); }; return TRUE; } /**************************************************************** * Name: WaitReadyLong :LOCAL * * Description: Wait for controller ready. * * Parameters: padapter - Pointer adapter data structure. * * Returns: TRUE on not ready. * ****************************************************************/ static int WaitReadyLong (PADAPTER2000 padapter) { ULONG z; for ( z = 0; z < (5000 * 4); z++ ) { if ( !inb_p (padapter->cmd) ) return FALSE; udelay (250); }; return TRUE; } /**************************************************************** * Name: OpDone :LOCAL * * Description: Clean up operation and issue done to caller. * * Parameters: SCpnt - Pointer to SCSI command structure. * status - Caller status. * * Returns: Nothing. * ****************************************************************/ static void OpDone (Scsi_Cmnd *SCpnt, ULONG status) { SCpnt->result = status; SCpnt->scsi_done (SCpnt); } /**************************************************************** * Name: Command :LOCAL * * Description: Issue queued command to the PCI-2000. * * Parameters: padapter - Pointer to adapter information structure. * cmd - PCI-2000 command byte. * * Returns: Non-zero command tag if operation is accepted. * ****************************************************************/ static UCHAR Command (PADAPTER2000 padapter, UCHAR cmd) { outb_p (cmd, padapter->cmd); if ( WaitReady (padapter) ) return 0; if ( inw_p (padapter->mb0) ) return 0; return inb_p (padapter->mb1); } /**************************************************************** * Name: BuildSgList :LOCAL * * Description: Build the scatter gather list for controller. * * Parameters: SCpnt - Pointer to SCSI command structure. * padapter - Pointer to adapter information structure. * pdev - Pointer to adapter device structure. * * Returns: Non-zero in not scatter gather. * ****************************************************************/ static int BuildSgList (Scsi_Cmnd *SCpnt, PADAPTER2000 padapter, PDEV2000 pdev) { int z; int zc; struct scatterlist *sg; if ( SCpnt->use_sg ) { sg = (struct scatterlist *)SCpnt->request_buffer; zc = pci_map_sg (padapter->pdev, sg, SCpnt->use_sg, scsi_to_pci_dma_dir (SCpnt->sc_data_direction)); for ( z = 0; z < zc; z++ ) { pdev->scatGath[z].address = cpu_to_le32 (sg_dma_address (sg)); pdev->scatGath[z].length = cpu_to_le32 (sg_dma_len (sg++)); } outl (pdev->scatGathDma, padapter->mb2); outl ((zc << 24) | SCpnt->request_bufflen, padapter->mb3); return FALSE; } if ( !SCpnt->request_bufflen) { outl (0, padapter->mb2); outl (0, padapter->mb3); return TRUE; } SCpnt->SCp.have_data_in = pci_map_single (padapter->pdev, SCpnt->request_buffer, SCpnt->request_bufflen, scsi_to_pci_dma_dir (SCpnt->sc_data_direction)); outl (SCpnt->SCp.have_data_in, padapter->mb2); outl (SCpnt->request_bufflen, padapter->mb3); return TRUE; } /********************************************************************* * Name: PsiRaidCmd * * Description: Execute a simple command. * * Parameters: padapter - Pointer to adapter control structure. * cmd - Roy command byte. * * Returns: Return error status. * ********************************************************************/ static int PsiRaidCmd (PADAPTER2000 padapter, char cmd) { if ( WaitReady (padapter) ) // test for command register ready