/*
 * Header for Microchannel Architecture Bus 
 * Written by Martin Kolinek, February 1996
*/

#ifndef _LINUX_MCA_H
#define _LINUX_MCA_H

/* The detection of MCA bus is done in the real mode (using BIOS).
 * The information is exported to the protected code, where this 
 * variable is set to one in case MCA bus was detected.
*/
extern int  MCA_bus;

/* maximal number of MCA slots - actually, some machines have less, but
they all have sufficient number of POS registers to cover 8. */
#define MCA_MAX_SLOT_NR  8

/* MCA_NOTFOUND is an error condition.  The other two indicate
	motherboard POS registers contain the adapter.  They might be
	returned by the mca_find_adapter() function, and can be used as
	arguments to mca_read_stored_pos().  I'm not going to allow direct
	access to the motherboard registers until we run across an adapter
	that requires it.  We don't know enough about them to know if it's
	safe.

	See Documentation/mca.txt or one of the existing drivers for
	more information.
*/
#define MCA_NOTFOUND	-1
#define MCA_INTEGSCSI	(MCA_MAX_SLOT_NR)
#define MCA_INTEGVIDEO	(MCA_MAX_SLOT_NR+1)

/* max number of adapters, including both slots and various integrated
things. */
#define MCA_NUMADAPTERS (MCA_MAX_SLOT_NR+2)

/* returns the slot of the first enabled adapter matching id.  User can
specify a starting slot beyond zero, to deal with detecting multiple
devices.  Returns MCA_NOTFOUND if id not found.  Also checks the
integrated adapters. */
extern int mca_find_adapter( int id, int start );

/* adapter state info - returns 0 if no */
extern int mca_isadapter( int slot );
extern int mca_isenabled( int slot );

/* gets a byte out of POS register (stored in memory) */
extern unsigned char mca_read_stored_pos( int slot, int reg );

/*
	This can be expanded later.  Right now, it gives us a way of
	getting meaningful information into the MCA_info structure,
	so we can have a more interesting /proc/mca.
*/
extern void mca_set_adapter_name( int slot, char* name );
extern char* mca_get_adapter_name( int slot );

/*
	This sets up an information callback for /proc/mca/slot?.  The
	function is called with the buffer, slot, and device pointer (or
	some equally informative context information, or nothing, if you
	prefer), and is expected to put useful information into the
	buffer.  The adapter name, id, and POS registers get printed
	before this is called though, so don't do it again.

	This should be called with a NULL procfn when a module
	unregisters, thus preventing kernel crashes and other such
	nastiness.
*/
typedef int (*MCA_ProcFn)( char* buf, int slot, void* dev );
extern void mca_set_adapter_procfn( int slot, MCA_ProcFn, void* dev );

/* These routines actually mess with the hardware POS registers.  They
temporarily disable the device (and interrupts), so make sure you know
what you're doing if you use them.  Furthermore, writing to a POS may
result in two devices trying to share a resource, which in turn can
result in multiple devices sharing memory spaces, IRQs, or even trashing
hardware.  YOU HAVE BEEN WARNED.

You can only access slots with this.  Motherboard registers are off
limits.
*/

/* read a byte from the specified POS register. */
extern unsigned char mca_read_pos( int slot, int reg );

/* write a byte to the specified POS register. */
extern void mca_write_pos( int slot, int reg, unsigned char byte );

#endif /* _LINUX_MCA_H */