/* * USB FTDI SIO driver * * Copyright (C) 1999, 2000 * Greg Kroah-Hartman (greg@kroah.com) * Bill Ryder (bryder@sgi.com) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * See Documentation/usb/usb-serial.txt for more information on using this driver * * See http://reality.sgi.com/bryder_wellington/ftdi_sio for upto date testing info * and extra documentation * * (12/3/2000) Bill Ryder * Added support for 8U232AM device. * Moved PID and VIDs into header file only. * Turned on low-latency for the tty (device will do high baudrates) * Added shutdown routine to close files when device removed. * More debug and error message cleanups. * * * (11/13/2000) Bill Ryder * Added spinlock protected open code and close code. * Multiple opens work (sort of - see webpage mentioned above). * Cleaned up comments. Removed multiple PID/VID definitions. * Factorised cts/dtr code * Made use of __FUNCTION__ in dbg's * * (11/01/2000) Adam J. Richter * usb_device_id table support * * (10/05/2000) gkh * Fixed bug with urb->dev not being set properly, now that the usb * core needs it. * * (09/11/2000) gkh * Removed DEBUG #ifdefs with call to usb_serial_debug_data * * (07/19/2000) gkh * Added module_init and module_exit functions to handle the fact that this * driver is a loadable module now. * * (04/04/2000) Bill Ryder * Fixed bugs in TCGET/TCSET ioctls (by removing them - they are * handled elsewhere in the tty io driver chain). * * (03/30/2000) Bill Ryder * Implemented lots of ioctls * Fixed a race condition in write * Changed some dbg's to errs * * (03/26/2000) gkh * Split driver up into device specific pieces. * */ /* Bill Ryder - bryder@sgi.com - wrote the FTDI_SIO implementation */ /* Thanx to FTDI for so kindly providing details of the protocol required */ /* to talk to the device */ /* Thanx to gkh and the rest of the usb dev group for all code I have assimilated :-) */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef CONFIG_USB_SERIAL_DEBUG #define DEBUG #else #undef DEBUG #endif #include #include "usb-serial.h" #include "ftdi_sio.h" static __devinitdata struct usb_device_id id_table_sio [] = { { USB_DEVICE(FTDI_VID, FTDI_SIO_PID) }, { } /* Terminating entry */ }; /* THe 8U232AM has the same API as the sio - but it can support MUCH higher baudrates (921600 at 48MHz/230400 at 12MHz so .. it's baudrate setting codes are different */ static __devinitdata struct usb_device_id id_table_8U232AM [] = { { USB_DEVICE(FTDI_VID, FTDI_8U232AM_PID) }, { } /* Terminating entry */ }; static __devinitdata struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_SIO_PID) }, { USB_DEVICE(FTDI_VID, FTDI_8U232AM_PID) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE (usb, id_table_combined); struct ftdi_private { ftdi_type_t ftdi_type; char last_status_byte; /* device sends this every 40ms when open */ }; /* function prototypes for a FTDI serial converter */ static int ftdi_sio_startup (struct usb_serial *serial); static int ftdi_8U232AM_startup (struct usb_serial *serial); static void ftdi_sio_shutdown (struct usb_serial *serial); static int ftdi_sio_open (struct usb_serial_port *port, struct file *filp); static void ftdi_sio_close (struct usb_serial_port *port, struct file *filp); static int ftdi_sio_write (struct usb_serial_port *port, int from_user, const unsigned char *buf, int count); static void ftdi_sio_write_bulk_callback (struct urb *urb); static void ftdi_sio_read_bulk_callback (struct urb *urb); static void ftdi_sio_set_termios (struct usb_serial_port *port, struct