summaryrefslogtreecommitdiffstats
path: root/ax25ipd/README.ax25ipd
blob: 3ae9af19de0b16d9344d886b967c49b20727d515 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694

**
** This file is a cobbling together of the various notes on ax25ipd.
**

			     ax25ipd
			     =======

This README files pertains to version 1.0.2 of ax25ipd.
(this document is still incomplete -- the UDP features lack examples)

Overview
--------

   RFC1226 describes a method of using TCP/IP based networks to transport
AX.25 frames.  The ax25ipd utility uses this technique to transfer AX.25
frames in and out of TCP/IP environments.

   The interface to the AX.25 world is via KISS, with ax25ipd emulating
either a standard KISS TNC or operating as a digipeater.  AX.25 frames
arriving on the KISS interface are routed to the IP interface and sent
to the appropriate IP host system.  Incoming frames from the IP interface
are filtered and sent out the KISS interface.  The operator controls the
mode (tnc or digipeater), the routing (callsign to ip host mapping), and
a few sundry controls via a configuration file, read at startup.

   ax25ipd is the Linux incarnation of ax25ip by Mike Westerhof, and is
not intended to support any OS other than Linux. Although getting it to
run on BSD should not present too many issues, there has been no attempt
to retain BSD(Sun) operability since it was updated in an environment
where there was no access to BSD.

   ax25ipd requires a serial port, and uses a raw socket to gain access
to the IP layer of the host's TCP/IP implementation (this requires that
ax25ipd be started by root).  ax25ipd also supports using a standard UDP
socket in place of the raw socket, although this does not adhere to
RFC1226.


Modes and Routing
-----------------

   There are two interfaces into and out of ax25ipd.  The KISS interface
is a standard serial port, running speeds up to 38400 baud.  The IP
interface reads and writes packets to an IP network in accordance with
the specifications in RFC1226.  Several factors determine how AX.25
frames route within ax25ipd and through the IP network, although some
basic rules always apply:

   A frame will never leave ax25ipd on the same interface it came in on.
This fundamental rule eliminates much complexity and much confusion on
how to set up ax25ipd.

   A frame will never be sent to more than one IP host.  Using an IP
network as a broadcast media is probably not a good idea, especially
across the Internet!

  Most other routing factors involve user configuration, and depend
heavily on the mode of operation.

  In tnc mode, ax25ipd emulates a KISS tnc, and behaves as one would
expect.  The next destination callsign (either the destination or the
next digipeater in line) is extracted from frames arriving on the KISS
interface, and looked up in a routing table (built by the operator in the
configuration file).  The routing table provides the IP address to which
this frame should be sent.  The standard CRC is computed, tacked onto the
frame, and the result is sent off to the target system.  Frames arriving
from the IP interface have the CRC checked and removed, and are forwarded
to the KISS interface.

   Digi mode is a little more complicated.  In this mode, ax25ipd is
assigned a callsign, and acts as a digipeater.  If a frame arriving on
the KISS interface has ax25ipd's callsign specified as the next digipeater,
ax25ipd will mark the frame as digipeated by it, look up the next callsign
in the routing table, compute and append the CRC, and send the frame to
the specified IP host.  Frames arriving on the IP interface will be
handled in a similar fashion, but note that in no cases will the frame be
sent out the same port it arrived in on.


Configuration
-------------

   A single configuration file is used to tailor ax25ipd.  The file is
usually named "ax25ipd.cfg" and should be located in the same directory
ax25ipd is executed from.  An example is probably the best way to become
familiar with configuring ax25ipd.

