blob: 8304460eff3763a0190c98cc1b934f2eb2d6a73a (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
|
/*
* linux/drivers/char/cd1865.h -- Definitions relating to the CD1865
* for the Specialix IO8+ multiport serial driver.
*
* Copyright (C) 1997 Roger Wolff (R.E.Wolff@BitWizard.nl)
* Copyright (C) 1994-1996 Dmitry Gorodchanin (pgmdsg@ibi.com)
*
* Specialix pays for the development and support of this driver.
* Please DO contact io8-linux@specialix.co.uk if you require
* support.
*
* This driver was developped in the BitWizard linux device
* driver service. If you require a linux device driver for your
* product, please contact devices@BitWizard.nl for a quote.
*
*/
/*
* Definitions for Driving CD180/CD1864/CD1865 based eightport serial cards.
*/
/* Values of choice for Interrupt ACKs */
/* These values are "obligatory" if you use the register based
* interrupt acknowledgements. See page 99-101 of V2.0 of the CD1865
* databook */
#define SX_ACK_MINT 0x75 /* goes to PILR1 */
#define SX_ACK_TINT 0x76 /* goes to PILR2 */
#define SX_ACK_RINT 0x77 /* goes to PILR3 */
/* Chip ID (is used when chips ar daisy chained.) */
#define SX_ID 0x10
/* Definitions for Cirrus Logic CL-CD186x 8-port async mux chip */
#define CD186x_NCH 8 /* Total number of channels */
#define CD186x_TPC 16 /* Ticks per character */
#define CD186x_NFIFO 8 /* TX FIFO size */
/* Global registers */
#define CD186x_GIVR 0x40 /* Global Interrupt Vector Register */
#define CD186x_GICR 0x41 /* Global Interrupting Channel Register */
#define CD186x_PILR1 0x61 /* Priority Interrupt Level Register 1 */
#define CD186x_PILR2 0x62 /* Priority Interrupt Level Register 2 */
#define CD186x_PILR3 0x63 /* Priority Interrupt Level Register 3 */
#define CD186x_CAR 0x64 /* Channel Access Register */
#define CD186x_SRSR 0x65 /* Channel Access Register */
#define CD186x_GFRCR 0x6b /* Global Firmware Revision Code Register */
#define CD186x_PPRH 0x70 /* Prescaler Period Register High */
#define CD186x_PPRL 0x71 /* Prescaler Period Register Low */
#define CD186x_RDR 0x78 /* Receiver Data Register */
#define CD186x_RCSR 0x7a /* Receiver Character Status Register */
#define CD186x_TDR 0x7b /* Transmit Data Register */
#define CD186x_EOIR 0x7f /* End of Interrupt Register */
#define CD186x_MRAR 0x75 /* Modem Request Acknowlege register */
#define CD186x_TRAR 0x76 /* Transmit Request Acknowlege register */
#define CD186x_RRAR 0x77 /* Receive Request Acknowlege register */
#define CD186x_SRCR 0x66 /* Service Request Configuration register */
/* Channel Registers */
#define CD186x_CCR 0x01 /* Channel Command Register */
#define CD186x_IER 0x02 /* Interrupt Enable Register */
#define CD186x_COR1 0x03 /* Channel Option Register 1 */
#define CD186x_COR2 0x04 /* Channel Option Register 2 */
#define CD186x_COR3 0x05 /* Channel Option Register 3 */
#define CD186x_CCSR 0x06 /* Channel Control Status Register */
#define CD186x_RDCR 0x07 /* Receive Data Count Register */
#define CD186x_SCHR1 0x09 /* Special Character Register 1 */
#define CD186x_SCHR2 0x0a /* Special Character Register 2 */
#define CD186x_SCHR3 0x0b /* Special Character Register 3 */
#define CD186x_SCHR4 0x0c /* Special Character Register 4 */
#define CD186x_MCOR1 0x10 /* Modem Change Option 1 Register */
#define CD186x_MCOR2 0x11 /* Modem Change Option 2 Register */
