Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 193 insertions, 0 deletions

diff --git a/include/asm-cris/arch-v10/io.h b/include/asm-cris/arch-v10/io.h
new file mode 100644
index 000000000000..0bc38a0313c1
--- /dev/null
+++ b/include/asm-cris/arch-v10/io.h
@@ -0,0 +1,193 @@
+#ifndef _ASM_ARCH_CRIS_IO_H
+#define _ASM_ARCH_CRIS_IO_H
+
+#include <asm/arch/svinto.h>
+#include <linux/config.h>
+
+/* Etrax shadow registers - which live in arch/cris/kernel/shadows.c */
+
+extern unsigned long port_g_data_shadow;
+extern unsigned char port_pa_dir_shadow;
+extern unsigned char port_pa_data_shadow;
+extern unsigned char port_pb_i2c_shadow;
+extern unsigned char port_pb_config_shadow;
+extern unsigned char port_pb_dir_shadow;
+extern unsigned char port_pb_data_shadow;
+extern unsigned long r_timer_ctrl_shadow;
+
+extern unsigned long port_cse1_shadow;
+extern unsigned long port_csp0_shadow;
+extern unsigned long port_csp4_shadow;
+
+extern volatile unsigned long *port_cse1_addr;
+extern volatile unsigned long *port_csp0_addr;
+extern volatile unsigned long *port_csp4_addr;
+
+/* macro for setting regs through a shadow - 
+ * r = register name (like R_PORT_PA_DATA)
+ * s = shadow name (like port_pa_data_shadow)
+ * b = bit number
+ * v = value (0 or 1)
+ */
+
+#define REG_SHADOW_SET(r,s,b,v) *r = s = (s & ~(1 << (b))) | ((v) << (b))
+
+/* The LED's on various Etrax-based products are set differently. */
+
+#if defined(CONFIG_ETRAX_NO_LEDS) || defined(CONFIG_SVINTO_SIM)
+#undef CONFIG_ETRAX_PA_LEDS
+#undef CONFIG_ETRAX_PB_LEDS
+#undef CONFIG_ETRAX_CSP0_LEDS
+#define LED_NETWORK_SET_G(x)
+#define LED_NETWORK_SET_R(x)
+#define LED_ACTIVE_SET_G(x)
+#define LED_ACTIVE_SET_R(x)
+#define LED_DISK_WRITE(x)
+#define LED_DISK_READ(x)
+#endif
+
+#if !defined(CONFIG_ETRAX_CSP0_LEDS)
+#define LED_BIT_SET(x)
+#define LED_BIT_CLR(x)
+#endif
+
+#define LED_OFF    0x00
+#define LED_GREEN  0x01
+#define LED_RED    0x02
+#define LED_ORANGE (LED_GREEN | LED_RED)
+
+#if CONFIG_ETRAX_LED1G == CONFIG_ETRAX_LED1R 
+#define LED_NETWORK_SET(x)                          \
+	do {                                        \
+		LED_NETWORK_SET_G((x) & LED_GREEN); \
+	} while (0)
+#else
+#define LED_NETWORK_SET(x)                          \
+	do {                                        \
+		LED_NETWORK_SET_G((x) & LED_GREEN); \
+		LED_NETWORK_SET_R((x) & LED_RED);   \
+	} while (0)
+#endif
+#if CONFIG_ETRAX_LED2G == CONFIG_ETRAX_LED2R 
+#define LED_ACTIVE_SET(x)                           \
+	do {                                        \
+		LED_ACTIVE_SET_G((x) & LED_GREEN);  \
+	} while (0)
+#else
+#define LED_ACTIVE_SET(x)                           \
+	do {                                        \
+		LED_ACTIVE_SET_G((x) & LED_GREEN);  \
+		LED_ACTIVE_SET_R((x) & LED_RED);    \
+	} while (0)
+#endif
+
+#ifdef CONFIG_ETRAX_PA_LEDS
+#define LED_NETWORK_SET_G(x) \
+         REG_SHADOW_SET(R_PORT_PA_DATA, port_pa_data_shadow, CONFIG_ETRAX_LED1G, !(x))
+#define LED_NETWORK_SET_R(x) \
+         REG_SHADOW_SET(R_PORT_PA_DATA, port_pa_data_shadow, CONFIG_ETRAX_LED1R, !(x))
+#define LED_ACTIVE_SET_G(x) \
+         REG_SHADOW_SET(R_PORT_PA_DATA, port_pa_data_shadow, CONFIG_ETRAX_LED2G, !(x))
+#define LED_ACTIVE_SET_R(x) \
+         REG_SHADOW_SET(R_PORT_PA_DATA, port_pa_data_shadow, CONFIG_ETRAX_LED2R, !(x))
+#define LED_DISK_WRITE(x) \
+         do{\
+                REG_SHADOW_SET(R_PORT_PA_DATA, port_pa_data_shadow, CONFIG_ETRAX_LED3G, !(x));\
+                REG_SHADOW_SET(R_PORT_PA_DATA, port_pa_data_shadow, CONFIG_ETRAX_LED3R, !(x));\
+        }while(0)
+#define LED_DISK_READ(x) \
+         REG_SHADOW_SET(R_PORT_PA_DATA, port_pa_data_shadow, CONFIG_ETRAX_LED3G, !(x)) 
+#endif
+
+#ifdef CONFIG_ETRAX_PB_LEDS
+#define LED_NETWORK_SET_G(x) \
+         REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, CONFIG_ETRAX_LED1G, !(x))
+#define LED_NETWORK_SET_R(x) \