termios * old); static int ftdi_sio_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg); /* Should rename most ftdi_sio's to ftdi_ now since there are two devices which share common code */ struct usb_serial_device_type ftdi_sio_device = { name: "FTDI SIO", id_table: id_table_sio, needs_interrupt_in: MUST_HAVE_NOT, needs_bulk_in: MUST_HAVE, needs_bulk_out: MUST_HAVE, num_interrupt_in: 0, num_bulk_in: 1, num_bulk_out: 1, num_ports: 1, open: ftdi_sio_open, close: ftdi_sio_close, write: ftdi_sio_write, read_bulk_callback: ftdi_sio_read_bulk_callback, write_bulk_callback: ftdi_sio_write_bulk_callback, ioctl: ftdi_sio_ioctl, set_termios: ftdi_sio_set_termios, startup: ftdi_sio_startup, shutdown: ftdi_sio_shutdown, }; struct usb_serial_device_type ftdi_8U232AM_device = { name: "FTDI 8U232AM", id_table: id_table_8U232AM, needs_interrupt_in: DONT_CARE, needs_bulk_in: MUST_HAVE, needs_bulk_out: MUST_HAVE, num_interrupt_in: 0, num_bulk_in: 1, num_bulk_out: 1, num_ports: 1, open: ftdi_sio_open, close: ftdi_sio_close, write: ftdi_sio_write, read_bulk_callback: ftdi_sio_read_bulk_callback, write_bulk_callback: ftdi_sio_write_bulk_callback, ioctl: ftdi_sio_ioctl, set_termios: ftdi_sio_set_termios, startup: ftdi_8U232AM_startup, shutdown: ftdi_sio_shutdown, }; /* * *************************************************************************** * FTDI SIO Serial Converter specific driver functions * *************************************************************************** */ #define WDR_TIMEOUT (HZ * 5 ) /* default urb timeout */ /* utility functions to set and unset dtr and rts */ #define HIGH 1 #define LOW 0 static int set_rts(struct usb_device *dev, unsigned int pipe, int high_or_low) { static char buf[1]; unsigned ftdi_high_or_low = (high_or_low? FTDI_SIO_SET_RTS_HIGH : FTDI_SIO_SET_RTS_LOW); return(usb_control_msg(dev, pipe, FTDI_SIO_SET_MODEM_CTRL_REQUEST, FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE, ftdi_high_or_low, 0, buf, 0, WDR_TIMEOUT)); } static int set_dtr(struct usb_device *dev, unsigned int pipe, int high_or_low) { static char buf[1]; unsigned ftdi_high_or_low = (high_or_low? FTDI_SIO_SET_DTR_HIGH : FTDI_SIO_SET_DTR_LOW); return(usb_control_msg(dev, pipe, FTDI_SIO_SET_MODEM_CTRL_REQUEST, FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE, ftdi_high_or_low, 0, buf, 0, WDR_TIMEOUT)); } static int ftdi_sio_startup (struct usb_serial *serial) { struct ftdi_private *priv; init_waitqueue_head(&serial->port[0].write_wait); priv = serial->port->private = kmalloc(sizeof(struct ftdi_private), GFP_KERNEL); if (!priv){ err(__FUNCTION__"- kmalloc(%Zd) failed.", sizeof(struct ftdi_private)); return -ENOMEM; } priv->ftdi_type = sio; return (0); } static int ftdi_8U232AM_startup (struct usb_serial *serial) { struct ftdi_private *priv; init_waitqueue_head(&serial->port[0].write_wait); priv = serial->port->private = kmalloc(sizeof(struct ftdi_private), GFP_KERNEL); if (!priv){ err(__FUNCTION__"- kmalloc(%Zd) failed.", sizeof(struct ftdi_private)); return -ENOMEM; } priv->ftdi_type = F8U232AM; return (0); } static void ftdi_sio_shutdown (struct usb_serial *serial) { dbg (__FUNCTION__); /* Close ports if they are open */ while (serial->port[0].open_count > 0) { ftdi_sio_close (&serial->port[0], NULL); } if (serial->port->private){ kfree(serial->port->private); serial->port->private = NULL; } } static int ftdi_sio_open (struct usb_serial_port *port, struct file *filp) { /* ftdi_sio_open */ struct termios tmp_termios; struct usb_serial *serial = port->serial; unsigned long flags; /* Used for spinlock */ int result; char buf[1]; /* Needed for the usb_control_msg I think */ dbg(__FUNCTION__); spin_lock_irqsave (&port->port_lock, flags); MOD_INC_USE_COUNT; ++port->open_count; if (!port->active){ port->active = 1; spin_unlock_irqrestore (&port->port_lock, flags); /* do not allow a task to be queued to deliver received data */ port->tty->low_latency = 1; /* No error checking for this (will get errors later anyway) */ /* See ftdi_sio.h for description of what is reset */ usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), FTDI_SIO_RESET_REQUEST, FTDI_SIO_RESET_REQUEST_TYPE, FTDI_SIO_RESET_SIO, 0, buf, 0, WDR_TIMEOUT); /* Setup termios defaults. According to tty_io.c the settings are driver specific */ port->tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; /* ftdi_sio_set_termios will send usb control messages */ ftdi_sio_set_termios(port, &tmp_termios); /* Turn on RTS and DTR since we are not flow controlling by default */ if (set_dtr(serial->dev, usb_sndctrlpipe(serial->dev, 0),HIGH) < 0) { err(__FUNCTION__ " Error from DTR HIGH urb"); } if (set_rts(serial->dev, usb_sndctrlpipe(serial->dev, 0),HIGH) < 0){ err(__FUNCTION__ " Error from RTS HIGH urb"); } /* Start reading from the device */ FILL_BULK_URB(port->read_urb, serial->dev, usb_rcvbulkpipe(serial->dev, port->bulk_in_endpointAddress), port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length, ftdi_sio_read_bulk_callback, port); result = usb_submit_urb(port->read_urb); if (result) err(__FUNCTION__ " - failed submitting read urb, error %d", result); } else { /* the port was already active - so no initialisation is done */ spin_unlock_irqrestore (&port->port_lock, flags); } return (0); } /* ftdi_sio_open */ static void ftdi_sio_close (struct usb_serial_port *port, struct file *filp) { /* ftdi_sio_close */ struct usb_serial *serial = port->serial; unsigned int c_cflag = port->tty->termios->c_cflag; char buf[1]; unsigned long flags; dbg( __FUNCTION__); spin_lock_irqsave (&port->port_lock, flags); --port->open_count; if (port->open_count <= 0) { spin_unlock_irqrestore (&port->port_lock, flags); if (c_cflag & HUPCL){ /* Disable flow control */ if (usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), FTDI_SIO_SET_FLOW_CTRL_REQUEST, FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, 0, 0, buf, 0, WDR_TIMEOUT) < 0) { err("error from flowcontrol urb"); } /* drop DTR */ if (set_dtr(serial->dev, usb_sndctrlpipe(serial->dev, 0), LOW) < 0){ err("Error from DTR LOW urb"); } /* drop RTS */ if (set_rts(serial->dev, usb_sndctrlpipe(serial->dev, 0),LOW) < 0) { err("Error from RTS LOW urb"); } } /* Note change no line is hupcl is off */ /* shutdown our bulk reads and writes */ usb_unlink_urb (port->write_urb); usb_unlink_urb (port->read_urb); port->active = 0; port->open_count = 0; } else { spin_unlock_irqrestore (&port->port_lock, flags); /* Send a HUP if necessary */ if (!(port->tty->termios->c_cflag & CLOCAL)){ tty_hangup(port->tty); } } MOD_DEC_USE_COUNT; } /* ftdi_sio_close */ /* The ftdi_sio requires the first byte to have: * B0 1 * B1 0 * B2..7 length of message excluding byte 0 */ static int ftdi_sio_write (struct usb_serial_port *port, int from_user, const unsigned char *buf, int count) { /* ftdi_sio_write */ struct usb_serial *serial = port->serial; struct ftdi_private *priv = (struct ftdi_private *)port->private; int data_offset ; int rc; int result; DECLARE_WAITQUEUE(wait, current); dbg(__FUNCTION__ " port %d, %d