Apply program name transformations also to man page content.

For now these options are just honored for the call.1 and listen.1 man
pages because these days these two programs generally get renamed to
avoid naming conflicts with other programs.

2 files changed, 30 insertions, 13 deletions

diff --git a/call/Makefile.am b/call/Makefile.am
index 9668863..70df548 100644
--- a/call/Makefile.am
+++ b/call/Makefile.am
@@ -8,9 +8,26 @@ installconf:
 bin_PROGRAMS = call
 
 man_MANS = call.1
+CLEANFILES = call.1 call.1.tmp
 
 EXTRA_DIST = $(man_MANS)
 
+call.1 : call.man
+	name_call=$$(echo call | sed -e '$(transform)')			\
+	name_Call=$$(echo $$name_call | sed -r 's@^(.)@\U\1\E@') &&	\
+	name_CALL=$$(echo $$name_call | sed -r 's@^(.*)@\U\1\E@') &&	\
+	name_listen=$$(echo listen | sed -e '$(transform)')		\
+	name_Listen=$$(echo $$name_listen | sed -r 's@^(.)@\U\1\E@') &&	\
+	name_LISTEN=$$(echo $$name_listen | sed -r 's@^(.*)@\U\1\E@') &&\
+	sed -e "s/@@@call@@@/$$name_call/g"				\
+	    -e "s/@@@Call@@@/$$name_Call/g"				\
+	    -e "s/@@@CALL@@@/$$name_CALL/g"				\
+	    -e "s/@@@listen@@@/$$name_listen/g"				\
+	    -e "s/@@@Listen@@@/$$name_Listen/g"				\
+	    -e "s/@@@LISTEN@@@/$$name_LISTEN/g"				\
+	    call.man > call.1.tmp &&					\
+	mv call.1.tmp call.1;
+
 call_LDADD = $(NCURSES_LIB) $(AX25_LIB)
 
 call_SOURCES =		\
diff --git a/call/call.1 b/call/call.man
index e4236b8..85c291b 100644
--- a/call/call.1
+++ b/call/call.man
@@ -1,22 +1,22 @@
-.TH CALL 1 "27 August 1996" Linux "Linux Programmer's Manual"
+.TH @@@CALL@@@ 1 "27 August 1996" Linux "Linux Programmer's Manual"
 .SH NAME
-call \- make an AX.25, NET/ROM or Rose connection.
+@@@call@@@ \- make an AX.25, NET/ROM or Rose connection.
 .SH SYNOPSIS
 For AX.25
 .br
-.B call [-b l|e] [-d] [-h] [-m s|e] [-p paclen] [-s mycall] [-r] [-t] [-T timeout] [-v] [-w window] [-W] port callsign [[via] digipeaters.....]
+.B @@@call@@@ [-b l|e] [-d] [-h] [-m s|e] [-p paclen] [-s mycall] [-r] [-t] [-T timeout] [-v] [-w window] [-W] port callsign [[via] digipeaters.....]
 .sp 1
 For NET/ROM
 .br
-.B call [-d] [-h] [-p paclen] [-r] [-t] [-v] port callsign
+.B @@@call@@@ [-d] [-h] [-p paclen] [-r] [-t] [-v] port callsign
 .sp 1
 For Rose
 .br
-.B call [-d] [-h] [-r] [-t] [-v] port callsign address [[via] digipeater]
+.B @@@call@@@ [-d] [-h] [-r] [-t] [-v] port callsign address [[via] digipeater]
 .br
 .SH DESCRIPTION
 .LP
-.B Call
+.B @@@Call@@@
 is the general purpose AX.25, NET/ROM and Rose connection program. As is normal
 in AX.25 it runs entirely in line mode. All CR/LF translation is done
 transparently. The program provides ASCII, YAPP, YAPP-C and 7+ file
@@ -25,12 +25,12 @@ the program will quietly ignore them if given in NET/ROM mode or in Rose
 mode.
 .LP
 This version of
-.B call
+.B @@@call@@@
 incorporates many changes that include a much improved user interface. The
 port name is mandatory and is the name of the port which the connection will
 be made on. The port name may be either an AX.25, a NET/ROM port or a Rose
 port,
-.B call
+.B @@@call@@@
 will determine which automatically.
 .LP
 When using NET/ROM the use of digipeaters is meaningless and is not
@@ -69,14 +69,14 @@ for extended (modulus 128) AX.25 operation.
 Specify a specific maximum amount of data to be sent in each AX.25 packet. 
 .TP 10
 .BI "\-s mycall"
-Connect using the specified source call (you may need to be root).
+Connect using the specified source @@@call@@@ (you may need to be root).
 .TP 10
 .BI \-R
 Disable all remote commands like autobin (#BIN#), 7plus downloads, //echo, etc.
 This is useful for scripting where you just don't like the remote site to trigger uncaught conditions here.
 .TP 10
 .BI \-S
-Be silent. Useful for using call in shellscripts (together with option \-r) in order to be really transparent.
+Be silent. Useful for using @@@call@@@ in shellscripts (together with option \-r) in order to be really transparent.
 .TP 10
 .BI "\-T timeout"
 Set idle timeout seconds after a connection will be closed automaticaly when there's no data being transferred (in- and outbound). If timeout is set to 3600, the connection will close after 1h inactivity. A value of 0.5 is 500ms.
@@ -94,9 +94,9 @@ Display the version.
 Specify a specific AX.25 window for this connection. Only valid in AX.25 mode.
 .TP 10
 .BI "\-W"
-Wait for remote disconnect even if stdin is closed. Normaly, "echo q | call ax0 db0fhn" closes immediately after "echo q" terminates; thus we never see the greeting from db0fhn. With the -W option, call waits until the ax25-connection is disconnected (i.e. db0fhn disconnects after "q" command). Very useful for scripting. You might like to combine it with the -T option.
+Wait for remote disconnect even if stdin is closed. Normaly, "echo q | @@@call@@@ ax0 db0fhn" closes immediately after "echo q" terminates; thus we never see the greeting from db0fhn. With the -W option, @@@call@@@ waits until the ax25-connection is disconnected (i.e. db0fhn disconnects after "q" command). Very useful for scripting. You might like to combine it with the -T option.
 .LP
-The call program interprets lines beginning with a '~' specially.
+The @@@call@@@ program interprets lines beginning with a '~' specially.
 The following '~' escapes are available.
 .TP 16
 .BI ~?
@@ -169,7 +169,7 @@ however '8 bit clean'.
 /etc/ax25/rsports
 .fi
 .SH "SEE ALSO"
-.BR listen (1),
+.BR @@@listen@@@ (1),
 .BR mheard (1),
 .BR ax25 (4),
 .BR netrom (4),