diff options
27 files changed, 385 insertions, 554 deletions
diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c index 4c38bd8bc298..b713c44c6fb4 100644 --- a/arch/arm/kernel/armksyms.c +++ b/arch/arm/kernel/armksyms.c @@ -30,9 +30,6 @@ extern void __lshrdi3(void); extern void __modsi3(void); extern void __muldi3(void); extern void __ucmpdi2(void); -extern void __udivdi3(void); -extern void __umoddi3(void); -extern void __udivmoddi4(void); extern void __udivsi3(void); extern void __umodsi3(void); extern void __do_div64(void); @@ -134,9 +131,6 @@ EXPORT_SYMBOL(__lshrdi3); EXPORT_SYMBOL(__modsi3); EXPORT_SYMBOL(__muldi3); EXPORT_SYMBOL(__ucmpdi2); -EXPORT_SYMBOL(__udivdi3); -EXPORT_SYMBOL(__umoddi3); -EXPORT_SYMBOL(__udivmoddi4); EXPORT_SYMBOL(__udivsi3); EXPORT_SYMBOL(__umodsi3); EXPORT_SYMBOL(__do_div64); diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 8cf733daa800..35b7273cfdb4 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -359,7 +359,8 @@ void cpu_init(void) "I" (offsetof(struct stack, abt[0])), "I" (PSR_F_BIT | PSR_I_BIT | UND_MODE), "I" (offsetof(struct stack, und[0])), - "I" (PSR_F_BIT | PSR_I_BIT | SVC_MODE)); + "I" (PSR_F_BIT | PSR_I_BIT | SVC_MODE) + : "r14"); } static struct machine_desc * __init setup_machine(unsigned int nr) diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 34892758f098..a931409c8fe4 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -502,3 +502,126 @@ int __init setup_profiling_timer(unsigned int multiplier) { return -EINVAL; } + +static int +on_each_cpu_mask(void (*func)(void *), void *info, int retry, int wait, + cpumask_t mask) +{ + int ret = 0; + + preempt_disable(); + + ret = smp_call_function_on_cpu(func, info, retry, wait, mask); + if (cpu_isset(smp_processor_id(), mask)) + func(info); + + preempt_enable(); + + return ret; +} + +/**********************************************************************/ + +/* + * TLB operations + */ +struct tlb_args { + struct vm_area_struct *ta_vma; + unsigned long ta_start; + unsigned long ta_end; +}; + +static inline void ipi_flush_tlb_all(void *ignored) +{ + local_flush_tlb_all(); +} + +static inline void ipi_flush_tlb_mm(void *arg) +{ + struct mm_struct *mm = (struct mm_struct *)arg; + + local_flush_tlb_mm(mm); +} + +static inline void ipi_flush_tlb_page(void *arg) +{ + struct tlb_args *ta = (struct tlb_args *)arg; + + local_flush_tlb_page(ta->ta_vma, ta->ta_start); +} + +static inline void ipi_flush_tlb_kernel_page(void *arg) +{ + struct tlb_args *ta = (struct tlb_args *)arg; + + local_flush_tlb_kernel_page(ta->ta_start); +} + +static inline void ipi_flush_tlb_range(void *arg) +{ + struct tlb_args *ta = (struct tlb_args *)arg; + + local_flush_tlb_range(ta->ta_vma, ta->ta_start, ta->ta_end); +} + +static inline void ipi_flush_tlb_kernel_range(void *arg) +{ + struct tlb_args *ta = (struct tlb_args *)arg; + + local_flush_tlb_kernel_range(ta->ta_start, ta->ta_end); +} + +void flush_tlb_all(void) +{ + on_each_cpu(ipi_flush_tlb_all, NULL, 1, 1); +} + +void flush_tlb_mm(struct mm_struct *mm) +{ + cpumask_t mask = mm->cpu_vm_mask; + + on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, 1, mask); +} + +void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr) +{ + cpumask_t mask = vma->vm_mm->cpu_vm_mask; + struct tlb_args