bytes", port->number, count); if (count == 0) { err("write request of 0 bytes"); return 0; } if (priv->ftdi_type == sio){ data_offset = 1; } else { data_offset = 0; } dbg("data_offset set to %d",data_offset); /* only do something if we have a bulk out endpoint */ if (serial->num_bulk_out) { unsigned char *first_byte = port->write_urb->transfer_buffer; /* Was seeing a race here, got a read callback, then write callback before hitting interuptible_sleep_on - so wrapping in a wait_queue */ add_wait_queue(&port->write_wait, &wait); set_current_state (TASK_INTERRUPTIBLE); while (port->write_urb->status == -EINPROGRESS) { dbg(__FUNCTION__ " write in progress - retrying"); if (signal_pending(current)) { current->state = TASK_RUNNING; remove_wait_queue(&port->write_wait, &wait); rc = -ERESTARTSYS; goto err; } schedule(); } remove_wait_queue(&port->write_wait, &wait); set_current_state(TASK_RUNNING); count += data_offset; count = (count > port->bulk_out_size) ? port->bulk_out_size : count; if (count == 0) { return 0; } /* Copy in the data to send */ if (from_user) { copy_from_user(port->write_urb->transfer_buffer + data_offset , buf, count - data_offset ); } else { memcpy(port->write_urb->transfer_buffer + data_offset, buf, count - data_offset ); } first_byte = port->write_urb->transfer_buffer; if (data_offset > 0){ /* Write the control byte at the front of the packet*/ *first_byte = 1 | ((count-data_offset) << 2) ; } dbg(__FUNCTION__ " Bytes: %d, First Byte: 0o%03o",count, first_byte[0]); usb_serial_debug_data (__FILE__, __FUNCTION__, count, first_byte); /* send the data out the bulk port */ FILL_BULK_URB(port->write_urb, serial->dev, usb_sndbulkpipe(serial->dev, port->bulk_out_endpointAddress), port->write_urb->transfer_buffer, count, ftdi_sio_write_bulk_callback, port); result = usb_submit_urb(port->write_urb); if (result) { err(__FUNCTION__ " - failed submitting write urb, error %d", result); return 0; } dbg(__FUNCTION__ " write returning: %d", count - data_offset); return (count - data_offset); } /* no bulk out, so return 0 bytes written */ return 0; err: /* error exit */ return(rc); } /* ftdi_sio_write */ static void ftdi_sio_write_bulk_callback (struct urb *urb) { struct usb_serial_port *port = (struct usb_serial_port *)urb->context; struct usb_serial *serial; struct tty_struct *tty = port->tty; dbg("ftdi_sio_write_bulk_callback"); if (port_paranoia_check (port, "ftdi_sio_write_bulk_callback")) { return; } serial = port->serial; if (serial_paranoia_check (serial, "ftdi_sio_write_bulk_callback")) { return; } if (urb->status) { dbg("nonzero write bulk status received: %d", urb->status); return; } wake_up_interruptible(&port->write_wait); if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) && tty->ldisc.write_wakeup) (tty->ldisc.write_wakeup)(tty); wake_up_interruptible(&tty->write_wait); return; } /* ftdi_sio_write_bulk_callback */ static void ftdi_sio_read_bulk_callback (struct urb *urb) { /* ftdi_sio_serial_buld_callback */ struct usb_serial_port *port = (struct usb_serial_port *)urb->context; struct ftdi_private *priv = (struct ftdi_private *)port->private; struct usb_serial *serial; struct tty_struct *tty = port->tty ; unsigned char *data = urb->transfer_buffer; const int data_offset = 2; int i; int result; dbg(__FUNCTION__); if (port_paranoia_check (port, "ftdi_sio_read_bulk_callback")) { return; } serial = port->serial; if (serial_paranoia_check (serial, "ftdi_sio_read_bulk_callback")) { return; } if (urb->status) { /* This will happen at close every time so