Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 184 insertions, 0 deletions

diff --git a/Documentation/input/amijoy.txt b/Documentation/input/amijoy.txt
new file mode 100644
index 000000000000..3b8b2d43a68e
--- /dev/null
+++ b/Documentation/input/amijoy.txt
@@ -0,0 +1,184 @@
+Amiga 4-joystick parport extension
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Parallel port pins:
+
+ (2) - Up1	 (6) - Up2
+ (3) - Down1	 (7) - Down2
+ (4) - Left1	 (8) - Left2
+ (5) - Right1	 (9) - Right2
+(13) - Fire1	(11) - Fire2
+(18) - Gnd1	(18) - Gnd2
+
+Amiga digital joystick pinout
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+(1) - Up
+(2) - Down
+(3) - Left
+(4) - Right
+(5) - n/c
+(6) - Fire button
+(7) - +5V (50mA)
+(8) - Gnd
+(9) - Thumb button
+
+Amiga mouse pinout
+~~~~~~~~~~~~~~~~~~
+(1) - V-pulse
+(2) - H-pulse
+(3) - VQ-pulse
+(4) - HQ-pulse
+(5) - Middle button
+(6) - Left button
+(7) - +5V (50mA)
+(8) - Gnd
+(9) - Right button
+
+Amiga analog joystick pinout
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+(1) - Top button
+(2) - Top2 button
+(3) - Trigger button
+(4) - Thumb button
+(5) - Analog X
+(6) - n/c
+(7) - +5V (50mA)
+(8) - Gnd
+(9) - Analog Y
+
+Amiga lightpen pinout
+~~~~~~~~~~~~~~~~~~~~~
+(1) - n/c
+(2) - n/c
+(3) - n/c
+(4) - n/c
+(5) - Touch button
+(6) - /Beamtrigger
+(7) - +5V (50mA)
+(8) - Gnd
+(9) - Stylus button
+
+-------------------------------------------------------------------------------
+
+NAME     rev ADDR type chip   Description
+JOY0DAT      00A   R   Denise Joystick-mouse 0 data (left vert, horiz)
+JOY1DAT      00C   R   Denise Joystick-mouse 1 data (right vert,horiz)
+
+        These addresses each read a 16 bit register. These in turn
+        are loaded from the MDAT serial stream and are clocked in on
+        the rising edge of SCLK. MLD output is used to parallel load
+        the external parallel-to-serial converter.This in turn is
+        loaded with the 4 quadrature inputs from each of two game
+        controller ports (8 total) plus 8 miscellaneous control bits
+        which are new for LISA and can be read in upper 8 bits of
+        LISAID.
+        Register bits are as follows:
+        Mouse counter usage (pins  1,3 =Yclock, pins 2,4 =Xclock)
+
+    BIT#  15  14  13  12  11  10  09  08     07  06  05  04  03  02  01  00
+JOY0DAT   Y7  Y6  Y5  Y4  Y3  Y2  Y1  Y0     X7  X6  X5  X4  X3  X2  X1  X0
+JOY1DAT   Y7  Y6  Y5  Y4  Y3  Y2  Y1  Y0     X7  X6  X5  X4  X3  X2  X1  X0
+
+        0=LEFT CONTROLLER PAIR, 1=RIGHT CONTROLLER PAIR.
+        (4 counters total).The bit usage for both left and right
+        addresses is shown below. Each 6 bit counter (Y7-Y2,X7-X2) is
+        clocked by 2 of the signals input from the mouse serial
+        stream. Starting with first bit recived:
+
+         +-------------------+-----------------------------------------+
+         | Serial | Bit Name | Description                             |
+         +--------+----------+-----------------------------------------+
+         |   0    | M0H      | JOY0DAT Horizontal Clock                |
+         |   1    | M0HQ     | JOY0DAT Horizontal Clock (quadrature)   |
+         |   2    | M0V      | JOY0DAT Vertical Clock                  |
+         |   3    | M0VQ     | JOY0DAT Vertical Clock  (quadrature)    |
+         |   4    | M1V      | JOY1DAT Horizontall Clock               |
+         |   5    | M1VQ     | JOY1DAT Horizontall Clock (quadrature)  |
+         |   6    | M1V      | JOY1DAT Vertical Clock                  |
+         |   7    | M1VQ     | JOY1DAT Vertical Clock (quadrature)     |
+         +--------+----------+-----------------------------------------+
+
+         Bits 1 and 0 of each counter (Y1-Y0,X1-X0) may be
+         read to determine the state of the related input signal pair.
