Import libax25 0.0.4 from tarballlibax25-0.0.4

9 files changed, 747 insertions, 1096 deletions

diff --git a/Makefile.in b/Makefile.in
index 0b93dcf..3247f52 100644
--- a/Makefile.in
+++ b/Makefile.in
@@ -67,9 +67,9 @@ LIBTOOL = @LIBTOOL@
 LN_S = @LN_S@
 MAKEINFO = @MAKEINFO@
 NM = @NM@
+OBJDUMP = @OBJDUMP@
 PACKAGE = @PACKAGE@
 RANLIB = @RANLIB@
-USE_SYMBOL_UNDERSCORE = @USE_SYMBOL_UNDERSCORE@
 VERSION = @VERSION@
 
 lib_LTLIBRARIES = libax25.la libax25io.la
diff --git a/README b/README
index 976c4c0..39a7079 100644
--- a/README
+++ b/README
@@ -1,13 +1,8 @@
 AX25 Library
 ============
 
-THIS LIBRARY IS ALPHA CODE AND IS ONLY BEEN RELEASE FOR DEVELOPERS FOR
-DEBUGGING.
-
-This means if you are only installing this because it is the latest
-and greatest and you don't understand how to diagnose bugs, then you
-should probably not run it and go back to the ax25-utils-2*
-packages.
+This library set is still really under test but is now release for
+general use.
 
 You are supposed to use glibc 2.1 (libc6 unstable libraries) for this
 package.  I have attempted to cater for glibc 2.0 users here.
diff --git a/aclocal.m4 b/aclocal.m4
index 5da47f2..3dc036c 100644
--- a/aclocal.m4
+++ b/aclocal.m4
@@ -126,7 +126,7 @@ done<<>>dnl>>)
 changequote([,]))])
 
 
-# serial 35 AC_PROG_LIBTOOL
+# serial 39 AC_PROG_LIBTOOL
 AC_DEFUN(AC_PROG_LIBTOOL,
 [AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
 
@@ -135,8 +135,9 @@ AC_CACHE_SAVE
 
 # Actually configure libtool.  ac_aux_dir is where install-sh is found.
 CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \
-DLLTOOL="$DLLTOOL" AS="$AS" \
+LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
+DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
 ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
 $libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
 || AC_MSG_ERROR([libtool configure failed])
@@ -167,8 +168,6 @@ AC_REQUIRE([AC_PROG_RANLIB])dnl
 AC_REQUIRE([AC_PROG_CC])dnl
 AC_REQUIRE([AC_PROG_LD])dnl
 AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_SYS_NM_PARSE])dnl
-AC_REQUIRE([AC_SYS_SYMBOL_UNDERSCORE])dnl
 AC_REQUIRE([AC_PROG_LN_S])dnl
 dnl
 
@@ -177,10 +176,16 @@ libtool_flags="--cache-file=$cache_file"
 test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
 test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
 test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$lt_dlopen" = yes && libtool_flags="$libtool_flags --enable-dlopen"
-test "$silent" = yes && libtool_flags="$libtool_flags --silent"
 test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
 test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
+[libtool_flags="$libtool_flags --enable-dlopen"])
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+[libtool_flags="$libtool_flags --enable-win32-dll"])
+AC_ARG_ENABLE(libtool-lock,
+  [  --disable-libtool-lock  avoid locking (might break parallel builds)])
+test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
+test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
 
 # Some flags need to be propagated to the compiler or linker for good
 # libtool support.
@@ -216,33 +221,28 @@ case "$host" in
   fi
   ;;
 
-*-*-cygwin*)
-  AC_SYS_LIBTOOL_CYGWIN
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+[*-*-cygwin* | *-*-mingw*)
+  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+  AC_CHECK_TOOL(AS, as, false)
+  AC_CHECK_TOOL(OBJDUMP, objdump, false)
   ;;
-
+])
 esac
-
-# enable the --disable-libtool-lock switch
-
-AC_ARG_ENABLE(libtool-lock,
-[  --disable-libtool-lock  force libtool not to do file locking],
-need_locks=$enableval,
-need_locks=yes)
-
-if test x"$need_locks" = xno; then
-  libtool_flags="$libtool_flags --disable-lock"
-fi
 ])
 
-# AC_LIBTOOL_DLOPEN - check for dlopen support
-AC_DEFUN(AC_LIBTOOL_DLOPEN, [lt_dlopen=yes])
+# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
+AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
+
+# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
+AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
 
 # AC_ENABLE_SHARED - implement the --enable-shared flag
 # Usage: AC_ENABLE_SHARED[(DEFAULT)]
 #   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
 #   `yes'.
-AC_DEFUN(AC_ENABLE_SHARED,
-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_DEFUN(AC_ENABLE_SHARED, [dnl
+define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
 AC_ARG_ENABLE(shared,
 changequote(<<, >>)dnl
 <<  --enable-shared[=PKGS]  build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
@@ -267,15 +267,15 @@ enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
 ])
 
 # AC_DISABLE_SHARED - set the default shared flag to --disable-shared
-AC_DEFUN(AC_DISABLE_SHARED,
-[AC_ENABLE_SHARED(no)])
+AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_SHARED(no)])
 
 # AC_ENABLE_STATIC - implement the --enable-static flag
 # Usage: AC_ENABLE_STATIC[(DEFAULT)]
 #   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
 #   `yes'.
-AC_DEFUN(AC_ENABLE_STATIC,
-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_DEFUN(AC_ENABLE_STATIC, [dnl
+define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
 AC_ARG_ENABLE(static,
 changequote(<<, >>)dnl
 <<  --enable-static[=PKGS]  build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
@@ -300,16 +300,16 @@ enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
 ])
 
 # AC_DISABLE_STATIC - set the default static flag to --disable-static
-AC_DEFUN(AC_DISABLE_STATIC,
-[AC_ENABLE_STATIC(no)])
+AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_STATIC(no)])
 
 
 # AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
 # Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
 #   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
 #   `yes'.
-AC_DEFUN(AC_ENABLE_FAST_INSTALL,
-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl
+define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
 AC_ARG_ENABLE(fast-install,
 changequote(<<, >>)dnl
 <<  --enable-fast-install[=PKGS]  optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
@@ -334,9 +334,8 @@ enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
 ])
 
 # AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
-AC_DEFUN(AC_DISABLE_FAST_INSTALL,
-[AC_ENABLE_FAST_INSTALL(no)])
-
+AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_FAST_INSTALL(no)])
 
 # AC_PROG_LD - find the path to the GNU or non-GNU linker
 AC_DEFUN(AC_PROG_LD,
@@ -354,7 +353,7 @@ if test "$ac_cv_prog_gcc" = yes; then
   case "$ac_prog" in
     # Accept absolute paths.
 changequote(,)dnl
-    /* | [A-Za-z]:[\\/]*)
+    [\\/]* | [A-Za-z]:[\\/]*)
       re_direlt='/[^/][^/]*/\.\./'
 changequote([,])dnl
       # Canonicalize the path of ld
@@ -380,10 +379,10 @@ else
 fi
 AC_CACHE_VAL(ac_cv_path_LD,
 [if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
   for ac_dir in $PATH; do
     test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog"; then
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
       ac_cv_path_LD="$ac_dir/$ac_prog"
       # Check to see if the program is GNU ld.  I'd rather use --version,
       # but apparently some GNU ld's only accept -v.
@@ -428,10 +427,10 @@ AC_CACHE_VAL(ac_cv_path_NM,
   # Let the user override the test.
   ac_cv_path_NM="$NM"
 else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
   for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
     test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/nm; then
+    if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
       # Check to see if the nm accepts a BSD-compat flag.
       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
       #   nm: unknown option "B" ignored
@@ -455,227 +454,22 @@ AC_MSG_RESULT([$NM])
 AC_SUBST(NM)
 ])
 
-# AC_SYS_NM_PARSE - Check for command to grab the raw symbol name followed
-# by C symbol name from nm.
-AC_DEFUN(AC_SYS_NM_PARSE,
+# AC_CHECK_LIBM - check for math library
+AC_DEFUN(AC_CHECK_LIBM,
 [AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-AC_MSG_CHECKING([command to parse $NM output])
-AC_CACHE_VAL(ac_cv_sys_global_symbol_pipe,
-[# These are sane defaults that work on at least a few old systems.
-# {They come from Ultrix.  What could be older than Ultrix?!! ;)}
-
-changequote(,)dnl
-# Character class describing NM global symbol codes.
-ac_symcode='[BCDEGRST]'
-
-# Regexp to match symbols that can be accessed directly from C.
-ac_sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-
-# Transform the above into a raw symbol and a C symbol.
-ac_symxfrm='\1 \2\3 \3'
-
-# Transform an extracted symbol line into a proper C declaration
-ac_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
-
-# Define system-specific variables.
-case "$host_os" in
-aix*)
-  ac_symcode='[BCDT]'
-  ;;
-cygwin* | mingw*)
-  ac_symcode='[ABCDGISTW]'
-  ;;
-hpux*)
-  ac_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^. .* \(.*\)$/extern char \1;/p'"
+LIBM=
+case "$host" in
+*-*-beos* | *-*-cygwin*)
+  # These system don't have libm
   ;;
-irix*)
-  ac_symcode='[BCDEGRST]'
+*-ncr-sysv4.3*)
+  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+  AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
   ;;
-solaris*)
-  ac_symcode='[BDT]'
+*)
+  AC_CHECK_LIB(m, main, LIBM="-lm")
   ;;
 esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
-  ac_symcode='[ABCDGISTW]'
-fi
-changequote([,])dnl
-
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
-
-  ac_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ 	]\($ac_symcode\)[ 	][ 	]*\($ac_symprfx\)$ac_sympat$/$ac_symxfrm/p'"
-
-  # Check to see that the pipe works correctly.
-  ac_pipe_works=no
-  rm -f conftest.$ac_ext
-  cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func;return 0;}
-EOF
-
-  if AC_TRY_EVAL(ac_compile); then
-    # Now try to grab the symbols.
-    ac_nlist=conftest.nm
-  
-    if AC_TRY_EVAL(NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) && test -s "$ac_nlist"; then
-
-      # Try sorting and uniquifying the output.
-      if sort "$ac_nlist" | uniq > "$ac_nlist"T; then
-	mv -f "$ac_nlist"T "$ac_nlist"
-      else
-	rm -f "$ac_nlist"T
-      fi
-
-      # Make sure that we snagged all the symbols we need.
-      if egrep ' nm_test_var$' "$ac_nlist" >/dev/null; then
-	if egrep ' nm_test_func$' "$ac_nlist" >/dev/null; then
-	  cat <<EOF > conftest.c
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-EOF
-	  # Now generate the symbol file.
-	  eval "$ac_global_symbol_to_cdecl"' < "$ac_nlist" >> conftest.c'
-
-	  cat <<EOF >> conftest.c
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
-  const char *name;
-  lt_ptr_t address;
-}
-changequote(,)dnl
-lt_preloaded_symbols[] =
-changequote([,])dnl
-{
-EOF
-	sed 's/^. \(.*\) \(.*\)$/  {"\2", (lt_ptr_t) \&\2},/' < "$ac_nlist" >> conftest.c
-	cat <<\EOF >> conftest.c
-  {0, (lt_ptr_t) 0}
-};
-
-#ifdef __cplusplus
-}
-#endif
-EOF
-	  # Now try linking the two files.
-	  mv conftest.$ac_objext conftestm.$ac_objext
-	  ac_save_LIBS="$LIBS"
-	  ac_save_CFLAGS="$CFLAGS"
-	  LIBS="conftestm.$ac_objext"
-	  CFLAGS="$CFLAGS$no_builtin_flag"
-	  if AC_TRY_EVAL(ac_link) && test -s conftest; then
-	    ac_pipe_works=yes
-	  else
-	    echo "configure: failed program was:" >&AC_FD_CC
-	    cat conftest.c >&AC_FD_CC
-	  fi
-	  LIBS="$ac_save_LIBS"
-	  CFLAGS="$ac_save_CFLAGS"
-	else
-	  echo "cannot find nm_test_func in $ac_nlist" >&AC_FD_CC
-	fi
-      else
-	echo "cannot find nm_test_var in $ac_nlist" >&AC_FD_CC
-      fi
-    else
-      echo "cannot run $ac_cv_sys_global_symbol_pipe" >&AC_FD_CC
-    fi
-  else
-    echo "$progname: failed program was:" >&AC_FD_CC
-    cat conftest.c >&AC_FD_CC
-  fi
-  rm -rf conftest*
-
-  # Do not use the global_symbol_pipe unless it works.
-  if test "$ac_pipe_works" = yes; then
-    if test x"$ac_symprfx" = x"_"; then
-      ac_cv_sys_symbol_underscore=yes
-    else
-      ac_cv_sys_symbol_underscore=no
-    fi
-    break
-  else
-    ac_cv_sys_global_symbol_pipe=
-  fi
-done
-])
-
-ac_result=yes
-if test -z "$ac_cv_sys_global_symbol_pipe"; then
-   ac_result=no
-fi
-AC_MSG_RESULT($ac_result)
-])
-
-# AC_SYS_LIBTOOL_CYGWIN - find tools needed on cygwin
-AC_DEFUN(AC_SYS_LIBTOOL_CYGWIN,
-[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-AC_CHECK_TOOL(AS, as, false)
-])
-
-# AC_SYS_SYMBOL_UNDERSCORE - does the compiler prefix global symbols
-#                            with an underscore?
-AC_DEFUN(AC_SYS_SYMBOL_UNDERSCORE,
-[AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_SYS_NM_PARSE])dnl
-AC_MSG_CHECKING([for _ prefix in compiled symbols])
-AC_CACHE_VAL(ac_cv_sys_symbol_underscore,
-[ac_cv_sys_symbol_underscore=no
-cat > conftest.$ac_ext <<EOF
-void nm_test_func(){}
-int main(){nm_test_func;return 0;}
-EOF
-if AC_TRY_EVAL(ac_compile); then
-  # Now try to grab the symbols.
-  ac_nlist=conftest.nm
-  if AC_TRY_EVAL(NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) && test -s "$ac_nlist"; then
-    # See whether the symbols have a leading underscore.
-    if egrep '^. _nm_test_func' "$ac_nlist" >/dev/null; then
-      ac_cv_sys_symbol_underscore=yes
-    else
-      if egrep '^. nm_test_func ' "$ac_nlist" >/dev/null; then
-	:
-      else
-	echo "configure: cannot find nm_test_func in $ac_nlist" >&AC_FD_CC
-      fi
-    fi
-  else
-    echo "configure: cannot run $ac_cv_sys_global_symbol_pipe" >&AC_FD_CC
-  fi
-else
-  echo "configure: failed program was:" >&AC_FD_CC
-  cat conftest.c >&AC_FD_CC
-fi
-rm -rf conftest*
-])
-AC_MSG_RESULT($ac_cv_sys_symbol_underscore)
-USE_SYMBOL_UNDERSCORE=${ac_cv_sys_symbol_underscore=no}
-AC_SUBST(USE_SYMBOL_UNDERSCORE)dnl
-])
-
-# AC_CHECK_LIBM - check for math library
-AC_DEFUN(AC_CHECK_LIBM, [
-AC_CHECK_LIB(mw, _mwvalidcheckl)
-AC_CHECK_LIB(m, cos)
 ])
 
 # AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
@@ -686,7 +480,7 @@ AC_CHECK_LIB(m, cos)
 # '${top_builddir}/' (note the single quotes!) if your package is not
 # flat, and, if you're not using automake, define top_builddir as
 # appropriate in the Makefiles.
-AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [
+AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
   case "$enable_ltdl_convenience" in
   no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
   "") enable_ltdl_convenience=yes
@@ -704,16 +498,21 @@ AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [
 # flat, and, if you're not using automake, define top_builddir as
 # appropriate in the Makefiles.
 # In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [
-  AC_CHECK_LIB(ltdl, main, LIBLTDL="-lltdl", [
-    case "$enable_ltdl_install" in
-    no) AC_MSG_WARN([libltdl not installed, but installation disabled]) ;;
-    "") enable_ltdl_install=yes
-        ac_configure_args="$ac_configure_args --enable-ltdl-install" ;;
-    esac
+AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+  AC_CHECK_LIB(ltdl, main,
+  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
+  [if test x"$enable_ltdl_install" = xno; then
+     AC_MSG_WARN([libltdl not installed, but installation disabled])
+   else
+     enable_ltdl_install=yes
+   fi
   ])
-  if test x"$enable_ltdl_install" != x"no"; then
+  if test x"$enable_ltdl_install" = x"yes"; then
+    ac_configure_args="$ac_configure_args --enable-ltdl-install"
     LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la
+  else
+    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
+    LIBLTDL="-lltdl"
   fi
 ])
 
@@ -725,7 +524,7 @@ AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl
 AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
 AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
 AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl
-AC_DEFUN(AM_SYS_NM_PARSE, [indir([AC_SYS_NM_PARSE])])dnl
-AC_DEFUN(AM_SYS_SYMBOL_UNDERSCORE, [indir([AC_SYS_SYMBOL_UNDERSCORE])])dnl
-AC_DEFUN(AM_SYS_LIBTOOL_CYGWIN, [indir([AC_SYS_LIBTOOL_CYGWIN])])dnl
+
+dnl This is just to quiet aclocal about the macro not being used
+ifelse(a,b,[AC_DISABLE_FAST_INSTALL])dnl
 
diff --git a/config.h b/config.h
index cea5324..40f6388 100644
--- a/config.h
+++ b/config.h
@@ -50,8 +50,8 @@
 #define HAVE_ZLIB_H 1
 
 /* Name of package */
-#define PACKAGE "ax25-lib"
+#define PACKAGE "libax25"
 
 /* Version number of package */
-#define VERSION "0.0.3"
+#define VERSION "0.0.4"
 
diff --git a/config.sub b/config.sub
index 78d36b1..85bbbb3 100755
--- a/config.sub
+++ b/config.sub
@@ -151,12 +151,12 @@ case $basic_machine in
 	# Some are omitted here because they have special meanings below.
 	tahoe | i860 | m32r | m68k | m68000 | m88k | ns32k | arc | arm \
 		| arme[lb] | pyramid | mn10200 | mn10300 | tron | a29k \
-		| 580 | i960 | h8300 | hppa | hppa1.0 | hppa1.1 | hppa2.0 \
-		| hppa2.0w \
-		| alpha | alphaev5 | alphaev56 | we32k | ns16k | clipper \
-		| i370 | sh | powerpc | powerpcle | 1750a | dsp16xx | pdp11 \
-		| mips64 | mipsel | mips64el | mips64orion | mips64orionel \
-		| mipstx39 | mipstx39el \
+		| 580 | i960 | h8300 \
+		| hppa | hppa1.0 | hppa1.1 | hppa2.0 | hppa2.0w \
+		| alpha | alphaev[4-7] | alphaev56 | alphapca5[67] \
+		| we32k | ns16k | clipper | i370 | sh | powerpc | powerpcle \
+		| 1750a | dsp16xx | pdp11 | mips64 | mipsel | mips64el \
+		| mips64orion | mips64orionel | mipstx39 | mipstx39el \
 		| sparc | sparclet | sparclite | sparc64 | v850)
 		basic_machine=$basic_machine-unknown
 		;;
@@ -176,10 +176,11 @@ case $basic_machine in
 	      | m88k-* | sparc-* | ns32k-* | fx80-* | arc-* | arm-* | c[123]* \
 	      | mips-* | pyramid-* | tron-* | a29k-* | romp-* | rs6000-* \
 	      | power-* | none-* | 580-* | cray2-* | h8300-* | i960-* \
-	      | xmp-* | ymp-* | hppa-* | hppa1.0-* | hppa1.1-* | hppa2.0-* \
-	      | hppa2.0w-* \
-	      | alpha-* | alphaev5-* | alphaev56-* | we32k-* | cydra-* \
-	      | ns16k-* | pn-* | np1-* | xps100-* | clipper-* | orion-* \
+	      | xmp-* | ymp-* \
+	      | hppa-* | hppa1.0-* | hppa1.1-* | hppa2.0-* | hppa2.0w-* \
+	      | alpha-* | alphaev[4-7]-* | alphaev56-* | alphapca5[67]-* \
+	      | we32k-* | cydra-* | ns16k-* | pn-* | np1-* | xps100-* \
+	      | clipper-* | orion-* \
 	      | sparclite-* | pdp11-* | sh-* | powerpc-* | powerpcle-* \
 	      | sparc64-* | mips64-* | mipsel-* \
 	      | mips64el-* | mips64orion-* | mips64orionel-*  \
@@ -630,6 +631,10 @@ case $basic_machine in
         xps | xps100)
 		basic_machine=xps100-honeywell
 		;;
+	*mint | *MiNT)
+		basic_machine=m68k-atari
+		os=-mint
+		;;
 	none)
 		basic_machine=none-none
 		os=-none
@@ -790,6 +795,9 @@ case $os in
 	-xenix)
 		os=-xenix
 		;;
+        -*mint | -*MiNT)
+	        os=-mint
+		;;
 	-none)
 		;;
 	*)
@@ -914,6 +922,9 @@ case $basic_machine in
 	f301-fujitsu)
 		os=-uxpv
 		;;
+	*-atari*)
+		os=-mint
+		;;
 	*)
 		os=-none
 		;;
@@ -971,6 +982,9 @@ case $basic_machine in
 			-aux*)
 				vendor=apple
 				;;
+			-*mint | -*MiNT)
+				vendor=atari
+				;;
 		esac
 		basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
 		;;
diff --git a/configure b/configure
index e77e5de..e7236bb 100755
--- a/configure
+++ b/configure
@@ -20,7 +20,7 @@ ac_help="$ac_help
 ac_help="$ac_help
   --with-gnu-ld           assume the C compiler uses GNU ld [default=no]"
 ac_help="$ac_help
-  --disable-libtool-lock  force libtool not to do file locking"
+  --disable-libtool-lock  avoid locking (might break parallel builds)"
 
 # Initialize some variables set by options.
 # The variables have the same names as the options, with
@@ -533,12 +533,12 @@ fi
 
 AXLIB_MAJOR_VERSION=0
 AXLIB_MINOR_VERSION=0
-AXLIB_MICRO_VERSION=3
+AXLIB_MICRO_VERSION=4
 AXLIB_VERSION=$AXLIB_MAJOR_VERSION.$AXLIB_MINOR_VERSION.$AXLIB_MICRO_VERSION
 
 # for automake
 VERSION=$AXLIB_VERSION
-PACKAGE=ax25-lib
+PACKAGE=libax25
 
 ac_aux_dir=
 for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
@@ -1305,7 +1305,7 @@ echo "configure:1305: checking for ld used by GCC" >&5
   ac_prog=`($CC -print-prog-name=ld) 2>&5`
   case "$ac_prog" in
     # Accept absolute paths.
-    /* | [A-Za-z]:[\\/]*)
+    [\\/]* | [A-Za-z]:[\\/]*)
       re_direlt='/[^/][^/]*/\.\./'
       # Canonicalize the path of ld
       ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
@@ -1334,10 +1334,10 @@ if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
   for ac_dir in $PATH; do
     test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog"; then
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
       ac_cv_path_LD="$ac_dir/$ac_prog"
       # Check to see if the program is GNU ld.  I'd rather use --version,
       # but apparently some GNU ld's only accept -v.
@@ -1388,10 +1388,10 @@ else
   # Let the user override the test.
   ac_cv_path_NM="$NM"
 else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
   for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
     test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/nm; then
+    if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
       # Check to see if the nm accepts a BSD-compat flag.
       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
       #   nm: unknown option "B" ignored
@@ -1416,212 +1416,8 @@ NM="$ac_cv_path_NM"
 echo "$ac_t""$NM" 1>&6
 
 
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-echo $ac_n "checking command to parse $NM output""... $ac_c" 1>&6
-echo "configure:1422: checking command to parse $NM output" >&5
-if eval "test \"`echo '$''{'ac_cv_sys_global_symbol_pipe'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  # These are sane defaults that work on at least a few old systems.
-# {They come from Ultrix.  What could be older than Ultrix?!! ;)}
-
-# Character class describing NM global symbol codes.
-ac_symcode='[BCDEGRST]'
-
-# Regexp to match symbols that can be accessed directly from C.
-ac_sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-
-# Transform the above into a raw symbol and a C symbol.
-ac_symxfrm='\1 \2\3 \3'
-
-# Transform an extracted symbol line into a proper C declaration
-ac_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
-
-# Define system-specific variables.
-case "$host_os" in
-aix*)
-  ac_symcode='[BCDT]'
-  ;;
-cygwin* | mingw*)
-  ac_symcode='[ABCDGISTW]'
-  ;;
-hpux*)
-  ac_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^. .* \(.*\)$/extern char \1;/p'"
-  ;;
-irix*)
-  ac_symcode='[BCDEGRST]'
-  ;;
-solaris*)
-  ac_symcode='[BDT]'
-  ;;
-esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
-  ac_symcode='[ABCDGISTW]'
-fi
-
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
-
-  ac_cv_sys_global_symbol_pipe="sed -n -e 's/^.* 	\($ac_symcode\) 	 	*\($ac_symprfx\)$ac_sympat$/$ac_symxfrm/p'"
-
-  # Check to see that the pipe works correctly.
-  ac_pipe_works=no
-  rm -f conftest.$ac_ext
-  cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func;return 0;}
-EOF
-
-  if { (eval echo configure:1485: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-    # Now try to grab the symbols.
-    ac_nlist=conftest.nm
-  
-    if { (eval echo configure:1489: \"$NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist\") 1>&5; (eval $NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) 2>&5; } && test -s "$ac_nlist"; then
-
-      # Try sorting and uniquifying the output.
-      if sort "$ac_nlist" | uniq > "$ac_nlist"T; then
-	mv -f "$ac_nlist"T "$ac_nlist"
-      else
-	rm -f "$ac_nlist"T
-      fi
-
-      # Make sure that we snagged all the symbols we need.
-      if egrep ' nm_test_var$' "$ac_nlist" >/dev/null; then
-	if egrep ' nm_test_func$' "$ac_nlist" >/dev/null; then
-	  cat <<EOF > conftest.c
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-EOF
-	  # Now generate the symbol file.
-	  eval "$ac_global_symbol_to_cdecl"' < "$ac_nlist" >> conftest.c'
-
-	  cat <<EOF >> conftest.c
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
-  const char *name;
-  lt_ptr_t address;
-}
-lt_preloaded_symbols[] =
-{
-EOF
-	sed 's/^. \(.*\) \(.*\)$/  {"\2", (lt_ptr_t) \&\2},/' < "$ac_nlist" >> conftest.c
-	cat <<\EOF >> conftest.c
-  {0, (lt_ptr_t) 0}
-};
-
-#ifdef __cplusplus
-}
-#endif
-EOF
-	  # Now try linking the two files.
-	  mv conftest.$ac_objext conftestm.$ac_objext
-	  ac_save_LIBS="$LIBS"
-	  ac_save_CFLAGS="$CFLAGS"
-	  LIBS="conftestm.$ac_objext"
-	  CFLAGS="$CFLAGS$no_builtin_flag"
-	  if { (eval echo configure:1541: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
-	    ac_pipe_works=yes
-	  else
-	    echo "configure: failed program was:" >&5
-	    cat conftest.c >&5
-	  fi
-	  LIBS="$ac_save_LIBS"
-	  CFLAGS="$ac_save_CFLAGS"
-	else
-	  echo "cannot find nm_test_func in $ac_nlist" >&5
-	fi
-      else
-	echo "cannot find nm_test_var in $ac_nlist" >&5
-      fi
-    else
-      echo "cannot run $ac_cv_sys_global_symbol_pipe" >&5
-    fi
-  else
-    echo "$progname: failed program was:" >&5
-    cat conftest.c >&5
-  fi
-  rm -rf conftest*
-
-  # Do not use the global_symbol_pipe unless it works.
-  if test "$ac_pipe_works" = yes; then
-    if test x"$ac_symprfx" = x"_"; then
-      ac_cv_sys_symbol_underscore=yes
-    else
-      ac_cv_sys_symbol_underscore=no
-    fi
-    break
-  else
-    ac_cv_sys_global_symbol_pipe=
-  fi
-done
-
-fi
-
-
-ac_result=yes
-if test -z "$ac_cv_sys_global_symbol_pipe"; then
-   ac_result=no
-fi
-echo "$ac_t""$ac_result" 1>&6
-
-echo $ac_n "checking for _ prefix in compiled symbols""... $ac_c" 1>&6
-echo "configure:1587: checking for _ prefix in compiled symbols" >&5
-if eval "test \"`echo '$''{'ac_cv_sys_symbol_underscore'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  ac_cv_sys_symbol_underscore=no
-cat > conftest.$ac_ext <<EOF
-void nm_test_func(){}
-int main(){nm_test_func;return 0;}
-EOF
-if { (eval echo configure:1596: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  # Now try to grab the symbols.
-  ac_nlist=conftest.nm
-  if { (eval echo configure:1599: \"$NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist\") 1>&5; (eval $NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) 2>&5; } && test -s "$ac_nlist"; then
-    # See whether the symbols have a leading underscore.
-    if egrep '^. _nm_test_func' "$ac_nlist" >/dev/null; then
-      ac_cv_sys_symbol_underscore=yes
-    else
-      if egrep '^. nm_test_func ' "$ac_nlist" >/dev/null; then
-	:
-      else
-	echo "configure: cannot find nm_test_func in $ac_nlist" >&5
-      fi
-    fi
-  else
-    echo "configure: cannot run $ac_cv_sys_global_symbol_pipe" >&5
-  fi
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.c >&5
-fi
-rm -rf conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_sys_symbol_underscore" 1>&6
-USE_SYMBOL_UNDERSCORE=${ac_cv_sys_symbol_underscore=no}
-
 echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1625: checking whether ln -s works" >&5
+echo "configure:1421: checking whether ln -s works" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1641,30 +1437,32 @@ else
   echo "$ac_t""no" 1>&6
 fi
 