it is a dbg not an err */ dbg("nonzero read bulk status received: %d", urb->status); return; } if (urb->actual_length > 2) { usb_serial_debug_data (__FILE__, __FUNCTION__, urb->actual_length, data); } else { dbg("Just status"); } priv->last_status_byte = data[0]; /* this has modem control lines */ /* TO DO -- check for hung up line and handle appropriately: */ /* send hangup */ /* See acm.c - you do a tty_hangup - eg tty_hangup(tty) */ /* if CD is dropped and the line is not CLOCAL then we should hangup */ if (urb->actual_length > data_offset) { for (i = data_offset ; i < urb->actual_length ; ++i) { tty_insert_flip_char(tty, data[i], 0); } tty_flip_buffer_push(tty); } /* Continue trying to always read */ FILL_BULK_URB(urb, serial->dev, usb_rcvbulkpipe(serial->dev, port->bulk_in_endpointAddress), urb->transfer_buffer, urb->transfer_buffer_length, ftdi_sio_read_bulk_callback, port); result = usb_submit_urb(urb); if (result) err(__FUNCTION__ " - failed resubmitting read urb, error %d", result); return; } /* ftdi_sio_serial_read_bulk_callback */ __u16 translate_baudrate_to_ftdi(unsigned int cflag, ftdi_type_t ftdi_type) { /* translate_baudrate_to_ftdi */ __u16 urb_value = ftdi_sio_b9600; if (ftdi_type == sio){ switch(cflag & CBAUD){ case B0: break; /* ignored by this */ case B300: urb_value = ftdi_sio_b300; dbg("Set to 300"); break; case B600: urb_value = ftdi_sio_b600; dbg("Set to 600") ; break; case B1200: urb_value = ftdi_sio_b1200; dbg("Set to 1200") ; break; case B2400: urb_value = ftdi_sio_b2400; dbg("Set to 2400") ; break; case B4800: urb_value = ftdi_sio_b4800; dbg("Set to 4800") ; break; case B9600: urb_value = ftdi_sio_b9600; dbg("Set to 9600") ; break; case B19200: urb_value = ftdi_sio_b19200; dbg("Set to 19200") ; break; case B38400: urb_value = ftdi_sio_b38400; dbg("Set to 38400") ; break; case B57600: urb_value = ftdi_sio_b57600; dbg("Set to 57600") ; break; case B115200: urb_value = ftdi_sio_b115200; dbg("Set to 115200") ; break; default: dbg(__FUNCTION__ " FTDI_SIO does not support the baudrate (%d) requested", (cflag & CBAUD)); break; } } else { /* it is 8U232AM */ switch(cflag & CBAUD){ case B0: break; /* ignored by this */ case B300: urb_value = ftdi_8U232AM_48MHz_b300; dbg("Set to 300"); break; case B600: urb_value = ftdi_8U232AM_48MHz_b600; dbg("Set to 600") ; break; case B1200: urb_value = ftdi_8U232AM_48MHz_b1200; dbg("Set to 1200") ; break; case B2400: urb_value = ftdi_8U232AM_48MHz_b2400; dbg("Set to 2400") ; break; case B4800: urb_value = ftdi_8U232AM_48MHz_b4800; dbg("Set to 4800") ; break; case B9600: urb_value = ftdi_8U232AM_48MHz_b9600; dbg("Set to 9600") ; break; case B19200: urb_value = ftdi_8U232AM_48MHz_b19200; dbg("Set to 19200") ; break; case B38400: urb_value = ftdi_8U232AM_48MHz_b38400; dbg("Set to 38400") ; break; case B57600: urb_value = ftdi_8U232AM_48MHz_b57600; dbg("Set to 57600") ; break; case B115200: urb_value = ftdi_8U232AM_48MHz_b115200; dbg("Set to 115200") ; break; case B230400: urb_value = ftdi_8U232AM_48MHz_b230400; dbg("Set to 230400") ; break; case B460800: urb_value = ftdi_8U232AM_48MHz_b460800; dbg("Set to 460800") ; break; case B921600: urb_value = ftdi_8U232AM_48MHz_b921600; dbg("Set to 921600") ; break; default: dbg(__FUNCTION__ " The baudrate (%d) requested is not implemented", (cflag & CBAUD)); break; } } return(urb_value); } /* As I understand this - old_termios contains the original termios settings */ /* and tty->termios contains the new setting to be used */ /* */ /* WARNING: set_termios