ta; + + ta.ta_vma = vma; + ta.ta_start = uaddr; + + on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, 1, mask); +} + +void flush_tlb_kernel_page(unsigned long kaddr) +{ + struct tlb_args ta; + + ta.ta_start = kaddr; + + on_each_cpu(ipi_flush_tlb_kernel_page, &ta, 1, 1); +} + +void flush_tlb_range(struct vm_area_struct *vma, + unsigned long start, unsigned long end) +{ + cpumask_t mask = vma->vm_mm->cpu_vm_mask; + struct tlb_args ta; + + ta.ta_vma = vma; + ta.ta_start = start; + ta.ta_end = end; + + on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, 1, mask); +} + +void flush_tlb_kernel_range(unsigned long start, unsigned long end) +{ + struct tlb_args ta; + + ta.ta_start = start; + ta.ta_end = end; + + on_each_cpu(ipi_flush_tlb_kernel_range, &ta, 1, 1); +} diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index c0e65833ffc4..8725d63e4219 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -11,7 +11,7 @@ lib-y := backtrace.o changebit.o csumipv6.o csumpartial.o \ strnlen_user.o strchr.o strrchr.o testchangebit.o \ testclearbit.o testsetbit.o uaccess.o getuser.o \ putuser.o ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \ - ucmpdi2.o udivdi3.o lib1funcs.o div64.o \ + ucmpdi2.o lib1funcs.o div64.o \ io-readsb.o io-writesb.o io-readsl.o io-writesl.o ifeq ($(CONFIG_CPU_32v3),y) diff --git a/arch/arm/lib/longlong.h b/arch/arm/lib/longlong.h deleted file mode 100644 index 90ae647e4d76..000000000000 --- a/arch/arm/lib/longlong.h +++ /dev/null @@ -1,183 +0,0 @@ -/* longlong.h -- based on code from gcc-2.95.3 - - definitions for mixed size 32/64 bit arithmetic. - Copyright (C) 1991, 92, 94, 95, 96, 1997, 1998 Free Software Foundation, Inc. - - This definition file is free software; you can redistribute it - and/or modify it under the terms of the GNU General Public - License as published by the Free Software Foundation; either - version 2, or (at your option) any later version. - - This definition file is distributed in the hope that it will be - useful, but WITHOUT ANY WARRANTY; without even the implied - warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - See the GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place - Suite 330, - Boston, MA 02111-1307, USA. */ - -/* Borrowed from GCC 2.95.3, I Molton 29/07/01 */ - -#ifndef SI_TYPE_SIZE -#define SI_TYPE_SIZE 32 -#endif - -#define __BITS4 (SI_TYPE_SIZE / 4) -#define __ll_B (1L << (SI_TYPE_SIZE / 2)) -#define __ll_lowpart(t) ((u32) (t) % __ll_B) -#define __ll_highpart(t) ((u32) (t) / __ll_B) - -/* Define auxiliary asm macros. - - 1) umul_ppmm(high_prod, low_prod, multipler, multiplicand) - multiplies two u32 integers MULTIPLER and MULTIPLICAND, - and generates a two-part u32 product in HIGH_PROD and - LOW_PROD. - - 2) __umulsidi3(a,b) multiplies two u32 integers A and B, - and returns a u64 product. This is just a variant of umul_ppmm. - - 3) udiv_qrnnd(quotient, remainder, high_numerator, low_numerator, - denominator) divides a two-word unsigned integer, composed by the - integers HIGH_NUMERATOR and LOW_NUMERATOR, by DENOMINATOR and - places the quotient in QUOTIENT and the remainder in REMAINDER. - HIGH_NUMERATOR must be less than DENOMINATOR for correct operation. - If, in addition, the most significant bit of DENOMINATOR must be 1, - then