#include #include #include #include #include #include #include #include #include #include "scsi.h" #include "hosts.h" #include #include #include "sr.h" #if 0 #define DEBUG #endif /* The sr_is_xa() seems to trigger firmware bugs with some drives :-( * It is off by default and can be turned on with this module parameter */ static int xa_test = 0; extern void get_sectorsize(int); #define IOCTL_RETRIES 3 /* The CDROM is fairly slow, so we need a little extra time */ /* In fact, it is very slow if it has to spin up first */ #define IOCTL_TIMEOUT 30*HZ /* We do our own retries because we want to know what the specific error code is. Normally the UNIT_ATTENTION code will automatically clear after one error */ int sr_do_ioctl(int target, unsigned char *sr_cmd, void *buffer, unsigned buflength, int quiet, int readwrite) { Scsi_Request *SRpnt; Scsi_Device *SDev; struct request *req; int result, err = 0, retries = 0; char *bounce_buffer; SDev = scsi_CDs[target].device; SRpnt = scsi_allocate_request(scsi_CDs[target].device); SRpnt->sr_data_direction = readwrite; /* use ISA DMA buffer if necessary */ SRpnt->sr_request.buffer = buffer; if (buffer && SRpnt->sr_host->unchecked_isa_dma && (virt_to_phys(buffer) + buflength - 1 > ISA_DMA_THRESHOLD)) { bounce_buffer = (char *) scsi_malloc((buflength + 511) & ~511); if (bounce_buffer == NULL) { printk("SCSI DMA pool exhausted."); return -ENOMEM; } memcpy(bounce_buffer, (char *) buffer, buflength); buffer = bounce_buffer; } retry: if (!scsi_block_when_processing_errors(SDev)) return -ENODEV; scsi_wait_req(SRpnt, (void *) sr_cmd, (void *) buffer, buflength, IOCTL_TIMEOUT, IOCTL_RETRIES); req = &SRpnt->sr_request; if (SRpnt->sr_buffer && req->buffer && SRpnt->sr_buffer != req->buffer) { memcpy(req->buffer, SRpnt->sr_buffer, SRpnt->sr_bufflen); scsi_free(SRpnt->sr_buffer, (SRpnt->sr_bufflen + 511) & ~511); SRpnt->sr_buffer = req->buffer; } result = SRpnt->sr_result; /* Minimal error checking. Ignore cases we know about, and report the rest. */ if (driver_byte(result) != 0) { switch (SRpnt->sr_sense_buffer[2] & 0xf) { case UNIT_ATTENTION: scsi_CDs[target].device->changed = 1; if (!quiet) printk(KERN_INFO "sr%d: disc change detected.\n", target); if (retries++ < 10) goto retry; err = -ENOMEDIUM; break; case NOT_READY: /* This happens if there is no disc in drive */ if (SRpnt->sr_sense_buffer[12] == 0x04 && SRpnt->sr_sense_buffer[13] == 0x01) { /* sense: Logical unit is in process of becoming ready */ if (!quiet) printk(KERN_INFO "sr%d: CDROM not ready yet.\n", target); if (retries++ < 10) { /* sleep 2 sec and try again */ scsi_sleep(2 * HZ); goto retry; } else { /* 20 secs are enough? */ err = -ENOMEDIUM; break; } } if (!quiet) printk(KERN_INFO "sr%d: CDROM not ready. Make sure there is a disc in the drive.\n", target); #ifdef DEBUG print_req_sense("sr", SRpnt); #endif err = -ENOMEDIUM; break; case ILLEGAL_REQUEST: if (!quiet) printk(KERN_ERR "sr%d: CDROM (ioctl) reports ILLEGAL " "REQUEST.