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
 
 # Check for any special flags to pass to ltconfig.
 libtool_flags="--cache-file=$cache_file"
 test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
 test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
 test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$lt_dlopen" = yes && libtool_flags="$libtool_flags --enable-dlopen"
-test "$silent" = yes && libtool_flags="$libtool_flags --silent"
 test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
 test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
 
+
+# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then
+  enableval="$enable_libtool_lock"
+  :
+fi
+
+test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
+test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
+
 # Some flags need to be propagated to the compiler or linker for good
 # libtool support.
 case "$host" in
 *-*-irix6*)
   # Find out which ABI we are using.
-  echo '#line 1667 "configure"' > conftest.$ac_ext
-  if { (eval echo configure:1668: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  echo '#line 1465 "configure"' > conftest.$ac_ext
+  if { (eval echo configure:1466: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
     case "`/usr/bin/file conftest.o`" in
     *32-bit*)
       LD="${LD-ld} -32"
@@ -1685,19 +1483,19 @@ case "$host" in
   SAVE_CFLAGS="$CFLAGS"
   CFLAGS="$CFLAGS -belf"
   echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:1689: checking whether the C compiler needs -belf" >&5
+echo "configure:1487: checking whether the C compiler needs -belf" >&5
 if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1694 "configure"
+#line 1492 "configure"
 #include "confdefs.h"
 
 int main() {
 
 ; return 0; }
 EOF
-if { (eval echo configure:1701: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1499: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   lt_cv_cc_needs_belf=yes
 else
@@ -1716,161 +1514,9 @@ echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
   fi
   ;;
 
-*-*-cygwin*)
-  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
-set dummy ${ac_tool_prefix}dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1724: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$DLLTOOL"; then
-  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
-  echo "$ac_t""$DLLTOOL" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_DLLTOOL"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "dlltool", so it can be a program name with args.
-set dummy dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1756: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$DLLTOOL"; then
-  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_DLLTOOL="dlltool"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_DLLTOOL" && ac_cv_prog_DLLTOOL="false"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
-  echo "$ac_t""$DLLTOOL" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  DLLTOOL="false"
-fi
-fi
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1791: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_AS"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "as", so it can be a program name with args.
-set dummy as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1823: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="false"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  AS="false"
-fi
-fi
-
-
-  ;;
 
 esac
 
-# enable the --disable-libtool-lock switch
-
-# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then
-  enableval="$enable_libtool_lock"
-  need_locks=$enableval
-else
-  need_locks=yes
-fi
-
-
-if test x"$need_locks" = xno; then
-  libtool_flags="$libtool_flags --disable-lock"
-fi
-
 
 # Save cache, so that ltconfig can load it
 cat > confcache <<\EOF
@@ -1923,8 +1569,9 @@ rm -f confcache
 
 # Actually configure libtool.  ac_aux_dir is where install-sh is found.
 CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \
-DLLTOOL="$DLLTOOL" AS="$AS" \
+LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
+DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
 ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
 $libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
 || { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
@@ -1952,7 +1599,7 @@ exec 5>>./config.log
 
 
 echo $ac_n "checking whether setpgrp takes no argument""... $ac_c" 1>&6
-echo "configure:1956: checking whether setpgrp takes no argument" >&5
+echo "configure:1603: checking whether setpgrp takes no argument" >&5
 if eval "test \"`echo '$''{'ac_cv_func_setpgrp_void'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1960,7 +1607,7 @@ else
   { echo "configure: error: cannot check setpgrp if cross compiling" 1>&2; exit 1; }
 else
   cat > conftest.$ac_ext <<EOF
-#line 1964 "configure"
+#line 1611 "configure"
 #include "confdefs.h"
 
 #ifdef HAVE_UNISTD_H
@@ -1980,7 +1627,7 @@ main()
 }
 
 EOF
-if { (eval echo configure:1984: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1631: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_func_setpgrp_void=no
 else
@@ -2004,12 +1651,12 @@ EOF
 fi
 
 echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6
-echo "configure:2008: checking return type of signal handlers" >&5
+echo "configure:1655: checking return type of signal handlers" >&5
 if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2013 "configure"
+#line 1660 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #include <signal.h>
@@ -2026,7 +1673,7 @@ int main() {
 int i;
 ; return 0; }
 EOF
-if { (eval echo configure:2030: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1677: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_type_signal=void
 else
@@ -2047,12 +1694,12 @@ EOF
 for ac_func in socket strdup strerror strspn
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2051: checking for $ac_func" >&5
+echo "configure:1698: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2056 "configure"
+#line 1703 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -2075,7 +1722,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:2079: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1726: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -2101,12 +1748,12 @@ done
 
 
 echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:2105: checking for ANSI C header files" >&5
+echo "configure:1752: checking for ANSI C header files" >&5
 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2110 "configure"
+#line 1757 "configure"
 #include "confdefs.h"
 #include <stdlib.h>
 #include <stdarg.h>
@@ -2114,7 +1761,7 @@ else
 #include <float.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2118: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1765: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -2131,7 +1778,7 @@ rm -f conftest*
 if test $ac_cv_header_stdc = yes; then
   # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
 cat > conftest.$ac_ext <<EOF
-#line 2135 "configure"
+#line 1782 "configure"
 #include "confdefs.h"
 #include <string.h>
 EOF
@@ -2149,7 +1796,7 @@ fi
 if test $ac_cv_header_stdc = yes; then
   # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
 cat > conftest.$ac_ext <<EOF
-#line 2153 "configure"
+#line 1800 "configure"
 #include "confdefs.h"
 #include <stdlib.h>
 EOF
@@ -2170,7 +1817,7 @@ if test "$cross_compiling" = yes; then
   :
 else
   cat > conftest.$ac_ext <<EOF
-#line 2174 "configure"
+#line 1821 "configure"
 #include "confdefs.h"
 #include <ctype.h>
 #define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
@@ -2181,7 +1828,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
 exit (0); }
 
 EOF
-if { (eval echo configure:2185: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1832: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   :
 else
@@ -2208,17 +1855,17 @@ for ac_hdr in fcntl.h sys/file.h sys/ioctl.h unistd.h zlib.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2212: checking for $ac_hdr" >&5
+echo "configure:1859: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2217 "configure"
+#line 1864 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2222: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1869: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -2248,17 +1895,17 @@ for ac_hdr in netax25/ax25.h netrom/netrom.h netrose/rose.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2252: checking for $ac_hdr" >&5
+echo "configure:1899: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2257 "configure"
+#line 1904 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2262: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1909: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -2286,12 +1933,12 @@ done
 
 
 echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:2290: checking for working const" >&5
+echo "configure:1937: checking for working const" >&5
 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2295 "configure"
+#line 1942 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -2340,7 +1987,7 @@ ccp = (char const *const *) p;
 
 ; return 0; }
 EOF
-if { (eval echo configure:2344: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1991: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_const=yes
 else
@@ -2520,10 +2167,7 @@ s%@build_vendor@%$build_vendor%g
 s%@build_os@%$build_os%g
 s%@LD@%$LD%g
 s%@NM@%$NM%g
-s%@USE_SYMBOL_UNDERSCORE@%$USE_SYMBOL_UNDERSCORE%g
 s%@LN_S@%$LN_S%g
-s%@DLLTOOL@%$DLLTOOL%g
-s%@AS@%$AS%g
 s%@LIBTOOL@%$LIBTOOL%g
 
 CEOF
diff --git a/configure.in b/configure.in
index 57a8bd5..ccb6216 100644
--- a/configure.in
+++ b/configure.in
@@ -2,12 +2,12 @@ dnl Process this file with autoconf to produce a configure script.
 AC_INIT(axlib.h)
 AXLIB_MAJOR_VERSION=0
 AXLIB_MINOR_VERSION=0
-AXLIB_MICRO_VERSION=3
+AXLIB_MICRO_VERSION=4
 AXLIB_VERSION=$AXLIB_MAJOR_VERSION.$AXLIB_MINOR_VERSION.$AXLIB_MICRO_VERSION
 
 # for automake
 VERSION=$AXLIB_VERSION
-PACKAGE=ax25-lib
+PACKAGE=libax25
 
 AM_INIT_AUTOMAKE($PACKAGE, $VERSION)
 AM_CONFIG_HEADER(config.h)
diff --git a/ltconfig b/ltconfig
index ab304fd..e3c5a95 100755
--- a/ltconfig
+++ b/ltconfig
@@ -2,7 +2,7 @@
 
 # ltconfig - Create a system-specific libtool.
 # Copyright (C) 1996-1999 Free Software Foundation, Inc.
-# Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
 #
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -32,12 +32,8 @@ if test "X$1" = X--no-reexec; then
   # Discard the --no-reexec flag, and continue.
   shift
 elif test "X$1" = X--fallback-echo; then
-  # used as fallback echo
-  shift
-  cat <<EOF
-$*
-EOF
-  exit 0
+  # Avoid inline document here, it may be left over
+  :
 elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
   # Yippee, $echo works!
   :
@@ -46,6 +42,15 @@ else
   exec "$SHELL" "$0" --no-reexec ${1+"$@"}
 fi
 
+if test "X$1" = X--fallback-echo; then
+  # used as fallback echo
+  shift
+  cat <<EOF
+$*
+EOF
+  exit 0
+fi
+
 # Find the correct PATH separator.  Usually this is `:', but
 # DJGPP uses `;' like DOS.
 if test "X${PATH_SEPARATOR+set}" != "Xset"; then
@@ -82,7 +87,7 @@ if test "X`($echo '\t') 2>/dev/null`" != 'X\t' ||
 
   IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
   for dir in $PATH /usr/ucb; do
-    if test -f $dir/echo &&
+    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
        test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
        test "X`($dir/echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then
       echo="$dir/echo"
@@ -97,7 +102,8 @@ if test "X`($echo '\t') 2>/dev/null`" != 'X\t' ||
        test "X`(print -r "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then
       # This shell has a builtin print -r that does the trick.
       echo='print -r'
-    elif test -f /bin/ksh && test "X$CONFIG_SHELL" != X/bin/ksh; then
+    elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
+	 test "X$CONFIG_SHELL" != X/bin/ksh; then
       # If we have ksh, try running ltconfig again with it.
       ORIGINAL_CONFIG_SHELL="${CONFIG_SHELL-/bin/sh}"
       export ORIGINAL_CONFIG_SHELL
@@ -163,8 +169,8 @@ progname=`$echo "X$0" | $Xsed -e 's%^.*/%%'`
 # Constants:
 PROGRAM=ltconfig
 PACKAGE=libtool
-VERSION=1.2f
-TIMESTAMP=" (1.385 1999/03/15 17:24:54)"
+VERSION=1.3
+TIMESTAMP=" (1.385.2.117 1999/04/29 13:07:13)"
 ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.c 1>&5'
 ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.c $LIBS 1>&5'
 rm="rm -f"
@@ -179,6 +185,7 @@ enable_shared=yes
 enable_static=yes
 enable_fast_install=yes
 enable_dlopen=unknown
+enable_win32_dll=no
 ltmain=
 silent=
 srcdir=
@@ -200,11 +207,14 @@ old_AR="$AR"
 old_CC="$CC"
 old_CFLAGS="$CFLAGS"
 old_CPPFLAGS="$CPPFLAGS"
+old_LDFLAGS="$LDFLAGS"
 old_LD="$LD"
 old_LN_S="$LN_S"
+old_LIBS="$LIBS"
 old_NM="$NM"
 old_RANLIB="$RANLIB"
 old_DLLTOOL="$DLLTOOL"
+old_OBJDUMP="$OBJDUMP"
 old_AS="$AS"
 
 # Parse the command line options.
@@ -235,7 +245,7 @@ Generate a system-specific libtool script.
     --disable-static       do not build static libraries
     --disable-fast-install do not optimize for fast installation
     --enable-dlopen        enable dlopen support
-    --enable-dlopen-self   enable support for dlopening programs
+    --enable-win32-dll     enable building dlls on win32 hosts
     --help                 display this help and exit
     --no-verify            do not verify that HOST is a valid host type
 -o, --output=FILE          specify the output file [default=$default_ofile]
@@ -269,6 +279,8 @@ EOM
 
   --enable-dlopen) enable_dlopen=yes ;;
 
+  --enable-win32-dll) enable_win32_dll=yes ;;
+
   --quiet | --silent) silent=yes ;;
 
   --srcdir) prev=srcdir ;;
@@ -463,6 +475,9 @@ old_postuninstall_cmds=
 # Set a sane default for `AR'.
 test -z "$AR" && AR=ar
 
+# Set a sane default for `OBJDUMP'.
+test -z "$OBJDUMP" && OBJDUMP=objdump
+
 # If RANLIB is not set, then run the test.
 if test "${RANLIB+set}" != "set"; then
   result=no
@@ -471,7 +486,7 @@ if test "${RANLIB+set}" != "set"; then
   IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
   for dir in $PATH; do
     test -z "$dir" && dir=.
-    if test -f $dir/ranlib; then
+    if test -f $dir/ranlib || test -f $dir/ranlib$ac_exeext; then
       RANLIB="ranlib"
       result="ranlib"
       break
@@ -487,8 +502,9 @@ if test -n "$RANLIB"; then
   old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
 fi
 
-# Set sane defaults for `DLLTOOL' and `AS', used on cygwin.
+# Set sane defaults for `DLLTOOL', `OBJDUMP', and `AS', used on cygwin.
 test -z "$DLLTOOL" && DLLTOOL=dlltool
+test -z "$OBJDUMP" && OBJDUMP=objdump
 test -z "$AS" && AS=as
 
 # Check to see if we are using GCC.
@@ -498,9 +514,8 @@ if test "$with_gcc" != yes || test -z "$CC"; then
     echo $ac_n "checking for gcc... $ac_c" 1>&6
     IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
     for dir in $PATH; do
-      IFS="$save_ifs"
       test -z "$dir" && dir=.
-      if test -f $dir/gcc; then
+      if test -f $dir/gcc || test -f $dir/gcc$ac_exeext; then
 	CC="gcc"
 	break
       fi
@@ -521,7 +536,7 @@ if test "$with_gcc" != yes || test -z "$CC"; then
     cc_rejected=no
     for dir in $PATH; do
       test -z "$dir" && dir=.
-      if test -f $dir/cc; then
+      if test -f $dir/cc || test -f $dir/cc$ac_exeext; then
 	if test "$dir/cc" = "/usr/ucb/cc"; then
 	  cc_rejected=yes
 	  continue
@@ -561,7 +576,7 @@ if test "$with_gcc" != yes || test -z "$CC"; then
   # Now see if the compiler is really GCC.
   with_gcc=no
   echo $ac_n "checking whether we are using GNU C... $ac_c" 1>&6
-  echo "$progname:564: checking whether we are using GNU C" >&5
+  echo "$progname:579: checking whether we are using GNU C" >&5
 
