path: root/include/asm-ia64/sal.h

#ifndef _ASM_IA64_SAL_H
#define _ASM_IA64_SAL_H

/*
 * System Abstraction Layer definitions.
 *
 * This is based on version 2.5 of the manual "IA-64 System
 * Abstraction Layer".
 *
 * Copyright (C) 1998, 1999 Hewlett-Packard Co
 * Copyright (C) 1998, 1999 David Mosberger-Tang <davidm@hpl.hp.com>
 * Copyright (C) 1999 Srinivasa Prasad Thirumalachar <sprasad@sprasad.engr.sgi.com>
 *
 * 99/09/29 davidm	Updated for SAL 2.6.
 * 00/03/29 cfleck      Updated SAL Error Logging info for processor (SAL 2.6) 
 *                      (plus examples of platform error info structures from smariset @ Intel)
 */

#include <linux/config.h>

#include <asm/pal.h>
#include <asm/system.h>

extern spinlock_t sal_lock;

#define __SAL_CALL(result,args...)	result = (*ia64_sal)(args)

#ifdef CONFIG_SMP
# define SAL_CALL(result,args...) do {		\
	  spin_lock(&sal_lock);			\
	  __SAL_CALL(result,args);		\
	  spin_unlock(&sal_lock);		\
} while (0)
#else
# define SAL_CALL(result,args...)	__SAL_CALL(result,args)
#endif

#define SAL_SET_VECTORS			0x01000000
#define SAL_GET_STATE_INFO		0x01000001
#define SAL_GET_STATE_INFO_SIZE		0x01000002
#define SAL_CLEAR_STATE_INFO		0x01000003
#define SAL_MC_RENDEZ			0x01000004
#define SAL_MC_SET_PARAMS		0x01000005
#define SAL_REGISTER_PHYSICAL_ADDR	0x01000006

#define SAL_CACHE_FLUSH			0x01000008
#define SAL_CACHE_INIT			0x01000009
#define SAL_PCI_CONFIG_READ		0x01000010
#define SAL_PCI_CONFIG_WRITE		0x01000011
#define SAL_FREQ_BASE			0x01000012

#define SAL_UPDATE_PAL			0x01000020

struct ia64_sal_retval {
	/*
	 * A zero status value indicates call completed without error.
	 * A negative status value indicates reason of call failure.
	 * A positive status value indicates success but an
	 * informational value should be printed (e.g., "reboot for
	 * change to take effect").
	 */
	s64 	status;
	u64 	v0;
	u64 	v1;
	u64 	v2;
};

typedef struct ia64_sal_retval (*ia64_sal_handler) (u64, ...);

enum {
	SAL_FREQ_BASE_PLATFORM = 0,
	SAL_FREQ_BASE_INTERVAL_TIMER = 1,
	SAL_FREQ_BASE_REALTIME_CLOCK = 2
};

/*
 * The SAL system table is followed by a variable number of variable
 * length descriptors.  The structure of these descriptors follows
 * below.
 */
struct ia64_sal_systab {
	char signature[4];	/* should be "SST_" */
	int size;		/* size of this table in bytes */
	unsigned char sal_rev_minor;
	unsigned char sal_rev_major;
	unsigned short entry_count;	/* # of entries in variable portion */
	unsigned char checksum;
	char ia32_bios_present;
	unsigned short reserved1;
	char oem_id[32];	/* ASCII NUL terminated OEM id
				   (terminating NUL is missing if
				   string is exactly 32 bytes long). */
	char product_id[32];	/* ASCII product id  */
	char reserved2[16];
};

enum SAL_Systab_Entry_Type {
	SAL_DESC_ENTRY_POINT = 0,
	SAL_DESC_MEMORY = 1,
	SAL_DESC_PLATFORM_FEATURE = 2,
	SAL_DESC_TR = 3,
	SAL_DESC_PTC = 4,
	SAL_DESC_AP_WAKEUP = 5
};

