#ifndef _PPC_PGTABLE_H #define _PPC_PGTABLE_H #include #ifndef __ASSEMBLY__ #include #include #include /* For TASK_SIZE */ #include #include #if defined(CONFIG_4xx) extern void local_flush_tlb_all(void); extern void local_flush_tlb_mm(struct mm_struct *mm); extern void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr); extern void local_flush_tlb_range(struct mm_struct *mm, unsigned long start, unsigned long end); extern inline void flush_hash_page(unsigned context, unsigned long va) { } #elif defined(CONFIG_8xx) #define __tlbia() asm volatile ("tlbia" : : ) extern inline void local_flush_tlb_all(void) { __tlbia(); } extern inline void local_flush_tlb_mm(struct mm_struct *mm) { __tlbia(); } extern inline void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr) { __tlbia(); } extern inline void local_flush_tlb_range(struct mm_struct *mm, unsigned long start, unsigned long end) { __tlbia(); } extern inline void flush_hash_page(unsigned context, unsigned long va) { } #else struct mm_struct; struct vm_area_struct; extern void local_flush_tlb_all(void); extern void local_flush_tlb_mm(struct mm_struct *mm); extern void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr); extern void local_flush_tlb_range(struct mm_struct *mm, unsigned long start, unsigned long end); #endif #define flush_tlb_all local_flush_tlb_all #define flush_tlb_mm local_flush_tlb_mm #define flush_tlb_page local_flush_tlb_page #define flush_tlb_range local_flush_tlb_range extern inline void flush_tlb_pgtables(struct mm_struct *mm, unsigned long start, unsigned long end) { /* PPC has hw page tables. */ } /* * No cache flushing is required when address mappings are * changed, because the caches on PowerPCs are physically * addressed. * Also, when SMP we use the coherency (M) bit of the * BATs and PTEs. -- Cort */ #define flush_cache_all() do { } while (0) #define flush_cache_mm(mm) do { } while (0) #define flush_cache_range(mm, a, b) do { } while (0) #define flush_cache_page(vma, p) do { } while (0) #define flush_icache_page(vma, page) do { } while (0) extern void flush_icache_range(unsigned long, unsigned long); extern void __flush_page_to_ram(unsigned long page_va); #define flush_page_to_ram(page) __flush_page_to_ram((unsigned long) page_address(page)) #define flush_dcache_page(page) do { } while (0) extern unsigned long va_to_phys(unsigned long address); extern pte_t *va_to_pte(unsigned long address); extern unsigned long ioremap_bot, ioremap_base; #endif /* __ASSEMBLY__ */ /* * The PowerPC MMU uses a hash table containing PTEs, together with * a set of 16 segment registers (on 32-bit implementations), to define * the virtual to physical address mapping. * * We use the hash table as an extended TLB, i.e. a cache of currently * active mappings. We maintain a two-level page table tree, much like * that used by the i386, for the sake of the Linux memory management code. * Low-level assembler code in head.S (procedure hash_page) is responsible * for extracting ptes from the tree and putting them into the hash table * when necessary, and updating the accessed and modified bits in the * page table tree. */ /* * The PowerPC MPC8xx uses a TLB with hardware assisted, software tablewalk. * We also use the two level tables, but we can put the real bits in them * needed for the TLB and tablewalk. These definitions require Mx_CTR.PPM = 0, * Mx_CTR.PPCS = 0, and MD_CTR.TWAM = 1. The level 2 descriptor has * additional page protection (when Mx_CTR.PPCS = 1) that