   $rm conftest.c
   cat > conftest.c <<EOF
@@ -569,7 +584,7 @@ if test "$with_gcc" != yes || test -z "$CC"; then
   yes;
 #endif
 EOF
-  if { ac_try='${CC-cc} -E conftest.c'; { (eval echo $progname:572: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+  if { ac_try='${CC-cc} -E conftest.c'; { (eval echo $progname:587: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
     with_gcc=yes
   fi
   $rm conftest.c
@@ -583,8 +598,8 @@ compiler="$2"
 echo $ac_n "checking for object suffix... $ac_c" 1>&6
 $rm conftest*
 echo 'int i = 1;' > conftest.c
-echo "$progname:586: checking for object suffix" >& 5
-if { (eval echo $progname:587: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; }; then
+echo "$progname:601: checking for object suffix" >& 5
+if { (eval echo $progname:602: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; }; then
   # Append any warnings to the config.log.
   cat conftest.err 1>&5
 
@@ -688,7 +703,7 @@ else
     wl='-Qoption ld '
     ;;
 
-  sysv4.2uw2* | sysv4.3* | sysv5*)
+  sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
     pic_flag='-KPIC'
     link_static_flag='-Bstatic'
     wl='-Wl,'
@@ -714,8 +729,8 @@ if test -n "$pic_flag"; then
   echo "int some_variable = 0;" > conftest.c
   save_CFLAGS="$CFLAGS"
   CFLAGS="$CFLAGS $pic_flag -DPIC"
-  echo "$progname:717: checking if $compiler PIC flag $pic_flag works" >&5
-  if { (eval echo $progname:718: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.$objext; then
+  echo "$progname:732: checking if $compiler PIC flag $pic_flag works" >&5
+  if { (eval echo $progname:733: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.$objext; then
     # Append any warnings to the config.log.
     cat conftest.err 1>&5
     
@@ -753,16 +768,26 @@ fi
 
 # Check to see if options -o and -c are simultaneously supported by compiler
 echo $ac_n "checking if $compiler supports -c -o file.o... $ac_c" 1>&6
+$rm -r conftest 2>/dev/null
+mkdir conftest
+cd conftest
 $rm conftest*
 echo "int some_variable = 0;" > conftest.c
+mkdir out
+# According to Tom Tromey, Ian Lance Taylor reported there are C compilers
+# that will create temporary files in the current directory regardless of
+# the output directory.  Thus, making CWD read-only will cause this test
+# to fail, enabling locking or at least warning the user not to do parallel
+# builds.
+chmod -w .
 save_CFLAGS="$CFLAGS"
-CFLAGS="$CFLAGS -c -o conftest2.o"
-echo "$progname:760: checking if $compiler supports -c -o file.o" >&5
-if { (eval echo $progname:761: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest2.o; then
+CFLAGS="$CFLAGS -o out/conftest2.o"
+echo "$progname:785: checking if $compiler supports -c -o file.o" >&5
+if { (eval echo $progname:786: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.o; then
 
   # The compiler can only warn and ignore the option if not recognized
   # So say no if there are warnings
-    if test -s conftest.err; then
+    if test -s out/conftest.err; then
       echo "$ac_t"no 1>&6
       compiler_c_o=no
     else
@@ -771,12 +796,17 @@ if { (eval echo $progname:761: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conft
     fi
 else
   # Append any errors to the config.log.
-  cat conftest.err 1>&5
+  cat out/conftest.err 1>&5
   compiler_c_o=no
   echo "$ac_t"no 1>&6
 fi
 CFLAGS="$save_CFLAGS"
-$rm conftest*
+chmod u+w .
+$rm conftest* out/*
+rmdir out
+cd ..
+rmdir conftest
+$rm -r conftest 2>/dev/null
 
 if test x"$compiler_c_o" = x"yes"; then
   # Check to see if we can write to a .lo
@@ -785,8 +815,8 @@ if test x"$compiler_c_o" = x"yes"; then
   echo "int some_variable = 0;" > conftest.c
   save_CFLAGS="$CFLAGS"
   CFLAGS="$CFLAGS -c -o conftest.lo"
-  echo "$progname:788: checking if $compiler supports -c -o file.lo" >&5
-if { (eval echo $progname:789: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.lo; then
+  echo "$progname:818: checking if $compiler supports -c -o file.lo" >&5
+if { (eval echo $progname:819: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.lo; then
 
     # The compiler can only warn and ignore the option if not recognized
     # So say no if there are warnings
@@ -837,8 +867,8 @@ if test "$with_gcc" = yes; then
   echo "int some_variable = 0;" > conftest.c
   save_CFLAGS="$CFLAGS"
   CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.c"
-  echo "$progname:840: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
-  if { (eval echo $progname:841: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.o; then
+  echo "$progname:870: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+  if { (eval echo $progname:871: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.o; then
 
     # The compiler can only warn and ignore the option if not recognized
     # So say no if there are warnings
@@ -881,8 +911,8 @@ $rm conftest*
 echo 'main(){return(0);}' > conftest.c
 save_LDFLAGS="$LDFLAGS"
 LDFLAGS="$LDFLAGS $link_static_flag"
-echo "$progname:884: checking if $compiler static flag $link_static_flag works" >&5
-if { (eval echo $progname:885: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+echo "$progname:914: checking if $compiler static flag $link_static_flag works" >&5
+if { (eval echo $progname:915: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
   echo "$ac_t$link_static_flag" 1>&6
 else
   echo "$ac_t"none 1>&6
@@ -894,9 +924,9 @@ $rm conftest*
 if test -z "$LN_S"; then
   # Check to see if we can use ln -s, or we need hard links.
   echo $ac_n "checking whether ln -s works... $ac_c" 1>&6
-  $rm conftestdata
-  if ln -s X conftestdata 2>/dev/null; then
-    $rm conftestdata
+  $rm conftest.dat
+  if ln -s X conftest.dat 2>/dev/null; then
+    $rm conftest.dat
     LN_S="ln -s"
   else
     LN_S=ln
@@ -914,11 +944,11 @@ if test -z "$LD"; then
   if test "$with_gcc" = yes; then
     # Check if gcc -print-prog-name=ld gives a path.
     echo $ac_n "checking for ld used by GCC... $ac_c" 1>&6
-    echo "$progname:917: checking for ld used by GCC" >&5
+    echo "$progname:947: checking for ld used by GCC" >&5
     ac_prog=`($CC -print-prog-name=ld) 2>&5`
     case "$ac_prog" in
     # Accept absolute paths.
-    /* | [A-Za-z]:[\\/]*)
+    [\\/]* | [A-Za-z]:[\\/]*)
       re_direlt='/[^/][^/]*/\.\./'
       # Canonicalize the path of ld
       ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
@@ -938,17 +968,17 @@ if test -z "$LD"; then
     esac
   elif test "$with_gnu_ld" = yes; then
     echo $ac_n "checking for GNU ld... $ac_c" 1>&6
-    echo "$progname:941: checking for GNU ld" >&5
+    echo "$progname:971: checking for GNU ld" >&5
   else
     echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-    echo "$progname:944: checking for non-GNU ld" >&5
+    echo "$progname:974: checking for non-GNU ld" >&5
   fi
 
   if test -z "$LD"; then
     IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
     for ac_dir in $PATH; do
       test -z "$ac_dir" && ac_dir=.
-      if test -f "$ac_dir/$ac_prog"; then
+      if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
 	LD="$ac_dir/$ac_prog"
 	# Check to see if the program is GNU ld.  I'd rather use --version,
 	# but apparently some GNU ld's only accept -v.
@@ -1015,7 +1045,12 @@ include_expsyms=
 # it will be wrapped by ` (' and `)$', so one must not match beginning or
 # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
 # as well as any symbol that contains `d'.
-exclude_expsyms=
+exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
+# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+# platforms (ab)use it in PIC code, but their linkers get confused if
+# the symbol is explicitly referenced.  Since portable code cannot
+# rely on this symbol name, it's probably fine to never include it in
+# preloaded symbol tables.
 
 case "$host_os" in
 cygwin* | mingw*)
@@ -1027,10 +1062,6 @@ cygwin* | mingw*)
   fi
   ;;
 
-freebsd2* | sunos4*)
-  exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
-  ;;
-
 esac
 
 ld_shlibs=yes
@@ -1058,18 +1089,21 @@ EOF
     archive_cmds='$rm $objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $objdir/a2ixlibrary.data~$AR cru $lib $libobjs~$RANLIB $lib~(cd $objdir && a2ixlibrary -32)'
     hardcode_libdir_flag_spec='-L$libdir'
     hardcode_minus_L=yes
-    ;;
 
-  sunos4*)
-    archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linkopts'
-    wlarc=
-    hardcode_direct=yes
-    hardcode_minus_L=yes
-    hardcode_shlibpath_var=no
+    # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
+    # that the semantics of dynamic libraries on AmigaOS, at least up
+    # to version 4, is to share data among multiple programs linked
+    # with the same dynamic library.  Since this doesn't match the
+    # behavior of shared libraries on other platforms, we can use
+    # them.
+    ld_shlibs=no
     ;;
 
   beos*)
     if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+      allow_undefined_flag=unsupported
+      # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+      # support --undefined.  This deserves some investigation.  FIXME
       archive_cmds='$CC -nostart $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib'
     else
       ld_shlibs=no
@@ -1087,7 +1121,7 @@ EOF
     # then regenerate the def file from the symbol export list, so that
     # the compiled dll only exports the symbol export list.
     export_symbols_cmds='rm -f $objdir/$soname-ltdll.c~
-      sed -e "/^# \/\* ltdll.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $0 > $objdir/$soname-ltdll.c~
+      sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $0 > $objdir/$soname-ltdll.c~
       (cd $objdir && $CC -c $soname-ltdll.c)~
       $DLLTOOL --export-all --exclude-symbols DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12 --output-def $objdir/$soname-def  $objdir/$soname-ltdll.$objext $libobjs~
       sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]* ; *//" < $objdir/$soname-def > $export_symbols'
@@ -1095,7 +1129,7 @@ EOF
     archive_expsym_cmds='echo EXPORTS > $objdir/$soname-def~
       _lt_hint=1;
       for symbol in `cat $export_symbols`; do
-        echo "	\$symbol @ \$_lt_hint ; " >> $objdir/$soname-def;
+	echo "	\$symbol @ \$_lt_hint ; " >> $objdir/$soname-def;
 	_lt_hint=`expr 1 + \$_lt_hint`;
       done~
       $CC -Wl,--base-file,$objdir/$soname-base -Wl,--dll -nostartfiles -Wl,-e,__cygwin_dll_entry@12 -o $lib $objdir/$soname-ltdll.$objext $libobjs $deplibs $linkopts~
@@ -1107,6 +1141,23 @@ EOF
       old_archive_from_new_cmds='$DLLTOOL --as=$AS --dllname $soname --def $objdir/$soname-def --output-lib $objdir/$libname.a'
     ;;
 
+  netbsd*)
+    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+      archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib'
+      archive_expsym_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+    else
+      archive_cmds='$LD -Bshareable $libobjs $deplibs $linkopts -o $lib'
+      # can we support soname and/or expsyms with a.out? -oliva
+    fi
+    ;;
+
+  sunos4*)
+    archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linkopts'
+    wlarc=
+    hardcode_direct=yes
+    hardcode_shlibpath_var=no
+    ;;
+
   *)
     if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
       archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib'
@@ -1141,35 +1192,45 @@ else
     ;;
 
   aix4*)
-    allow_undefined_flag=
+    hardcode_libdir_flag_spec='${wl}-b ${wl}nolibpath ${wl}-b ${wl}libpath:$libdir:/usr/lib:/lib'
+    hardcode_libdir_separator=':'
     if test "$with_gcc" = yes; then
-      if strings `${CC} -print-prog-name=collect2` | \
-	 grep resolve_lib_name >/dev/null
+      collect2name=`${CC} -print-prog-name=collect2`
+      if test -f "$collect2name" && \
+	 strings "$collect2name" | grep resolve_lib_name >/dev/null
       then
 	# We have reworked collect2
 	hardcode_direct=yes
       else
 	# We have old collect2
 	hardcode_direct=unsupported
+	# It fails to find uninstalled libraries when the uninstalled
+	# path is not listed in the libpath.  Setting hardcode_minus_L
+	# to unsupported forces relinking
+	hardcode_minus_L=yes
+	hardcode_libdir_flag_spec='-L$libdir'
+	hardcode_libdir_separator=
       fi
-      archive_cmds='$CC -shared ${wl}-bnoentry -o $objdir/$soname $libobjs $deplibs $linkopts'
+      shared_flag='-shared'
     else
-      always_export_symbols=yes
-      archive_expsym_cmds='$CC -o $objdir/$soname $libobjs $deplibs $linkopts ${wl}-bE:$export_symbols ${wl}-bM:SRE ${wl}-bnoentry'
+      shared_flag='${wl}-bM:SRE'
       hardcode_direct=yes
     fi
-    hardcode_minus_L=yes
-    # Though LIBPATH variable hardcodes shlibpath into executable,
-    # it doesn't affect searching for -l* libraries; this confuses
-    # tests in mdemo.
-    hardcode_shlibpath_var=unsupported
-    hardcode_libdir_flag_spec='-L$libdir'
+    allow_undefined_flag=' ${wl}-berok'
+    archive_cmds="\$CC $shared_flag"' -o $objdir/$soname $libobjs $deplibs $linkopts ${wl}-bexpall ${wl}-bnoentry${allow_undefined_flag}'
+    archive_expsym_cmds="\$CC $shared_flag"' -o $objdir/$soname $libobjs $deplibs $linkopts ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}'
+    case "$host_os" in aix4.[01]|aix4.[01].*)
+      # According to Greg Wooledge, -bexpall is only supported from AIX 4.2 on
+      always_export_symbols=yes ;;
+    esac
    ;;
 
   amigaos*)
     archive_cmds='$rm $objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $objdir/a2ixlibrary.data~$AR cru $lib $libobjs~$RANLIB $lib~(cd $objdir && a2ixlibrary -32)'
     hardcode_libdir_flag_spec='-L$libdir'
     hardcode_minus_L=yes
+    # see comment about different semantics on the GNU ld section
+    ld_shlibs=no
     ;;
 
   cygwin* | mingw*)
@@ -1192,7 +1253,6 @@ else
 
   freebsd1*)
     ld_shlibs=no
-    can_build_shared=no
     ;;
 
   # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
@@ -1203,7 +1263,6 @@ else
     archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts /usr/lib/c++rt0.o'
     hardcode_libdir_flag_spec='-R$libdir'
     hardcode_direct=yes
-    hardcode_minus_L=no # verified on 2.2.6
     hardcode_shlibpath_var=no
     ;;
 
@@ -1220,31 +1279,27 @@ else
     archive_cmds='$CC -shared -o $lib $libobjs $deplibs $linkopts'
     hardcode_libdir_flag_spec='-R$libdir'
     hardcode_direct=yes
-    hardcode_minus_L=no
     hardcode_shlibpath_var=no
     ;;
 