/*
 * Entry type:	Size:
 *	0	48
 *	1	32
 *	2	16
 *	3	32
 *	4	16
 *	5	16
 */
#define SAL_DESC_SIZE(type)	"\060\040\020\040\020\020"[(unsigned) type]

struct ia64_sal_desc_entry_point {
	char type;
	char reserved1[7];
	s64 pal_proc;
	s64 sal_proc;
	s64 gp;
	char reserved2[16];
};

struct ia64_sal_desc_memory {
	char type;
	char used_by_sal;	/* needs to be mapped for SAL? */
	char mem_attr;		/* current memory attribute setting */
	char access_rights;	/* access rights set up by SAL */
	char mem_attr_mask;	/* mask of supported memory attributes */
	char reserved1;
	char mem_type;		/* memory type */
	char mem_usage;		/* memory usage */
	s64 addr;		/* physical address of memory */
	unsigned int length;	/* length (multiple of 4KB pages) */
	unsigned int reserved2;
	char oem_reserved[8];
};

#define IA64_SAL_PLATFORM_FEATURE_BUS_LOCK		(1 << 0)
#define IA64_SAL_PLATFORM_FEATURE_IRQ_REDIR_HINT	(1 << 1)
#define IA64_SAL_PLATFORM_FEATURE_IPI_REDIR_HINT	(1 << 2)

struct ia64_sal_desc_platform_feature {
	char type;
	unsigned char feature_mask;
	char reserved1[14];
};

struct ia64_sal_desc_tr {
	char type;
	char tr_type;		/* 0 == instruction, 1 == data */
	char regnum;		/* translation register number */
	char reserved1[5];
	s64 addr;		/* virtual address of area covered */
	s64 page_size;		/* encoded page size */
	char reserved2[8];
};

struct ia64_sal_desc_ptc {
	char type;
	char reserved1[3];
	unsigned int num_domains;	/* # of coherence domains */
	long domain_info;	/* physical address of domain info table */
};

#define IA64_SAL_AP_EXTERNAL_INT 0

struct ia64_sal_desc_ap_wakeup {
	char type;
	char mechanism;		/* 0 == external interrupt */
	char reserved1[6];
	long vector;		/* interrupt vector in range 0x10-0xff */
};

extern ia64_sal_handler ia64_sal;

extern const char *ia64_sal_strerror (long status);
extern void ia64_sal_init (struct ia64_sal_systab *sal_systab);

/* SAL information type encodings */
enum {
	SAL_INFO_TYPE_MCA	=		0,	/* Machine check abort information */
        SAL_INFO_TYPE_INIT	=		1,	/* Init information */
        SAL_INFO_TYPE_CMC	=		2 	/* Corrected machine check information */
};

/* Sub information type encodings */
enum {
        SAL_SUB_INFO_TYPE_PROCESSOR	=	0,	/* Processor information */
        SAL_SUB_INFO_TYPE_PLATFORM	=	1	/* Platform information */
};

/* Encodings for machine check parameter types */
enum {
        SAL_MC_PARAM_RENDEZ_INT		=	1,	/* Rendezevous interrupt */
        SAL_MC_PARAM_RENDEZ_WAKEUP	=	2	/* Wakeup */
};

/* Encodings for rendezvous mechanisms */
enum {
        SAL_MC_PARAM_MECHANISM_INT	=	1,	/* Use interrupt */
        SAL_MC_PARAM_MECHANISM_MEM	=	2	/* Use memory synchronization variable*/
};

/* Encodings for vectors which can be registered by the OS with SAL */
enum {
	SAL_VECTOR_OS_MCA		=	0,
	SAL_VECTOR_OS_INIT		=	1,
	SAL_VECTOR_OS_BOOT_RENDEZ	=	2
};

/* Definition of the SAL Error Log from the SAL spec */

/* Definition of timestamp according to SAL spec for logging purposes */

typedef struct sal_log_timestamp_s {
	u8	slh_century;				/* Century (19, 20, 21, ...) */
	u8	slh_year;				/* Year (00..99) */
	u8	slh_month;				/* Month (1..12) */
	u8	slh_day;				/* Day (1..31) */
	u8	slh_reserved;					
	u8	slh_hour;				/* Hour (0..23)	*/
	u8	slh_minute;				/* Minute (0..59) */
	u8	slh_second;				/* Second (0..59) */
} sal_log_timestamp_t;


