/* $Id: sgint23.h,v 1.5 1999/10/09 00:01:43 ralf Exp $ * * sgint23.h: Defines for the SGI INT2 and INT3 chipsets. * * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com) * Copyright (C) 1999 Andrew R. Baker (andrewb@uab.edu) - INT2 corrections */ #ifndef _ASM_SGINT23_H #define _ASM_SGINT23_H /* These are the virtual IRQ numbers, we divide all IRQ's into * 'spaces', the 'space' determines where and how to enable/disable * that particular IRQ on an SGI machine. Add new 'spaces' as new * IRQ hardware is supported. */ #define SGINT_LOCAL0 0 /* INDY has 8 local0 irq levels */ #define SGINT_LOCAL1 8 /* INDY has 8 local1 irq levels */ #define SGINT_LOCAL2 16 /* INDY has 8 local2 vectored irq levels */ #define SGINT_LOCAL3 24 /* INDY has 8 local3 vectored irq levels */ #define SGINT_GIO 32 /* INDY has 9 GIO irq levels */ #define SGINT_HPCDMA 41 /* INDY has 11 HPCDMA irq _sources_ */ #define SGINT_END 52 /* End of 'spaces' */ /* Individual interrupt definitions for the INDY and Indigo2 */ #define SGI_WD93_0_IRQ SGINT_LOCAL0 + 1 /* 1st onboard WD93 */ #define SGI_WD93_1_IRQ SGINT_LOCAL0 + 2 /* 2nd onboard WD93 */ #define SGI_ENET_IRQ SGINT_LOCAL0 + 3 /* onboard ethernet */ #define SGI_PANEL_IRQ SGINT_LOCAL1 + 1 /* front panel */ #define SGI_EISA_IRQ SGINT_LOCAL2 + 3 /* EISA interrupts */ #define SGI_KEYBOARD_IRQ SGINT_LOCAL2 + 4 /* keyboard */ #define SGI_SERIAL_IRQ SGINT_LOCAL2 + 5 /* onboard serial */ /* Individual interrupt definitions for the INDY and Indigo2 */ #define SGI_WD93_0_IRQ SGINT_LOCAL0 + 1 /* 1st onboard WD93 */ #define SGI_WD93_1_IRQ SGINT_LOCAL0 + 2 /* 2nd onboard WD93 */ #define SGI_ENET_IRQ SGINT_LOCAL0 + 3 /* onboard ethernet */ #define SGI_PANEL_IRQ SGINT_LOCAL1 + 1 /* front panel */ #define SGI_EISA_IRQ SGINT_LOCAL2 + 3 /* EISA interrupts */ #define SGI_KEYBOARD_IRQ SGINT_LOCAL2 + 4 /* keyboard */ #define SGI_SERIAL_IRQ SGINT_LOCAL2 + 5 /* onboard serial */ /* INT2 occupies HPC PBUS slot 4, INT3 uses slot 6. */ #define SGI_INT2_BASE 0x1fbd9000 /* physical */ #define SGI_INT3_BASE 0x1fbd9880 /* physical */ struct sgi_ioc_ints { #ifdef __MIPSEB__ unsigned char _unused0[3]; volatile unsigned char istat0; /* Interrupt status zero */ #else volatile unsigned char istat0; /* Interrupt status zero */ unsigned char _unused0[3]; #endif #define ISTAT0_FFULL 0x01 #define ISTAT0_SCSI0 0x02 #define ISTAT0_SCSI1 0x04 #define ISTAT0_ENET 0x08 #define ISTAT0_GFXDMA 0x10 #define ISTAT0_LPR 0x20 #define ISTAT0_HPC2 0x40 #define ISTAT0_LIO2 0x80 #ifdef __MIPSEB__ unsigned char _unused1[3]; volatile unsigned char imask0; /* Interrupt mask zero */ unsigned char _unused2[3]; volatile unsigned char istat1; /* Interrupt status one */ #else volatile unsigned char imask0; /* Interrupt mask zero */ unsigned char _unused1[3]; volatile unsigned char istat1; /* Interrupt status one */ unsigned char _unused2[3]; #endif #define ISTAT1_ISDNI 0x01 #define ISTAT1_PWR 0x02 #define ISTAT1_ISDNH 0x04 #define ISTAT1_LIO3 0x08 #define ISTAT1_HPC3 0x10 #define ISTAT1_AFAIL 0x20 #define ISTAT1_VIDEO 0x40 #define ISTAT1_GIO2 0x80 #ifdef __MIPSEB__ unsigned char _unused3[3]; volatile unsigned char imask1; /* Interrupt mask one */ unsigned char _unused4[3]; volatile unsigned char vmeistat; /* VME interrupt status */ unsigned char _unused5[3]; volatile unsigned char cmeimask0; /* VME interrupt mask zero */ unsigned char _unused6[3]; volatile unsigned char cmeimask1; /* VME interrupt mask one */ unsigned char _unused7[3]; volatile unsigned char cmepol; /* VME polarity */ #else volatile unsigned char imask1; /* Interrupt mask one */ unsigned char _unused3[3]; volatile unsigned char vmeistat; /* VME interrupt status */ unsigned char _unused4[3]; volatile unsigned char