allows TLB hit * based upon user/super access. The TLB does not have accessed nor write * protect. We assume that if the TLB get loaded with an entry it is * accessed, and overload the changed bit for write protect. We use * two bits in the software pte that are supposed to be set to zero in * the TLB entry (24 and 25) for these indicators. Although the level 1 * descriptor contains the guarded and writethrough/copyback bits, we can * set these at the page level since they get copied from the Mx_TWC * register when the TLB entry is loaded. We will use bit 27 for guard, since * that is where it exists in the MD_TWC, and bit 26 for writethrough. * These will get masked from the level 2 descriptor at TLB load time, and * copied to the MD_TWC before it gets loaded. */ /* * At present, all PowerPC 400-class processors share a similar TLB * architecture. The instruction and data sides share a unified, * 64-entry, fully-associative TLB which is maintained totally under * software control. In addition, the instruction side has a * hardware-managed, 4-entry, fully-associative TLB which serves as a * first level to the shared TLB. These two TLBs are known as the UTLB * and ITLB, respectively (see "mmu.h" for definitions). */ /* PMD_SHIFT determines the size of the area mapped by the second-level page tables */ #define PMD_SHIFT 22 #define PMD_SIZE (1UL << PMD_SHIFT) #define PMD_MASK (~(PMD_SIZE-1)) /* PGDIR_SHIFT determines what a third-level page table entry can map */ #define PGDIR_SHIFT 22 #define PGDIR_SIZE (1UL << PGDIR_SHIFT) #define PGDIR_MASK (~(PGDIR_SIZE-1)) /* * entries per page directory level: our page-table tree is two-level, so * we don't really have any PMD directory. */ #define PTRS_PER_PTE 1024 #define PTRS_PER_PMD 1 #define PTRS_PER_PGD 1024 #define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE) #define FIRST_USER_PGD_NR 0 #define USER_PGD_PTRS (PAGE_OFFSET >> PGDIR_SHIFT) #define KERNEL_PGD_PTRS (PTRS_PER_PGD-USER_PGD_PTRS) #define pte_ERROR(e) \ printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e)) #define pmd_ERROR(e) \ printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e)) #define pgd_ERROR(e) \ printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) /* * Just any arbitrary offset to the start of the vmalloc VM area: the * current 64MB value just means that there will be a 64MB "hole" after the * physical memory until the kernel virtual memory starts. That means that * any out-of-bounds memory accesses will hopefully be caught. * The vmalloc() routines leaves a hole of 4kB between each vmalloced * area for the same reason. ;) * * We no longer map larger than phys RAM with the BATs so we don't have * to worry about the VMALLOC_OFFSET causing problems. We do have to worry * about clashes between our early calls to ioremap() that start growing down * from ioremap_base being run into the VM area allocations (growing upwards * from VMALLOC_START). For this reason we have ioremap_bot to check when * we actually run into our mappings setup in the early boot with the VM * system. This really does become a problem for machines with good amounts * of RAM. -- Cort */ #define VMALLOC_OFFSET (0x1000000) /* 16M */ #define VMALLOC_START ((((long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))) #define VMALLOC_VMADDR(x) ((unsigned long)(x)) #define VMALLOC_END ioremap_bot /* * Bits in a linux-style PTE. These match the bits in the * (hardware-defined) PowerPC PTE as closely as possible. */ #if