/* * sound/cs4232.c * * The low level driver for Crystal CS4232 based cards. The CS4232 is * a PnP compatible chip which contains a CS4231A codec, SB emulation, * a MPU401 compatible MIDI port, joystick and synthesizer and IDE CD-ROM * interfaces. This is just a temporary driver until full PnP support * gets implemented. Just the WSS codec, FM synth and the MIDI ports are * supported. Other interfaces are left uninitialized. * * Supported chips are: * CS4232 * CS4236 * CS4236B */ /* * Copyright (C) by Hannu Savolainen 1993-1997 * * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL) * Version 2 (June 1991). See the "COPYING" file distributed with this software * for more info. */ #include #include "sound_config.h" #if defined(CONFIG_CS4232) #define KEY_PORT 0x279 /* Same as LPT1 status port */ #define CSN_NUM 0x99 /* Just a random number */ static void CS_OUT (unsigned char a) { outb ((a), KEY_PORT); } #define CS_OUT2(a, b) {CS_OUT(a);CS_OUT(b);} #define CS_OUT3(a, b, c) {CS_OUT(a);CS_OUT(b);CS_OUT(c);} static int mpu_base = 0, mpu_irq = 0; static int mpu_detected = 0; int probe_cs4232_mpu (struct address_info *hw_config) { /* * Just write down the config values. */ mpu_base = hw_config->io_base; mpu_irq = hw_config->irq; return 1; } void attach_cs4232_mpu (struct address_info *hw_config) { } static unsigned char crystal_key[] = /* A 32 byte magic key sequence */ { 0x96, 0x35, 0x9a, 0xcd, 0xe6, 0xf3, 0x79, 0xbc, 0x5e, 0xaf, 0x57, 0x2b, 0x15, 0x8a, 0xc5, 0xe2, 0xf1, 0xf8, 0x7c, 0x3e, 0x9f, 0x4f, 0x27, 0x13, 0x09, 0x84, 0x42, 0xa1, 0xd0, 0x68, 0x34, 0x1a }; int probe_cs4232 (struct address_info *hw_config) { int i, n; int base = hw_config->io_base, irq = hw_config->irq; int dma1 = hw_config->dma, dma2 = hw_config->dma2; static struct wait_queue *cs_sleeper = NULL; static volatile struct snd_wait cs_sleep_flag = {0}; /* * Verify that the I/O port range is free. */ if (check_region (base, 4)) { printk ("cs4232.c: I/O port 0x%03x not free\n", base); return 0; } if (ad1848_detect (hw_config->io_base, NULL, hw_config->osp)) return 1; /* The card is already active */ /* * This version of the driver doesn't use the PnP method when configuring * the card but a simplified method defined by Crystal. This means that * just one CS4232 compatible device can exist on the system. Also this * method conflicts with possible PnP support in the OS. For this reason * driver is just a temporary kludge. */ /* * Repeat initialization few times since it doesn't always succeed in * first time. */ for (n = 0; n < 4; n++) { cs_sleep_flag.opts = WK_NONE; /* * Wake up the card by sending a 32 byte Crystal key to the key port. */ for (i = 0; i < 32; i++) CS_OUT (crystal_key[i]); { unsigned long tlimit; if (HZ / 10) current->timeout = tlimit = jiffies + (HZ / 10); else tlimit = (unsigned long) -1; cs_sleep_flag.opts = WK_SLEEP; interruptible_sleep_on (&cs_sleeper); if (!(cs_sleep_flag.opts & WK_WAKEUP)) { if (jiffies >= tlimit) cs_sleep_flag.opts |= WK_TIMEOUT; } cs_sleep_flag.opts &= ~WK_SLEEP; }; /* Delay */ /* * Now set the CSN (Card Select Number). */ CS_OUT2 (0x06, CSN_NUM); /* * Then set some config bytes. First logical device 0 */ CS_OUT2 (0x15, 0x00); /* Select logical device 0 (WSS/SB/FM) */ CS_OUT3 (0x47, (base >> 8) & 0xff, base & 0xff); /* WSS base */ if (check_region (0x388, 4)) /* Not free */ CS_OUT3 (0x48, 0x00, 0x00) /* FM base off */ else CS_OUT3 (0x48, 0x03, 0x88); /* FM base 0x388 */ CS_OUT3 (0x42, 0x00, 0x00); /* SB base off */ CS_OUT2 (0x22, irq); /* SB+WSS IRQ */ CS_OUT2 (0x2a, dma1); /* SB+WSS DMA */ if (dma2 != -1) CS_OUT2 (0x25, dma2) /* WSS DMA2 */ else CS_OUT2 (0x25, 4); /* No WSS DMA2 */ CS_OUT2 (0x33, 0x01); /* Activate logical dev 0 */ { unsigned long tlimit; if (HZ / 10) current->timeout = tlimit = jiffies + (HZ / 10); else tlimit = (unsigned long) -1; cs_sleep_flag.opts = WK_SLEEP; interruptible_sleep_on (&cs_sleeper); if (!