Merge with master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6.git

4 files changed, 89 insertions, 16 deletions

diff --git a/include/asm-arm/arch-imx/imx-regs.h b/include/asm-arm/arch-imx/imx-regs.h
index f32c203952cf..93b840e8fa60 100644
--- a/include/asm-arm/arch-imx/imx-regs.h
+++ b/include/asm-arm/arch-imx/imx-regs.h
@@ -228,6 +228,30 @@
 #define PD31_BIN_SPI2_TXD    ( GPIO_PORTD | GPIO_BIN | 31 )
 
 /*
+ * PWM controller
+ */
+#define PWMC	__REG(IMX_PWM_BASE + 0x00)	/* PWM Control Register		*/
+#define PWMS	__REG(IMX_PWM_BASE + 0x04)	/* PWM Sample Register		*/
+#define PWMP	__REG(IMX_PWM_BASE + 0x08)	/* PWM Period Register		*/
+#define PWMCNT	__REG(IMX_PWM_BASE + 0x0C)	/* PWM Counter Register		*/
+
+#define PWMC_HCTR		(0x01<<18)		/* Halfword FIFO Data Swapping	*/
+#define PWMC_BCTR		(0x01<<17)		/* Byte FIFO Data Swapping	*/
+#define PWMC_SWR		(0x01<<16)		/* Software Reset		*/
+#define PWMC_CLKSRC		(0x01<<15)		/* Clock Source			*/
+#define PWMC_PRESCALER(x)	(((x-1) & 0x7F) << 8)	/* PRESCALER			*/
+#define PWMC_IRQ		(0x01<< 7)		/* Interrupt Request		*/
+#define PWMC_IRQEN		(0x01<< 6)		/* Interrupt Request Enable	*/
+#define PWMC_FIFOAV		(0x01<< 5)		/* FIFO Available		*/
+#define PWMC_EN			(0x01<< 4)		/* Enables/Disables the PWM	*/
+#define PWMC_REPEAT(x)		(((x) & 0x03) << 2)	/* Sample Repeats		*/
+#define PWMC_CLKSEL(x)		(((x) & 0x03) << 0)	/* Clock Selection		*/
+
+#define PWMS_SAMPLE(x)		((x) & 0xFFFF)		/* Contains a two-sample word	*/
+#define PWMP_PERIOD(x)		((x) & 0xFFFF)		/* Represents the PWM's period	*/
+#define PWMC_COUNTER(x)		((x) & 0xFFFF)		/* Represents the current count value	*/
+
+/*
  *  DMA Controller
  */
 #define DCR     __REG(IMX_DMAC_BASE +0x00)	/* DMA Control Register */
diff --git a/include/asm-arm/arch-s3c2410/regs-nand.h b/include/asm-arm/arch-s3c2410/regs-nand.h
index c443ac834698..7cff235e667a 100644
--- a/include/asm-arm/arch-s3c2410/regs-nand.h
+++ b/include/asm-arm/arch-s3c2410/regs-nand.h
@@ -1,16 +1,17 @@
 /* linux/include/asm-arm/arch-s3c2410/regs-nand.h
  *
- * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
+ * Copyright (c) 2004,2005 Simtec Electronics <linux@simtec.co.uk>
  *		      http://www.simtec.co.uk/products/SWLINUX/
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
- * S3C2410 clock register definitions
+ * S3C2410 NAND register definitions
  *
  *  Changelog:
  *    18-Aug-2004    BJD     Copied file from 2.4 and updated
+ *    01-May-2005    BJD     Added definitions for s3c2440 controller
 */
 
 #ifndef __ASM_ARM_REGS_NAND
@@ -26,6 +27,22 @@
 #define S3C2410_NFSTAT  S3C2410_NFREG(0x10)
 #define S3C2410_NFECC   S3C2410_NFREG(0x14)
 
+#define S3C2440_NFCONT   S3C2410_NFREG(0x04)
+#define S3C2440_NFCMD    S3C2410_NFREG(0x08)
+#define S3C2440_NFADDR   S3C2410_NFREG(0x0C)
+#define S3C2440_NFDATA   S3C2410_NFREG(0x10)
+#define S3C2440_NFECCD0  S3C2410_NFREG(0x14)
+#define S3C2440_NFECCD1  S3C2410_NFREG(0x18)
+#define S3C2440_NFECCD   S3C2410_NFREG(0x1C)
+#define S3C2440_NFSTAT   S3C2410_NFREG(0x20)
+#define S3C2440_NFESTAT0 S3C2410_NFREG(0x24)
+#define S3C2440_NFESTAT1 S3C2410_NFREG(0x28)
+#define S3C2440_NFMECC0  S3C2410_NFREG(0x2C)
+#define S3C2440_NFMECC1  S3C2410_NFREG(0x30)
+#define S3C2440_NFSECC   S3C2410_NFREG(0x34)
+#define S3C2440_NFSBLK   S3C2410_NFREG(0x38)
+#define S3C2440_NFEBLK   S3C2410_NFREG(0x3C)
+
 #define S3C2410_NFCONF_EN          (1<<15)
 #define S3C2410_NFCONF_512BYTE     (1<<14)
 #define S3C2410_NFCONF_4STEP       (1<<13)
@@ -37,7 +54,28 @@
 