return DID_TIME_OUT; outb_p (cmd, padapter->cmd); // issue command if ( WaitReadyLong (padapter) ) // wait for adapter ready return DID_TIME_OUT; return DID_OK; } /**************************************************************** * Name: Irq_Handler :LOCAL * * Description: Interrupt handler. * * Parameters: irq - Hardware IRQ number. * dev_id - * regs - * * Returns: TRUE if drive is not ready in time. * ****************************************************************/ static void Irq_Handler (int irq, void *dev_id, struct pt_regs *regs) { struct Scsi_Host *shost = NULL; // Pointer to host data block PADAPTER2000 padapter; // Pointer to adapter control structure PDEV2000 pdev; Scsi_Cmnd *SCpnt; UCHAR tag = 0; UCHAR tag0; ULONG error; int pun; int bus; int z; unsigned long flags; /* * Disable interrupts, if they aren't already disabled and acquire * the I/O spinlock. */ spin_lock_irqsave (&io_request_lock, flags); DEB(printk ("\npci2000 recieved interrupt ")); for ( z = 0; z < NumAdapters; z++ ) // scan for interrupt to process { if ( PsiHost[z]->irq == (UCHAR)(irq & 0xFF) ) { tag = inb_p (HOSTDATA(PsiHost[z])->tag); if ( tag ) { shost = PsiHost[z]; break; } } } if ( !shost ) { DEB (printk ("\npci2000: not my interrupt")); goto irq_return; } padapter = HOSTDATA(shost); tag0 = tag & 0x7F; // mask off the error bit for ( bus = 0; bus < MAX_BUS; bus++ ) // scan the busses { for ( pun = 0; pun < MAX_UNITS; pun++ ) // scan the targets { pdev = &padapter->dev[bus][pun]; if ( !pdev->tag ) continue; if ( pdev->tag == tag0 ) // is this it? { pdev->tag = 0; SCpnt = pdev->SCpnt; goto unmapProceed; } } } outb_p (0xFF, padapter->tag); // clear the op interrupt outb_p (CMD_DONE, padapter->cmd); // complete the op goto irq_return;; // done, but, with what? unmapProceed:; if ( !bus ) { switch ( SCpnt->cmnd[0] ) { case SCSIOP_TEST_UNIT_READY: pci_unmap_single (padapter->pdev, SCpnt->SCp.have_data_in, sizeof (SCpnt->sense_buffer), PCI_DMA_FROMDEVICE); goto irqProceed; case SCSIOP_READ_CAPACITY: pci_unmap_single (padapter->pdev, SCpnt->SCp.have_data_in, 8, PCI_DMA_FROMDEVICE); goto irqProceed; case SCSIOP_VERIFY: case SCSIOP_START_STOP_UNIT: case SCSIOP_MEDIUM_REMOVAL: goto irqProceed; } } if ( SCpnt->SCp.have_data_in ) pci_unmap_single (padapter->pdev, SCpnt->SCp.have_data_in, SCpnt->request_bufflen, scsi_to_pci_dma_dir(SCpnt->sc_data_direction)); else { if ( SCpnt->use_sg ) pci_unmap_sg (padapter->pdev, (struct scatterlist *)SCpnt->request_buffer, SCpnt->use_sg, scsi_to_pci_dma_dir(SCpnt->sc_data_direction)); } irqProceed:; if ( tag & ERR08_TAGGED ) // is there an error here? { if ( WaitReady (padapter) ) { OpDone (SCpnt, DID_TIME_OUT << 16); goto irq_return;; } outb_p (tag0, padapter->mb0); // get real error code outb_p (CMD_ERROR, padapter->cmd); if ( WaitReady (padapter) ) // wait for controller to suck up the op { OpDone (SCpnt, DID_TIME_OUT << 16); goto irq_return;; } error = inl (padapter->mb0); // get error data outb_p (0xFF, padapter->tag); // clear the op interrupt outb_p (CMD_DONE, padapter->cmd); // complete the op DEB (printk ("status: %lX ", error)); if ( error == 0x00020002 ) // is this error a check condition? { if ( bus ) // are we doint SCSI commands? { OpDone (SCpnt, (DID_OK << 16) | 2); goto irq_return;; } if ( *SCpnt->cmnd == SCSIOP_TEST_UNIT_READY ) OpDone (SCpnt, (DRIVER_SENSE << 24) | (DID_OK << 16) | 2); // test caller we have sense data too else OpDone (SCpnt, DID_ERROR << 16); goto irq_return;; } OpDone (SCpnt, DID_ERROR << 16); goto irq_return;; } outb_p (0xFF, padapter->tag); // clear the op interrupt outb_p (CMD_DONE, padapter->cmd); // complete the op OpDone (SCpnt, DID_OK << 16); irq_return:; /* * Release the I/O spinlock and restore the original flags * which will enable interrupts if and only if they were * enabled on entry. */ spin_unlock_irqrestore (&io_request_lock, flags); } /**************************************************************** * Name: Pci2000_QueueCommand * * Description: Process a queued command from the SCSI manager. * * Parameters: SCpnt - Pointer to SCSI command structure. * done - Pointer to done function to call. * * Returns: Status code. * ****************************************************************/ int Pci2000_QueueCommand (Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *)) { UCHAR *cdb = (UCHAR *)SCpnt->cmnd; // Pointer to SCSI CDB PADAPTER2000 padapter = HOSTDATA(SCpnt->host); // Pointer to adapter control structure int rc = -1; // command return code UCHAR bus = SCpnt->channel; UCHAR pun = SCpnt->target; UCHAR lun = SCpnt->lun; UCHAR cmd; PDEV2000 pdev = &padapter->dev[bus][pun]; if ( !done ) { printk("pci2000_queuecommand: %02X: done can't be NULL\n", *cdb); return 0; } SCpnt->scsi_done = done; SCpnt->SCp.have_data_in = 0; pdev->SCpnt = SCpnt; // Save this command data if ( WaitReady (padapter) ) { rc = DID_ERROR; goto finished; } outw_p (pun | (lun << 8), padapter->mb0); if ( bus ) { DEB (if(*cdb) printk ("\nCDB: %X- %X %X %X %X %X %X %X %X %X %X ", SCpnt->cmd_len, cdb[0], cdb[1], cdb[2], cdb[3], cdb[4], cdb[5], cdb[6], cdb[7], cdb[8], cdb[9])); DEB (if(*cdb) printk ("\ntimeout_per_command: %d, timeout_total: %d, timeout: %d, internal_timout: %d", SCpnt->timeout_per_command, SCpnt->timeout_total, SCpnt->timeout, SCpnt->internal_timeout)); outl (SCpnt->timeout_per_command, padapter->mb1); outb_p (CMD_SCSI_TIMEOUT, padapter->cmd); if ( WaitReady (padapter) ) { rc = DID_ERROR; goto finished; } outw_p (pun | (lun << 8), padapter->mb0); outw_p (SCpnt->cmd_len << 8, padapter->mb0 + 2); memcpy (pdev->cdb, cdb, MAX_COMMAND_SIZE); outl (pdev->cdbDma, padapter->mb1); if ( BuildSgList (SCpnt, padapter, pdev) ) cmd = CMD_SCSI_THRU; else cmd = CMD_SCSI_THRU_SG; if ( (pdev->tag = Command (padapter, cmd)) == 0 ) rc = DID_TIME_OUT; goto finished; } else { if ( lun ) { rc = DID_BAD_TARGET; goto finished; } } switch ( *cdb ) { case SCSIOP_INQUIRY: // inquiry CDB if ( cdb[2] == SC_MY_RAID ) { switch ( cdb[3] ) { case MY_SCSI_REBUILD: OpDone (SCpnt, PsiRaidCmd (padapter, CMD_RAID_REBUILD) << 16); return 0; case MY_SCSI_ALARMMUTE: OpDone (SCpnt, PsiRaidCmd (padapter, CMD_RAID_MUTE) << 16); return 0; case MY_SCSI_DEMOFAIL: OpDone (SCpnt, PsiRaidCmd (padapter, CMD_RAID_FAIL) << 16); return 0; default: if ( SCpnt->use_sg ) { rc = DID_ERROR; goto finished; } else { SCpnt->SCp.have_data_in = pci_map_single (padapter->pdev, SCpnt->request_buffer, SCpnt->request_bufflen, scsi_to_pci_dma_dir(SCpnt->sc_data_direction)); outl (SCpnt->SCp.have_data_in, padapter->mb2); } outl (cdb[5], padapter->mb0); outl (cdb[3], padapter->mb3); cmd = CMD_DASD_RAID_RQ; break; } break; } if ( SCpnt->use_sg ) { SCpnt->SCp.have_data_in = pci_map_single (padapter->pdev, ((struct scatterlist *)SCpnt->request_buffer)->address, SCpnt->request_bufflen, scsi_to_pci_dma_dir (SCpnt->sc_data_direction)); } else { SCpnt->SCp.have_data_in = pci_map_single (padapter->pdev, SCpnt->request_buffer, SCpnt->request_bufflen, scsi_to_pci_dma_dir (SCpnt->sc_data_direction)); } outl (SCpnt->SCp.have_data_in, padapter->mb2); outl (SCpnt->request_bufflen, padapter->mb3); cmd = CMD_DASD_SCSI_INQ; break; case SCSIOP_TEST_UNIT_READY: // test unit ready CDB SCpnt->SCp.have_data_in = pci_map_single (padapter->pdev, SCpnt->sense_buffer, sizeof (SCpnt->sense_buffer), PCI_DMA_FROMDEVICE); outl (SCpnt->SCp.have_data_in, padapter->mb2); outl (sizeof (SCpnt->sense_buffer), padapter->mb3); cmd = CMD_TEST_READY; break; case SCSIOP_READ_CAPACITY: // read capacity CDB if ( SCpnt->use_sg ) { SCpnt->SCp.have_data_in = pci_map_single (padapter->pdev, ((struct scatterlist *)(SCpnt->request_buffer))->address, 8, PCI_DMA_FROMDEVICE); } else SCpnt->SCp.have_data_in = pci_map_single (padapter->pdev, SCpnt->request_buffer, 8, PCI_DMA_FROMDEVICE); outl (SCpnt->SCp.have_data_in, padapter->mb2); outl (8, padapter->mb3); cmd = CMD_DASD_CAP; break; case SCSIOP_VERIFY: // verify CDB outw_p ((USHORT)cdb[8] | ((USHORT)cdb[7] << 8), padapter->mb0 + 2); outl (XSCSI2LONG (&cdb[2]), padapter->mb1); cmd = CMD_READ_SG; break; case SCSIOP_READ: // read10 CDB outw_p ((USHORT)cdb[8] | ((USHORT)cdb[7] << 8), padapter->mb0 + 2); outl (XSCSI2LONG (&cdb[2]), padapter->mb1); if ( BuildSgList (SCpnt, padapter, pdev) ) cmd = CMD_READ; else cmd = CMD_READ_SG; break; case SCSIOP_READ6: // read6 CDB outw_p (cdb[4], padapter->mb0 + 2); outl ((SCSI2LONG (&cdb[1])) & 0x001FFFFF, padapter->mb1); if ( BuildSgList (SCpnt, padapter, pdev) ) cmd = CMD_READ; else cmd = CMD_READ_SG; break; case SCSIOP_WRITE: // write10 CDB outw_p ((USHORT)cdb[8] | ((USHORT)cdb[7] << 8), padapter->mb0 + 2); outl (XSCSI2LONG (&cdb[2]), padapter->mb1); if ( BuildSgList (SCpnt, padapter, pdev) ) cmd = CMD_WRITE; else cmd = CMD_WRITE_SG; break; case SCSIOP_WRITE6: // write6 CDB outw_p (cdb[4], padapter->mb0 + 2); outl ((SCSI2LONG (&cdb[1])) & 0x001FFFFF, padapter->mb1); if ( BuildSgList (SCpnt, padapter, pdev) ) cmd = CMD_WRITE; else cmd = CMD_WRITE_SG; break; case SCSIOP_START_STOP_UNIT: cmd = CMD_EJECT_MEDIA; break; case SCSIOP_MEDIUM_REMOVAL: switch ( cdb[4] ) { case 0: cmd = CMD_UNLOCK_DOOR; break; case 1: cmd = CMD_LOCK_DOOR; break; default: cmd = 0; break; } if ( cmd ) break; default: DEB (printk ("pci2000_queuecommand: Unsupported command %02X\n", *cdb)); OpDone (SCpnt, DID_ERROR << 16); return 0; } if ( (pdev->tag = Command (padapter, cmd)) == 0 ) rc = DID_TIME_OUT; finished:; if ( rc != -1 ) OpDone (SCpnt, rc << 16); return 0; } /**************************************************************** * Name: internal_done :LOCAL * * Description: Done handler for non-queued commands * * Parameters: SCpnt - Pointer to SCSI command structure. * * Returns: Nothing. * ****************************************************************/ static void internal_done (Scsi_Cmnd * SCpnt) { SCpnt->SCp.Status++; } /**************************************************************** * Name: Pci2000_Command * * Description: Process a command from the SCSI manager. * * Parameters: SCpnt - Pointer to SCSI command structure. * * Returns: Status code. * ****************************************************************/ int Pci2000_Command (Scsi_Cmnd *SCpnt) { DEB(printk("pci2000_command: ..calling pci2000_queuecommand\n")); Pci2000_QueueCommand (SCpnt, internal_done); SCpnt->SCp.Status = 0; while (!SCpnt->SCp.Status) barrier (); return SCpnt->result; } /**************************************************************** * Name: Pci2000_Detect * * Description: Detect and initialize our boards. * * Parameters: tpnt - Pointer to SCSI host template structure. * * Returns: Number of adapters installed. * ****************************************************************/ int Pci2000_Detect (Scsi_Host_Template *tpnt) { int found = 0; int installed = 0; struct Scsi_Host *pshost; PADAPTER2000 padapter; int z, zz; int setirq; struct pci_dev *pdev = NULL; UCHAR *consistent; dma_addr_t consistentDma; if ( !pci_present () ) { printk ("pci2000: PCI BIOS not present\n"); return 0; } while ( (pdev = pci_find_device (VENDOR_PSI, DEVICE_ROY_1, pdev)) != NULL ) { if (pci_enable_device(pdev)) continue; pshost = scsi_register (tpnt, sizeof(ADAPTER2000)); if(pshost == NULL) continue; padapter = HOSTDATA(pshost); padapter->basePort = pci_resource_start (pdev, 1); DEB (printk ("\nBase Regs = %#04X", padapter->basePort)); // get the base I/O port address padapter->mb0 = padapter->basePort + RTR_MAILBOX; // get the 32 bit mail boxes padapter->mb1 = padapter->basePort + RTR_MAILBOX + 4; padapter->mb2 = padapter->basePort + RTR_MAILBOX + 8; padapter->mb3 = padapter->basePort + RTR_MAILBOX + 12; padapter->mb4 = padapter->basePort + RTR_MAILBOX + 16; padapter->cmd = padapter->basePort + RTR_LOCAL_DOORBELL; // command register padapter->tag = padapter->basePort + RTR_PCI_DOORBELL; // tag/response register padapter->pdev = pdev; if ( WaitReady (padapter) ) goto unregister; outb_p (0x84, padapter->mb0); outb_p (CMD_SPECIFY, padapter->cmd); if ( WaitReady (padapter) ) goto unregister; consistent = pci_alloc_consistent (pdev, consistentLen, &consistentDma); if ( !consistent ) { printk ("Unable to allocate DMA memory for PCI-2000 controller.\n"); goto unregister; } pshost->irq = pdev->irq; setirq = 1; padapter->irqOwned = 0; for ( z = 0; z < installed; z++ ) // scan for shared interrupts { if ( PsiHost[z]->irq == pshost->irq ) // if shared then, don't posses setirq = 0; } if ( setirq ) // if not shared, posses { if ( request_irq (pshost->irq, Irq_Handler, SA_SHIRQ, "pci2000", padapter) < 0 ) { if ( request_irq (pshost->irq, Irq_Handler, SA_INTERRUPT | SA_SHIRQ, "pci2000", padapter) < 0 ) { printk ("Unable to allocate IRQ for PCI-2000 controller.\n"); pci_free_consistent (pdev, consistentLen, consistent, consistentDma); goto unregister; } } padapter->irqOwned = pshost->irq; // set IRQ as owned } PsiHost[installed] = pshost; // save SCSI_HOST pointer pshost->io_port = padapter->basePort; pshost->n_io_port = 0xFF; pshost->unique_id = padapter->basePort; pshost->max_id = 16; pshost->max_channel = 1; for ( zz = 0; zz < MAX_BUS; zz++ ) for ( z = 0; z < MAX_UNITS; z++ ) { padapter->dev[zz][z].tag = 0; padapter->dev[zz][z].scatGath = (PSCATGATH)consistent; padapter->dev[zz][z].scatGathDma = consistentDma; consistent += 16 * sizeof (SCATGATH); consistentDma += 16 * sizeof (SCATGATH); padapter->dev[zz][z].cdb = (UCHAR *)consistent; padapter->dev[zz][z].cdbDma = consistentDma; consistent += MAX_COMMAND_SIZE; consistentDma += MAX_COMMAND_SIZE; } printk("\nPSI-2000 Intelligent Storage SCSI CONTROLLER: at I/O = %lX IRQ = %d\n", padapter->basePort, pshost->irq); printk("Version %s, Compiled %s %s\n\n", PCI2000_VERSION, __DATE__, __TIME__); found++; if ( ++installed < MAXADAPTER ) continue; break; unregister:; scsi_unregister (pshost); found++; } NumAdapters = installed; return installed; } /**************************************************************** * Name: Pci2000_Abort * * Description: Process the Abort command from the SCSI manager. * * Parameters: SCpnt - Pointer to SCSI command structure. * * Returns: Allways snooze. * ****************************************************************/ int Pci2000_Abort (Scsi_Cmnd *SCpnt) { DEB (printk ("pci2000_abort\n")); return SCSI_ABORT_SNOOZE; } /**************************************************************** * Name: Pci2000_Reset * * Description: Process the Reset command from the SCSI manager. * * Parameters: SCpnt - Pointer to SCSI command structure. * flags - Flags about the reset command * * Returns: No active command at this time, so this means * that each time we got some kind of response the * last time through. Tell the mid-level code to * request sense information in order to decide what * to do next. * ****************************************************************/ int Pci2000_Reset (Scsi_Cmnd *SCpnt, unsigned int reset_flags) { return SCSI_RESET_PUNT; } /**************************************************************** * Name: Pci2000_Release * * Description: Release resources allocated for a single each adapter. * * Parameters: pshost - Pointer to SCSI command structure. * * Returns: zero. * ****************************************************************/ int Pci2000_Release (struct Scsi_Host *pshost) { PADAPTER2000 padapter = HOSTDATA (pshost); if ( padapter->irqOwned ) free_irq (pshost->irq, padapter); pci_free_consistent (padapter->pdev, consistentLen, padapter->dev[0][0].scatGath, padapter->dev[0][0].scatGathDma); release_region (pshost->io_port, pshost->n_io_port); scsi_unregister(pshost); return 0; } #include "sd.h" /**************************************************************** * Name: Pci2000_BiosParam * * Description: Process the biosparam request from the SCSI manager to * return C/H/S data. * * Parameters: disk - Pointer to SCSI disk structure. * dev - Major/minor number from kernel. * geom - Pointer to integer array to place geometry data. * * Returns: zero. * ****************************************************************/ int Pci2000_BiosParam (Scsi_Disk *disk, kdev_t dev, int geom[]) { PADAPTER2000 padapter; padapter = HOSTDATA(disk->device->host); if ( WaitReady (padapter) ) return 0; outb_p (disk->device->id, padapter->mb0); outb_p (CMD_GET_PARMS, padapter->cmd); if ( WaitReady (padapter) ) return 0; geom[0] = inb_p (padapter->mb2 + 3); geom[1] = inb_p (padapter->mb2 + 2); geom[2] = inw_p (padapter->mb2); return 0; } /* Eventually this will go into an include file, but this will be later */ static Scsi_Host_Template driver_template = PCI2000; #include "scsi_module.c"