# Sample Configuration file for ax25ipd
mode digi
socket ip
device /dev/ttya
speed 9600
mycall KA9WSB-7
myalias ILSUN
beacon every 540
btext ax25ipd -- digi ka9wsb-7 -- Experimental IP encapsulator
loglevel 2
route W1AW-13 handbook.arrl.com
route WZ9ZZZ last.one.edu
param 1 20

The mode command selects the behavior of ax25ipd.  The device line specifies
the tty device to use, and the speed line selects the baud rate.  Baud
rates up to 34800 can be used, but 9600 is probably the fastest safe
speed for serial cables of any distance (remember, KISS has no error
detection).  The mycall command is required only if you are in digi mode.
The loglevel command selects the amount of verbosity you want, ranging from
0 (no output) to 4 (streams of data).  The route command adds entries to
a static routing table, currently 128 entries deep.  In the example, AX.25
frames destined for W1AW-13 are forwarded to handbook.arrl.com, frames for
WZ9ZZZ are sent to last.one.edu, and all others go nowhere.  Specifying the
word "default" in place of a callsign sets up a default route, used when
the destination callsign cannot be found in the routing table.  Finally,
in digi mode, the device on the other end of the KISS interface is probably
a TNC.  The param command allows you to set the KISS parameters (txdelay,
slottime, etc).  As many param commands as required can be specified.

The myalias command allows you to specify an alias for this digipeater.
If you do this, you should probably use the beacon command to ensure
that you ID regularly.  The beacon every 540 command forces an ID message
to be sent out the KISS interface every 9 minutes.  Specifying beacon
after 540 will send the ID packet only if the channel has been idle for
9 minutes.

Sending a hang-up signal to the ax25ipd process will cause it to reread
the configuration file and re-initialize itself  (kill -HUP <ax25ipd-pid>).


Sample Configuration - NOS-to-NOS
---------------------------------

   This example shows how to connect a pair of NOS-based PCs together
using ax25ipd to carry AX.25 traffic.


    KA9WSB-3         one.two.com
  .----------.      .----------.
  |          |      |          |
  |          | KISS | UNIX     |   |
  |  NOS     |------|  host    |---|
  |   on     |      |          |   |  TCP/IP network
  |    PC    |      |          |   |
  `----------'      `----------'   |
				   |
			     (vast distance)
				   |
				   |   fish.sea.com        W1AW-5
				   |   .----------.      .----------.
				   |   |          |      |          |
				   |   | UNIX     | KISS |          |
				   |---|  host    |------|  NOS     |
				   |   |          | 1200 |   on     |
				       |          | baud |    PC    |
				       `----------'      `----------'


     Config file:                        Config file:
      mode tnc                            mode tnc
      device /dev/ttya                    device /dev/ttya
      speed 9600                          speed 1200
      route W1AW-5 fish.sea.com           route KA9WSB-3 one.two.com

Using this setup, a user could run AX.25 connections between the two PCs.
Note that while NOS can digipeat, NOS will not automatically allow users
near W1AW-5 to digipeat through it to reach KA9WSB-3 (i.e. the command
"C KA9WSB-3 V W1AW-5" will not have the desired result).  This may or may
not be a problem.


Sample Configuration - digi-to-digi
-----------------------------------

   This example shows how to configure ax25ipd as a pair of digipeaters.


		      (KA9WSB-3)
		     one.two.com
  .----------.      .----------.
  |          |      |          |
  | Standard | KISS | UNIX     |   |
  |   KISS   |------|  host    |---|
  |   TNC    |      |          |   |  TCP/IP network
  | & radio  |      |          |   |
  `----------'      `----------'   |
				   |
			     (vast distance)
				   |
				   |    (W1AW-5)
				   |   fish.sea.com        W1AW-5
				   |   .----------.      .----------.
				   |   |          |      |          |
				   |   | UNIX     | KISS | Standard |
				   |---|  host    |------|   KISS   |
				   |   |          | 9600 |   TNC    |
				       |          | baud | & radio  |
				       `----------'      `----------'


     Config file:                        Config file:
      mode digi                           mode digi
      mycall KA9WSB-3                     mycall W1AW-5
      device /dev/ttya                    device /dev/ttya
      speed 9600                          speed 9600
      route W1AW-5 fish.sea.com           route KA9WSB-3 one.two.com
      param 1 20                          param 1 33

In this setup, the UNIX hosts are "on the air".  No PCs or additional
hardware are required.  A user near W1AW-5 could read a user near KA9WSB-3
simply by providing the digipeater path: "c KA9WSB V W1AW-5 KA9WSB-3"
would work just fine.