(cs_sleep_flag.opts & WK_WAKEUP)) { if (jiffies >= tlimit) cs_sleep_flag.opts |= WK_TIMEOUT; } cs_sleep_flag.opts &= ~WK_SLEEP; }; /* Delay */ /* * Initialize logical device 3 (MPU) */ #if defined(CONFIG_UART401) && defined(CONFIG_MIDI) if (mpu_base != 0 && mpu_irq != 0) { CS_OUT2 (0x15, 0x03); /* Select logical device 3 (MPU) */ CS_OUT3 (0x47, (mpu_base >> 8) & 0xff, mpu_base & 0xff); /* MPU base */ CS_OUT2 (0x22, mpu_irq); /* MPU IRQ */ CS_OUT2 (0x33, 0x01); /* Activate logical dev 3 */ } #endif /* * Finally activate the chip */ CS_OUT (0x79); { unsigned long tlimit; if (HZ / 5) current->timeout = tlimit = jiffies + (HZ / 5); else tlimit = (unsigned long) -1; cs_sleep_flag.opts = WK_SLEEP; interruptible_sleep_on (&cs_sleeper); if (!(cs_sleep_flag.opts & WK_WAKEUP)) { if (jiffies >= tlimit) cs_sleep_flag.opts |= WK_TIMEOUT; } cs_sleep_flag.opts &= ~WK_SLEEP; }; /* Delay */ /* * Then try to detect the codec part of the chip */ if (ad1848_detect (hw_config->io_base, NULL, hw_config->osp)) return 1; { unsigned long tlimit; if (HZ) current->timeout = tlimit = jiffies + (HZ); else tlimit = (unsigned long) -1; cs_sleep_flag.opts = WK_SLEEP; interruptible_sleep_on (&cs_sleeper); if (!(cs_sleep_flag.opts & WK_WAKEUP)) { if (jiffies >= tlimit) cs_sleep_flag.opts |= WK_TIMEOUT; } cs_sleep_flag.opts &= ~WK_SLEEP; }; /* Longer delay */ } return 0; } void attach_cs4232 (struct address_info *hw_config) { int base = hw_config->io_base, irq = hw_config->irq; int dma1 = hw_config->dma, dma2 = hw_config->dma2; int old_num_mixers = num_mixers; if (dma2 == -1) dma2 = dma1; ad1848_init ("Crystal audio controller", base, irq, dma1, /* Playback DMA */ dma2, /* Capture DMA */ 0, hw_config->osp); if (num_mixers > old_num_mixers) { /* Assume the mixer map is as suggested in the CS4232 databook */ AD1848_REROUTE (SOUND_MIXER_LINE1, SOUND_MIXER_LINE); AD1848_REROUTE (SOUND_MIXER_LINE2, SOUND_MIXER_CD); AD1848_REROUTE (SOUND_MIXER_LINE3, SOUND_MIXER_SYNTH); /* FM synth */ } #if defined(CONFIG_UART401) && defined(CONFIG_MIDI) if (mpu_base != 0 && mpu_irq != 0) { static struct address_info hw_config2 = {0}; /* Ensure it's initialized */ hw_config2.io_base = mpu_base; hw_config2.irq = mpu_irq; hw_config2.dma = -1; hw_config2.dma2 = -1; hw_config2.always_detect = 0; hw_config2.name = NULL; hw_config2.driver_use_1 = 0; hw_config2.driver_use_2 = 0; hw_config2.card_subtype = 0; if (probe_uart401 (&hw_config2)) { mpu_detected = 1; attach_uart401 (&hw_config2); } else { mpu_base = mpu_irq = 0; } } #endif } void unload_cs4232 (struct address_info *hw_config) { int base = hw_config->io_base, irq = hw_config->irq; int dma1 = hw_config->dma, dma2 = hw_config->dma2; if (dma2 == -1) dma2 = dma1; ad1848_unload (base, irq, dma1, /* Playback DMA */ dma2, /* Capture DMA */ 0); #if defined(CONFIG_UART401) && defined(CONFIG_MIDI) if (mpu_base != 0 && mpu_irq != 0 && mpu_detected) { static struct address_info hw_config2 = {0}; /* Ensure it's initialized */ hw_config2.io_base = mpu_base; hw_config2.irq = mpu_irq; hw_config2.dma = -1; hw_config2.dma2 = -1; hw_config2.always_detect = 0; hw_config2.name = NULL; hw_config2.driver_use_1 = 0; hw_config2.driver_use_2 = 0; hw_config2.card_subtype = 0; unload_uart401 (&hw_config2); } #endif } void unload_cs4232_mpu (struct address_info *hw_config) { /* Not required. Handled by cs4232_unload */ } #endif