calls this with old_termios in kernel space */ static void ftdi_sio_set_termios (struct usb_serial_port *port, struct termios *old_termios) { /* ftdi_sio_set_termios */ struct usb_serial *serial = port->serial; unsigned int cflag = port->tty->termios->c_cflag; struct ftdi_private *priv = (struct ftdi_private *)port->private; __u16 urb_value; /* will hold the new flags */ char buf[1]; /* Perhaps I should dynamically alloc this? */ dbg(__FUNCTION__); /* FIXME -For this cut I don't care if the line is really changing or not - so just do the change regardless - should be able to compare old_termios and tty->termios */ /* NOTE These routines can get interrupted by ftdi_sio_read_bulk_callback - need to examine what this means - don't see any problems yet */ /* Set number of data bits, parity, stop bits */ urb_value = 0; urb_value |= (cflag & CSTOPB ? FTDI_SIO_SET_DATA_STOP_BITS_2 : FTDI_SIO_SET_DATA_STOP_BITS_1); urb_value |= (cflag & PARENB ? (cflag & PARODD ? FTDI_SIO_SET_DATA_PARITY_ODD : FTDI_SIO_SET_DATA_PARITY_EVEN) : FTDI_SIO_SET_DATA_PARITY_NONE); if (cflag & CSIZE) { switch (cflag & CSIZE) { case CS5: urb_value |= 5; dbg("Setting CS5"); break; case CS6: urb_value |= 6; dbg("Setting CS6"); break; case CS7: urb_value |= 7; dbg("Setting CS7"); break; case CS8: urb_value |= 8; dbg("Setting CS8"); break; default: err("CSIZE was set but not CS5-CS8"); } } if (usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), FTDI_SIO_SET_DATA_REQUEST, FTDI_SIO_SET_DATA_REQUEST_TYPE, urb_value , 0, buf, 0, 100) < 0) { err(__FUNCTION__ " FAILED to set databits/stopbits/parity"); } /* Now do the baudrate */ urb_value = translate_baudrate_to_ftdi((cflag & CBAUD), priv->ftdi_type); if ((cflag & CBAUD) == B0 ) { /* Disable flow control */ if (usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), FTDI_SIO_SET_FLOW_CTRL_REQUEST, FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, 0, 0, buf, 0, WDR_TIMEOUT) < 0) { err(__FUNCTION__ " error from disable flowcontrol urb"); } /* Drop RTS and DTR */ if (set_dtr(serial->dev, usb_sndctrlpipe(serial->dev, 0),LOW) < 0){ err(__FUNCTION__ " Error from DTR LOW urb"); } if (set_rts(serial->dev, usb_sndctrlpipe(serial->dev, 0),LOW) < 0){ err(__FUNCTION__ " Error from RTS LOW urb"); } } else { /* set the baudrate determined before */ if (usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), FTDI_SIO_SET_BAUDRATE_REQUEST, FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE, urb_value, 0, buf, 0, 100) < 0) { err(__FUNCTION__ " urb failed to set baurdrate"); } } /* Set flow control */ /* Note device also supports DTR/CD (ugh) and Xon/Xoff in hardware */ if (cflag & CRTSCTS) { dbg(__FUNCTION__ " Setting to CRTSCTS flow control"); if (usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), FTDI_SIO_SET_FLOW_CTRL_REQUEST, FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, 0 , FTDI_SIO_RTS_CTS_HS, buf, 0, WDR_TIMEOUT) < 0) { err("urb failed to set to rts/cts flow control"); } } else { /* CHECKME Assuming XON/XOFF handled by tty stack - not by device */ dbg(__FUNCTION__ " Turning off hardware flow control"); if (usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), FTDI_SIO_SET_FLOW_CTRL_REQUEST, FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, 0, 0, buf, 0, WDR_TIMEOUT) < 0) { err("urb failed to clear flow control"); } } return; } /* ftdi_sio_set_termios */ static int ftdi_sio_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg) { struct usb_serial *serial = port->serial; struct ftdi_private *priv = (struct