---------

We have added dual port capibility in DIGI MODE ONLY to allow us to use it
with a Dataengine. Very little needed changing, but we did not document the
changes.  If you really need to know, diff the package against the original,
which was/is at sunsite.unc.edu.  To specify the second port, do something
like this...

#to use the second port, we need to be in digi mode
mode digi
#
#port 0 on my tnc goes to vhf
mycall ve3djf-12
myalias vhfdjf
#
#port 1 on my tnc goes to uhf.
#The callsign and alias must be different for this to work right...
mycall2 ve3djf-13
myalias2 uhfdjf
#

Everything else is the same.  Note that if you leave out the mycall2 and
myalias2 defines, it works just like the original in single port mode.  For
receiving on the KISS (dual) port, packets are checked against both callsigns
and aliases.  Whoever is on the other end of the AXIP link can find out what
port it came from by looking at the who it got digi'd through, although
I can't think of any reason to do that... For transmiting, you go out the
port with the callsign matching the digi address.  For example, to go out
port 0 in the above example, digi through ve3djf-12 or vhfdjf.
To go out port 1, digi through ve3djf-13 or uhfdjf.

Deficencies:  If you specify the same callsign on both
ports, no error is generated, but the way the logic in the code works you
always go out the upper port (port 1), not port 0.  In TNC mode, there is
really no way to specify which port to transmit on that I can think of, so
there is no multiplexing there.  Everything goes out port 0 in TNC mode
still.  Lastly, none of the dump routines know anything about ports on the
KISS interface, so they look the same, with both ports lumped into one.

Let us know if you like this hack, BTW.  In retrospect, we should have
written a KISSPlexor (tm:-) HIHI.  I think we will do that next.


73! de Jeff / VE3DJF
Jeff@lnx_rpi.ee.ryerson.ca
VE3DJF@bbs.VE3RPI.ampr.org


AXIP (IP encapsulation of AX.25 frames) daemon by Michael Westerhof.








Network Working Group                                          B. Kantor
Request for Comments: 1226                      Univ. of Calif San Diego
								May 1991


	    Internet Protocol Encapsulation of AX.25 Frames

Status of this Memo

   This memo describes a method for the encapsulation of AX.25 (the
   Amateur Packet-Radio Link-Layer Protocol) frames within IP packets.
   This technique is an Experimental Protocol for the Internet
   community.  Discussion and suggestions for improvement are requested.
   Please refer to the current edition of the "IAB Official Protocol
   Standards" for the standardization state and status of this protocol.
   Distribution of this memo is unlimited.

The AX.25 Amateur Packet-Radio Link-Layer Protocol

   The AX.25 Amateur Packet-Radio Link-Layer Protocol is described in
   the publication by that name [1], incorporated here by reference.

   Each AX.25 packet ("frame") is encapsulated in one IP datagram.
   Normally no AX.25 frame will exceed 330 octets, so fragmentation at
   the IP layer should not be necessary.  However, experiments with
   larger AX.25 frame sizes may require the use of standard IP
   fragmentation and reassembly procedures.

   When an AX.25 frame is encapsulated within an IP packet, HDLC framing
   elements (flags and zero-stuffing) are omitted, as the IP datagram
   adequately delimits the beginning and end of each AX.25 frame.  The
   16-bit CRC-CCITT frame check sequence (normally generated by the HDLC
   transmission hardware) is included.  In all other respects, AX.25
   frames are encapsulated unaltered.

   Each such IP datagram shall have a protocol number of 93.

Reference

   [1] AX.25 Amateur Packet-Radio Link-Layer Protocol Version 2.0
       October 1984.  Available from the American Radio Relay League,
       Newington CT USA 06111, and other sources.

Security Considerations

   Security issues are not discussed in this memo.