cmeimask0; /* VME interrupt mask zero */ unsigned char _unused5[3]; volatile unsigned char cmeimask1; /* VME interrupt mask one */ unsigned char _unused6[3]; volatile unsigned char cmepol; /* VME polarity */ unsigned char _unused7[3]; #endif }; struct sgi_ioc_timers { #ifdef __MIPSEB__ unsigned char _unused0[3]; volatile unsigned char tcnt0; /* counter 0 */ unsigned char _unused1[3]; volatile unsigned char tcnt1; /* counter 1 */ unsigned char _unused2[3]; volatile unsigned char tcnt2; /* counter 2 */ unsigned char _unused3[3]; volatile unsigned char tcword; /* control word */ #else volatile unsigned char tcnt0; /* counter 0 */ unsigned char _unused0[3]; volatile unsigned char tcnt1; /* counter 1 */ unsigned char _unused1[3]; volatile unsigned char tcnt2; /* counter 2 */ unsigned char _unused2[3]; volatile unsigned char tcword; /* control word */ unsigned char _unused3[3]; #endif }; /* Timer control word bits. */ #define SGINT_TCWORD_BCD 0x01 /* Use BCD mode for counters */ #define SGINT_TCWORD_MMASK 0x0e /* Mode bitmask. */ #define SGINT_TCWORD_MITC 0x00 /* IRQ on terminal count (doesn't work) */ #define SGINT_TCWORD_MOS 0x02 /* One-shot IRQ mode. */ #define SGINT_TCWORD_MRGEN 0x04 /* Normal rate generation */ #define SGINT_TCWORD_MSWGEN 0x06 /* Square wave generator mode */ #define SGINT_TCWORD_MSWST 0x08 /* Software strobe */ #define SGINT_TCWORD_MHWST 0x0a /* Hardware strobe */ #define SGINT_TCWORD_CMASK 0x30 /* Command mask */ #define SGINT_TCWORD_CLAT 0x00 /* Latch command */ #define SGINT_TCWORD_CLSB 0x10 /* LSB read/write */ #define SGINT_TCWORD_CMSB 0x20 /* MSB read/write */ #define SGINT_TCWORD_CALL 0x30 /* Full counter read/write */ #define SGINT_TCWORD_CNT0 0x00 /* Select counter zero */ #define SGINT_TCWORD_CNT1 0x40 /* Select counter one */ #define SGINT_TCWORD_CNT2 0x80 /* Select counter two */ #define SGINT_TCWORD_CRBCK 0xc0 /* Readback command */ #define SGINT_TCSAMP_COUNTER 10255 /* FIXME: What does this really look like? It was written to have * 17 registers, but there are only 16 in my Indigo2. * I guessed at which one to remove... - andrewb */ struct sgi_int2_regs { struct sgi_ioc_ints ints; volatile unsigned long ledbits; /* LED control bits */ #define INT2_LED_TXCLK 0x01 /* GPI to TXCLK enable */ #define INT2_LED_SERSLCT0 0x02 /* serial port0: 0=apple 1=pc */ #define INT2_LED_SERSLCT1 0x04 /* serial port1: 0=apple 1=pc */ #define INT2_LED_CHEAPER 0x08 /* 0=cheapernet 1=ethernet */ #define INT2_LED_POWEROFF 0x10 /* Power-off request, active high */ #ifdef __MIPSEB__ unsigned char _unused0[3]; volatile unsigned char tclear; /* Timer clear strobe address */ #else volatile unsigned char tclear; /* Timer clear strobe address */ unsigned char _unused0[3]; #endif #define INT2_TCLEAR_T0CLR 0x1 /* Clear timer0 IRQ */ #define INT2_TCLEAR_T1CLR 0x2 /* Clear timer1 IRQ */ /* I am guesing there are only two unused registers here * but I could be wrong... - andrewb */ /* unsigned long _unused[3]; */ unsigned long _unused[2]; struct sgi_ioc_timers timers; }; struct sgi_int3_regs { struct sgi_ioc_ints ints; #ifdef __MIPSEB__ unsigned char _unused0[3]; volatile unsigned char tclear; /* Timer clear strobe address */ #else volatile unsigned char tclear; /* Timer clear strobe address */ unsigned char _unused0[3]; #endif volatile unsigned long estatus; /* Error status reg */ unsigned long _unused1[2]; struct sgi_ioc_timers timers; }; extern struct sgi_int2_regs *sgi_i2regs; extern struct sgi_int3_regs *sgi_i3regs; extern struct sgi_ioc_ints *ioc_icontrol; extern struct sgi_ioc_timers *ioc_timers; extern volatile unsigned char *ioc_tclear; extern void sgint_init(void); extern void indy_timer_init(void); #endif /* !(_ASM_SGINT23_H) */