defined(CONFIG_4xx) /* Definitions for 4xx embedded chips. */ #define _PAGE_GUARDED 0x001 /* G: page is guarded from prefetch */ #define _PAGE_COHERENT 0x002 /* M: enforece memory coherence */ #define _PAGE_NO_CACHE 0x004 /* I: caching is inhibited */ #define _PAGE_WRITETHRU 0x008 /* W: caching is write-through */ #define _PAGE_USER 0x010 /* matches one of the zone permission bits */ #define _PAGE_PRESENT 0x040 /* software: PTE contains a translation */ #define _PAGE_DIRTY 0x100 /* C: page changed */ #define _PAGE_RW 0x200 /* Writes permitted */ #define _PAGE_ACCESSED 0x400 /* R: page referenced */ #define _PAGE_HWWRITE 0x800 /* software: _PAGE_RW & _PAGE_DIRTY */ #define _PAGE_SHARED 0 #elif defined(CONFIG_8xx) /* Definitions for 8xx embedded chips. */ #define _PAGE_PRESENT 0x0001 /* Page is valid */ #define _PAGE_NO_CACHE 0x0002 /* I: cache inhibit */ #define _PAGE_SHARED 0x0004 /* No ASID (context) compare */ /* These five software bits must be masked out when the entry is loaded * into the TLB. */ #define _PAGE_DIRTY 0x0008 /* software: page changed */ #define _PAGE_GUARDED 0x0010 /* software: guarded access */ #define _PAGE_WRITETHRU 0x0020 /* software: use writethrough cache */ #define _PAGE_RW 0x0040 /* software: user write access allowed */ #define _PAGE_ACCESSED 0x0080 /* software: page referenced */ #define _PAGE_HWWRITE 0x0100 /* C: page changed (write protect) */ #define _PAGE_USER 0x0800 /* One of the PP bits, the other must be 0 */ #else /* CONFIG_6xx */ /* Definitions for 60x, 740/750, etc. */ #define _PAGE_PRESENT 0x001 /* software: pte contains a translation */ #define _PAGE_USER 0x002 /* matches one of the PP bits */ #define _PAGE_RW 0x004 /* software: user write access allowed */ #define _PAGE_GUARDED 0x008 #define _PAGE_COHERENT 0x010 /* M: enforce memory coherence (SMP systems) */ #define _PAGE_NO_CACHE 0x020 /* I: cache inhibit */ #define _PAGE_WRITETHRU 0x040 /* W: cache write-through */ #define _PAGE_DIRTY 0x080 /* C: page changed */ #define _PAGE_ACCESSED 0x100 /* R: page referenced */ #define _PAGE_HWWRITE 0x200 /* software: _PAGE_RW & _PAGE_DIRTY */ #define _PAGE_SHARED 0 #endif #define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY) #ifdef CONFIG_SMP #define _PAGE_BASE _PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_COHERENT #else #define _PAGE_BASE _PAGE_PRESENT | _PAGE_ACCESSED #endif #define _PAGE_WRENABLE _PAGE_RW | _PAGE_DIRTY | _PAGE_HWWRITE #define PAGE_NONE __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED) #define PAGE_SHARED __pgprot(_PAGE_BASE | _PAGE_RW | _PAGE_USER | \ _PAGE_SHARED) #define PAGE_COPY __pgprot(_PAGE_BASE | _PAGE_USER) #define PAGE_READONLY __pgprot(_PAGE_BASE | _PAGE_USER) #define PAGE_KERNEL __pgprot(_PAGE_BASE | _PAGE_WRENABLE | _PAGE_SHARED) #define PAGE_KERNEL_CI __pgprot(_PAGE_BASE | _PAGE_WRENABLE | _PAGE_SHARED | \ _PAGE_NO_CACHE ) /* * The PowerPC can only do execute protection on a segment (256MB) basis, * not on a page basis. So we consider execute permission the same as read. * Also, write permissions imply read permissions. * This is the closest we can get.. */ #define __P000 PAGE_NONE #define __P001 PAGE_READONLY #define __P010 PAGE_COPY #define __P011 PAGE_COPY #define __P100 PAGE_READONLY #define __P101 PAGE_READONLY #define __P110 PAGE_COPY #define __P111 PAGE_COPY #define __S000 PAGE_NONE #define __S001 PAGE_READONLY #define __S010 PAGE_SHARED #define __S011 PAGE_SHARED #define __S100 PAGE_READONLY #define __S101 PAGE_READONLY #define __S110 PAGE_SHARED #define __S111 PAGE_SHARED #ifndef __ASSEMBLY__ /* * ZERO_PAGE is a global shared page that is always zero: used * for zero-mapped memory areas etc.. */ extern unsigned long empty_zero_page[1024]; #define ZERO_PAGE(vaddr) (mem_map + MAP_NR(empty_zero_page)) /* * BAD_PAGETABLE is used when we need a bogus page-table, while * BAD_PAGE is used for a bogus page. * * ZERO_PAGE is a global shared page that is always zero: used * for zero-mapped memory areas etc.. */ extern pte_t __bad_page(void); extern pte_t * __bad_pagetable(void); #define BAD_PAGETABLE __bad_pagetable() #define BAD_PAGE __bad_page() #endif /* __ASSEMBLY__ */ /* number of bits that fit into a memory pointer */ #define BITS_PER_PTR (8*sizeof(unsigned long)) /* to align the pointer to a pointer address */ #define PTR_MASK (~(sizeof(void*)-1)) /* sizeof(void*) == 1<> PAGE_SHIFT))) #define pmd_none(pmd) (!pmd_val(pmd)) #define pmd_bad(pmd) ((pmd_val(pmd) & ~PAGE_MASK) != 0) #define pmd_present(pmd) ((pmd_val(pmd) & PAGE_MASK) != 0) #define pmd_clear(pmdp) do { pmd_val(*(pmdp)) = 0; } while (0) /* * Permanent address of a page. */ #define page_address(page) ((page)->virtual) #define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT)) #define pte_page(x) (mem_map+pte_pagenr(x)) #ifndef __ASSEMBLY__ /* * The "pgd_xxx()" functions here are trivial for a folded two-level * setup: the pgd is never bad, and a pmd always exists (as it's folded * into the pgd entry) */ extern inline int pgd_none(pgd_t pgd) { return 0; } extern inline int pgd_bad(pgd_t pgd) { return 0; } extern inline int pgd_present(pgd_t pgd) { return 1; } #define pgd_clear(xp) do { } while (0) #define pgd_page(pgd) \ ((unsigned long) __va(pgd_val(pgd) & PAGE_MASK)) /* * The following only work if pte_present() is true. * Undefined behaviour if not.. */ extern inline int pte_read(pte_t pte) { return pte_val(pte) & _PAGE_USER; } extern inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_RW; } extern inline int pte_exec(pte_t pte) { return pte_val(pte) & _PAGE_USER; } extern inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; } extern inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; } extern inline void pte_uncache(pte_t pte) { pte_val(pte) |= _PAGE_NO_CACHE; } extern inline void pte_cache(pte_t pte) { pte_val(pte) &= ~_PAGE_NO_CACHE; } extern inline pte_t pte_rdprotect(pte_t pte) { pte_val(pte) &= ~_PAGE_USER; return pte; } extern inline pte_t pte_exprotect(pte_t pte) { pte_val(pte) &= ~_PAGE_USER; return pte; } extern inline pte_t pte_wrprotect(pte_t pte) { pte_val(pte) &= ~(_PAGE_RW | _PAGE_HWWRITE); return pte; } extern inline pte_t pte_mkclean(pte_t pte) { pte_val(pte) &= ~(_PAGE_DIRTY | _PAGE_HWWRITE); return pte; } extern inline pte_t pte_mkold(pte_t pte) { pte_val(pte) &= ~_PAGE_ACCESSED; return pte; } extern inline pte_t pte_mkread(pte_t pte) { pte_val(pte) |= _PAGE_USER; return pte; } extern inline pte_t pte_mkexec(pte_t pte) { pte_val(pte) |= _PAGE_USER; return pte; } extern inline pte_t pte_mkwrite(pte_t pte) { pte_val(pte) |= _PAGE_RW; if (pte_val(pte) & _PAGE_DIRTY) pte_val(pte) |= _PAGE_HWWRITE; return pte; } extern inline pte_t pte_mkdirty(pte_t pte) { pte_val(pte) |= _PAGE_DIRTY; if (pte_val(pte) & _PAGE_RW) pte_val(pte) |= _PAGE_HWWRITE; return pte; } extern inline pte_t pte_mkyoung(pte_t pte) { pte_val(pte) |= _PAGE_ACCESSED; return pte; } /* Certain architectures need to do special things when pte's * within a page table are directly modified. Thus, the