Kantor                                                          [Page 1]

RFC 1226            IP Encapsulation of AX.25 Frames            May 1991


Author's Address

   Brian Kantor
   University of California at San Diego
   Network Operations C-024
   La Jolla, CA 92093-0214

   Phone: (619) 534-6865

   EMail: brian@UCSD.EDU









































Kantor                                                          [Page 2]




/etc/ax25/ax25ipd.conf for vk5xxx


#
# ax25ipd configuration file for station floyd.vk5xxx.ampr.org
#
# Select axip transport. 'ip' is what you want for compatibility
# with most other gates ...
#
socket ip
#
# Set ax25ipd mode of operation. (digi or tnc)
#
mode tnc
#
# If you selected digi, you must define a callsign.  If you selected
# tnc mode, the callsign is currently optional, but this may change
# in the future! (2 calls if using dual port kiss)
#
#mycall vk5xxx-4
#mycall2 vk5xxx-5
#
# In digi mode, you may use an alias. (2 for dual port)
#
#myalias svwdns
#myalias2 svwdn2
#
# Send an ident every 540 seconds ...
#
beacon after 540
btext ax25ip -- tncmode rob/vk5xxx -- Experimental AXIP gateway
#
# Serial port, or pipe connected to a kissattach in my case
#
device /dev/ttyqd
#
# Set the device speed
#
speed 9600
#
# loglevel 0 - no output
# loglevel 1 - config info only
# loglevel 2 - major events and errors
# loglevel 3 - major events, errors, and AX25 frame trace
# loglevel 4 - all events
# log 0 for the moment, syslog not working yet ...
#
loglevel 0
#
# If we are in digi mode, we might have a real tnc here, so use param to
# set the tnc parameters ...
#
#param 1 20
#
# ax.25 route definition, define as many as you need (< 128?)
# format is route (call/wildcard) (ip host at destination)
#
route vk5zeu* 44.136.202.3
route vk5wsr-1 44.136.202.241
route vk5wsr-0 44.136.202.241
route vk5dj-15 44.136.202.241
route vk5ham* 44.136.202.241
#
# a default route. Careful here, all undefined traffic end's up here.
#
route default 44.136.202.241
#


another ax25ipd.cfg


# Sample ax25ipd configuration file
#
# First select the mode of operation. (digi or tnc)
#
socket ip
#
mode tnc
#
# If you selected digi, you must define a callsign.  If you selected
# tnc mode, the callsign is currently optional, but this may change
# in the future!
#
mycall ve3rpi-14
mycall2 ve3rpi-15
#
# In digi mode, you may use an alias.
#
myalias ryeha1
myalias2 ryeha2
#
# ID every 10 minutes...
#
beacon after 540
btext ax25ipd -- digi jeff -- Experimental IP gateway
#
# The tnc or host system must be connected to a serial port.
#
device /dev/ttyS1
#
# The line speed is set here
#
speed 9600
#
# loglevel 0 - no output
# loglevel 1 - config info only
# loglevel 2 - major events and errors
# loglevel 3 - major events, errors, and AX25 frame trace
# loglevel 4 - all events
#
loglevel 4
#
# If digi mode, we probably have a tnc on the other end of the serial
# port.  Use the param command to set the KISS parameters (like txdelay!)
# You can specify as many as you need.
#
param 1 20
#
# Define some routes.  This example routes all traffic for callsign ka9wsb-7
# to a host named waveguide.central.sun.com.  You can define as many as
# required.
#
route ve3rpi bbs.ve3rpi.ampr.org
route ve3rpi-2 ryeham.ee.ryerson.ca
route qst ryeham.ee.ryerson.ca
#
# A catch-all is provided: this line sends all calls not specifically
# noted in the routing tables to sunbird.central.sun.com.  Use this feature
# with great care -- the host on the other end may not appreciate all the
# traffic!
#
#route default sunbird.central.sun.com
#