#define MAX_CACHE_ERRORS			6
#define MAX_TLB_ERRORS				6
#define MAX_BUS_ERRORS				1

typedef struct sal_log_processor_info_s {
	struct	{
		u64		slpi_psi	: 1,
				slpi_cache_check: MAX_CACHE_ERRORS,
				slpi_tlb_check	: MAX_TLB_ERRORS,
				slpi_bus_check	: MAX_BUS_ERRORS,
				slpi_reserved2	: (31 - (MAX_TLB_ERRORS + MAX_CACHE_ERRORS
							 + MAX_BUS_ERRORS)),
				slpi_minstate	: 1,
				slpi_bank1_gr	: 1,
				slpi_br		: 1,
				slpi_cr		: 1,
				slpi_ar		: 1,
				slpi_rr		: 1,
				slpi_fr		: 1,
				slpi_reserved1	: 25;
	} slpi_valid;

	pal_processor_state_info_t	slpi_processor_state_info;

	struct {
		pal_cache_check_info_t	slpi_cache_check;
		u64			slpi_target_address;
	} slpi_cache_check_info[MAX_CACHE_ERRORS];
		
	pal_tlb_check_info_t		slpi_tlb_check_info[MAX_TLB_ERRORS];

	struct {
		pal_bus_check_info_t	slpi_bus_check;
		u64			slpi_requestor_addr;	
		u64			slpi_responder_addr;	
		u64			slpi_target_addr;
	} slpi_bus_check_info[MAX_BUS_ERRORS];

	pal_min_state_area_t		slpi_min_state_area;
	u64				slpi_br[8];
	u64				slpi_cr[128];
	u64				slpi_ar[128];
	u64				slpi_rr[8];
	u64				slpi_fr[128];
} sal_log_processor_info_t;

/* platform error log structures */
typedef struct platerr_logheader {
	u64	nextlog;	/* next log offset if present */
	u64	loglength;	/* log length */
	u64	logsubtype;	/* log subtype memory/bus/component */
	u64	eseverity;	/* error severity */
} ehdr_t;

typedef struct sysmem_errlog {
	ehdr_t	lhdr;		/* header */
	u64	vflag;		/* valid bits for each field in the log */
	u64	addr;		/* memory address */
	u64	data;		/* memory data */
	u64	cmd;		/* command bus value if any */
	u64	ctrl;		/* control bus value if any */
	u64	addrsyndrome;	/* memory address ecc/parity syndrome bits */
	u64	datasyndrome;	/* data ecc/parity syndrome */
	u64	cacheinfo;	/* platform cache info as defined in pal spec. table 7-34 */
} merrlog_t;

typedef struct sysbus_errlog {
	ehdr_t	lhdr;		/* linkded list header */
	u64	vflag;		/* valid bits for each field in the log */
	u64	busnum;		/* bus number in error */
	u64	reqaddr;	/* requestor address */
	u64	resaddr;	/* responder address */
	u64	taraddr;	/* target address */
	u64	data;		/* requester r/w data */
	u64	cmd;		/* bus commands */
	u64	ctrl;		/* bus controls (be# &-0) */
	u64	addrsyndrome;	/* addr bus ecc/parity bits */
	u64	datasyndrome;	/* data bus ecc/parity bits */
	u64	cmdsyndrome;	/* command bus ecc/parity bits */
	u64	ctrlsyndrome;	/* control bus ecc/parity bits */
} berrlog_t;

/* platform error log structures */
typedef struct syserr_chdr {	/* one header per component */
	u64	busnum;		/* bus number on which the component resides */
	u64	devnum;		/* same as device select */
	u64	funcid;		/* function id of the device */
	u64	devid;		/* pci device id */
	u64	classcode;	/* pci class code for the device */
	u64	cmdreg;		/* pci command reg value */
	u64	statreg;	/* pci status reg value */
} chdr_t;

typedef struct cfginfo {
	u64	cfgaddr;
	u64	cfgval;
} cfginfo_t;

typedef struct sys_comperr {	/* per component */
	ehdr_t	lhdr;		/* linked list header */
	u64	vflag;		/* valid bits for each field in the log */
	chdr_t	scomphdr;	
	u64	numregpair;	/* number of reg addr/value pairs */
	cfginfo_t cfginfo;
} cerrlog_t;

typedef struct sel_records {
	ehdr_t	lhdr;
	u64	seldata;
} isel_t;

typedef struct plat_errlog {
	u64	      mbcsvalid;	/* valid bits for each type of log */
	merrlog_t     smemerrlog;	/* platform memory error logs */
	berrlog_t     sbuserrlog;	/* platform bus error logs */
	cerrlog_t     scomperrlog;	/* platform chipset error logs */
	isel_t	      selrecord;	/* ipmi sel record */
} platforminfo_t;