following * hook is made available. */ #define set_pte(pteptr, pteval) ((*(pteptr)) = (pteval)) /* * Conversion functions: convert a page and protection to a page entry, * and a page entry and page directory to the page they refer to. */ extern inline pte_t mk_pte_phys(unsigned long physpage, pgprot_t pgprot) { pte_t pte; pte_val(pte) = physpage | pgprot_val(pgprot); return pte; } #define mk_pte(page,pgprot) \ ({ \ pte_t pte; \ pte_val(pte) = ((page - mem_map) << PAGE_SHIFT) | pgprot_val(pgprot); \ pte; \ }) extern inline pte_t pte_modify(pte_t pte, pgprot_t newprot) { pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot); return pte; } #define pmd_page(pmd) (pmd_val(pmd)) /* to find an entry in a kernel page-table-directory */ #define pgd_offset_k(address) pgd_offset(&init_mm, address) /* to find an entry in a page-table-directory */ #define pgd_index(address) ((address) >> PGDIR_SHIFT) #define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address)) /* Find an entry in the second-level page table.. */ extern inline pmd_t * pmd_offset(pgd_t * dir, unsigned long address) { return (pmd_t *) dir; } /* Find an entry in the third-level page table.. */ extern inline pte_t * pte_offset(pmd_t * dir, unsigned long address) { return (pte_t *) pmd_page(*dir) + ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)); } extern pgd_t swapper_pg_dir[1024]; extern void paging_init(void); /* * Page tables may have changed. We don't need to do anything here * as entries are faulted into the hash table by the low-level * data/instruction access exception handlers. */ #define update_mmu_cache(vma, addr, pte) do { } while (0) /* * When flushing the tlb entry for a page, we also need to flush the * hash table entry. flush_hash_page is assembler (for speed) in head.S. */ extern void flush_hash_segments(unsigned low_vsid, unsigned high_vsid); extern void flush_hash_page(unsigned context, unsigned long va); /* Encode and de-code a swap entry */ #define SWP_TYPE(entry) (((entry).val >> 1) & 0x3f) #define SWP_OFFSET(entry) ((entry).val >> 8) #define SWP_ENTRY(type, offset) ((swp_entry_t) { ((type) << 1) | ((offset) << 8) }) #define pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) #define swp_entry_to_pte(x) ((pte_t) { (x).val }) #define module_map vmalloc #define module_unmap vfree /* CONFIG_APUS */ /* For virtual address to physical address conversion */ extern void cache_clear(__u32 addr, int length); extern void cache_push(__u32 addr, int length); extern int mm_end_of_chunk (unsigned long addr, int len); extern unsigned long iopa(unsigned long addr); extern unsigned long mm_ptov(unsigned long addr) __attribute__ ((const)); /* Values for nocacheflag and cmode */ /* These are not used by the APUS kernel_map, but prevents compilation errors. */ #define KERNELMAP_FULL_CACHING 0 #define KERNELMAP_NOCACHE_SER 1 #define KERNELMAP_NOCACHE_NONSER 2 #define KERNELMAP_NO_COPYBACK 3 /* * Map some physical address range into the kernel address space. */ extern unsigned long kernel_map(unsigned long paddr, unsigned long size, int nocacheflag, unsigned long *memavailp ); /* * Set cache mode of (kernel space) address range. */ extern void kernel_set_cachemode (unsigned long address, unsigned long size, unsigned int cmode); /* Needs to be defined here and not in linux/mm.h, as it is arch dependent */ #define PageSkip(page) (0) #define kern_addr_valid(addr) (1) #define io_remap_page_range remap_page_range #endif __ASSEMBLY__ #endif /* _PPC_PGTABLE_H */