-  hpux9*)
-    archive_cmds='$rm $objdir/$soname~$LD -b +s +b $install_libdir -o $objdir/$soname $libobjs $deplibs $linkopts~test $objdir/$soname = $lib || mv $objdir/$soname $lib'
-    hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-    hardcode_direct=yes
-    hardcode_minus_L=yes
-    export_dynamic_flag_spec='${wl}-E'
-    ;;
-
-  hpux10* | hpux11*)
-    archive_cmds='$LD -b +h $soname +s +b $install_libdir -o $lib $libobjs $deplibs $linkopts'
+  hpux9* | hpux10* | hpux11*)
+    case "$host_os" in
+    hpux9*) archive_cmds='$rm $objdir/$soname~$LD -b +b $install_libdir -o $objdir/$soname $libobjs $deplibs $linkopts~test $objdir/$soname = $lib || mv $objdir/$soname $lib' ;;
+    *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linkopts' ;;
+    esac
     hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+    hardcode_libdir_separator=:
     hardcode_direct=yes
-    hardcode_minus_L=yes
+    hardcode_minus_L=yes # Not in the search PATH, but as the default
+			 # location of the library.
     export_dynamic_flag_spec='${wl}-E'
     ;;
 
   irix5* | irix6*)
     if test "$with_gcc" = yes; then
-      archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
+      archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
     else
-      archive_cmds='$LD -shared $libobjs $deplibs $linkopts -soname $soname `test -n "$verstring" && echo -set_version $verstring` -o $lib'
+      archive_cmds='$LD -shared $libobjs $deplibs $linkopts -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
     fi
     hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
     hardcode_libdir_separator=:
@@ -1279,18 +1334,20 @@ else
   osf3* | osf4*)
     if test "$with_gcc" = yes; then
       allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-      archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $linkopts ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
+      archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $linkopts ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
     else
       allow_undefined_flag=' -expect_unresolved \*'
-      archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linkopts -soname $soname `test -n "$verstring" && echo -set_version $verstring` -o $lib'
+      archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linkopts -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
     fi
     hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
     hardcode_libdir_separator=:
     ;;
 
   sco3.2v5*)
-    archive_cmds='$LD -G -o $lib $libobjs $deplibs $linkopts'
-    hardcode_direct=yes
+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
+    hardcode_shlibpath_var=no
+    runpath_var=LD_RUN_PATH
+    hardcode_runpath_var=yes
     ;;
 
   solaris*)
@@ -1302,26 +1359,30 @@ else
 		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linkopts~$rm $lib.exp'
     hardcode_libdir_flag_spec='-R$libdir'
     hardcode_shlibpath_var=no
+    case "$host_os" in
+    solaris2.[0-5] | solaris2.[0-5].*) ;;
+    *) # Supported since Solaris 2.6 (maybe 2.5.1?)
+      whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' ;;
+    esac
     ;;
 
   sunos4*)
-    # Why do we need -Bstatic?  To avoid inter-library dependencies, maybe...
-    if test "$with_gcc" = yes; then
-      # Use -fPIC here because libgcc is multilibbed
-      archive_cmds='$CC -shared ${wl}-Bstatic -fPIC -o $lib $libobjs $deplibs $linkopts'
-    else
-      archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linkopts'
-    fi
+    archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linkopts'
     hardcode_libdir_flag_spec='-L$libdir'
     hardcode_direct=yes
     hardcode_minus_L=yes
     hardcode_shlibpath_var=no
     ;;
 
+  sysv4)
+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
+    runpath_var='LD_RUN_PATH'
+    hardcode_shlibpath_var=no
+    hardcode_direct=no #Motorola manual says yes, but my tests say they lie 
+    ;;  
+
   sysv4.3*)
     archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
-    hardcode_direct=no
-    hardcode_minus_L=no
     hardcode_shlibpath_var=no
     export_dynamic_flag_spec='-Bexport'
     ;;
@@ -1329,36 +1390,32 @@ else
   uts4*)
     archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
     hardcode_libdir_flag_spec='-L$libdir'
-    hardcode_direct=no
-    hardcode_minus_L=no
     hardcode_shlibpath_var=no
     ;;
 
   dgux*)
     archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
     hardcode_libdir_flag_spec='-L$libdir'
-    hardcode_direct=no
-    hardcode_minus_L=no
     hardcode_shlibpath_var=no
     ;;
 
   *)
     ld_shlibs=no
-    can_build_shared=no
     ;;
   esac
 fi
 echo "$ac_t$ld_shlibs" 1>&6
+test "$ld_shlibs" = no && can_build_shared=no
 
 if test -z "$NM"; then
   echo $ac_n "checking for BSD-compatible nm... $ac_c" 1>&6
   case "$NM" in
-  /* | [A-Za-z]:[/\\]*) ;; # Let the user override the test with a path.
+  [\\/]* | [A-Za-z]:[\\/]*) ;; # Let the user override the test with a path.
   *)
     IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
     for ac_dir in $PATH /usr/ucb /usr/ccs/bin /bin; do
       test -z "$ac_dir" && ac_dir=.
-      if test -f $ac_dir/nm; then
+      if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext; then
 	# Check to see if the nm accepts a BSD-compat flag.
 	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
 	#   nm: unknown option "B" ignored
@@ -1416,6 +1473,9 @@ irix*)
 solaris*)
   symcode='[BDT]'
   ;;
+sysv4)
+  symcode='[DFNSTU]'
+  ;;
 esac
 
 # If we're using GNU nm, then use its standard symbol codes.
@@ -1444,11 +1504,11 @@ void nm_test_func(){}
 main(){nm_test_var='a';nm_test_func();return(0);}
 EOF
 
-  echo "$progname:1447: checking if global_symbol_pipe works" >&5
-  if { (eval echo $progname:1448: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; } && test -s conftest.$objext; then
+  echo "$progname:1507: checking if global_symbol_pipe works" >&5
+  if { (eval echo $progname:1508: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; } && test -s conftest.$objext; then
     # Now try to grab the symbols.
     nlist=conftest.nm
-    if { echo "$progname:1451: eval \"$NM conftest.$objext | $global_symbol_pipe > $nlist\"" >&5; eval "$NM conftest.$objext | $global_symbol_pipe > $nlist 2>&5"; } && test -s "$nlist"; then
+    if { echo "$progname:1511: eval \"$NM conftest.$objext | $global_symbol_pipe > $nlist\"" >&5; eval "$NM conftest.$objext | $global_symbol_pipe > $nlist 2>&5"; } && test -s "$nlist"; then
 
       # Try sorting and uniquifying the output.
       if sort "$nlist" | uniq > "$nlist"T; then
@@ -1495,12 +1555,12 @@ EOF
 #endif
 EOF
 	  # Now try linking the two files.
-	  mv conftest.$objext conftestm.$objext
+	  mv conftest.$objext conftstm.$objext
 	  save_LIBS="$LIBS"
 	  save_CFLAGS="$CFLAGS"
-	  LIBS="conftestm.$objext"
+	  LIBS="conftstm.$objext"
 	  CFLAGS="$CFLAGS$no_builtin_flag"
-	  if { (eval echo $progname:1503: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+	  if { (eval echo $progname:1563: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
 	    pipe_works=yes
 	  else
 	    echo "$progname: failed program was:" >&5
@@ -1520,7 +1580,7 @@ EOF
     echo "$progname: failed program was:" >&5
     cat conftest.c >&5
   fi
-  $rm conftest*
+  $rm conftest* conftst*
 
   # Do not use the global_symbol_pipe unless it works.
   if test "$pipe_works" = yes; then
@@ -1529,7 +1589,11 @@ EOF
     global_symbol_pipe=
   fi
 done
-echo "$ac_t$pipe_works" 1>&6
+if test "$pipe_works" = yes; then
+  echo "${ac_t}ok" 1>&6
+else
+  echo "${ac_t}failed" 1>&6
+fi
 
 if test -z "$global_symbol_pipe"; then
   global_symbol_to_cdecl=
@@ -1542,10 +1606,12 @@ if test -n "$hardcode_libdir_flag_spec" || \
    test -n "$runpath_var"; then
 
   # We can hardcode non-existant directories.
-  if test "$hardcode_direct" != no && \
-     test "$hardcode_minus_L" != no && \
-     test "$hardcode_shlibpath_var" != no; then
-
+  if test "$hardcode_direct" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$hardcode_shlibpath_var" != no &&
+     test "$hardcode_minus_L" != no; then
     # Linking always hardcodes the temporary library directory.
     hardcode_action=relink
   else
@@ -1628,13 +1694,16 @@ beos*)
   library_names_spec='${libname}.so'
   dynamic_linker="$host_os ld.so"
   shlibpath_var=LIBRARY_PATH
+  lt_cv_dlopen="load_add_on"
+  lt_cv_dlopen_libs=
+  lt_cv_dlopen_self=yes
   ;;
 
 bsdi4*)
   version_type=linux
   library_names_spec='${libname}.so$major ${libname}.so'
   soname_spec='${libname}.so'
-  finish_cmds='PATH="$PATH:/sbin" ldconfig $libdir'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   deplibs_check_method='file_magic ELF 32-bit LSB shared object'
   file_magic_cmd=/usr/bin/file
@@ -1654,11 +1723,13 @@ cygwin* | mingw*)
     library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.lib'
   fi
   dynamic_linker='Win32 ld.exe'
-  deplibs_check_method='file_magic file format pei*-i386.*architecture: i386'
-  file_magic_cmd='objdump -f'
+  deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+  file_magic_cmd='${OBJDUMP} -f'
   need_lib_prefix=no
   # FIXME: first we should search . and the directory the executable is in
   shlibpath_var=PATH
+  lt_cv_dlopen="LoadLibrary"
+  lt_cv_dlopen_libs=
   ;;
 
 freebsd1*)
@@ -1683,7 +1754,7 @@ freebsd*)
       need_version=yes
       ;;
   esac
-  finish_cmds='PATH="$PATH:/sbin" OBJFORMAT="'"$objformat"'" ldconfig -m $libdir'
+  finish_cmds='PATH="\$PATH:/sbin" OBJFORMAT="'"$objformat"'" ldconfig -m $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   ;;
 
@@ -1701,46 +1772,43 @@ hpux9* | hpux10* | hpux11*)
   need_lib_prefix=no
   need_version=no
   shlibpath_var=SHLIB_PATH
+  shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
   library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl'
   soname_spec='${libname}${release}.sl$major'
   # HP-UX runs *really* slowly unless shared libraries are mode 555.
   postinstall_cmds='chmod 555 $lib'
   ;;
 
-irix5*)
-  version_type=irix
-  soname_spec='${libname}${release}.so'
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
-  shlibpath_var=LD_LIBRARY_PATH
-  deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" # or should it be pass_all?
-  file_magic_cmd=/usr/bin/file
-  file_magic_test_file=`echo /lib/libc.so*`
-  shlibpath_overrides_runpath=no
-  ;;
-
-irix6*)
+irix5* | irix6*)
   version_type=irix
   need_lib_prefix=no
   need_version=no
-  soname_spec='${libname}${release}.so'
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
-  case "$LD" in # libtool.m4 will add one of these switches to LD
-  *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;;
-  *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;;
-  *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;;
-  *) libsuff= shlibsuff= libmagic=never-match;;
+  soname_spec='${libname}${release}.so.$major'
+  library_names_spec='${libname}${release}.so.$versuffix ${libname}${release}.so.$major ${libname}${release}.so $libname.so'
+  case "$host_os" in
+  irix5*)
+    libsuff= shlibsuff=
+    # this will be overridden with pass_all, but let us keep it just in case
+    deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
+    ;;
+  *)
+    case "$LD" in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    # this will be overridden with pass_all, but let us keep it just in case
+    deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
+    ;;
   esac
   shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
   shlibpath_overrides_runpath=no
-  # even though /usr/local/lib is always searched, the man-page says
-  # shared libraries should not be installed there if they use an ABI
-  # different from -32, so we'd better not search for shared libraries
-  # there either
-  sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
-  sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
-  deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1" # or should it be pass_all?
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
   file_magic_cmd=/usr/bin/file
   file_magic_test_file=`echo /lib${libsuff}/libc.so*`
+  deplibs_check_method='pass_all'
   ;;
 
 # No shared lib support for Linux oldld, aout, or coff.
@@ -1755,7 +1823,7 @@ linux-gnu*)
   need_version=no
   library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
   soname_spec='${libname}${release}.so$major'
-  finish_cmds='PATH="$PATH:/sbin" ldconfig -n $libdir'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
   deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
@@ -1777,7 +1845,7 @@ netbsd*)
   version_type=sunos
   if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
     library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
-    finish_cmds='PATH="$PATH:/sbin" ldconfig -m $libdir'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
     dynamic_linker='NetBSD (a.out) ld.so'
   else
     library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so'
@@ -1808,17 +1876,15 @@ os2*)
 
 osf3* | osf4*)
   version_type=osf
+  need_version=no
   soname_spec='${libname}${release}.so'
   library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
   shlibpath_var=LD_LIBRARY_PATH
-  # deplibs_check_method='pass_all'
-  # Although pass_all appears to work, it copies symbols from static libraries
-  # into shared ones and exports them.  So, when a program is linked with two
-  # or more libraries that have got copies of the same symbols, link fails
-  # This was only tested on osf4:
+  # this will be overridden with pass_all, but let us keep it just in case
   deplibs_check_method='file_magic COFF format alpha shared library'
   file_magic_cmd=/usr/bin/file
   file_magic_test_file=/shlib/libc.so
+  deplibs_check_method='pass_all'
   sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
   sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
   ;;
@@ -1857,7 +1923,7 @@ sunos4*)
   need_version=yes
   ;;
 
-sysv4.2uw2* | sysv4.3* | sysv5*)
+sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
   version_type=linux
   library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
   soname_spec='${libname}${release}.so$major'
@@ -1866,6 +1932,15 @@ sysv4.2uw2* | sysv4.3* | sysv5*)
     ncr)
       deplibs_check_method='pass_all'
       ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+      file_magic_cmd=/usr/bin/file
+      file_magic_test_file=`echo /usr/lib/libc.so*`
+      ;;
   esac
   ;;
 
@@ -1895,6 +1970,17 @@ test "$dynamic_linker" = no && can_build_shared=no
 # Report the final consequences.
 echo "checking if libtool supports shared libraries... $can_build_shared" 1>&6
 