/* over all log structure (processor+platform) */

typedef union udev_specific_log {
	sal_log_processor_info_t  proclog;
	platforminfo_t		  platlog;
} devicelog_t;


#define sal_log_processor_info_psi_valid		slpi_valid.spli_psi
#define sal_log_processor_info_cache_check_valid	slpi_valid.spli_cache_check
#define sal_log_processor_info_tlb_check_valid		slpi_valid.spli_tlb_check
#define sal_log_processor_info_bus_check_valid		slpi_valid.spli_bus_check
#define sal_log_processor_info_minstate_valid		slpi_valid.spli_minstate
#define sal_log_processor_info_bank1_gr_valid		slpi_valid.slpi_bank1_gr
#define sal_log_processor_info_br_valid			slpi_valid.slpi_br
#define sal_log_processor_info_cr_valid			slpi_valid.slpi_cr
#define sal_log_processor_info_ar_valid			slpi_valid.slpi_ar
#define sal_log_processor_info_rr_valid			slpi_valid.slpi_rr
#define sal_log_processor_info_fr_valid			slpi_valid.slpi_fr

typedef struct sal_log_header_s {
	u64			slh_next_log;		/* Offset of the next log from the 
							 * beginning of  this structure.
							 */
	uint			slh_log_len;		/* Length of this error log in bytes */
	ushort			slh_log_type;		/* Type of log (0 - cpu ,1 - platform) */
	ushort			slh_log_sub_type;	/* SGI specific sub type */
	sal_log_timestamp_t	slh_log_timestamp;	/* Timestamp */
} sal_log_header_t;

/* SAL PSI log structure */
typedef struct psilog
{
	sal_log_header_t   sal_elog_header;
	devicelog_t        devlog;
} ia64_psilog_t;

/*
 * Now define a couple of inline functions for improved type checking
 * and convenience.
 */
extern inline long
ia64_sal_freq_base (unsigned long which, unsigned long *ticks_per_second,
		    unsigned long *drift_info)
{
	struct ia64_sal_retval isrv;

	SAL_CALL(isrv, SAL_FREQ_BASE, which);
	*ticks_per_second = isrv.v0;
	*drift_info = isrv.v1;
	return isrv.status;
}

/* Flush all the processor and platform level instruction and/or data caches */
extern inline s64
ia64_sal_cache_flush (u64 cache_type)
{
	struct ia64_sal_retval isrv;
	SAL_CALL(isrv, SAL_CACHE_FLUSH, cache_type);
	return isrv.status;
}


	
/* Initialize all the processor and platform level instruction and data caches */
extern inline s64
ia64_sal_cache_init (void)
{
	struct ia64_sal_retval isrv;
	SAL_CALL(isrv, SAL_CACHE_INIT);
	return isrv.status;
}

/* Clear the processor and platform information logged by SAL with respect to the 
 * machine state at the time of MCA's, INITs or CMCs 
 */
extern inline s64
ia64_sal_clear_state_info (u64 sal_info_type, u64 sal_info_sub_type)
{
	struct ia64_sal_retval isrv;
	SAL_CALL(isrv, SAL_CLEAR_STATE_INFO, sal_info_type, sal_info_sub_type);
	return isrv.status;
}


/* Get the processor and platform information logged by SAL with respect to the machine
 * state at the time of the MCAs, INITs or CMCs.
 */
extern inline u64
ia64_sal_get_state_info (u64 sal_info_type, u64 sal_info_sub_type, u64 *sal_info)
{
	struct ia64_sal_retval isrv;
	SAL_CALL(isrv, SAL_GET_STATE_INFO, sal_info_type, sal_info_sub_type, sal_info);
	if (isrv.status)
		return 0;
	return isrv.v0;
}	
/* Get the maximum size of the information logged by SAL with respect to the machine 
 * state at the time of MCAs, INITs or CMCs
 */
extern inline u64
ia64_sal_get_state_info_size (u64 sal_info_type, u64 sal_info_sub_type)
{
	struct ia64_sal_retval isrv;
	SAL_CALL(isrv, SAL_GET_STATE_INFO_SIZE, sal_info_type, sal_info_sub_type);
	if (isrv.status)
		return 0;
	return isrv.v0;
}

