path: root/hdlcutil/hdlcdrv.9

.\" Copyright 1996 Thomas Sailer (t.sailer@alumni.ethz.ch)
.\" May be distributed under the GNU General Public License
.\" "
.TH HDLCDRV 9 "2 October 1996" "Linux 2.1.x" "Kernel Reference Guide"
.SH NAME
hdlcdrv \- HDLC amateur (AX.25) packet radio network driver
.SH SYNOPSIS

.B #include <linux/hdlcdrv.h>

.B linux/drivers/net/hdlcdrv.c

.BI "extern inline void hdlcdrv_putbits(struct hdlcdrv_state * " s ", unsigned int " bits ");"

.BI "extern inline unsigned int hdlcdrv_getbits(struct hdlcdrv_state * " s ");"

.BI "extern inline void hdlcdrv_channelbit(struct hdlcdrv_state * " s ", unsigned int " bit ");"

.BI "extern inline void hdlcdrv_setdcd(struct hdlcdrv_state * " s " , int " dcd ");"

.BI "extern inline int hdlcdrv_ptt(struct hdlcdrv_state * " s ");"

.BI "void hdlcdrv_receiver(struct device *, struct hdlcdrv_state *);"

.BI "void hdlcdrv_transmitter(struct device *, struct hdlcdrv_state *);"

.BI "void hdlcdrv_arbitrate(struct device *, struct hdlcdrv_state *);"

.BI "int hdlcdrv_register_hdlcdrv(struct device * " dev ", struct hdlcdrv_ops * " ops ", unsigned int " privsize ", char * " ifname ", unsigned int " baseaddr " , unsigned int " irq ", unsigned int " dma ");

.BI "int hdlcdrv_unregister_hdlcdrv(struct device * " dev ");"

.SH DESCRIPTION
This driver should ease the implementation of simple AX.25 packet radio
modems where the software is responsible for the HDLC encoding and decoding.
Examples of such modems include the \fIbaycom\fP family and the
\fIsoundcard\fP modems.

This driver provides a standard Linux network driver interface.
It can even be compiled if Kernel AX.25 is not enabled in the Linux
configuration. This allows this driver to be used even for userland
AX.25 stacks such as \fIWampes\fP or \fITNOS\fP, with the help of
the \fInet2kiss\fP utility.

This driver does not access any hardware; it is the responsibility of
an additional hardware driver such as \fIbaycom\fP or \fIsoundmodem\fP
to access the hardware and derive the bitstream to feed into this
driver.

The hardware driver should store its state in a structure of the
following form:

.nf
struct hwdrv_state {
	struct hdlc_state \fIhdrv\fP;

	... the drivers private state
};
.fi

A pointer to this structure will be stored in \fIdev->priv\fP.

\fBhdlcdrv_register_hdlcdrv\fP registers a hardware driver to the
hdlc driver. \fIdev\fP points to storage for the \fIdevice\fP structure,
which must be provided by the hardware driver, but gets initialized by
this function call. \fIops\fP provides information about the hardware driver
and its calls. \fIprivsize\fP should be \fIsizeof(struct\ hwdrv_state)\fP.
\fIifname\fP specifies the name the interface should get. \fIbaseaddr\fP,
\fIirq\fP and \fIdma\fP are simply stored in the \fIdevice\fP structure.
After this function succeeds, the interface is registered with the kernel.
It is not running, however, this must be done with
\fBifconfig\ \fP\fIifname\fP\fB\ up\fP.

\fBhdlcdrv_unregister_hdlcdrv\fP shuts the interface down and unregisters
it with the kernel.

\fBhdlcdrv_putbits\fP delivers 16 received bits for processing to the HDLC
driver. This routine merely stores them in a buffer and does not process them.
It is thus fast and can be called with interrupts off. The least significant
bit should be the first one received.

\fBhdlcdrv_getbits\fP requests 16 bits from the driver for transmission.
The least significant bit should be transmitted first. This routine takes
them from a buffer and is therefore fast. It can be called with interrupts
off.

\fBhdlcdrv_channelbit\fP puts a single bit into a buffer, which can be
displayed with \fBsethdlc\ \-s\fP. It is intended for driver debugging
purposes.

\fBhdlcdrv_setdcd\fP informs the HDLC driver about the channel state
(i.e. if the hardware driver detected a data carrier). This information
is used in the channel access algorithm, i.e. it prevents the driver
from transmitting on a half duplex channel if there is already a
transmitter on air.