+         This allows these pins to double as joystick switch inputs.
+         Joystick switch closures can be deciphered as follows:
+
+         +------------+------+---------------------------------+
+         | Directions | Pin# | Counter bits                    |
+         +------------+------+---------------------------------+
+         | Forward    |  1   | Y1 xor Y0 (BIT#09 xor BIT#08)   |
+         | Left       |  3   | Y1                              |
+         | Back       |  2   | X1 xor X0 (BIT#01 xor BIT#00)   |
+         | Right      |  4   | X1                              |
+         +------------+------+---------------------------------+
+
+-------------------------------------------------------------------------------
+
+NAME      rev ADDR type chip    Description
+JOYTEST       036   W   Denise  Write to all 4  joystick-mouse counters at once.
+
+                  Mouse counter write test data:
+     BIT#  15  14  13  12  11  10  09  08     07  06  05  04  03  02  01  00
+  JOYxDAT  Y7  Y6  Y5  Y4  Y3  Y2  xx  xx     X7  X6  X5  X4  X3  X2  xx  xx
+  JOYxDAT  Y7  Y6  Y5  Y4  Y3  Y2  xx  xx     X7  X6  X5  X4  X3  X2  xx  xx
+
+-------------------------------------------------------------------------------
+
+NAME    rev ADDR type chip   Description
+POT0DAT  h  012   R   Paula  Pot counter data left pair (vert, horiz)
+POT1DAT  h  014   R   Paula  Pot counter data right pair (vert,horiz)
+
+        These addresses each read a pair of 8 bit pot counters.
+        (4 counters total). The bit assignment for both
+        addresses is shown below. The counters are stopped by signals
+        from 2 controller connectors (left-right) with 2 pins each.
+
+  BIT#  15  14  13  12  11  10  09  08     07  06  05  04  03  02  01  00
+ RIGHT  Y7  Y6  Y5  Y4  Y3  Y2  Y1  Y0     X7  X6  X5  X4  X3  X2  X1  X0
+  LEFT  Y7  Y6  Y5  Y4  Y3  Y2  Y1  Y0     X7  X6  X5  X4  X3  X2  X1  X0
+
+         +--------------------------+-------+
+         | CONNECTORS               | PAULA |
+         +-------+------+-----+-----+-------+
+         | Loc.  | Dir. | Sym | pin | pin   |
+         +-------+------+-----+-----+-------+
+         | RIGHT | Y    | RX  | 9   | 33    |
+         | RIGHT | X    | RX  | 5   | 32    |
+         | LEFT  | Y    | LY  | 9   | 36    |
+         | LEFT  | X    | LX  | 5   | 35    |
+         +-------+------+-----+-----+-------+
+
+         With normal (NTSC or PAL) horiz. line rate, the pots will
+         give a full scale (FF) reading with about 500kohms in one
+         frame time. With proportionally faster horiz line times,
+         the counters will count proportionally faster.
+         This should be noted when doing variable beam displays.
+
+-------------------------------------------------------------------------------
+
+NAME   rev ADDR type chip   Description
+POTGO      034   W   Paula  Pot port (4 bit) bi-direction and data, and pot counter start.
+
+-------------------------------------------------------------------------------
+
+NAME   rev ADDR type chip   Description
+POTINP     016   R   Paula  Pot pin data read
+
+        This register controls a 4 bit bi-direction I/O port
+        that shares the same 4 pins as the 4 pot counters above.
+
+         +-------+----------+---------------------------------------------+
+         | BIT#  | FUNCTION | DESCRIPTION                                 |
+         +-------+----------+---------------------------------------------+
+         | 15    | OUTRY    | Output enable for Paula pin 33              |
+         | 14    | DATRY    | I/O data Paula pin 33                       |
+         | 13    | OUTRX    | Output enable for Paula pin 32              |
+         | 12    | DATRX    | I/O data Paula pin 32                       |
+         | 11    | OUTLY    | Out put enable for Paula pin 36             |
+         | 10    | DATLY    | I/O data Paula pin 36                       |
+         | 09    | OUTLX    | Output enable for Paula pin 35              |
+         | 08    | DATLX    | I/O data  Paula pin 35                      |
+         | 07-01 |   X      | Not used                                    |
+         | 00    | START    | Start pots (dump capacitors,start counters) |
+         +-------+----------+---------------------------------------------+
+
+-------------------------------------------------------------------------------