1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
|
/*
* linux/drivers/block/ns87415.c Version 1.00 December 7, 1997
*
* Copyright (C) 1997-1998 Mark Lord
* Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be)
*
* Inspired by an earlier effort from David S. Miller (davem@caipfs.rutgers.edu)
*/
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/timer.h>
#include <linux/mm.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/blkdev.h>
#include <linux/hdreg.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <asm/io.h>
#include "ide.h"
static unsigned int ns87415_count = 0, ns87415_control[MAX_HWIFS] = { 0 };
/*
* This routine either enables/disables (according to drive->present)
* the IRQ associated with the port (HWIF(drive)),
* and selects either PIO or DMA handshaking for the next I/O operation.
*/
static void ns87415_prepare_drive (ide_drive_t *drive, unsigned int use_dma)
{
ide_hwif_t *hwif = HWIF(drive);
unsigned int bit, other, new, *old = (unsigned int *) hwif->select_data;
struct pci_dev *dev = hwif->pci_dev;
unsigned long flags;
__save_flags(flags); /* local CPU only */
__cli(); /* local CPU only */
new = *old;
/* Adjust IRQ enable bit */
bit = 1 << (8 + hwif->channel);
new = drive->present ? (new & ~bit) : (new | bit);
/* Select PIO or DMA, DMA may only be selected for one drive/channel. */
bit = 1 << (20 + drive->select.b.unit + (hwif->channel << 1));
other = 1 << (20 + (1 - drive->select.b.unit) + (hwif->channel << 1));
new = use_dma ? ((new & ~other) | bit) : (new & ~bit);
if (new != *old) {
*old = new;
(void) pci_write_config_dword(dev, 0x40, new);
}
__restore_flags(flags); /* local CPU only */
}
static void ns87415_selectproc (ide_drive_t *drive)
{
ns87415_prepare_drive (drive, drive->using_dma);
}
static int ns87415_dmaproc(ide_dma_action_t func, ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
byte dma_stat;
switch (func) {
case ide_dma_end: /* returns 1 on error, 0 otherwise */
drive->waiting_for_dma = 0;
dma_stat = inb(hwif->dma_base+2);
outb(inb(hwif->dma_base)&~1, hwif->dma_base); /* stop DMA */
outb(inb(hwif->dma_base)|6, hwif->dma_base); /* from ERRATA: clear the INTR & ERROR bits */
return (dma_stat & 7) != 4; /* verify good DMA status */
case ide_dma_write:
case ide_dma_read:
ns87415_prepare_drive(drive, 1); /* select DMA xfer */
if (!ide_dmaproc(func, drive)) /* use standard DMA stuff */
return 0;
ns87415_prepare_drive(drive, 0); /* DMA failed: select PIO xfer */
return 1;
default:
return ide_dmaproc(func, drive); /* use standard DMA stuff */
}
}
__initfunc(void ide_init_ns87415 (ide_hwif_t *hwif))
{
struct pci_dev *dev = hwif->pci_dev;
unsigned int ctrl, using_inta;
byte progif;
#ifdef __sparc_v9__
int timeout;
byte stat;
#endif
/* Set a good latency timer and cache line size value. */
(void) pci_write_config_byte(dev, PCI_LATENCY_TIMER, 64);
#ifdef __sparc_v9__
(void) pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 0x10);
#endif
/*
* We cannot probe for IRQ: both ports share common IRQ on INTA.
* Also, leave IRQ masked during drive probing, to prevent infinite
* interrupts from a potentially floating INTA..
*
* IRQs get unmasked in selectproc when drive is first used.
*/
(void) pci_read_config_dword(dev, 0x40, &ctrl);
(void) pci_read_config_byte(dev, 0x09, &progif);
/* is irq in "native" mode? */
using_inta = progif & (1 << (hwif->channel << 1));
if (!using_inta)
using_inta = ctrl & (1 << (4 + hwif->channel));
if (hwif->mate) {
hwif->select_data = hwif->mate->select_data;
} else {
hwif->select_data = (unsigned long)
&ns87415_control[ns87415_count++];
ctrl |= (1 << 8) | (1 << 9); /* mask both IRQs */
if (using_inta)
ctrl &= ~(1 << 6); /* unmask INTA */
*((unsigned int *)hwif->select_data) = ctrl;
(void) pci_write_config_dword(dev, 0x40, ctrl);
/*
* Set prefetch size to 512 bytes for both ports,
* but don't turn on/off prefetching here.
*/
pci_write_config_byte(dev, 0x55, 0xee);
#ifdef __sparc_v9__
/*
* XXX: Reset the device, if we don't it will not respond
* to SELECT_DRIVE() properly during first probe_hwif().
*/
timeout = 10000;
outb(12, hwif->io_ports[IDE_CONTROL_OFFSET]);
udelay(10);
outb(8, hwif->io_ports[IDE_CONTROL_OFFSET]);
do {
udelay(50);
stat = inb(hwif->io_ports[IDE_STATUS_OFFSET]);
if (stat == 0xff)
break;
} while ((stat & BUSY_STAT) && --timeout);
#endif
}
outb(0x60, hwif->dma_base + 2);
if (!using_inta)
hwif->irq = hwif->channel ? 15 : 14; /* legacy mode */
else if (!hwif->irq && hwif->mate && hwif->mate->irq)
hwif->irq = hwif->mate->irq; /* share IRQ with mate */
hwif->dmaproc = &ns87415_dmaproc;
hwif->selectproc = &ns87415_selectproc;
}
|