ftdi_private *)port->private; __u16 urb_value=0; /* Will hold the new flags */ char buf[1]; int ret, mask; dbg(__FUNCTION__ " cmd 0x%04x", cmd); /* Based on code from acm.c and others */ switch (cmd) { case TIOCMGET: dbg(__FUNCTION__ " TIOCMGET"); /* The MODEM_STATUS_REQUEST works for the sio but not the 232 */ if (priv->ftdi_type == sio){ /* TO DECIDE - use the 40ms status packets or not? */ /* PRO: No need to send urb */ /* CON: Could be 40ms out of date */ /* Request the status from the device */ if ((ret = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), FTDI_SIO_GET_MODEM_STATUS_REQUEST, FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE, 0, 0, buf, 1, WDR_TIMEOUT)) < 0 ) { err(__FUNCTION__ " Could not get modem status of device - err: %d", ret); return(ret); } } else { /* This gets updated every 40ms - so just copy it in */ buf[0] = priv->last_status_byte; } return put_user((buf[0] & FTDI_SIO_DSR_MASK ? TIOCM_DSR : 0) | (buf[0] & FTDI_SIO_CTS_MASK ? TIOCM_CTS : 0) | (buf[0] & FTDI_SIO_RI_MASK ? TIOCM_RI : 0) | (buf[0] & FTDI_SIO_RLSD_MASK ? TIOCM_CD : 0), (unsigned long *) arg); break; case TIOCMSET: /* Turns on and off the lines as specified by the mask */ dbg(__FUNCTION__ " TIOCMSET"); if ((ret = get_user(mask, (unsigned long *) arg))) return ret; urb_value = ((mask & TIOCM_DTR) ? HIGH : LOW); if (set_dtr(serial->dev, usb_sndctrlpipe(serial->dev, 0),urb_value) < 0){ err("Error from DTR set urb (TIOCMSET)"); } urb_value = ((mask & TIOCM_RTS) ? HIGH : LOW); if (set_rts(serial->dev, usb_sndctrlpipe(serial->dev, 0),urb_value) < 0){ err("Error from RTS set urb (TIOCMSET)"); } break; case TIOCMBIS: /* turns on (Sets) the lines as specified by the mask */ dbg(__FUNCTION__ " TIOCMBIS"); if ((ret = get_user(mask, (unsigned long *) arg))) return ret; if (mask & TIOCM_DTR){ if ((ret = set_dtr(serial->dev, usb_sndctrlpipe(serial->dev, 0), HIGH)) < 0) { err("Urb to set DTR failed"); return(ret); } } if (mask & TIOCM_RTS) { if ((ret = set_rts(serial->dev, usb_sndctrlpipe(serial->dev, 0), HIGH)) < 0){ err("Urb to set RTS failed"); return(ret); } } break; case TIOCMBIC: /* turns off (Clears) the lines as specified by the mask */ dbg(__FUNCTION__ " TIOCMBIC"); if ((ret = get_user(mask, (unsigned long *) arg))) return ret; if (mask & TIOCM_DTR){ if ((ret = set_dtr(serial->dev, usb_sndctrlpipe(serial->dev, 0), LOW)) < 0){ err("Urb to unset DTR failed"); return(ret); } } if (mask & TIOCM_RTS) { if ((ret = set_rts(serial->dev, usb_sndctrlpipe(serial->dev, 0), LOW)) < 0){ err("Urb to unset RTS failed"); return(ret); } } break; /* * I had originally implemented TCSET{A,S}{,F,W} and * TCGET{A,S} here separately, however when testing I * found that the higher layers actually do the termios * conversions themselves and pass the call onto * ftdi_sio_set_termios. * */ default: /* This is not an error - turns out the higher layers will do * some ioctls itself (see comment above) */ dbg(__FUNCTION__ " arg not supported - it was 0x%04x",cmd); return(-ENOIOCTLCMD); break; } return 0; } /* ftdi_sio_ioctl */ static int __init ftdi_sio_init (void) { dbg(__FUNCTION__); usb_serial_register (&ftdi_sio_device); usb_serial_register (&ftdi_8U232AM_device); return 0; } static void __exit ftdi_sio_exit (void) { dbg(__FUNCTION__); usb_serial_deregister (&ftdi_sio_device); usb_serial_deregister (&ftdi_8U232AM_device); } module_init(ftdi_sio_init); module_exit(ftdi_sio_exit); MODULE_AUTHOR("Greg Kroah-Hartman , Bill Ryder "); MODULE_DESCRIPTION("USB FTDI RS232 converters driver");