View source for Axattach

This page documents the obsolete '''axattach''' command.  Axcommand has been renamed to [[kissattach]] already for [[ax25-utils]] 2.0.12c which was released about [[1996]]-12-25.

== NAME ==
: ''axattach - Attach a KISS interface

== SYNOPSIS ==
: axattach [-i inetaddr] [-l] [-m mtu] [-v] tty port

== DESCRIPTION ==
: Attach  a  SLIP  interface  in KISS mode to what is normally a tty line connected to a TNC in KISS mode. This program will turn itself into a background  process.  To  down an interface send its axattach process a SIGKILL.

: Axattach takes many of the parameters for the port from the  axports(5) file.  If  the speed parameter in the file is not equal to zero then it is used for the serial port speed, a zero value means that no speed  is set.  The paclen parameter is used for the device mtu unless overridde by a value on the command line.

:The tty argument will typically be that of a serial port  with  a  KISS TNC attached, although it could be a psuedo tty or a KISS port emulator such as an SCC card. The port arguments is the name of a port as  given in the axports(5) file.

== OPTIONS ==
:{|
|      -i inetaddr     || Set the internet address of the interface. This address may either be a dotted decimal address or a host name.
|-
|      -l              || Log messages to the system log, the default is not to.
|-
|       -m mtu         || Sets the mtu of the interface. If  this  value  is  not given then the value is taken from the paclen parameter in axports.
|-
|       -v             || Display the version.
|}

== SEE ALSO ==
: kill(1), stty(1), ax25(4), axparms(4), axports(5), ifconfig(8).

== AUTHOR ==
: Alan Cox GW4PTS <alan@cymru.net>
: Jonathan Naylor G4KLX <jsn@cs.nott.ac.uk>