/* * A collection of structures, addresses, and values associated with * the Motorola MBX boards. This was originally created for the * MBX860, and probably needs revisions for other boards (like the 821). * When this file gets out of control, we can split it up into more * meaningful pieces. * * Copyright (c) 1997 Dan Malek (dmalek@jlc.net) */ #ifndef __MACH_MBX_DEFS #define __MACH_MBX_DEFS /* A Board Information structure that is given to a program when * EPPC-Bug starts it up. */ typedef struct bd_info { unsigned int bi_tag; /* Should be 0x42444944 "BDID" */ unsigned int bi_size; /* Size of this structure */ unsigned int bi_revision; /* revision of this structure */ unsigned int bi_bdate; /* EPPCbug date, i.e. 0x11061997 */ unsigned int bi_memstart; /* Memory start address */ unsigned int bi_memsize; /* Memory (end) size in bytes */ unsigned int bi_intfreq; /* Internal Freq, in Hz */ unsigned int bi_busfreq; /* Bus Freq, in Hz */ unsigned int bi_clun; /* Boot device controller */ unsigned int bi_dlun; /* Boot device logical dev */ } bd_t; /* Memory map for the MBX as configured by EPPC-Bug. We could reprogram * The SIU and PCI bridge, and try to use larger MMU pages, but the * performance gain is not measureable and it certainly complicates the * generic MMU model. * * In a effort to minimize memory usage for embedded applications, any * PCI driver or ISA driver must request or map the region required by * the device. For convenience (and since we can map up to 4 Mbytes with * a single page table page), the MMU initialization will map the * NVRAM, Status/Control registers, CPM Dual Port RAM, and the PCI * Bridge CSRs 1:1 into the kernel address space. */ #define PCI_ISA_IO_ADDR ((uint)0x80000000) #define PCI_ISA_IO_SIZE ((uint)(512 * 1024 * 1024)) #define PCI_ISA_MEM_ADDR ((uint)0xc0000000) #define PCI_ISA_MEM_SIZE ((uint)(512 * 1024 * 1024)) #define PCMCIA_MEM_ADDR ((uint)0xe0000000) #define PCMCIA_MEM_SIZE ((uint)(64 * 1024 * 1024)) #define PCMCIA_DMA_ADDR ((uint)0xe4000000) #define PCMCIA_DMA_SIZE ((uint)(64 * 1024 * 1024)) #define PCMCIA_ATTRB_ADDR ((uint)0xe8000000) #define PCMCIA_ATTRB_SIZE ((uint)(64 * 1024 * 1024)) #define PCMCIA_IO_ADDR ((uint)0xec000000) #define PCMCIA_IO_SIZE ((uint)(64 * 1024 * 1024)) #define NVRAM_ADDR ((uint)0xfa000000) #define NVRAM_SIZE ((uint)(1 * 1024 * 1024)) #define MBX_CSR_ADDR ((uint)0xfa100000) #define MBX_CSR_SIZE ((uint)(1 * 1024 * 1024)) #define IMAP_ADDR ((uint)0xfa200000) #define IMAP_SIZE ((uint)(64 * 1024)) #define PCI_CSR_ADDR ((uint)0xfa210000) #define PCI_CSR_SIZE ((uint)(64 * 1024)) #endif