+# Only try to build win32 dlls if AC_LIBTOOL_WIN32_DLL was used in
+# configure.in, otherwise build static only libraries.
+case "$host_os" in
+cygwin* | mingw* | os2*)
+  if test x$can_build_shared = xyes; then
+    test x$enable_win32_dll = xno && can_build_shared=no
+    echo "checking if package supports dlls... $can_build_shared" 1>&6
+  fi
+;;
+esac
+
 if test -n "$file_magic_test_file" && test -n "$file_magic_cmd"; then
   case "$deplibs_check_method" in
   "file_magic "*)
@@ -1974,12 +2060,12 @@ else
 if eval "test \"`echo '$''{'lt_cv_dlopen'+set}'`\" != set"; then
   lt_cv_dlopen=no lt_cv_dlopen_libs=
 echo $ac_n "checking for dlopen""... $ac_c" 1>&6
-echo "$progname:1977: checking for dlopen" >&5
+echo "$progname:2063: checking for dlopen" >&5
 if eval "test \"`echo '$''{'ac_cv_func_dlopen'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1982 "ltconfig"
+#line 2068 "ltconfig"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char dlopen(); below.  */
 #include <assert.h>
@@ -2001,7 +2087,7 @@ dlopen();
 
 ; return 0; }
 EOF
-if { (eval echo $progname:2004: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo $progname:2090: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_dlopen=yes"
 else
@@ -2019,7 +2105,7 @@ if eval "test \"`echo '$ac_cv_func_'dlopen`\" = yes"; then
 else
   echo "$ac_t""no" 1>&6
 echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
-echo "$progname:2022: checking for dlopen in -ldl" >&5
+echo "$progname:2108: checking for dlopen in -ldl" >&5
 ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -2027,7 +2113,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-ldl  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 2030 "ltconfig"
+#line 2116 "ltconfig"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
@@ -2037,7 +2123,7 @@ int main() {
 dlopen()
 ; return 0; }
 EOF
-if { (eval echo $progname:2040: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo $progname:2126: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -2056,7 +2142,7 @@ if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
 else
   echo "$ac_t""no" 1>&6
 echo $ac_n "checking for dld_link in -ldld""... $ac_c" 1>&6
-echo "$progname:2059: checking for dld_link in -ldld" >&5
+echo "$progname:2145: checking for dld_link in -ldld" >&5
 ac_lib_var=`echo dld'_'dld_link | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -2064,7 +2150,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-ldld  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 2067 "ltconfig"
+#line 2153 "ltconfig"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
@@ -2074,7 +2160,7 @@ int main() {
 dld_link()
 ; return 0; }
 EOF
-if { (eval echo $progname:2077: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo $progname:2163: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -2093,12 +2179,12 @@ if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
 else
   echo "$ac_t""no" 1>&6
 echo $ac_n "checking for shl_load""... $ac_c" 1>&6
-echo "$progname:2096: checking for shl_load" >&5
+echo "$progname:2182: checking for shl_load" >&5
 if eval "test \"`echo '$''{'ac_cv_func_shl_load'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2101 "ltconfig"
+#line 2187 "ltconfig"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char shl_load(); below.  */
 #include <assert.h>
@@ -2120,7 +2206,7 @@ shl_load();
 
 ; return 0; }
 EOF
-if { (eval echo $progname:2123: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo $progname:2209: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_shl_load=yes"
 else
@@ -2137,54 +2223,47 @@ if eval "test \"`echo '$ac_cv_func_'shl_load`\" = yes"; then
   lt_cv_dlopen="shl_load"
 else
   echo "$ac_t""no" 1>&6
-echo $ac_n "checking for LoadLibrary""... $ac_c" 1>&6
-echo "$progname:2141: checking for LoadLibrary" >&5
-if eval "test \"`echo '$''{'ac_cv_func_LoadLibrary'+set}'`\" = set"; then
+echo $ac_n "checking for shl_load in -ldld""... $ac_c" 1>&6
+echo "$progname:2227: checking for shl_load in -ldld" >&5
+ac_lib_var=`echo dld'_'shl_load | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
-  cat > conftest.$ac_ext <<EOF
-#line 2146 "ltconfig"
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char LoadLibrary(); below.  */
-#include <assert.h>
+  ac_save_LIBS="$LIBS"
+LIBS="-ldld  $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 2235 "ltconfig"
+#include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
-char LoadLibrary();
+char shl_load();
 
 int main() {
-
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_LoadLibrary) || defined (__stub___LoadLibrary)
-choke me
-#else
-LoadLibrary();
-#endif
-
+shl_load()
 ; return 0; }
 EOF
-if { (eval echo $progname:2168: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo $progname:2246: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
-  eval "ac_cv_func_LoadLibrary=yes"
+  eval "ac_cv_lib_$ac_lib_var=yes"
 else
   echo "$progname: failed program was:" >&5
   cat conftest.$ac_ext >&5
   rm -rf conftest*
-  eval "ac_cv_func_LoadLibrary=no"
+  eval "ac_cv_lib_$ac_lib_var=no"
 fi
 rm -f conftest*
-fi
+LIBS="$ac_save_LIBS"
 
-if eval "test \"`echo '$ac_cv_func_'LoadLibrary`\" = yes"; then
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
   echo "$ac_t""yes" 1>&6
-  lt_cv_dlopen="LoadLibrary"
+  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
 else
   echo "$ac_t""no" 1>&6
 fi
 
-      
+
 fi
 
     
@@ -2207,17 +2286,17 @@ fi
 for ac_hdr in dlfcn.h; do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "$progname:2210: checking for $ac_hdr" >&5
+echo "$progname:2289: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2215 "ltconfig"
+#line 2294 "ltconfig"
 #include <$ac_hdr>
 int fnord = 0;
 EOF
 ac_try="$ac_compile conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo $progname:2220: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo $progname:2299: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -2245,7 +2324,7 @@ done
     LIBS="$lt_cv_dlopen_libs $LIBS"
 
   echo $ac_n "checking whether a program can dlopen itself""... $ac_c" 1>&6
-echo "$progname:2248: checking whether a program can dlopen itself" >&5
+echo "$progname:2327: checking whether a program can dlopen itself" >&5
 if test "${lt_cv_dlopen_self+set}" = set; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2253,7 +2332,7 @@ else
     lt_cv_dlopen_self=cross
   else
     cat > conftest.c <<EOF
-#line 2256 "ltconfig"
+#line 2335 "ltconfig"
 
 #if HAVE_DLFCN_H
 #include <dlfcn.h>
@@ -2299,7 +2378,7 @@ main() { void *self, *ptr1, *ptr2; self=dlopen(0,LTDL_GLOBAL|LTDL_LAZY_OR_NOW);
 	       if(ptr1 || ptr2) exit(0); } exit(1); } 
 
 EOF
-if { (eval echo $progname:2302: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo $progname:2381: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
 then
   lt_cv_dlopen_self=yes
 else
@@ -2318,7 +2397,7 @@ echo "$ac_t""$lt_cv_dlopen_self" 1>&6
   if test "$lt_cv_dlopen_self" = yes; then
     LDFLAGS="$LDFLAGS $link_static_flag"
   echo $ac_n "checking whether a statically linked program can dlopen itself""... $ac_c" 1>&6
-echo "$progname:2321: checking whether a statically linked program can dlopen itself" >&5
+echo "$progname:2400: checking whether a statically linked program can dlopen itself" >&5
 if test "${lt_cv_dlopen_self_static+set}" = set; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2326,7 +2405,7 @@ else
     lt_cv_dlopen_self_static=cross
   else
     cat > conftest.c <<EOF
-#line 2329 "ltconfig"
+#line 2408 "ltconfig"
 
 #if HAVE_DLFCN_H
 #include <dlfcn.h>
@@ -2372,7 +2451,7 @@ main() { void *self, *ptr1, *ptr2; self=dlopen(0,LTDL_GLOBAL|LTDL_LAZY_OR_NOW);
     if(ptr1 || ptr2) exit(0); } exit(1); } 
 
 EOF
-if { (eval echo $progname:2375: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo $progname:2454: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
 then
   lt_cv_dlopen_self_static=yes
 else
@@ -2416,8 +2495,10 @@ LTCONFIG_VERSION="$VERSION"
 case "$ltmain" in
 *.sh)
   # Now quote all the things that may contain metacharacters.
-  for var in ltecho old_CC old_CFLAGS old_CPPFLAGS old_LD old_NM old_RANLIB \
-    old_LN_S old_DLLTOOL old_AS AR CC LD LN_S NM LTSHELL LTCONFIG_VERSION \
+  for var in ltecho old_CC old_CFLAGS old_CPPFLAGS \
+    old_LD old_LDFLAGS old_LIBS \
+    old_NM old_RANLIB old_LN_S old_DLLTOOL old_OBJDUMP old_AS \
+    AR CC LD LN_S NM LTSHELL LTCONFIG_VERSION \
     reload_flag reload_cmds wl \
     pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \
     thread_safe_flag_spec whole_archive_flag_spec libname_spec \
@@ -2497,8 +2578,9 @@ EOF
 
 *)
   # Double-quote the variables that need it (for aesthetics).
-  for var in old_CC old_CFLAGS old_CPPFLAGS old_LD old_NM old_RANLIB \
-    old_LN_S old_DLLTOOL old_AS; do
+  for var in old_CC old_CFLAGS old_CPPFLAGS \
+    old_LD old_LDFLAGS old_LIBS \
+    old_NM old_RANLIB old_LN_S old_DLLTOOL old_OBJDUMP old_AS; do
     eval "$var=\\\"\$var\\\""
   done
 
@@ -2518,8 +2600,9 @@ cat <<EOF >> "$cfgfile"
 # Libtool was configured as follows, on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
 #
 # CC=$old_CC CFLAGS=$old_CFLAGS CPPFLAGS=$old_CPPFLAGS \\
-# LD=$old_LD NM=$old_NM RANLIB=$old_RANLIB LN_S=$old_LN_S \\
-# DLLTOOL="$old_DLLTOOL" AS="$old_AS" \\
+# LD=$old_LD LDFLAGS=$old_LDFLAGS LIBS=$old_LIBS \\
+# NM=$old_NM RANLIB=$old_RANLIB LN_S=$old_LN_S \\
+# DLLTOOL=$old_DLLTOOL OBJDUMP=$old_OBJDUMP AS=$old_AS \\
 #   $0$ltconfig_args
 #
 # Compiler and other test output produced by $progname, useful for
@@ -2565,6 +2648,9 @@ NM=$NM
 # Used on cygwin: DLL creation program.
 DLLTOOL="$DLLTOOL"
 
+# Used on cygwin: object dumper.
+OBJDUMP="$OBJDUMP"
+
 # Used on cygwin: assembler.
 AS="$AS"
 
@@ -2587,7 +2673,7 @@ libext="$libext"
 # Additional compiler flags for building library objects.
 pic_flag=$pic_flag
 
-# Does compiler simultaneously support -c and -o options
+# Does compiler simultaneously support -c and -o options?
 compiler_c_o=$compiler_c_o
 
 # Can we write directly to a .lo ?
@@ -2657,7 +2743,7 @@ postuninstall_cmds=$postuninstall_cmds
 # Method to check whether dependent libraries are shared objects.
 deplibs_check_method=$deplibs_check_method
 
-# Command to use when deplibs_check_method == file_magic
+# Command to use when deplibs_check_method == file_magic.
 file_magic_cmd=$file_magic_cmd
 
 # Flag that allows shared libraries with undefined symbols to be built.
@@ -2718,16 +2804,16 @@ sys_lib_dlsearch_path_spec=$sys_lib_dlsearch_path_spec
 # Fix the shell variable \$srcfile for the compiler.
 fix_srcfile_path="$fix_srcfile_path"
 
-# Set to yes if exported symbols are required
+# Set to yes if exported symbols are required.
 always_export_symbols=$always_export_symbols
 
-# The command to extract exported symbols
+# The commands to list exported symbols.
 export_symbols_cmds=$export_symbols_cmds
 
-# Symbols that should not be listed in the preloaded symbols
+# Symbols that should not be listed in the preloaded symbols.
 exclude_expsyms=$exclude_expsyms
 
-# Symbols that must always be exported
+# Symbols that must always be exported.
 include_expsyms=$include_expsyms
 
 EOF
diff --git a/ltmain.sh b/ltmain.sh
index a13c0b0..f1b9986 100644
--- a/ltmain.sh
+++ b/ltmain.sh
@@ -2,7 +2,7 @@
 # NOTE: Changing this file will not affect anything until you rerun ltconfig.
 #
 # Copyright (C) 1996-1999 Free Software Foundation, Inc.
-# Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -28,12 +28,8 @@ if test "X$1" = X--no-reexec; then
   # Discard the --no-reexec flag, and continue.
   shift
 elif test "X$1" = X--fallback-echo; then
-  # used as fallback echo
-  shift
-  cat <<EOF
-$*
-EOF
-  exit 0
+  # Avoid inline document here, it may be left over
+  :
 elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
   # Yippee, $echo works!
   :
@@ -42,6 +38,15 @@ else
   exec $SHELL "$0" --no-reexec ${1+"$@"}
 fi
 
+if test "X$1" = X--fallback-echo; then
+  # used as fallback echo
+  shift
+  cat <<EOF
+$*
+EOF
+  exit 0
+fi
+
 # The name of this program.
 progname=`$echo "$0" | sed 's%^.*/%%'`
 modename="$progname"
@@ -49,8 +54,8 @@ modename="$progname"
 # Constants.
 PROGRAM=ltmain.sh
 PACKAGE=libtool
-VERSION=1.2f
-TIMESTAMP=" (1.385 1999/03/15 17:24:54)"
+VERSION=1.3
+TIMESTAMP=" (1.385.2.117 1999/04/29 13:07:13)"
 
 default_mode=
 help="Try \`$progname --help' for more information."
@@ -100,6 +105,7 @@ show="$echo"
 show_help=
 execute_dlfiles=
 lo2o="s/\\.lo\$/.${objext}/"
+o2lo="s/\\.${objext}\$/.lo/"
 