 #define S3C2410_NFSTAT_BUSY        (1<<0)
 
-/* think ECC can only be 8bit read? */
+#define S3C2440_NFCONF_BUSWIDTH_8	(0<<0)
+#define S3C2440_NFCONF_BUSWIDTH_16	(1<<0)
+#define S3C2440_NFCONF_ADVFLASH		(1<<3)
+#define S3C2440_NFCONF_TACLS(x)		((x)<<12)
+#define S3C2440_NFCONF_TWRPH0(x)	((x)<<8)
+#define S3C2440_NFCONF_TWRPH1(x)	((x)<<4)
+
+#define S3C2440_NFCONT_LOCKTIGHT	(1<<13)
+#define S3C2440_NFCONT_SOFTLOCK		(1<<12)
+#define S3C2440_NFCONT_ILLEGALACC_EN	(1<<10)
+#define S3C2440_NFCONT_RNBINT_EN	(1<<9)
+#define S3C2440_NFCONT_RN_FALLING	(1<<8)
+#define S3C2440_NFCONT_SPARE_ECCLOCK	(1<<6)
+#define S3C2440_NFCONT_MAIN_ECCLOCK	(1<<5)
+#define S3C2440_NFCONT_INITECC		(1<<4)
+#define S3C2440_NFCONT_nFCE		(1<<1)
+#define S3C2440_NFCONT_ENABLE		(1<<0)
+
+#define S3C2440_NFSTAT_READY		(1<<0)
+#define S3C2440_NFSTAT_nCE		(1<<1)
+#define S3C2440_NFSTAT_RnB_CHANGE	(1<<2)
+#define S3C2440_NFSTAT_ILLEGAL_ACCESS	(1<<3)
 
 #endif /* __ASM_ARM_REGS_NAND */
 
diff --git a/include/asm-arm/page.h b/include/asm-arm/page.h
index 4ca3a8e9348f..019c45d75730 100644
--- a/include/asm-arm/page.h
+++ b/include/asm-arm/page.h
@@ -114,19 +114,8 @@ extern void __cpu_copy_user_page(void *to, const void *from,
 				 unsigned long user);
 #endif
 
-#define clear_user_page(addr,vaddr,pg)			\
-	do {						\
-		preempt_disable();			\
-		__cpu_clear_user_page(addr, vaddr);	\
-		preempt_enable();			\
-	} while (0)
-
-#define copy_user_page(to,from,vaddr,pg)		\
-	do {						\
-		preempt_disable();			\
-		__cpu_copy_user_page(to, from, vaddr);	\
-		preempt_enable();			\
-	} while (0)
+#define clear_user_page(addr,vaddr,pg)	 __cpu_clear_user_page(addr, vaddr)
+#define copy_user_page(to,from,vaddr,pg) __cpu_copy_user_page(to, from, vaddr)
 
 #define clear_page(page)	memzero((void *)(page), PAGE_SIZE)
 extern void copy_page(void *to, const void *from);
@@ -171,6 +160,9 @@ typedef unsigned long pgprot_t;
 
 #endif /* STRICT_MM_TYPECHECKS */
 
+/* the upper-most page table pointer */
+extern pmd_t *top_pmd;
+
 /* Pure 2^n version of get_order */
 static inline int get_order(unsigned long size)
 {
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index c3fb5984f250..d6025af7efac 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -479,6 +479,25 @@ uart_handle_cts_change(struct uart_port *port, unsigned int status)
 	}
 }
 
+#include <linux/tty_flip.h>
+
+static inline void
+uart_insert_char(struct uart_port *port, unsigned int status,
+		 unsigned int overrun, unsigned int ch, unsigned int flag)
+{
+	struct tty_struct *tty = port->info->tty;
+
+	if ((status & port->ignore_status_mask & ~overrun) == 0)
+		tty_insert_flip_char(tty, ch, flag);
+
+	/*
+	 * Overrun is special.  Since it's reported immediately,
+	 * it doesn't affect the current character.
+	 */
+	if (status & ~port->ignore_status_mask & overrun)
+		tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+}
+
 /*
  *	UART_ENABLE_MS - determine if port should enable modem status irqs
  */