\n", target); if (SRpnt->sr_sense_buffer[12] == 0x20 && SRpnt->sr_sense_buffer[13] == 0x00) { /* sense: Invalid command operation code */ err = -EDRIVE_CANT_DO_THIS; } else { err = -EINVAL; } #ifdef DEBUG print_command(sr_cmd); print_req_sense("sr", SRpnt); #endif break; default: printk(KERN_ERR "sr%d: CDROM (ioctl) error, command: ", target); print_command(sr_cmd); print_req_sense("sr", SRpnt); err = -EIO; } } result = SRpnt->sr_result; /* Wake up a process waiting for device */ scsi_release_request(SRpnt); SRpnt = NULL; return err; } /* ---------------------------------------------------------------------- */ /* interface to cdrom.c */ static int test_unit_ready(int minor) { u_char sr_cmd[10]; sr_cmd[0] = GPCMD_TEST_UNIT_READY; sr_cmd[1] = ((scsi_CDs[minor].device->lun) << 5); sr_cmd[2] = sr_cmd[3] = sr_cmd[4] = sr_cmd[5] = 0; return sr_do_ioctl(minor, sr_cmd, NULL, 0, 1, SCSI_DATA_NONE); } int sr_tray_move(struct cdrom_device_info *cdi, int pos) { u_char sr_cmd[10]; sr_cmd[0] = GPCMD_START_STOP_UNIT; sr_cmd[1] = ((scsi_CDs[MINOR(cdi->dev)].device->lun) << 5); sr_cmd[2] = sr_cmd[3] = sr_cmd[5] = 0; sr_cmd[4] = (pos == 0) ? 0x03 /* close */ : 0x02 /* eject */ ; return sr_do_ioctl(MINOR(cdi->dev), sr_cmd, NULL, 0, 0, SCSI_DATA_NONE); } int sr_lock_door(struct cdrom_device_info *cdi, int lock) { return scsi_ioctl(scsi_CDs[MINOR(cdi->dev)].device, lock ? SCSI_IOCTL_DOORLOCK : SCSI_IOCTL_DOORUNLOCK, 0); } int sr_drive_status(struct cdrom_device_info *cdi, int slot) { if (CDSL_CURRENT != slot) { /* we have no changer support */ return -EINVAL; } if (0 == test_unit_ready(MINOR(cdi->dev))) return CDS_DISC_OK; return CDS_TRAY_OPEN; } int sr_disk_status(struct cdrom_device_info *cdi) { struct cdrom_tochdr toc_h; struct cdrom_tocentry toc_e; int i, rc, have_datatracks = 0; /* look for data tracks */ if (0 != (rc = sr_audio_ioctl(cdi, CDROMREADTOCHDR, &toc_h))) return (rc == -ENOMEDIUM) ? CDS_NO_DISC : CDS_NO_INFO; for (i = toc_h.cdth_trk0; i <= toc_h.cdth_trk1; i++) { toc_e.cdte_track = i; toc_e.cdte_format = CDROM_LBA; if (sr_audio_ioctl(cdi, CDROMREADTOCENTRY, &toc_e)) return CDS_NO_INFO; if (toc_e.cdte_ctrl & CDROM_DATA_TRACK) { have_datatracks = 1; break; } } if (!have_datatracks) return CDS_AUDIO; if (scsi_CDs[MINOR(cdi->dev)].xa_flag) return CDS_XA_2_1; else return CDS_DATA_1; } int sr_get_last_session(struct cdrom_device_info *cdi, struct cdrom_multisession *ms_info) { ms_info->addr.lba = scsi_CDs[MINOR(cdi->dev)].ms_offset; ms_info->xa_flag = scsi_CDs[MINOR(cdi->dev)].xa_flag || (scsi_CDs[MINOR(cdi->dev)].ms_offset > 0); return 0; } int sr_get_mcn(struct cdrom_device_info *cdi, struct cdrom_mcn *mcn) { u_char sr_cmd[10]; char buffer[32]; int result; sr_cmd[0] = GPCMD_READ_SUBCHANNEL; sr_cmd[1] = ((scsi_CDs[MINOR(cdi->dev)].device->lun) << 5); sr_cmd[2] = 0x40; /* I do want the subchannel info */ sr_cmd[3] = 0x02; /* Give me medium catalog number info */ sr_cmd[4] = sr_cmd[5] = 0; sr_cmd[6] = 0; sr_cmd[7] = 0; sr_cmd[8] = 24; sr_cmd[9] = 0; result = sr_do_ioctl(MINOR(cdi->dev), sr_cmd, buffer, 24, 0, SCSI_DATA_READ); memcpy(mcn->medium_catalog_number, buffer + 9, 13); mcn->medium_catalog_number[13] = 0; return result; } int sr_reset(struct cdrom_device_info *cdi) { invalidate_buffers(cdi->dev); return 0; } int sr_select_speed(struct cdrom_device_info *cdi, int speed) { u_char sr_cmd[MAX_COMMAND_SIZE]; if (speed == 0) speed = 0xffff; /* set to max */ else speed *= 177; /* Nx to kbyte/s */ memset(sr_cmd, 0, MAX_COMMAND_SIZE); sr_cmd[0] = GPCMD_SET_SPEED; /* SET CD SPEED */ sr_cmd[1] = (scsi_CDs[MINOR(cdi->dev)].device->lun) << 5; sr_cmd[2] = (speed >> 8) & 0xff; /* MSB for speed (in kbytes/sec) */ sr_cmd[3] = speed & 0xff; /* LSB */ if (sr_do_ioctl(MINOR(cdi->dev), sr_cmd, NULL, 0, 0, SCSI_DATA_NONE)) return -EIO; return 0; } /* ----------------------------------------------------------------------- */ /* this is called by the generic cdrom driver. arg is a _kernel_ pointer, */ /* because the generic cdrom driver does the user access stuff for us. */ /* only cdromreadtochdr and cdromreadtocentry are left - for use with the */ /* sr_disk_status interface for the generic cdrom driver. */ int sr_audio_ioctl(struct cdrom_device_info *cdi, unsigned int cmd, void *arg) { u_char sr_cmd[10]; int result, target = MINOR(cdi->dev); unsigned char buffer[32]; memset(sr_cmd, 0, sizeof(sr_cmd)); switch (cmd) { case CDROMREADTOCHDR: { struct cdrom_tochdr *tochdr = (struct cdrom_tochdr *) arg; sr_cmd[0] = GPCMD_READ_TOC_PMA_ATIP; sr_cmd[1] = ((scsi_CDs[target].device->lun) << 5); sr_cmd[2] = sr_cmd[3] = sr_cmd[4] = sr_cmd[5] = 0; sr_cmd[8] = 12; /* LSB of length */ result = sr_do_ioctl(target, sr_cmd, buffer, 12, 1, SCSI_DATA_READ); tochdr->cdth_trk0 = buffer[2]; tochdr->cdth_trk1 = buffer[3]; break; } case CDROMREADTOCENTRY: { struct cdrom_tocentry *tocentry = (struct cdrom_tocentry *) arg; sr_cmd[0] = GPCMD_READ_TOC_PMA_ATIP; sr_cmd[1] = ((scsi_CDs[target].device->lun) << 5) | (tocentry->cdte_format == CDROM_MSF ? 0x02 : 0); sr_cmd[2] = sr_cmd[3] = sr_cmd[4] = sr_cmd[5] = 0; sr_cmd[6] = tocentry->cdte_track; sr_cmd[8] = 12; /* LSB of length */ result = sr_do_ioctl(target, sr_cmd, buffer, 12, 0, SCSI_DATA_READ); tocentry->cdte_ctrl = buffer[5] & 0xf; tocentry->cdte_adr = buffer[5] >> 4; tocentry->cdte_datamode = (tocentry->cdte_ctrl & 0x04) ? 1 : 0; if (tocentry->cdte_format == CDROM_MSF) { tocentry->cdte_addr.msf.minute = buffer[9]; tocentry->cdte_addr.msf.second = buffer[10]; tocentry->cdte_addr.msf.frame = buffer[11]; } else tocentry->cdte_addr.lba = (((((buffer[8] << 8) + buffer[9]) << 8) + buffer[10]) << 8) + buffer[11]; break; } case CDROMPLAYTRKIND: { struct cdrom_ti* ti = (struct cdrom_ti*)arg; sr_cmd[0] = GPCMD_PLAYAUDIO_TI; sr_cmd[1] = scsi_CDs[target].device->lun << 5; sr_cmd[4] = ti->cdti_trk0; sr_cmd[5] = ti->cdti_ind0; sr_cmd[7] = ti->cdti_trk1; sr_cmd[8] = ti->cdti_ind1; result = sr_do_ioctl(target, sr_cmd, NULL, 255, 0, SCSI_DATA_NONE); break; } default: return -EINVAL; } #if 0 if (result) printk("DEBUG: sr_audio: result for ioctl %x: %x\n", cmd, result); #endif return result; } /* ----------------------------------------------------------------------- * a function to read all sorts of funny cdrom sectors using the READ_CD * scsi-3 mmc command * * lba: linear block address * format: 0 = data (anything) * 1 = audio * 2 = data (mode 1) * 3 = data (mode 2) * 4 = data (mode 2 form1) * 5 = data (mode 2 form2) * blksize: 2048 | 2336 | 2340 | 2352 */ int sr_read_cd(int minor, unsigned char *dest, int lba, int format, int blksize) { unsigned char cmd[MAX_COMMAND_SIZE]; #ifdef DEBUG printk("sr%d: sr_read_cd lba=%d format=%d