/* Causes the processor to go into a spin loop within SAL where SAL awaits a wakeup
 * from the monarch processor.
 */
extern inline s64
ia64_sal_mc_rendez (void)
{
	struct ia64_sal_retval isrv;
	SAL_CALL(isrv, SAL_MC_RENDEZ);
	return isrv.status;
}

/* Allow the OS to specify the interrupt number to be used by SAL to interrupt OS during
 * the machine check rendezvous sequence as well as the mechanism to wake up the 
 * non-monarch processor at the end of machine check processing.
 */
extern inline s64
ia64_sal_mc_set_params (u64 param_type, u64 i_or_m, u64 i_or_m_val, u64 timeout)
{
	struct ia64_sal_retval isrv;
	SAL_CALL(isrv, SAL_MC_SET_PARAMS, param_type, i_or_m, i_or_m_val, timeout);
	return isrv.status;
}

/* Read from PCI configuration space */
extern inline s64
ia64_sal_pci_config_read (u64 pci_config_addr, u64 size, u64 *value)
{
	struct ia64_sal_retval isrv;
#ifdef CONFIG_ITANIUM_A1_SPECIFIC
	extern spinlock_t ivr_read_lock;
	unsigned long flags;

	/*
	 * Avoid PCI configuration read/write overwrite -- A0 Interrupt loss workaround
	 */
	spin_lock_irqsave(&ivr_read_lock, flags);
#endif
	SAL_CALL(isrv, SAL_PCI_CONFIG_READ, pci_config_addr, size);
#ifdef CONFIG_ITANIUM_A1_SPECIFIC
	spin_unlock_irqrestore(&ivr_read_lock, flags);
#endif
	if (value)
		*value = isrv.v0;
	return isrv.status;
}

/* Write to PCI configuration space */
extern inline s64
ia64_sal_pci_config_write (u64 pci_config_addr, u64 size, u64 value)
{
	struct ia64_sal_retval isrv;
#ifdef CONFIG_ITANIUM_A1_SPECIFIC
	extern spinlock_t ivr_read_lock;
	unsigned long flags;

	/*
	 * Avoid PCI configuration read/write overwrite -- A0 Interrupt loss workaround
	 */
	spin_lock_irqsave(&ivr_read_lock, flags);
#endif
	SAL_CALL(isrv, SAL_PCI_CONFIG_WRITE, pci_config_addr, size, value);
#ifdef CONFIG_ITANIUM_A1_SPECIFIC
	spin_unlock_irqrestore(&ivr_read_lock, flags);
#endif
	return isrv.status;
}

/*
 * Register physical addresses of locations needed by SAL when SAL
 * procedures are invoked in virtual mode.
 */
extern inline s64
ia64_sal_register_physical_addr (u64 phys_entry, u64 phys_addr)
{
	struct ia64_sal_retval isrv;
	SAL_CALL(isrv, SAL_REGISTER_PHYSICAL_ADDR, phys_entry, phys_addr);
	return isrv.status;
}

/* Register software dependent code locations within SAL. These locations are handlers
 * or entry points where SAL will pass control for the specified event. These event
 * handlers are for the bott rendezvous, MCAs and INIT scenarios.
 */
extern inline s64
ia64_sal_set_vectors (u64 vector_type,
		      u64 handler_addr1, u64 gp1, u64 handler_len1,
		      u64 handler_addr2, u64 gp2, u64 handler_len2)
{
	struct ia64_sal_retval isrv;
	SAL_CALL(isrv, SAL_SET_VECTORS, vector_type,
			handler_addr1, gp1, handler_len1,
			handler_addr2, gp2, handler_len2);			

	return isrv.status;
}		
/* Update the contents of PAL block in the non-volatile storage device */
extern inline s64
ia64_sal_update_pal (u64 param_buf, u64 scratch_buf, u64 scratch_buf_size,
		     u64 *error_code, u64 *scratch_buf_size_needed)
{
	struct ia64_sal_retval isrv;
	SAL_CALL(isrv, SAL_UPDATE_PAL, param_buf, scratch_buf, scratch_buf_size);
	if (error_code)
		*error_code = isrv.v0;
	if (scratch_buf_size_needed)
		*scratch_buf_size_needed = isrv.v1;
	return isrv.status;
}

#endif /* _ASM_IA64_PAL_H */