the pre-processor symbol UDIV_NEEDS_NORMALIZATION is defined to 1. - - 4) sdiv_qrnnd(quotient, remainder, high_numerator, low_numerator, - denominator). Like udiv_qrnnd but the numbers are signed. The - quotient is rounded towards 0. - - 5) count_leading_zeros(count, x) counts the number of zero-bits from - the msb to the first non-zero bit. This is the number of steps X - needs to be shifted left to set the msb. Undefined for X == 0. - - 6) add_ssaaaa(high_sum, low_sum, high_addend_1, low_addend_1, - high_addend_2, low_addend_2) adds two two-word unsigned integers, - composed by HIGH_ADDEND_1 and LOW_ADDEND_1, and HIGH_ADDEND_2 and - LOW_ADDEND_2 respectively. The result is placed in HIGH_SUM and - LOW_SUM. Overflow (i.e. carry out) is not stored anywhere, and is - lost. - - 7) sub_ddmmss(high_difference, low_difference, high_minuend, - low_minuend, high_subtrahend, low_subtrahend) subtracts two - two-word unsigned integers, composed by HIGH_MINUEND_1 and - LOW_MINUEND_1, and HIGH_SUBTRAHEND_2 and LOW_SUBTRAHEND_2 - respectively. The result is placed in HIGH_DIFFERENCE and - LOW_DIFFERENCE. Overflow (i.e. carry out) is not stored anywhere, - and is lost. - - If any of these macros are left undefined for a particular CPU, - C macros are used. */ - -#if defined (__arm__) -#define add_ssaaaa(sh, sl, ah, al, bh, bl) \ - __asm__ ("adds %1, %4, %5 \n\ - adc %0, %2, %3" \ - : "=r" ((u32) (sh)), \ - "=&r" ((u32) (sl)) \ - : "%r" ((u32) (ah)), \ - "rI" ((u32) (bh)), \ - "%r" ((u32) (al)), \ - "rI" ((u32) (bl))) -#define sub_ddmmss(sh, sl, ah, al, bh, bl) \ - __asm__ ("subs %1, %4, %5 \n\ - sbc %0, %2, %3" \ - : "=r" ((u32) (sh)), \ - "=&r" ((u32) (sl)) \ - : "r" ((u32) (ah)), \ - "rI" ((u32) (bh)), \ - "r" ((u32) (al)), \ - "rI" ((u32) (bl))) -#define umul_ppmm(xh, xl, a, b) \ -{register u32 __t0, __t1, __t2; \ - __asm__ ("%@ Inlined umul_ppmm \n\ - mov %2, %5, lsr #16 \n\ - mov %0, %6, lsr #16 \n\ - bic %3, %5, %2, lsl #16 \n\ - bic %4, %6, %0, lsl #16 \n\ - mul %1, %3, %4 \n\ - mul %4, %2, %4 \n\ - mul %3, %0, %3 \n\ - mul %0, %2, %0 \n\ - adds %3, %4, %3 \n\ - addcs %0, %0, #65536 \n\ - adds %1, %1, %3, lsl #16 \n\ - adc %0, %0, %3, lsr #16" \ - : "=&r" ((u32) (xh)), \ - "=r" ((u32) (xl)), \ - "=&r" (__t0), "=&r" (__t1), "=r" (__t2) \ - : "r" ((u32) (a)), \ - "r" ((u32) (b)));} -#define UMUL_TIME 20 -#define UDIV_TIME 100 -#endif /* __arm__ */ - -#define __umulsidi3(u, v) \ - ({DIunion __w; \ - umul_ppmm (__w.s.high, __w.s.low, u, v); \ - __w.ll; }) - -#define __udiv_qrnnd_c(q, r, n1, n0, d) \ - do { \ - u32 __d1, __d0, __q1, __q0; \ - u32 __r1, __r0, __m; \ - __d1 = __ll_highpart (d); \ - __d0 = __ll_lowpart (d); \ - \ - __r1 = (n1) % __d1; \ - __q1 = (n1) / __d1; \ - __m = (u32) __q1 * __d0; \ - __r1 = __r1 * __ll_B | __ll_highpart (n0); \ - if (__r1 < __m) \ - { \ - __q1--, __r1 += (d); \ - if (__r1 >= (d)) /* i.e. we didn't get carry when adding to __r1 */\ - if (__r1 < __m) \ - __q1--, __r1 += (d); \ - } \ - __r1 -= __m; \ - \ - __r0 = __r1 % __d1; \ - __q0 = __r1 / __d1; \ - __m = (u32) __q0 * __d0; \ - __r0 = __r0 * __ll_B | __ll_lowpart (n0); \ - if (__r0 < __m) \ - { \ - __q0--, __r0 += (d); \ - if (__r0 >= (d)) \ - if (__r0 < __m) \ - __q0--, __r0 += (d); \ - } \ - __r0 -= __m; \ - \ - (q) = (u32) __q1 * __ll_B | __q0; \ - (r) = __r0; \ - } while (0) - -#define UDIV_NEEDS_NORMALIZATION 1 -#define udiv_qrnnd __udiv_qrnnd_c - -#define count_leading_zeros(count, x) \ - do { \ - u32 __xr = (x); \ - u32 __a; \ - \ - if (SI_TYPE_SIZE <= 32) \ - { \ - __a = __xr < ((u32)1<<2*__BITS4) \ - ? (__xr < ((u32)1<<__BITS4) ? 