\fBhdlcdrv_ptt\fP should be called by the hardware driver to determine
if it should start or stop transmitting. The hardware driver does not
need to worry about keyup delays. This is done by the HDLC driver.

\fBhdlcdrv_receiver\fP actually processes the received bits delivered
by \fBhdlcdrv_putbits\fP. It should be called with interrupts on.
It guards itself against reentrance problems.

\fBhdlcdrv_transmitter\fP actually prepares the bits to be transmitted.
It should be called with interrupts on. It guards itself against
reentrance problems.

\fBhdlcdrv_arbitrate\fP does the channel access algorithm
(p-persistent CSMA). It should be called once every 10ms. Note that the
hardware driver \fBmust\fP set the \fIhdrv.par.bitrate\fP field prior
to starting operation so that \fBhdlcdrv\fP can calculate the transmitter
keyup delay correctly.

.SH "HARDWARE DRIVER ENTRY POINTS"
The hardware driver should provide the following information to
the HDLC driver:

.nf
struct hdlcdrv_ops {
	const char *\fIdrvname\fP;
	const char *\fIdrvinfo\fP;
	int (*\fIopen\fP)(struct device *);
	int (*\fIclose\fP)(struct device *);
	int (*\fIioctl\fP)(struct device *, struct ifreq *, int);
};
.fi

\fBdrvname\fP and \fBdrvinfo\fP are just for informational purposes.

The following routines receive a pointer to the \fIdevice\fP structure,
where they may find the io address, irq and dma channels.

\fBopen\fP must be provided. It is called during
\fBifconfig\ \fP\fIifname\fP\fB\ up\fP and should check for the hardware,
grab it and initialize it. It usually installs an interrupt handler
which then gets invoked by the hardware.

\fBclose\fP must be provided. It is called during
\fBifconfig\ \fP\fIifname\fP\fB\ down\fP and should undo all actions done
by \fBopen\fP, i.e. release io regions and irqs.

\fBioctl\fP may be provided to implement device specific ioctl's.

.SH "IOCTL CALLS"

The driver only responds to \fISIOCDEVPRIVATE\fP. Parameters are passed
from and to the driver using the following struct:

.nf
struct hdlcdrv_ioctl {
	int cmd;
	union {
		struct hdlcdrv_params mp;
		struct hdlcdrv_channel_params cp;
		struct hdlcdrv_channel_state cs;
		unsigned int calibrate;
		unsigned char bits;
	} data;
};
.fi

Since the 16 private \fIioctl\ request\fP numbers for network drivers
were not enough, the driver implements its own \fIsub\ request\fP number
with \fIcmd\fP. The following numbers are implemented:

.TP
.B HDLCDRVCTL_GETMODEMPAR
returns the IO parameters of the modem in \fIdata.mp\fP. This includes
the io address, irq, eventually dma, and ports to output a PTT signal.

.TP
.B HDLCDRVCTL_SETMODEMPAR
sets the modem parameters. Only superuser can do this. Parameters
can only be changed if the interface is not running (i.e. down).

.TP
.B HDLCDRVCTL_GETCHANNELPAR
returns the channel access parameters.

.TP
.B HDLCDRVCTL_SETCHANNELPAR
sets the channel access parameters. Only superuser can do this.
They may also be changed using the \fBkissparms\fP command if using
kernel AX.25 or the \fBparam\fP command of \fB*NOS\fP.

.TP
.B HDLCDRVCTL_GETSTAT
statistics and status information, such as if a carrier is detected
on the channel and if the interface is currently transmitting.

.TP
.B HDLCDRVCTL_CALIBRATE
instructs the driver to transmit a calibration pattern for the
specified number of seconds.

.TP
.B HDLCDRVCTL_GETSAMPLES
returns the bits delivered by the hardware driver with
\fIhdlcdrv_channelbit\fP. The bits are returned 8 at a time
with the least significant bit the first one. This command may not be
available, depending on debugging settings.

.TP
.B HDLCDRVCTL_GETBITS
returns the bits delivered by the hardware driver to the HDLC decoder.
The bits are returned 8 at a time with the least significant bit the
first one. This command may not be available, depending on debugging
settings.

.SH "SEE ALSO"
.BR baycom "\ (9), " soundmodem "\ (9), " sethdlc "\ (8), "
linux/drivers/net/hdlcdrv.c,

.SH AUTHOR
hdlcdrv was written by Thomas Sailer, HB9JNX/AE4WA, (t.sailer@alumni.ethz.ch).