 # Parse our command line options once, thoroughly.
 while test $# -gt 0
@@ -630,7 +636,13 @@ compiler."
 # #undef WIN32_LEAN_AND_MEAN
 # #include <stdio.h>
 #
+# #ifdef __cplusplus
+# extern "C" {
+# #endif
 # BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
+# #ifdef __cplusplus
+# }
+# #endif
 #
 # #include <cygwin/cygwin_dll.h>
 # DECLARE_CYGWIN_DLL( DllMain );
@@ -815,6 +827,7 @@ compiler."
     ltlibs=
     module=no
     objs=
+    prefer_static_libs=no
     preload=no
     prev=
     prevarg=
@@ -831,11 +844,21 @@ compiler."
     do
       case "$arg" in
       -all-static | -static)
-	if test "X$arg" = "X-all-static" && test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
+	if test "X$arg" = "X-all-static"; then
+	  if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
 	    $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
+	  fi
+	  if test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	else
+	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
 	fi
 	build_libtool_libs=no
 	build_old_libs=yes
+	prefer_static_libs=yes
 	break
 	;;
       esac
@@ -873,13 +896,19 @@ compiler."
 	      dlself=yes
 	    elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
 	      dlself=yes
+	    else
+	      dlself=needless
+	      export_dynamic=yes
 	    fi
 	    prev=
 	    continue
 	    ;;
 	  *)
-	    dlprefiles="$dlprefiles $arg"
-	    test "$prev" = dlfiles && dlfiles="$dlfiles $arg"
+	    if test "$prev" = dlfiles; then
+	      dlfiles="$dlfiles $arg"
+	    else
+	      dlprefiles="$dlprefiles $arg"
+	    fi
 	    prev=
 	    ;;
 	  esac
@@ -903,13 +932,26 @@ compiler."
 	  prev=
 	  continue
 	  ;;
-	rpath)
-	  rpath="$rpath $arg"
-	  prev=
-	  continue
-	  ;;
-	xrpath)
-	  xrpath="$xrpath $arg"
+	rpath | xrpath)
+	  # We need an absolute path.
+	  case "$arg" in
+	  [\\/]* | [A-Za-z]:[\\/]*) ;;
+	  *)
+	    $echo "$modename: only absolute run-paths are allowed" 1>&2
+	    exit 1
+	    ;;
+	  esac
+	  if test "$prev" = rpath; then
+	    case "$rpath " in
+	    *" $arg "*) ;;
+	    *) rpath="$rpath $arg" ;;
+	    esac
+	  else
+	    case "$xrpath " in
+	    *" $arg "*) ;;
+	    *) xrpath="$xrpath $arg" ;;
+	    esac
+	  fi
 	  prev=
 	  continue
 	  ;;
@@ -928,7 +970,6 @@ compiler."
 	if test -n "$link_static_flag"; then
 	  compile_command="$compile_command $link_static_flag"
 	  finalize_command="$finalize_command $link_static_flag"
-	  dlopen_self=$dlopen_self_static
 	fi
 	continue
 	;;
@@ -955,22 +996,16 @@ compiler."
 	;;
 
       -export-dynamic)
-	if test "$export_dynamic" != yes; then
-	  export_dynamic=yes
-	  if test -n "$export_dynamic_flag_spec"; then
-	    eval arg=\"$export_dynamic_flag_spec\"
-	  else
-	    arg=
-	  fi
-	fi
+	export_dynamic=yes
+	continue
 	;;
 
       -export-symbols | -export-symbols-regex)
 	if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
-	  $echo "$modename: cannot have more than one -exported-symbols"
+	  $echo "$modename: not more than one -exported-symbols argument allowed"
 	  exit 1
 	fi
-	if test "$arg" = "-export-symbols"; then
+	if test "X$arg" = "X-export-symbols"; then
 	  prev=expsyms
 	else
 	  prev=expsyms_regex
@@ -979,14 +1014,17 @@ compiler."
 	;;
 
       -L*)
-	dir=`$echo "X$arg" | $Xsed -e 's%^-L\(.*\)$%\1%'`
+	dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
+	# We need an absolute path.
 	case "$dir" in
-	/* | [A-Za-z]:[/\\]*)
-	  # Add the corresponding hardcode_libdir_flag, if it is not identical.
-	  ;;
+	[\\/]* | [A-Za-z]:[\\/]*) ;;
 	*)
-	  $echo "$modename: \`-L$dir' cannot specify a relative directory" 1>&2
-	  exit 1
+	  absdir=`cd "$dir" && pwd`
+	  if test -z "$absdir"; then
+	    $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
+	    exit 1
+	  fi
+	  dir="$absdir"
 	  ;;
 	esac
 	case " $deplibs " in
@@ -1010,20 +1048,29 @@ compiler."
 	;;
 
       -l*)
+	if test "$arg" = "-lc"; then
+	  case "$host" in
+	  *-*-cygwin* | *-*-mingw* | *-*-os2* | *-*-beos*)
+	    # These systems don't actually have c library (as such)
+	    continue
+	    ;;
+	  esac
+	elif test "$arg" = "-lm"; then
+	  case "$host" in
+	  *-*-cygwin* | *-*-beos*)
+	    # These systems don't actually have math library (as such)
+	    continue
+	    ;;
+	  esac
+	fi
 	deplibs="$deplibs $arg"
 	;;
 
       -module)
-	if test "$module" != yes; then
-	  module=yes
-	  if test -n "$export_dynamic_flag_spec"; then
-	    eval arg=\"$export_dynamic_flag_spec\"
-	  else
-	    arg=
-	  fi
-	fi
+	module=yes
+	continue
 	;;
-	
+
       -no-undefined)
 	allow_undefined=no
 	continue
@@ -1047,7 +1094,19 @@ compiler."
 	;;
 
       -R*)
-	xrpath="$xrpath "`$echo "X$arg" | $Xsed -e 's/^-R//'`
+	dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`
+	# We need an absolute path.
+	case "$dir" in
+	[\\/]* | [A-Za-z]:[\\/]*) ;;
+	*)
+	  $echo "$modename: only absolute run-paths are allowed" 1>&2
+	  exit 1
+	  ;;
+	esac
+	case "$xrpath " in
+	*" $dir "*) ;;
+	*) xrpath="$xrpath $dir" ;;
+	esac
 	continue
 	;;
 
@@ -1056,7 +1115,6 @@ compiler."
 	if test -z "$pic_flag" && test -n "$link_static_flag"; then
 	  compile_command="$compile_command $link_static_flag"
 	  finalize_command="$finalize_command $link_static_flag"
-	  dlopen_self=$dlopen_self_static
 	fi
 	continue
 	;;
@@ -1128,6 +1186,7 @@ compiler."
 	# it will not redefine variable installed.
 	installed=yes
 
+	# Read the .la file
 	# If there is no directory component, then add one.
 	case "$arg" in
 	*/* | *\\*) . $arg ;;
@@ -1218,7 +1277,8 @@ compiler."
 	  prev=
 	fi
 
-	if test "$build_libtool_libs" = yes && test -n "$library_names"; then
+	if test -n "$library_names" &&
+	   { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
 	  link_against_libtool_libs="$link_against_libtool_libs $arg"
 	  if test -n "$shlibpath_var"; then
 	    # Make sure the rpath contains only unique directories.
@@ -1230,11 +1290,11 @@ compiler."
 
 	  # We need an absolute path.
 	  case "$dir" in
-	  /* | [A-Za-z]:[/\\]*) absdir="$dir" ;;
+	  [\\/] | [A-Za-z]:[\\/]*) absdir="$dir" ;;
 	  *)
 	    absdir=`cd "$dir" && pwd`
 	    if test -z "$absdir"; then
-	      $echo "$modename: cannot determine absolute directory name of \`$libdir'" 1>&2
+	      $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
 	      exit 1
 	    fi
 	    ;;
@@ -1244,24 +1304,24 @@ compiler."
 	  # Skip directories that are in the system default run-time
 	  # search path, unless they have been requested with -R.
 	  case " $sys_lib_dlsearch_path " in
- 	  *" $absdir "*) ;;
+	  *" $absdir "*) ;;
 	  *)
 	    case "$compile_rpath " in
 	    *" $absdir "*) ;;
 	    *) compile_rpath="$compile_rpath $absdir" 
 	    esac
 	    ;;
- 	  esac
+	  esac
 
 	  case " $sys_lib_dlsearch_path " in
- 	  *" $libdir "*) ;;
+	  *" $libdir "*) ;;
 	  *)
 	    case "$finalize_rpath " in
 	    *" $libdir "*) ;;
 	    *) finalize_rpath="$finalize_rpath $libdir"
 	    esac
 	    ;;
- 	  esac
+	  esac
 
 	  lib_linked=yes
 	  case "$hardcode_action" in
@@ -1419,6 +1479,12 @@ compiler."
       exit 1
     fi
 
+    if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
+      eval arg=\"$export_dynamic_flag_spec\"
+      compile_command="$compile_command $arg"
+      finalize_command="$finalize_command $arg"
+    fi
+
     oldlibs=
     # calculate the name of the file, without its directory
     outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
@@ -1441,7 +1507,7 @@ compiler."
 	$echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2
       fi
 
-      if test -n "$dlfiles$dlprefiles"; then
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
 	$echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
       fi
 
@@ -1461,7 +1527,7 @@ compiler."
 	$echo "$modename: warning: \`-release' is ignored for archives" 1>&2
       fi
 
-      if test -n "$export_symbols"; then
+      if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
 	$echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2
       fi
 
@@ -1500,11 +1566,6 @@ compiler."
 	output_objdir="$output_objdir/$objdir"
       fi
 
-      # All the library-specific variables (install_libdir is set above).
-      library_names=
-      old_library=
-      dlname=
-
       if test -n "$objs"; then
 	$echo "$modename: cannot build libtool library \`$output' from non-libtool objects:$objs" 2>&1
 	exit 1
@@ -1516,7 +1577,7 @@ compiler."
 	 exit 1
       fi
 
-      if test -n "$dlfiles$dlprefiles"; then
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
 	$echo "$modename: warning: \`-dlopen' is ignored for libtool libraries" 1>&2
       fi
 
@@ -1699,7 +1760,7 @@ compiler."
 
 	dependency_libs="$deplibs"
 	case "$host" in
-	*-*-cygwin* | *-*-mingw* | *-*-os2*)
+	*-*-cygwin* | *-*-mingw* | *-*-os2* | *-*-beos*)
 	  # these systems don't actually have a c library (as such)!
 	  ;;
 	*)
@@ -1747,12 +1808,13 @@ compiler."
 	droppeddeps=no
 	case "$deplibs_check_method" in
 	pass_all)
+	  # Don't check for shared/static.  Everything works.
+	  # This might be a little naive.  We might want to check
+	  # whether the library exists or not.  But this is on
+	  # osf3 & osf4 and I'm not really sure... Just
+	  # implementing what was already the behaviour.
 	  newdeplibs=$deplibs
-		    ;; # Don't check for shared/static.  Everything works.
-		       # This might be a little naive.  We might want to check
-		       # whether the library exists or not.  But this is on
-		       # osf3 & osf4 and I'm not really sure... Just
-		       # implementing what was already the behaviour.
+	  ;;
 	test_compile)
 	  # This code stresses the "libraries are programs" paradigm to its
 	  # limits. Maybe even breaks it.  We compile a program, linking it
@@ -1800,20 +1862,20 @@ EOF
 		# Did it work?
 		if test $? -eq 0 ; then
 		  ldd_output=`ldd conftest`
-		    libname=`eval \\$echo \"$libname_spec\"`
-		    deplib_matches=`eval \\$echo \"$library_names_spec\"`
-		    set dummy $deplib_matches
-		    deplib_match=$2
-		    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
-		      newdeplibs="$newdeplibs $i"
-		    else
-		      droppeddeps=yes
-		      echo
-		      echo "*** Warning: This library needs some functionality provided by $i."
-		      echo "*** I have the capability to make that library automatically link in when"
-		      echo "*** you link to this library.  But I can only do this if you have a"
-		      echo "*** shared version of the library, which you do not appear to have."
-		    fi
+		  libname=`eval \\$echo \"$libname_spec\"`
+		  deplib_matches=`eval \\$echo \"$library_names_spec\"`
+		  set dummy $deplib_matches
+		  deplib_match=$2
+		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+		    newdeplibs="$newdeplibs $i"
+		  else
+		    droppeddeps=yes
+		    echo
+		    echo "*** Warning: This library needs some functionality provided by $i."
+		    echo "*** I have the capability to make that library automatically link in when"
+		    echo "*** you link to this library.  But I can only do this if you have a"
+		    echo "*** shared version of the library, which you do not appear to have."
+		  fi
 		else
 		  droppeddeps=yes
 		  echo
@@ -1827,7 +1889,6 @@ EOF
 	      fi
 	    done
 	  fi
-	  deplibs=$newdeplibs
 	  ;;
 	file_magic*)
 	  set dummy $deplibs_check_method
@@ -1854,11 +1915,11 @@ EOF
 		      while test -h "$potlib" 2>/dev/null; do
 			potliblink=`ls -ld $potlib | sed 's/.* -> //'`
 			case "$potliblink" in
-			/*) potlib="$potliblink";;
+			[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
 			*) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
 			esac
 		      done
-		      if eval $file_magic_cmd \"\$potlib\" \
+		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
 			 | sed 10q \
 			 | egrep "$file_magic_regex" > /dev/null; then
 			newdeplibs="$newdeplibs $a_deplib"
@@ -1881,7 +1942,8 @@ EOF
 	    fi
 	  done # Gone through all deplibs.
 	  ;;
-	none | unknown | *) newdeplibs=""
+	none | unknown | *)
+	  newdeplibs=""
 	  if $echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
 	       -e 's/ -[LR][^ ]*//g' -e 's/[ 	]//g' |
 	     grep . >/dev/null; then
@@ -1923,21 +1985,23 @@ EOF
 	    else
 	      build_libtool_libs=no
 	    fi
-	    dlname=
-	    library_names=
 	  else
 	    echo "*** The inter-library dependencies that have been dropped here will be"
 	    echo "*** automatically added whenever a program is linked with this library"
 	    echo "*** or is declared to -dlopen it."
 	  fi
 	fi
+	# Done checking deplibs!
+	deplibs=$newdeplibs
       fi
 
-      # test again, we may have decided not to build it any more
+      # All the library-specific variables (install_libdir is set above).
+      library_names=
+      old_library=
+      dlname=
+      
+      # Test again, we may have decided not to build it any more
       if test "$build_libtool_libs" = yes; then
-	deplibs=$newdeplibs
-	# Done checking deplibs!
- 
 	# Get the real and link names of the library.
 	eval library_names=\"$library_names_spec\"
 	set dummy $library_names
@@ -1960,7 +2024,10 @@ EOF
 	# (e.g. aix) incase we are running --disable-static
 	for obj in $libobjs; do
 	  oldobj=`$echo "X$obj" | $Xsed -e "$lo2o"`
-	  test -f $oldobj || ${LN_S} $obj $oldobj
+	  if test ! -f $oldobj; then
+	    $show "${LN_S} $obj $oldobj"
+	    $run ${LN_S} $obj $oldobj || exit $?
+	  fi
 	done
 
 	# Use standard objects if they are pic
@@ -1971,11 +2038,25 @@ EOF
 	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
 	  fi
 	else
+	  gentop="$output_objdir/${outputname}x"
+	  $show "${rm}r $gentop"
+	  $run ${rm}r "$gentop"
+	  $show "mkdir $gentop"
+	  $run mkdir "$gentop"
+	  status=$?
+	  if test $status -ne 0 && test ! -d "$gentop"; then
+	    exit $status
+	  fi
+	  generated="$generated $gentop"
+	  
 	  for xlib in $convenience; do
 	    # Extract the objects.
-	    xdir="$xlib"x
-	    generated="$generated $xdir"
+	    case "$xlib" in
+	    [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
+	    *) xabs=`pwd`"/$xlib" ;;
+	    esac
 	    xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
+	    xdir="$gentop/$xlib"
 