0 : __BITS4) \ - : (__xr < ((u32)1<<3*__BITS4) ? 2*__BITS4 : 3*__BITS4); \ - } \ - else \ - { \ - for (__a = SI_TYPE_SIZE - 8; __a > 0; __a -= 8) \ - if (((__xr >> __a) & 0xff) != 0) \ - break; \ - } \ - \ - (count) = SI_TYPE_SIZE - (__clz_tab[__xr >> __a] + __a); \ - } while (0) diff --git a/arch/arm/lib/udivdi3.c b/arch/arm/lib/udivdi3.c deleted file mode 100644 index e343be4c6642..000000000000 --- a/arch/arm/lib/udivdi3.c +++ /dev/null @@ -1,222 +0,0 @@ -/* More subroutines needed by GCC output code on some machines. */ -/* Compile this one with gcc. */ -/* Copyright (C) 1989, 92-98, 1999 Free Software Foundation, Inc. - -This file is part of GNU CC. - -GNU CC is free software; you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation; either version 2, or (at your option) -any later version. - -GNU CC is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with GNU CC; see the file COPYING. If not, write to -the Free Software Foundation, 59 Temple Place - Suite 330, -Boston, MA 02111-1307, USA. */ - -/* As a special exception, if you link this library with other files, - some of which are compiled with GCC, to produce an executable, - this library does not by itself cause the resulting executable - to be covered by the GNU General Public License. - This exception does not however invalidate any other reasons why - the executable file might be covered by the GNU General Public License. - */ -/* support functions required by the kernel. based on code from gcc-2.95.3 */ -/* I Molton 29/07/01 */ - -#include "gcclib.h" -#include "longlong.h" - -static const u8 __clz_tab[] = { - 0, 1, 2, 2, 3, 3, 3, 3, 4, 4, 4, 4, 4, 4, 4, 4, 5, 5, 5, 5, 5, 5, 5, 5, - 5, 5, 5, 5, 5, 5, 5, 5, - 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, - 6, 6, 6, 6, 6, 6, 6, 6, - 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, - 7, 7, 7, 7, 7, 7, 7, 7, - 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, - 7, 7, 7, 7, 7, 7, 7, 7, - 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, - 8, 8, 8, 8, 8, 8, 8, 8, - 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, - 8, 8, 8, 8, 8, 8, 8, 8, - 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, - 8, 8, 8, 8, 8, 8, 8, 8, - 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, - 8, 8, 8, 8, 8, 8, 8, 8, -}; - -u64 __udivmoddi4(u64 n, u64 d, u64 * rp) -{ - DIunion ww; - DIunion nn, dd; - DIunion rr; - u32 d0, d1, n0, n1, n2; - u32 q0, q1; - u32 b, bm; - - nn.ll = n; - dd.ll = d; - - d0 = dd.s.low; - d1 = dd.s.high; - n0 = nn.s.low; - n1 = nn.s.high; - - if (d1 == 0) { - if (d0 > n1) { - /* 0q = nn / 0D */ - - count_leading_zeros(bm, d0); - - if (bm != 0) { - /* Normalize, i.e. make the most significant bit of the - denominator set. */ - - d0 = d0 << bm; - n1 = (n1 << bm) | (n0 >> (SI_TYPE_SIZE - bm)); - n0 = n0 << bm; - } - - udiv_qrnnd(q0, n0, n1, n0, d0); - q1 = 0; - - /* Remainder in n0 >> bm. */ - } else { - /* qq = NN / 0d */ - - if (d0 == 0) - d0 = 1 / d0; /* Divide intentionally