#define CD186x_MCR 0x12 /* Modem Change Register */
#define CD186x_RTPR 0x18 /* Receive Timeout Period Register */
#define CD186x_MSVR 0x28 /* Modem Signal Value Register */
#define CD186x_MSVRTS 0x29 /* Modem Signal Value Register */
#define CD186x_MSVDTR 0x2a /* Modem Signal Value Register */
#define CD186x_RBPRH 0x31 /* Receive Baud Rate Period Register High */
#define CD186x_RBPRL 0x32 /* Receive Baud Rate Period Register Low */
#define CD186x_TBPRH 0x39 /* Transmit Baud Rate Period Register High */
#define CD186x_TBPRL 0x3a /* Transmit Baud Rate Period Register Low */
/* Global Interrupt Vector Register (R/W) */
#define GIVR_ITMASK 0x07 /* Interrupt type mask */
#define GIVR_IT_MODEM 0x01 /* Modem Signal Change Interrupt */
#define GIVR_IT_TX 0x02 /* Transmit Data Interrupt */
#define GIVR_IT_RCV 0x03 /* Receive Good Data Interrupt */
#define GIVR_IT_REXC 0x07 /* Receive Exception Interrupt */
/* Global Interrupt Channel Register (R/W) */
#define GICR_CHAN 0x1c /* Channel Number Mask */
#define GICR_CHAN_OFF 2 /* Channel Number shift */
/* Channel Address Register (R/W) */
#define CAR_CHAN 0x07 /* Channel Number Mask */
#define CAR_A7 0x08 /* A7 Address Extension (unused) */
/* Receive Character Status Register (R/O) */
#define RCSR_TOUT 0x80 /* Rx Timeout */
#define RCSR_SCDET 0x70 /* Special Character Detected Mask */
#define RCSR_NO_SC 0x00 /* No Special Characters Detected */
#define RCSR_SC_1 0x10 /* Special Char 1 (or 1 & 3) Detected */
#define RCSR_SC_2 0x20 /* Special Char 2 (or 2 & 4) Detected */
#define RCSR_SC_3 0x30 /* Special Char 3 Detected */
#define RCSR_SC_4 0x40 /* Special Char 4 Detected */
#define RCSR_BREAK 0x08 /* Break has been detected */
#define RCSR_PE 0x04 /* Parity Error */
#define RCSR_FE 0x02 /* Frame Error */
#define RCSR_OE 0x01 /* Overrun Error */
/* Channel Command Register (R/W) (commands in groups can be OR-ed) */
#define CCR_HARDRESET 0x81 /* Reset the chip */
#define CCR_SOFTRESET 0x80 /* Soft Channel Reset */
#define CCR_CORCHG1 0x42 /* Channel Option Register 1 Changed */
#define CCR_CORCHG2 0x44 /* Channel Option Register 2 Changed */
#define CCR_CORCHG3 0x48 /* Channel Option Register 3 Changed */
#define CCR_SSCH1 0x21 /* Send Special Character 1 */
#define CCR_SSCH2 0x22 /* Send Special Character 2 */
#define CCR_SSCH3 0x23 /* Send Special Character 3 */
#define CCR_SSCH4 0x24 /* Send Special Character 4 */
#define CCR_TXEN 0x18 /* Enable Transmitter */
#define CCR_RXEN 0x12 /* Enable Receiver */
#define CCR_TXDIS 0x14 /* Disable Transmitter */
#define CCR_RXDIS 0x11 /* Disable Receiver */
/* Interrupt Enable Register (R/W) */
#define IER_DSR 0x80 /* Enable interrupt on DSR change */
#define IER_CD 0x40 /* Enable interrupt on CD change */
#define IER_CTS 0x20 /* Enable interrupt on CTS change */
#define IER_RXD 0x10 /* Enable interrupt on Receive Data */
#define IER_RXSC 0x08 /* Enable interrupt on Receive Spec. Char */
#define IER_TXRDY 0x04 /* Enable interrupt on TX FIFO empty */
#define IER_TXEMPTY 0x02 /* Enable interrupt on TX completely empty */
#define IER_RET 0x01 /* Enable interrupt on RX Exc. Timeout */
/* Channel Option Register 1 (R/W) */
#define COR1_ODDP 0x80 /* Odd Parity */
#define COR1_PARMODE 0x60 /* Parity Mode mask */
#define COR1_NOPAR 0x00 /* No Parity */
#define COR1_FORCEPAR 0x20 /* Force Parity */