ax25ipd.cfg.n8qlb


# Sample ax25ipd configuration file (0.4.2 version)
#
# First select the mode of operation. (digi or tnc)
#
mode tnc
#
# The normal mode of operation is using IP datagrams:
#
socket ip
#
# But you can also use UDP datagrams.  If you don't specify a port number
# to use, the default will be chosen (usually a Good Idea).
#
socket udp
#
# If you selected digi, you must define a callsign.  If you selected
# tnc mode, the callsign is currently optional, but this may change
# in the future!
#
mycall N8QLB-1
#
# In digi mode, you may use an alias.
#
myalias LINUXX
#
# Note that if you use an alias, in order to guarantee you will properly
# ID every 10 minutes, you MUST specify "beacon every 540" (or so --
# don't beacon too often, but setting it to 600 might end up squeaking
# past the 10 minute time if the channel is busy)
# A possible future enhancement may allow an ID only if necessary (i.e.
# a packet has been digipeated using the "myalias" id)...
#
beacon every 540
btext ax25ipd -- digi n8qlb -- Experimental IP gateway
#
# The tnc or host system must be connected to a serial port.
#
device /dev/tnc
#
# The line speed is set here
#
speed 9600
#
# loglevel 0 - no output
# loglevel 1 - config info only
# loglevel 2 - major events and errors
# loglevel 3 - major events, errors, and AX25 frame trace
# loglevel 4 - all events
#
loglevel 0
#
# If digi mode, we probably have a tnc on the other end of the serial
# port.  Use the param command to set the KISS parameters (like txdelay!)
# You can specify as many as you need.
#
param 1 20
#
# Define some routes.  This example routes all traffic for callsign ka9wsb-6
# to a host named sales.central.sun.com, using udp instead of raw ip.  The
# next line sends all traffic for e3abc-5 to a host at ip address 11.22.33.44,
# sending the datagrams to udp port 12345.  The last example sends frames
# addressed to y4xyz-9 and sends them to flim.flam.com, using the ip
# encapsulation.  You can define as many as required.
#
#route n8qlb linux.n8qlb
#route e3abc-5 11.22.33.44 udp 12345
#route y4xyz-9 flim.flam.com
#
# A catch-all is provided: this line sends all calls not specifically
# noted in the routing tables to fred.central.sun.com.  Use this feature
# with great care -- the host on the other end may not appreciate all the
# traffic!
#
route default linux.n8qlb
#
ax25ipd.cfg.stock
# Sample ax25ipd configuration file
#
# First select the mode of operation. (digi or tnc)
#
mode digi
#
# If you selected digi, you must define a callsign.  If you selected
# tnc mode, the callsign is currently optional, but this may change
# in the future!
#
mycall ka9wsb-7
#
# In digi mode, you may use an alias.
#
myalias sunord
#
# ID every 10 minutes...
#
beacon after 540
btext ax25ipd -- digi ka9wsb-7 -- Experimental IP gateway
#
# The tnc or host system must be connected to a serial port.
#
device /dev/ttyb
#
# The line speed is set here
#
speed 9600
#
# loglevel 0 - no output
# loglevel 1 - config info only
# loglevel 2 - major events and errors
# loglevel 3 - major events, errors, and AX25 frame trace
# loglevel 4 - all events
#
loglevel 3
#
# If digi mode, we probably have a tnc on the other end of the serial
# port.  Use the param command to set the KISS parameters (like txdelay!)
# You can specify as many as you need.
#
param 1 20
#
# Define some routes.  This example routes all traffic for callsign ka9wsb-7
# to a host named waveguide.central.sun.com.  You can define as many as
# required.
#
route ka9wsb-6 salespuke.central.sun.com
#
# A catch-all is provided: this line sends all calls not specifically
# noted in the routing tables to sunbird.central.sun.com.  Use this feature
# with great care -- the host on the other end may not appreciate all the
# traffic!
#
#route default sunbird.central.sun.com
#




Outstanding Issues
------------------

   There are many outstanding issues with this software.  A partial list,
in no particular order, appears below.

- Portability!  io.c currently uses BSD-style select but sys5-style termios!

- ICMP messages relating to ax25ipd are ignored.

- Performance of the routing lookups is probably horrid.  Also, a static
  table is a crock.  Feedback from evaluations and test sites may help
  determine how this should work.

- Statistics should be added.

- A few more comments in the code would be nice.


Comments, Criticism, Enhancements, Problems, Bugs
-------------------------------------------------

   You can reach the person responsible for ax25ipd at any of the following
   addresses:

   Mike.Westerhof@Central.Sun.COM

   KA9WSB@WB9YAE

   Mike Westerhof, 17 N Main St, Mt Prospect, IL 60056

-------------------------------------------------------------------------
Copyright 1991, Michael Westerhof, Sun Microsystems, Inc.
This software may be freely used, distributed, or modified, providing
this footer is not removed.
-------------------------------------------------------------------------