by zero. */ - - count_leading_zeros(bm, d0); - - if (bm == 0) { - /* From (n1 >= d0) /\ (the most significant bit of d0 is set), - conclude (the most significant bit of n1 is set) /\ (the - leading quotient digit q1 = 1). - - This special case is necessary, not an optimization. - (Shifts counts of SI_TYPE_SIZE are undefined.) */ - - n1 -= d0; - q1 = 1; - } else { - /* Normalize. */ - - b = SI_TYPE_SIZE - bm; - - d0 = d0 << bm; - n2 = n1 >> b; - n1 = (n1 << bm) | (n0 >> b); - n0 = n0 << bm; - - udiv_qrnnd(q1, n1, n2, n1, d0); - } - - /* n1 != d0... */ - - udiv_qrnnd(q0, n0, n1, n0, d0); - - /* Remainder in n0 >> bm. */ - } - - if (rp != 0) { - rr.s.low = n0 >> bm; - rr.s.high = 0; - *rp = rr.ll; - } - } else { - if (d1 > n1) { - /* 00 = nn / DD */ - - q0 = 0; - q1 = 0; - - /* Remainder in n1n0. */ - if (rp != 0) { - rr.s.low = n0; - rr.s.high = n1; - *rp = rr.ll; - } - } else { - /* 0q = NN / dd */ - - count_leading_zeros(bm, d1); - if (bm == 0) { - /* From (n1 >= d1) /\ (the most significant bit of d1 is set), - conclude (the most significant bit of n1 is set) /\ (the - quotient digit q0 = 0 or 1). - - This special case is necessary, not an optimization. */ - - /* The condition on the next line takes advantage of that - n1 >= d1 (true due to program flow). */ - if (n1 > d1 || n0 >= d0) { - q0 = 1; - sub_ddmmss(n1, n0, n1, n0, d1, d0); - } else - q0 = 0; - - q1 = 0; - - if (rp != 0) { - rr.s.low = n0; - rr.s.high = n1; - *rp = rr.ll; - } - } else { - u32 m1, m0; - /* Normalize. */ - - b = SI_TYPE_SIZE - bm; - - d1 = (d1 << bm) | (d0 >> b); - d0 = d0 << bm; - n2 = n1 >> b; - n1 = (n1 << bm) | (n0 >> b); - n0 = n0 << bm; - - udiv_qrnnd(q0, n1, n2, n1, d1); - umul_ppmm(m1, m0, q0, d0); - - if (m1 > n1 || (m1 == n1 && m0 > n0)) { - q0--; - sub_ddmmss(m1, m0, m1, m0, d1, d0); - } - - q1 = 0; - - /* Remainder in (n1n0 - m1m0) >> bm. */ - if (rp != 0) { - sub_ddmmss(n1, n0, n1, n0, m1, m0); - rr.s.low = (n1 << b) | (n0 >> bm); - rr.s.high = n1 >> bm; - *rp = rr.ll; - } - } - } - } - - ww.s.low = q0; - ww.s.high = q1; - return ww.ll; -} - -u64 __udivdi3(u64 n, u64 d) -{ - return __udivmoddi4(n, d, (u64 *) 0); -} - -u64 __umoddi3(u64 u, u64 v) -{ - u64 w; - - (void)__udivmoddi4(u, v, &w); - - return w; -} diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index 9222e57bd872..dacbf504dae2 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -20,6 +20,7 @@ #include <asm/irq.h> #include <asm/io.h> #include <asm/hardware/amba.h> +#include <asm/hardware/arm_timer.h> #include <asm/arch/cm.h> #include <asm/system.h> #include <asm/leds.h> @@ -156,16 +157,6 @@ EXPORT_SYMBOL(cm_control); #define TICKS2USECS(x) ((x) / TICKS_PER_uSEC) #endif -/* - * What does it look like? - */ -typedef struct TimerStruct { - unsigned long TimerLoad; - unsigned long TimerValue; - unsigned long TimerControl; - unsigned long TimerClear; -} TimerStruct_t; - static unsigned long timer_reload; /* @@ -174,7 +165,6 @@ static unsigned long timer_reload; */ unsigned long integrator_gettimeoffset(void) { - volatile TimerStruct_t *timer1 = (TimerStruct_t *)TIMER1_VA_BASE; unsigned long ticks1, ticks2, status; /* @@ -183,11 +173,11 @@ unsigned long integrator_gettimeoffset(void) * an interrupt. We get around this by ensuring that the * counter has not reloaded