blksize=%d\n", minor, lba, format, blksize); #endif memset(cmd, 0, MAX_COMMAND_SIZE); cmd[0] = GPCMD_READ_CD; /* READ_CD */ cmd[1] = (scsi_CDs[minor].device->lun << 5) | ((format & 7) << 2); cmd[2] = (unsigned char) (lba >> 24) & 0xff; cmd[3] = (unsigned char) (lba >> 16) & 0xff; cmd[4] = (unsigned char) (lba >> 8) & 0xff; cmd[5] = (unsigned char) lba & 0xff; cmd[8] = 1; switch (blksize) { case 2336: cmd[9] = 0x58; break; case 2340: cmd[9] = 0x78; break; case 2352: cmd[9] = 0xf8; break; default: cmd[9] = 0x10; break; } return sr_do_ioctl(minor, cmd, dest, blksize, 0, SCSI_DATA_READ); } /* * read sectors with blocksizes other than 2048 */ int sr_read_sector(int minor, int lba, int blksize, unsigned char *dest) { unsigned char cmd[MAX_COMMAND_SIZE]; /* the scsi-command */ int rc; /* we try the READ CD command first... */ if (scsi_CDs[minor].readcd_known) { rc = sr_read_cd(minor, dest, lba, 0, blksize); if (-EDRIVE_CANT_DO_THIS != rc) return rc; scsi_CDs[minor].readcd_known = 0; printk("CDROM does'nt support READ CD (0xbe) command\n"); /* fall & retry the other way */ } /* ... if this fails, we switch the blocksize using MODE SELECT */ if (blksize != scsi_CDs[minor].device->sector_size) { if (0 != (rc = sr_set_blocklength(minor, blksize))) return rc; } #ifdef DEBUG printk("sr%d: sr_read_sector lba=%d blksize=%d\n", minor, lba, blksize); #endif memset(cmd, 0, MAX_COMMAND_SIZE); cmd[0] = GPCMD_READ_10; cmd[1] = (scsi_CDs[minor].device->lun << 5); cmd[2] = (unsigned char) (lba >> 24) & 0xff; cmd[3] = (unsigned char) (lba >> 16) & 0xff; cmd[4] = (unsigned char) (lba >> 8) & 0xff; cmd[5] = (unsigned char) lba & 0xff; cmd[8] = 1; rc = sr_do_ioctl(minor, cmd, dest, blksize, 0, SCSI_DATA_READ); return rc; } /* * read a sector in raw mode to check the sector format * ret: 1 == mode2 (XA), 0 == mode1, <0 == error */ int sr_is_xa(int minor) { unsigned char *raw_sector; int is_xa; if (!xa_test) return 0; raw_sector = (unsigned char *) scsi_malloc(2048 + 512); if (!raw_sector) return -ENOMEM; if (0 == sr_read_sector(minor, scsi_CDs[minor].ms_offset + 16, CD_FRAMESIZE_RAW1, raw_sector)) { is_xa = (raw_sector[3] == 0x02) ? 1 : 0; } else { /* read a raw sector failed for some reason. */ is_xa = -1; } scsi_free(raw_sector, 2048 + 512); #ifdef DEBUG printk("sr%d: sr_is_xa: %d\n", minor, is_xa); #endif return is_xa; } int sr_dev_ioctl(struct cdrom_device_info *cdi, unsigned int cmd, unsigned long arg) { int target; target = MINOR(cdi->dev); switch (cmd) { case BLKROSET: case BLKROGET: case BLKRASET: case BLKRAGET: case BLKFLSBUF: case BLKSSZGET: return blk_ioctl(cdi->dev, cmd, arg); default: return scsi_ioctl(scsi_CDs[target].device, cmd, (void *) arg); } } /* * Overrides for Emacs so that we follow Linus's tabbing style. * Emacs will notice this stuff at the end of the file and automatically * adjust the settings for this buffer only. This must remain at the end * of the file. * --------------------------------------------------------------------------- * Local variables: * c-indent-level: 4 * c-brace-imaginary-offset: 0 * c-brace-offset: -4 * c-argdecl-indent: 4 * c-label-offset: -4 * c-continued-statement-offset: 4 * c-continued-brace-offset: 0 * indent-tabs-mode: nil * tab-width: 8 * End: */