diff options
Diffstat (limited to 'yamdrv/README.yamdrv')
-rw-r--r-- | yamdrv/README.yamdrv | 54 |
1 files changed, 27 insertions, 27 deletions
diff --git a/yamdrv/README.yamdrv b/yamdrv/README.yamdrv index f76ac10..ada27f2 100644 --- a/yamdrv/README.yamdrv +++ b/yamdrv/README.yamdrv @@ -11,23 +11,23 @@ yam3 default to COM4 0x3e8 irq3 ---------- Added : bitrate/baudrate configuration. -Added : mcs file may be loaded from yamcfg. - One mcs file is affected to each bitrate. - +Added : mcs file may be loaded from yamcfg. + One mcs file is affected to each bitrate. + mcs data for 1200 and 9600 bds are preloaded in the driver but may be changed by yamcfg. options of yamcfg : - [iobase <iobase>] - [irq <irq>] - [bitrate <bitrate>] + [iobase <iobase>] + [irq <irq>] + [bitrate <bitrate>] [baudrate <baudrate>] - [duplex <mode>] - [hold <delay>] + [duplex <mode>] + [hold <delay>] [txdelay <txdelay>] - [txtail <txtail>] - [slottime <slottime>] + [txtail <txtail>] + [slottime <slottime>] [persist <persistence>] [load <bitrate> <filename.mcs>] @@ -52,26 +52,26 @@ The program yamcfg get or set the parameters of the yam driver yamcfg -h gives a minimum help Example setup of yam0 for 1 serial port (com2) : - + file /etc/ax25/axports : - port0 F1OAT-9 9600 256 2 VHF (9600 bit/s) + port0 F1OAT-9 9600 256 2 VHF (9600 bit/s) commands : setserial /dev/cua0 port 0 # to avoid conflict with yam driver insmod yam yamcfg yam0 io 0x2f8 irq 3 - ifconfig yam0 hw ax25 f1oat-9 up - - + ifconfig yam0 hw ax25 f1oat-9 up + + Example setup of yam0,3 for 4 serial port (com1->com4) : - + file /etc/ax25/axports : - port0 F1OAT-9 9600 256 2 VHF (9600 bit/s) - port1 F1OAT-8 9600 256 2 UHF1 (9600 bit/s) - port2 F1OAT-7 9600 256 2 UHF2 (9600 bit/s) - port3 F1OAT-8 9600 256 2 UHF3 (9600 bit/s) - + port0 F1OAT-9 9600 256 2 VHF (9600 bit/s) + port1 F1OAT-8 9600 256 2 UHF1 (9600 bit/s) + port2 F1OAT-7 9600 256 2 UHF2 (9600 bit/s) + port3 F1OAT-8 9600 256 2 UHF3 (9600 bit/s) + commands : setserial /dev/cua0 port 0 # to avoid conflict with yam driver setserial /dev/cua1 port 0 # to avoid conflict with yam driver @@ -80,13 +80,13 @@ Example setup of yam0,3 for 4 serial port (com1->com4) : insmod yam yamcfg yam2 irq 5 yamcfg yam3 irq 7 - ifconfig yam0 hw ax25 f1oat-9 up - ifconfig yam1 hw ax25 f1oat-8 up - ifconfig yam2 hw ax25 f1oat-7 up - ifconfig yam3 hw ax25 f1oat-6 up - + ifconfig yam0 hw ax25 f1oat-9 up + ifconfig yam1 hw ax25 f1oat-8 up + ifconfig yam2 hw ax25 f1oat-7 up + ifconfig yam3 hw ax25 f1oat-6 up + + - Good test !!! 73's Frederic F1OAT and Jean-Paul F6FBB |