+         REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, CONFIG_ETRAX_LED1R, !(x))
+#define LED_ACTIVE_SET_G(x) \
+         REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, CONFIG_ETRAX_LED2G, !(x))
+#define LED_ACTIVE_SET_R(x) \
+         REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, CONFIG_ETRAX_LED2R, !(x))
+#define LED_DISK_WRITE(x) \
+        do{\
+                REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, CONFIG_ETRAX_LED3G, !(x));\
+                REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, CONFIG_ETRAX_LED3R, !(x));\
+        }while(0)
+#define LED_DISK_READ(x) \
+         REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, CONFIG_ETRAX_LED3G, !(x))     
+#endif
+
+#ifdef CONFIG_ETRAX_CSP0_LEDS
+#define CONFIGURABLE_LEDS\
+        ((1 << CONFIG_ETRAX_LED1G ) | (1 << CONFIG_ETRAX_LED1R ) |\
+         (1 << CONFIG_ETRAX_LED2G ) | (1 << CONFIG_ETRAX_LED2R ) |\
+         (1 << CONFIG_ETRAX_LED3G ) | (1 << CONFIG_ETRAX_LED3R ) |\
+         (1 << CONFIG_ETRAX_LED4G ) | (1 << CONFIG_ETRAX_LED4R ) |\
+         (1 << CONFIG_ETRAX_LED5G ) | (1 << CONFIG_ETRAX_LED5R ) |\
+         (1 << CONFIG_ETRAX_LED6G ) | (1 << CONFIG_ETRAX_LED6R ) |\
+         (1 << CONFIG_ETRAX_LED7G ) | (1 << CONFIG_ETRAX_LED7R ) |\
+         (1 << CONFIG_ETRAX_LED8Y ) | (1 << CONFIG_ETRAX_LED9Y ) |\
+         (1 << CONFIG_ETRAX_LED10Y ) |(1 << CONFIG_ETRAX_LED11Y )|\
+         (1 << CONFIG_ETRAX_LED12R ))
+
+#define LED_NETWORK_SET_G(x) \
+         REG_SHADOW_SET(port_csp0_addr, port_csp0_shadow, CONFIG_ETRAX_LED1G, !(x))
+#define LED_NETWORK_SET_R(x) \
+         REG_SHADOW_SET(port_csp0_addr, port_csp0_shadow, CONFIG_ETRAX_LED1R, !(x))
+#define LED_ACTIVE_SET_G(x) \
+         REG_SHADOW_SET(port_csp0_addr, port_csp0_shadow, CONFIG_ETRAX_LED2G, !(x))
+#define LED_ACTIVE_SET_R(x) \
+         REG_SHADOW_SET(port_csp0_addr, port_csp0_shadow, CONFIG_ETRAX_LED2R, !(x))
+#define LED_DISK_WRITE(x) \
+        do{\
+                REG_SHADOW_SET(port_csp0_addr, port_csp0_shadow, CONFIG_ETRAX_LED3G, !(x));\
+                REG_SHADOW_SET(port_csp0_addr, port_csp0_shadow, CONFIG_ETRAX_LED3R, !(x));\
+        }while(0)
+#define LED_DISK_READ(x) \
+         REG_SHADOW_SET(port_csp0_addr, port_csp0_shadow, CONFIG_ETRAX_LED3G, !(x))
+#define LED_BIT_SET(x)\
+        do{\
+                if((( 1 << x) & CONFIGURABLE_LEDS)  != 0)\
+                       REG_SHADOW_SET(port_csp0_addr, port_csp0_shadow, x, 1);\
+        }while(0)
+#define LED_BIT_CLR(x)\
+        do{\
+                if((( 1 << x) & CONFIGURABLE_LEDS)  != 0)\
+                       REG_SHADOW_SET(port_csp0_addr, port_csp0_shadow, x, 0);\
+        }while(0)
+#endif
+
+#
+#ifdef CONFIG_ETRAX_SOFT_SHUTDOWN
+#define SOFT_SHUTDOWN() \
+          REG_SHADOW_SET(port_csp0_addr, port_csp0_shadow, CONFIG_ETRAX_SHUTDOWN_BIT, 1)
+#else
+#define SOFT_SHUTDOWN()
+#endif
+
+/* Console I/O for simulated etrax100.  Use #ifdef so erroneous
+   use will be evident. */
+#ifdef CONFIG_SVINTO_SIM
+  /* Let's use the ucsim interface since it lets us do write(2, ...) */
+#define SIMCOUT(s,len)							\
+  asm ("moveq 4,$r9	\n\t"						\
+       "moveq 2,$r10	\n\t"						\
+       "move.d %0,$r11	\n\t"						\
+       "move.d %1,$r12	\n\t"						\
+       "push $irp	\n\t"						\
+       "move 0f,$irp	\n\t"						\
+       "jump -6809	\n"						\
+       "0:		\n\t"						\
+       "pop $irp"							\
+       : : "rm" (s), "rm" (len) : "r9","r10","r11","r12","memory")
+#define TRACE_ON() __extension__ \
+ ({ int _Foofoo; __asm__ volatile ("bmod [%0],%0" : "=r" (_Foofoo) : "0" \
+			       (255)); _Foofoo; })
+
+#define TRACE_OFF() do { __asm__ volatile ("bmod [%0],%0" :: "r" (254)); } while (0)
+#define SIM_END() do { __asm__ volatile ("bmod [%0],%0" :: "r" (28)); } while (0)
+#define CRIS_CYCLES() __extension__ \
+ ({ unsigned long c; asm ("bmod [%1],%0" : "=r" (c) : "r" (27)); c;})
+#endif /* ! defined CONFIG_SVINTO_SIM */
+
+#endif