between our two reads. */ - ticks2 = timer1->TimerValue & 0xffff; + ticks2 = readl(TIMER1_VA_BASE + TIMER_VALUE) & 0xffff; do { ticks1 = ticks2; status = __raw_readl(VA_IC_BASE + IRQ_RAW_STATUS); - ticks2 = timer1->TimerValue & 0xffff; + ticks2 = readl(TIMER1_VA_BASE + TIMER_VALUE) & 0xffff; } while (ticks2 > ticks1); /* @@ -213,14 +203,12 @@ unsigned long integrator_gettimeoffset(void) static irqreturn_t integrator_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) { - volatile TimerStruct_t *timer1 = (volatile TimerStruct_t *)TIMER1_VA_BASE; - write_seqlock(&xtime_lock); /* * clear the interrupt */ - timer1->TimerClear = 1; + writel(1, TIMER1_VA_BASE + TIMER_INTCLR); /* * the clock tick routines are only processed on the @@ -256,32 +244,29 @@ static struct irqaction integrator_timer_irq = { */ void __init integrator_time_init(unsigned long reload, unsigned int ctrl) { - volatile TimerStruct_t *timer0 = (volatile TimerStruct_t *)TIMER0_VA_BASE; - volatile TimerStruct_t *timer1 = (volatile TimerStruct_t *)TIMER1_VA_BASE; - volatile TimerStruct_t *timer2 = (volatile TimerStruct_t *)TIMER2_VA_BASE; - unsigned int timer_ctrl = 0x80 | 0x40; /* periodic */ + unsigned int timer_ctrl = TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC; timer_reload = reload; timer_ctrl |= ctrl; if (timer_reload > 0x100000) { timer_reload >>= 8; - timer_ctrl |= 0x08; /* /256 */ + timer_ctrl |= TIMER_CTRL_DIV256; } else if (timer_reload > 0x010000) { timer_reload >>= 4; - timer_ctrl |= 0x04; /* /16 */ + timer_ctrl |= TIMER_CTRL_DIV16; } /* * Initialise to a known state (all timers off) */ - timer0->TimerControl = 0; - timer1->TimerControl = 0; - timer2->TimerControl = 0; + writel(0, TIMER0_VA_BASE + TIMER_CTRL); + writel(0, TIMER1_VA_BASE + TIMER_CTRL); + writel(0, TIMER2_VA_BASE + TIMER_CTRL); - timer1->TimerLoad = timer_reload; - timer1->TimerValue = timer_reload; - timer1->TimerControl = timer_ctrl; + writel(timer_reload, TIMER1_VA_BASE + TIMER_LOAD); + writel(timer_reload, TIMER1_VA_BASE + TIMER_VALUE); + writel(timer_ctrl, TIMER1_VA_BASE + TIMER_CTRL); /* * Make irqs happen for the system timer diff --git a/arch/arm/mach-omap/pm.c b/arch/arm/mach-omap/pm.c index 00fac155df2a..6b03ccdc1e92 100644 --- a/arch/arm/mach-omap/pm.c +++ b/arch/arm/mach-omap/pm.c @@ -41,7 +41,9 @@ #include <linux/pm.h> #include <asm/io.h> +#include <asm/mach/time.h> #include <asm/mach-types.h> + #include <asm/arch/omap16xx.h> #include <asm/arch/pm.h> #include <asm/arch/mux.h> @@ -80,13 +82,13 @@ void omap_pm_idle(void) return; } mask32 = omap_readl(ARM_SYSST); - local_fiq_enable(); - local_irq_enable(); -#if defined(CONFIG_OMAP_32K_TIMER) && defined(CONFIG_NO_IDLE_HZ) - /* Override timer to use VST for the next cycle */ - omap_32k_timer_next_vst_interrupt(); -#endif + /* + * Since an interrupt may set up a timer, we don't want to + * reprogram the hardware timer with interrupts enabled. + * Re-enable interrupts only after returning from idle. + */ + timer_dyn_reprogram(); if ((mask32 & DSP_IDLE) == 0) { __asm__ volatile ("mcr p15, 0, r0, c7, c0, 4"); @@ -102,6 +104,8 @@ void omap_pm_idle(void) func_ptr(); } + local_fiq_enable(); + local_irq_enable(); } /* diff --git a/arch/arm/mach-omap/time.c b/arch/arm/mach-omap/time.c index 589e8b2740dd..dd34e9f4c413 