 	    $show "${rm}r $xdir"
 	    $run ${rm}r "$xdir"
@@ -1985,8 +2066,8 @@ EOF
 	    if test $status -ne 0 && test ! -d "$xdir"; then
 	      exit $status
 	    fi
-	    $show "(cd $xdir && $AR x ../$xlib)"
-	    $run eval "(cd \$xdir && $AR x ../\$xlib)" || exit $?
+	    $show "(cd $xdir && $AR x $xabs)"
+	    $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
 
 	    libobjs="$libobjs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP`
 	  done
@@ -1994,7 +2075,6 @@ EOF
 
 	if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
 	  eval flag=\"$thread_safe_flag_spec\"
-
 	  linkopts="$linkopts $flag"
 	fi
 
@@ -2002,7 +2082,7 @@ EOF
 	if test -z "$export_symbols"; then
 	  if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
 	    $show "generating symbol list for \`$libname.la'"
-	    export_symbols="$objdir/$libname.exp"
+	    export_symbols="$output_objdir/$libname.exp"
 	    $run $rm $export_symbols
 	    eval cmds=\"$export_symbols_cmds\"
 	    IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
@@ -2065,7 +2145,7 @@ EOF
 	$echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2
       fi
 
-      if test -n "$dlfiles$dlprefiles"; then
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
 	$echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2
       fi
 
@@ -2167,11 +2247,6 @@ EOF
 	fi 
       fi
     
-      if test "$dlself" = yes && test "$export_dynamic" = no; then
-	$echo "$modename: error: \`-dlopen self' requires \`-export-dynamic'" 1>&2
-	exit 1
-      fi
-
       if test -n "$rpath$xrpath"; then
 	# If the user specified any rpath flags, then add them.
 	for libdir in $rpath $xrpath; do
@@ -2207,7 +2282,6 @@ EOF
 	    fi
 	  else
 	    eval flag=\"$hardcode_libdir_flag_spec\"
-
 	    rpath="$rpath $flag"
 	  fi
 	elif test -n "$runpath_var"; then
@@ -2244,7 +2318,6 @@ EOF
 	    fi
 	  else
 	    eval flag=\"$hardcode_libdir_flag_spec\"
-
 	    rpath="$rpath $flag"
 	  fi
 	elif test -n "$runpath_var"; then
@@ -2269,6 +2342,16 @@ EOF
 	output_objdir="$output_objdir/$objdir"
       fi
 
+      # Create the binary in the object directory, then wrap it.
+      if test ! -d $output_objdir; then
+	$show "$mkdir $output_objdir"
+	$run $mkdir $output_objdir
+	status=$?
+	if test $status -ne 0 && test ! -d $output_objdir; then
+	  exit $status
+	fi
+      fi
+
       if test -n "$libobjs" && test "$build_old_libs" = yes; then
 	# Transform all the library objects into standard objects.
 	compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
@@ -2289,24 +2372,15 @@ EOF
 	"") ;;
 	*.c)
 	  # Discover the nlist of each of the dlfiles.
-	  nlist="$objdir/${output}.nm"
+	  nlist="$output_objdir/${outputname}.nm"
 
-	  if test -d $objdir; then
-	    $show "$rm $nlist ${nlist}S ${nlist}T"
-	    $run $rm "$nlist" "${nlist}S" "${nlist}T"
-	  else
-	    $show "$mkdir $objdir"
-	    $run $mkdir $objdir
-	    status=$?
-	    if test $status -ne 0 && test ! -d $objdir; then
-	      exit $status
-	    fi
-	  fi
+	  $show "$rm $nlist ${nlist}S ${nlist}T"
+	  $run $rm "$nlist" "${nlist}S" "${nlist}T"
 
 	  # Parse the name list into a source file.
-	  $show "creating $objdir/$dlsyms"
+	  $show "creating $output_objdir/$dlsyms"
 
-	  $echo > "$objdir/$dlsyms" "\
+	  test -z "$run" && $echo > "$output_objdir/$dlsyms" "\
 /* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */
 /* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */
 
@@ -2323,7 +2397,7 @@ extern \"C\" {
 	  if test "$dlself" = yes; then
 	    $show "generating symbol list for \`$output'"
 
-	    echo ': @PROGRAM@ ' > "$nlist"
+	    test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist"
 
 	    # Add our own program objects to the symbol list.
 	    progfiles=`$echo "X$objs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
@@ -2344,13 +2418,12 @@ extern \"C\" {
 
 	    # Prepare the list of exported symbols
 	    if test -z "$export_symbols"; then
-	      export_symbols="$objdir/$output.exp"
+	      export_symbols="$output_objdir/$output.exp"
 	      $run $rm $export_symbols
 	      $run eval "sed -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
 	    else
-	      $run $rm $export_symbols
-	      $run eval "sed -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$objdir/$output.exp"'
-	      $run eval 'grep -f "$objdir/$output.exp" < "$nlist" > "$nlist"T'
+	      $run eval "sed -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"'
+	      $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T'
 	      $run eval 'mv "$nlist"T "$nlist"'
 	    fi
 	  fi
@@ -2426,7 +2499,7 @@ static const void *lt_preloaded_setup() {
 	  fi
 
 	  pic_flag_for_symtable=
-          case "$host" in
+	  case "$host" in
 	  # compiling the symbol table file with pic_flag works around
 	  # a FreeBSD bug that causes programs to crash when -lm is
 	  # linked before any other PIC object.  But we must not use
@@ -2440,12 +2513,16 @@ static const void *lt_preloaded_setup() {
 	  esac
 
 	  # Now compile the dynamic symbol file.
-	  $show "(cd $objdir && $C_compiler -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
-	  $run eval '(cd $objdir && $C_compiler -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
+	  $show "(cd $output_objdir && $C_compiler -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
+	  $run eval '(cd $output_objdir && $C_compiler -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
+
+	  # Clean up the generated files.
+	  $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
+	  $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
 
 	  # Transform the symbol file into the correct name.
-	  compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$objdir/${output}S.${objext}%"`
-	  finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$objdir/${output}S.${objext}%"`
+	  compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+	  finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
 	  ;;
 	*)
 	  $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
@@ -2470,7 +2547,15 @@ static const void *lt_preloaded_setup() {
 	# We have no uninstalled library dependencies, so finalize right now.
 	$show "$link_command"
 	$run eval "$link_command"
-	exit $?
+	status=$?
+	
+	# Delete the generated files.
+	if test -n "$dlsyms"; then
+	  $show "$rm $output_objdir/${outputname}S.${objext}"
+	  $run $rm "$output_objdir/${outputname}S.${objext}"
+	fi
+
+	exit $status
       fi
 
       if test -n "$shlibpath_var"; then
@@ -2478,7 +2563,7 @@ static const void *lt_preloaded_setup() {
 	rpath=
 	for dir in $temp_rpath; do
 	  case "$dir" in
-	  /* | [A-Za-z]:[/\\]*)
+	  [\\/]* | [A-Za-z]:[\\/]*)
 	    # Absolute path.
 	    rpath="$rpath$dir:"
 	    ;;
@@ -2524,7 +2609,6 @@ static const void *lt_preloaded_setup() {
 	link_command="$compile_var$compile_command$compile_rpath"
 	relink_command="$finalize_var$finalize_command$finalize_rpath"
 	
-	# AGH! Flame the AIX and HP-UX people for me, will ya?
 	$echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2
 	$echo "$modename: \`$output' will be relinked during installation" 1>&2
       else
@@ -2545,17 +2629,7 @@ static const void *lt_preloaded_setup() {
       # Replace the output file specification.
       link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
       
-      # Create the binary in the object directory, then wrap it.
-      if test ! -d $output_objdir; then
-	$show "$mkdir $output_objdir"
-	$run $mkdir $output_objdir
-	status=$?
-	if test $status -ne 0 && test ! -d $objdir; then
-	  exit $status
-	fi
-      fi
-
-      # Delete the old output file.
+      # Delete the old output files.
       $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname
 
       $show "$link_command"
@@ -2572,7 +2646,7 @@ static const void *lt_preloaded_setup() {
       # Quote $echo for shipping.
       if test "X$echo" = "X$SHELL $0 --fallback-echo"; then
 	case "$0" in
-	/* | [A-Za-z]:[/\\]*) qecho="$SHELL $0 --fallback-echo";;
+	[\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";;
 	*) qecho="$SHELL `pwd`/$0 --fallback-echo";;
 	esac
 	qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
@@ -2649,7 +2723,7 @@ else
     # If there was a directory component, then change thisdir.
     if test \"x\$destdir\" != \"x\$file\"; then
       case \"\$destdir\" in
-      /* | [A-Za-z]:[/\\]*) thisdir=\"\$destdir\" ;;
+      [\\/]* | [A-Za-z]:[\\/]*) thisdir=\"\$destdir\" ;;
       *) thisdir=\"\$thisdir/\$destdir\" ;;
       esac
     fi
@@ -2787,31 +2861,58 @@ fi\
 	addlibs="$old_convenience"
       fi
 
-      # Add in members from convenience archives.
-      for xlib in $addlibs; do
-	# Extract the objects.
-	xdir="$xlib"x
-	generated="$generated $xdir"
-	xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
-
-	$show "${rm}r $xdir"
-	$run ${rm}r "$xdir"
-	$show "mkdir $xdir"
-	$run mkdir "$xdir"
+      if test -n "$addlibs"; then
+	gentop="$output_objdir/${outputname}x"
+	$show "${rm}r $gentop"
+	$run ${rm}r "$gentop"
+	$show "mkdir $gentop"
+	$run mkdir "$gentop"
 	status=$?
-	if test $status -ne 0 && test ! -d "$xdir"; then
+	if test $status -ne 0 && test ! -d "$gentop"; then
 	  exit $status
 	fi
-	$show "(cd $xdir && $AR x ../$xlib)"
-	$run eval "(cd \$xdir && $AR x ../\$xlib)" || exit $?
+	generated="$generated $gentop"
+	  
+	# Add in members from convenience archives.
+	for xlib in $addlibs; do
+	  # Extract the objects.
+	  case "$xlib" in
+	  [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
+	  *) xabs=`pwd`"/$xlib" ;;
+	  esac
+	  xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
+	  xdir="$gentop/$xlib"
 
-	oldobjs="$oldobjs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP`
-      done
+	  $show "${rm}r $xdir"
+	  $run ${rm}r "$xdir"
+	  $show "mkdir $xdir"
+	  $run mkdir "$xdir"
+	  status=$?
+	  if test $status -ne 0 && test ! -d "$xdir"; then
+	    exit $status
+	  fi
+	  $show "(cd $xdir && $AR x $xabs)"
+	  $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
+
+	  oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP`
+	done
+      fi
 
       # Do each command in the archive commands.
       if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
 	eval cmds=\"$old_archive_from_new_cmds\"
       else
+	# Ensure that we have .o objects in place incase we decided
+	# not to build a shared library, and have fallen back to building
+	# static libs even though --disable-static was passed!
+	for oldobj in $oldobjs; do
+	  if test ! -f $oldobj; then
+	    obj=`$echo "X$oldobj" | $Xsed -e "$o2lo"`
+	    $show "${LN_S} $obj $oldobj"
+	    $run ${LN_S} $obj $oldobj || exit $?
+	  fi
+	done
+
 	eval cmds=\"$old_archive_cmds\"
       fi
       IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
@@ -2845,9 +2946,20 @@ fi\
 
       # Only create the output if not a dry run.
       if test -z "$run"; then
-	$echo > $output "\
-# $output - a libtool library file
+	for installed in no yes; do
+	  if test "$installed" = yes; then
+	    if test -z "$install_libdir"; then
+	      break
+	    fi
+	    output="$output_objdir/$outputname"i
+	  fi
+	  $rm $output
+	  $echo > $output "\
+# $outputname - a libtool library file
 # Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
 
 # The name that we can dlopen(3).
 dlname='$dlname'
@@ -2867,15 +2979,12 @@ age=$age
 revision=$revision
 
 # Is this an already installed library?
-installed=no
+installed=$installed
 
 # Directory that this library needs to be installed in:
 libdir='$install_libdir'\
 "
-
-	$rm "$output_objdir/$outputname"i
-	sed 's/^installed=no$/installed=yes/' \
-	  < "$output" > "$output_objdir/$outputname"i || exit 1
+	done
       fi
 
       # Do a symbolic link so that the libtool archive can be found in
@@ -3012,7 +3121,7 @@ libdir='$install_libdir'\
       fi
     fi
     case "$destdir" in
-    /* | [A-Za-z]:[/\\]*) ;;
+    [\\/]* | [A-Za-z]:[\\/]*) ;;
     *)
       for file in $files; do
 	case "$file" in
@@ -3123,12 +3232,6 @@ libdir='$install_libdir'\
 	# Install the pseudo-library for information purposes.
 	name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
 	instname="$dir/$name"i
-	if test ! -f "$instname"; then
-	  # Just in case it was removed...
-	  $show "Creating $instname"
-	  $rm "$instname"
-	  sed 's/^installed=no$/installed=yes/' "$file" > "$instname"
-	fi
 	$show "$install_prog $instname $destdir/$name"
 	$run eval "$install_prog $instname $destdir/$name" || exit $?
 
@@ -3226,21 +3329,29 @@ libdir='$install_libdir'\
 
 	  outputname=
 	  if test "$fast_install" = no && test -n "$relink_command"; then
-	    if test "$finalize" = yes; then
-	      outputname="/tmp/$$-$file"
+	    if test "$finalize" = yes && test -z "$run"; then
+	      tmpdir="/tmp"
+	      test -n "$TMPDIR" && tmpdir="$TMPDIR"
+	      tmpdir="$tmpdir/libtool-$$"
+	      if $mkdir -p "$tmpdir" && chmod 700 "$tmpdir"; then :
+	      else
+		$echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2
+		continue
+	      fi
+	      outputname="$tmpdir/$file"
 	      # Replace the output file specification.
 	      relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
 
-	      $echo "$modename: warning: relinking \`$file' on behalf of your buggy system linker" 1>&2
 	      $show "$relink_command"
 	      if $run eval "$relink_command"; then :
 	      else
 		$echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
+		${rm}r "$tmpdir"
 		continue
 	      fi
 	      file="$outputname"
 	    else
-	      $echo "$modename: warning: cannot relink \`$file' on behalf of your buggy system linker" 1>&2
+	      $echo "$modename: warning: cannot relink \`$file'" 1>&2
 	    fi
 	  else
 	    # Install the binary that we compiled earlier.
@@ -3250,7 +3361,7 @@ libdir='$install_libdir'\
 
 	$show "$install_prog$stripme $file $destfile"
 	$run eval "$install_prog\$stripme \$file \$destfile" || exit $?
-	test -n "$outputname" && $rm $outputname
+	test -n "$outputname" && ${rm}r "$tmpdir"
 	;;
       esac
     done
@@ -3718,6 +3829,8 @@ The following components of LINK-COMMAND are treated specially:
   -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
   -export-symbols SYMFILE
 		    try to export only the symbols listed in SYMFILE
+  -export-symbols-regex REGEX
+		    try to export only the symbols matching REGEX
   -LLIBDIR          search LIBDIR for required installed libraries
   -lNAME            OUTPUT-FILE requires the installed library libNAME
   -module           build a library that can dlopened