/* $Id: graphics.c,v 1.13 1998/08/25 09:18:57 ralf Exp $ * * gfx.c: support for SGI's /dev/graphics, /dev/opengl * * Author: Miguel de Icaza (miguel@nuclecu.unam.mx) Ralf Baechle (ralf@gnu.org) * * On IRIX, /dev/graphics is [10, 146] * /dev/opengl is [10, 147] * * From a mail with Mark J. Kilgard, /dev/opengl and /dev/graphics are * the same thing, the use of /dev/graphics seems deprecated though. * * The reason that the original SGI programmer had to use only one * device for all the graphic cards on the system will remain a * mistery for the rest of our lives. Why some ioctls take a board * number and some others not? Mistery. Why do they map the hardware * registers into the user address space with an ioctl instead of * mmap? Mistery too. Why they did not use the standard way of * making ioctl constants and instead sticked a random constant? * Mistery too. * * We implement those misterious things, and tried not to think about * the reasons behind them. */ #include #include #include #include #include #include #include #include #include "gconsole.h" #include "graphics.h" #include #include #include #include /* The boards */ extern struct graphics_ops *newport_probe (int, const char **); #ifdef PRODUCTION_DRIVER #define enable_gconsole() #define disable_gconsole() #endif static struct graphics_ops cards [MAXCARDS]; static int boards; #define GRAPHICS_CARD(inode) 0 int sgi_graphics_open (struct inode *inode, struct file *file) { return 0; } int sgi_graphics_ioctl (struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) { unsigned int board; unsigned int devnum = GRAPHICS_CARD (inode->i_rdev); int i; if ((cmd >= RRM_BASE) && (cmd <= RRM_CMD_LIMIT)) return rrm_command (cmd-RRM_BASE, (void *) arg); switch (cmd){ case GFX_GETNUM_BOARDS: return boards; case GFX_GETBOARD_INFO: { struct gfx_getboardinfo_args *bia = (void *) arg; void *dest_buf; int max_len; i = verify_area (VERIFY_READ, (void *) arg, sizeof (struct gfx_getboardinfo_args)); if (i) return i; __get_user_ret (board, &bia->board, -EFAULT); __get_user_ret (dest_buf, &bia->buf, -EFAULT); __get_user_ret (max_len, &bia->len, -EFAULT); if (board >= boards) return -EINVAL; if (max_len < sizeof (struct gfx_getboardinfo_args)) return -EINVAL; if (max_len > cards [board].g_board_info_len) max_len = cards [boards].g_board_info_len; i = verify_area (VERIFY_WRITE, dest_buf, max_len); if (i) return i; if (copy_to_user (dest_buf, cards [board].g_board_info, max_len)) return -EFAULT; return max_len; } case GFX_ATTACH_BOARD: { struct gfx_attach_board_args *att = (void *) arg; void *vaddr; int r; i = verify_area (VERIFY_READ, (void *)arg, sizeof (struct gfx_attach_board_args)); if (i) return i; __get_user_ret (board, &att->board, -EFAULT); __get_user_ret (vaddr, &att->vaddr, -EFAULT); /* Ok for now we are assuming /dev/graphicsN -> head N even * if the ioctl api suggests that this is not quite the case. * * Otherwise we fail, we use this assumption in the mmap code * below to find our board information. */ if (board != devnum){ printk ("Parameter board does not match the current board\n"); return -EINVAL; } if (board >= boards) return -EINVAL; /* If it is the first opening it, then make it the board owner */ if (!cards [board].g_owner) cards [board].g_owner = current; /* * Ok, we now call mmap on this file, which will end up calling * sgi_graphics_mmap */ disable_gconsole (); r = do_mmap (file, (unsigned long)vaddr, cards [board].g_regs_size, PROT_READ|PROT_WRITE, MAP_FIXED|MAP_PRIVATE, 0); if (r) return r; } /* Strange, the real mapping seems to be done at GFX_ATTACH_BOARD, * GFX_MAPALL is not even used by IRIX X server */ case GFX_MAPALL: return 0; case GFX_LABEL: return 0; /* Version check * for my IRIX 6.2 X server, this is what the kernel returns */ case 1: return 3; /* Xsgi does not use this one, I assume minor is the board being queried */ case GFX_IS_MANAGED: if (devnum > boards) return -EINVAL; return (cards [devnum].g_owner != 0); default: if (cards [devnum].g_ioctl) return (*cards [devnum].g_ioctl)(devnum, cmd, arg); } return -EINVAL; } int sgi_graphics_close (struct inode *inode, struct file *file) { int board = GRAPHICS_CARD (inode->i_rdev); /* Tell the rendering manager that one client is going away */ rrm_close (inode, file); /* Was this file handle from the board owner?, clear it */ if (current == cards [board].g_owner){ cards [board].g_owner = 0; (*cards [board].g_reset_console)(); enable_gconsole (); } return 0; } /* * This is the core of the direct rendering engine. */ unsigned long sgi_graphics_nopage (struct vm_area_struct *vma, unsigned long address, int write_access) { unsigned long page; int board = GRAPHICS_CARD (vma->vm_dentry->d_inode->i_rdev); #ifdef DEBUG_GRAPHICS printk ("Got a page fault for board %d address=%lx guser=%lx\n", board, address, cards [board].g_user); #endif /* 1. figure out if another process has this mapped, * and revoke the mapping in that case. */ if (cards [board].g_user && cards [board].g_user != current){ /* FIXME: save graphics context here, dump it to rendering node? */ remove_mapping (cards [board].g_user, vma->vm_start, vma->vm_end); } cards [board].g_user = current; #if DEBUG_GRAPHICS printk ("Registers: 0x%lx\n", cards [board].g_regs); printk ("vm_start: 0x%lx\n", vma->vm_start); printk ("address: 0x%lx\n", address); printk ("diff: 0x%lx\n", (address - vma->vm_start)); printk ("page/pfn: 0x%lx\n", page); printk ("TLB entry: %lx\n", pte_val (mk_pte (page + PAGE_OFFSET, PAGE_USERIO))); #endif /* 2. Map this into the current process address space */ page = ((cards [board].g_regs) + (address - vma->vm_start)); return page + PAGE_OFFSET; } /* * We convert a GFX ioctl for mapping hardware registers, in a nice sys_mmap * call, which takes care of everything that must be taken care of. * */ static struct vm_operations_struct graphics_mmap = { NULL, /* no special mmap-open */ NULL, /* no special mmap-close */ NULL, /* no special mmap-unmap */ NULL, /* no special mmap-protect */ NULL, /* no special mmap-sync */ NULL, /* no special mmap-advise */ sgi_graphics_nopage, /* our magic no-page fault handler */ NULL, /* no special mmap-wppage */ NULL, /* no special mmap-swapout */ NULL /* no special mmap-swapin */ }; int sgi_graphics_mmap (struct file *file, struct vm_area_struct *vma) { uint size; size = vma->vm_end - vma->vm_start; if (vma->vm_offset & ~PAGE_MASK) return -ENXIO; /* 1. Set our special graphic virtualizer */ vma->vm_ops = &graphics_mmap; /* 2. Set the special tlb permission bits */ vma->vm_page_prot = PAGE_USERIO; /* final setup */ vma->vm_file = file; return 0; } #if 0 /* Do any post card-detection setup on graphics_ops */ static void graphics_ops_post_init (int slot) { /* There is no owner for the card initially */ cards [slot].g_owner = (struct task_struct *) 0; cards [slot].g_user = (struct task_struct *) 0; } #endif struct file_operations sgi_graphics_fops = { NULL, /* llseek */ NULL, /* read */ NULL, /* write */ NULL, /* readdir */ NULL, /* poll */ sgi_graphics_ioctl, /* ioctl */ sgi_graphics_mmap, /* mmap */ sgi_graphics_open, /* open */ NULL, /* flush */ sgi_graphics_close, /* release */ NULL, /* fsync */ NULL, /* check_media_change */ NULL, /* revalidate */ NULL /* lock */ }; /* /dev/graphics */ static struct miscdevice dev_graphics = { SGI_GRAPHICS_MINOR, "sgi-graphics", &sgi_graphics_fops }; /* /dev/opengl */ static struct miscdevice dev_opengl = { SGI_OPENGL_MINOR, "sgi-opengl", &sgi_graphics_fops }; /* This is called later from the misc-init routine */ __initfunc(void gfx_register (void)) { misc_register (&dev_graphics); misc_register (&dev_opengl); } __initfunc(void gfx_init (const char **name)) { #if 0 struct console_ops *console; struct graphics_ops *g; #endif printk ("GFX INIT: "); shmiq_init (); usema_init (); #if 0 if ((g = newport_probe (boards, name)) != 0) { cards [boards] = *g; graphics_ops_post_init (boards); boards++; console = 0; } /* Add more graphic drivers here */ /* Keep passing console around */ #endif if (boards > MAXCARDS) printk (KERN_WARNING "Too many cards found on the system\n"); }