#define COR1_NORMPAR 0x40 /* Normal Parity */
#define COR1_IGNORE 0x10 /* Ignore Parity on RX */
#define COR1_STOPBITS 0x0c /* Number of Stop Bits */
#define COR1_1SB 0x00 /* 1 Stop Bit */
#define COR1_15SB 0x04 /* 1.5 Stop Bits */
#define COR1_2SB 0x08 /* 2 Stop Bits */
#define COR1_CHARLEN 0x03 /* Character Length */
#define COR1_5BITS 0x00 /* 5 bits */
#define COR1_6BITS 0x01 /* 6 bits */
#define COR1_7BITS 0x02 /* 7 bits */
#define COR1_8BITS 0x03 /* 8 bits */
/* Channel Option Register 2 (R/W) */
#define COR2_IXM 0x80 /* Implied XON mode */
#define COR2_TXIBE 0x40 /* Enable In-Band (XON/XOFF) Flow Control */
#define COR2_ETC 0x20 /* Embedded Tx Commands Enable */
#define COR2_LLM 0x10 /* Local Loopback Mode */
#define COR2_RLM 0x08 /* Remote Loopback Mode */
#define COR2_RTSAO 0x04 /* RTS Automatic Output Enable */
#define COR2_CTSAE 0x02 /* CTS Automatic Enable */
#define COR2_DSRAE 0x01 /* DSR Automatic Enable */
/* Channel Option Register 3 (R/W) */
#define COR3_XONCH 0x80 /* XON is a pair of characters (1 & 3) */
#define COR3_XOFFCH 0x40 /* XOFF is a pair of characters (2 & 4) */
#define COR3_FCT 0x20 /* Flow-Control Transparency Mode */
#define COR3_SCDE 0x10 /* Special Character Detection Enable */
#define COR3_RXTH 0x0f /* RX FIFO Threshold value (1-8) */
/* Channel Control Status Register (R/O) */
#define CCSR_RXEN 0x80 /* Receiver Enabled */
#define CCSR_RXFLOFF 0x40 /* Receive Flow Off (XOFF was sent) */
#define CCSR_RXFLON 0x20 /* Receive Flow On (XON was sent) */
#define CCSR_TXEN 0x08 /* Transmitter Enabled */
#define CCSR_TXFLOFF 0x04 /* Transmit Flow Off (got XOFF) */
#define CCSR_TXFLON 0x02 /* Transmit Flow On (got XON) */
/* Modem Change Option Register 1 (R/W) */
#define MCOR1_DSRZD 0x80 /* Detect 0->1 transition of DSR */
#define MCOR1_CDZD 0x40 /* Detect 0->1 transition of CD */
#define MCOR1_CTSZD 0x20 /* Detect 0->1 transition of CTS */
#define MCOR1_DTRTH 0x0f /* Auto DTR flow control Threshold (1-8) */
#define MCOR1_NODTRFC 0x0 /* Automatic DTR flow control disabled */
/* Modem Change Option Register 2 (R/W) */
#define MCOR2_DSROD 0x80 /* Detect 1->0 transition of DSR */
#define MCOR2_CDOD 0x40 /* Detect 1->0 transition of CD */
#define MCOR2_CTSOD 0x20 /* Detect 1->0 transition of CTS */
/* Modem Change Register (R/W) */
#define MCR_DSRCHG 0x80 /* DSR Changed */
#define MCR_CDCHG 0x40 /* CD Changed */
#define MCR_CTSCHG 0x20 /* CTS Changed */
/* Modem Signal Value Register (R/W) */
#define MSVR_DSR 0x80 /* Current state of DSR input */
#define MSVR_CD 0x40 /* Current state of CD input */
#define MSVR_CTS 0x20 /* Current state of CTS input */
#define MSVR_DTR 0x02 /* Current state of DTR output */
#define MSVR_RTS 0x01 /* Current state of RTS output */
/* Escape characters */
#define CD186x_C_ESC 0x00 /* Escape character */
#define CD186x_C_SBRK 0x81 /* Start sending BREAK */
#define CD186x_C_DELAY 0x82 /* Delay output */
#define CD186x_C_EBRK 0x83 /* Stop sending BREAK */
#define SRSR_RREQint 0x10 /* This chip wants "rec" serviced */
#define SRSR_TREQint 0x04 /* This chip wants "transmit" serviced */
#define SRSR_MREQint 0x01 /* This chip wants "mdm change" serviced */
#define SRCR_PKGTYPE 0x80
#define SRCR_REGACKEN 0x40
#define SRCR_DAISYEN 0x20
#define SRCR_GLOBPRI 0x10
#define SRCR_UNFAIR 0x08
#define SRCR_AUTOPRI 0x02
#define SRCR_PRISEL 0x01
|