100644 --- a/arch/arm/mach-omap/time.c +++ b/arch/arm/mach-omap/time.c @@ -4,7 +4,7 @@ * OMAP Timers * * Copyright (C) 2004 Nokia Corporation - * Partial timer rewrite and additional VST timer support by + * Partial timer rewrite and additional dynamic tick timer support by * Tony Lindgen <tony@atomide.com> and * Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> * @@ -261,7 +261,6 @@ unsigned long long sched_clock(void) * so with HZ = 100, TVR = 327.68. */ #define OMAP_32K_TIMER_TICK_PERIOD ((32768 / HZ) - 1) -#define MAX_SKIP_JIFFIES 25 #define TIMER_32K_SYNCHRONIZED 0xfffbc410 #define JIFFIES_TO_HW_TICKS(nr_jiffies, clock_rate) \ @@ -347,6 +346,42 @@ static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id, return IRQ_HANDLED; } +#ifdef CONFIG_NO_IDLE_HZ +/* + * Programs the next timer interrupt needed. Called when dynamic tick is + * enabled, and to reprogram the ticks to skip from pm_idle. Note that + * we can keep the timer continuous, and don't need to set it to run in + * one-shot mode. This is because the timer will get reprogrammed again + * after next interrupt. + */ +void omap_32k_timer_reprogram(unsigned long next_tick) +{ + omap_32k_timer_start(JIFFIES_TO_HW_TICKS(next_tick, 32768) + 1); +} + +static struct irqaction omap_32k_timer_irq; +extern struct timer_update_handler timer_update; + +static int omap_32k_timer_enable_dyn_tick(void) +{ + /* No need to reprogram timer, just use the next interrupt */ + return 0; +} + +static int omap_32k_timer_disable_dyn_tick(void) +{ + omap_32k_timer_start(OMAP_32K_TIMER_TICK_PERIOD); + return 0; +} + +static struct dyn_tick_timer omap_dyn_tick_timer = { + .enable = omap_32k_timer_enable_dyn_tick, + .disable = omap_32k_timer_disable_dyn_tick, + .reprogram = omap_32k_timer_reprogram, + .handler = omap_32k_timer_interrupt, +}; +#endif /* CONFIG_NO_IDLE_HZ */ + static struct irqaction omap_32k_timer_irq = { .name = "32KHz timer", .flags = SA_INTERRUPT | SA_TIMER, @@ -355,6 +390,11 @@ static struct irqaction omap_32k_timer_irq = { static __init void omap_init_32k_timer(void) { + +#ifdef CONFIG_NO_IDLE_HZ + omap_timer.dyn_tick = &omap_dyn_tick_timer; +#endif + setup_irq(INT_OS_TIMER, &omap_32k_timer_irq); omap_timer.offset = omap_32k_timer_gettimeoffset; omap_32k_last_tick = omap_32k_sync_timer_read(); diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index 534df0c6c770..d4d03d0daaec 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -154,6 +154,11 @@ config S3C2410_PM_CHECK_CHUNKSIZE the CRC data block will take more memory, but wil identify any faults with better precision. +config PM_SIMTEC + bool + depends on PM && (ARCH_BAST || MACH_VR1000) + default y + config S3C2410_LOWLEVEL_UART_PORT int "S3C2410 UART to use for low-level messages" default 0 diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile index 7c379aad5d62..f99b689e4392 100644 --- a/arch/arm/mach-s3c2410/Makefile +++ b/arch/arm/mach-s3c2410/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_S3C2410_DMA) += dma.o # Power Management support obj-$(CONFIG_PM) += pm.o sleep.o +obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o # S3C2440 support diff --git a/arch/arm/mach-s3c2410/devs.c b/arch/arm/mach-s3c2410/devs.c index 64792f678668..4664bd11adc1 100644 --- a/arch/arm/mach-s3c2410/devs.c +++ b/arch/arm/mach-s3c2410/devs.c @@ -96,8 +96,8 @@ struct platform_device s3c_device_lcd = { .num_resources = ARRAY_SIZE(s3c_lcd_resource), .resource = s3c_lcd_resource, .dev = { - .dma_mask = &s3c_device_lcd_dmamask, - .coherent_dma_mask = 0xffffffffUL + .dma_mask = &s3c_device_lcd_dmamask, + .coherent_dma_mask = 0xffffffffUL } }; diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index f3e970039b65..549bcb1f32c0 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -27,6 +27,7 @@ * 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA * 14-Mar-2006 BJD Updated for __iomem changes * 22-Jun-2006 BJD Added DM9000 platform information + * 28-Jun-2006 BJD Moved pm functionality out to common code */ #include <linux/kernel.h> @@ -67,7 +68,6 @@ #include "devs.h" #include "cpu.h" #include "usb-simtec.h" -#include "pm.h" #define COPYRIGHT ", (c) 2004-2005 Simtec Electronics" @@ -405,44 +405,13 @@ void __init bast_map_io(void) usb_simtec_init(); } -void __init bast_init_irq(void) -{ - s3c24xx_init_irq(); -} - -#ifdef CONFIG_PM - -/* bast_init_machine - * - * enable the power management functions for the EB2410ITX -*/ - -static __init void bast_init_machine(void) -{ - unsigned long gstatus4; - - printk(KERN_INFO "BAST Power Manangement" COPYRIGHT "\n"); - - gstatus4 = (__raw_readl(S3C2410_BANKCON7) & 0x3) << 30; - gstatus4 |= (__raw_readl(S3C2410_BANKCON6) & 0x3) << 28; - gstatus4 |= (__raw_readl(S3C2410_BANKSIZE) & S3C2410_BANKSIZE_MASK); - - __raw_writel(gstatus4, S3C2410_GSTATUS4); - - s3c2410_pm_init(); -} - -#else -#define bast_init_machine NULL -#endif - MACHINE_START(BAST, "Simtec-BAST") MAINTAINER("Ben Dooks <ben@simtec.co.uk>") BOOT_MEM(S3C2410_SDRAM_PA, S3C2410_PA_UART, (u32)S3C24XX_VA_UART) BOOT_PARAMS(S3C2410_SDRAM_PA + 0x100) - MAPIO(bast_map_io) - INITIRQ(bast_init_irq) - .init_machine = bast_init_machine, + + .map_io = bast_map_io, + .init_irq = s3c24xx_init_irq, .timer = &s3c24xx_timer, MACHINE_END diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c index 76be074944a0..1db2855e3e56 100644 --- a/arch/arm/mach-s3c2410/mach-vr1000.c +++ b/arch/arm/mach-s3c2410/mach-vr1000.c @@ -371,16 +371,12 @@ void __init vr1000_map_io(void) usb_simtec_init(); } -void __init vr1000_init_irq(void) -{ - s3c24xx_init_irq(); -} MACHINE_START(VR1000, "Thorcom-VR1000") MAINTAINER("Ben Dooks <ben@simtec.co.uk>") BOOT_MEM(S3C2410_SDRAM_PA, S3C2410_PA_UART, (u32)S3C24XX_VA_UART) BOOT_PARAMS(S3C2410_SDRAM_PA + 0x100) - MAPIO(vr1000_map_io) - INITIRQ(vr1000_init_irq) + .map_io = vr1000_map_io, + .init_irq = s3c24xx_init_irq, .timer = &s3c24xx_timer, MACHINE_END diff --git a/arch/arm/mach-s3c2410/pm-simtec.c b/arch/arm/mach-s3c2410/pm-simtec.c new file mode 100644 index 000000000000..2cb798832223 --- /dev/null +++ b/arch/arm/mach-s3c2410/pm-simtec.c @@ -0,0 +1,65 @@ +/* linux/arch/arm/mach-s3c2410/pm-simtec.c + * + * Copyright (c) 2004 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * http://armlinux.simtec.co.uk/ + * + * Power Management helpers for Simtec S3C24XX implementations + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/device.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <asm/hardware.h> +#include <asm/io.h> + +#include <asm/arch/map.h> +#include <asm/arch/regs-serial.h> +#include <asm/arch/regs-gpio.h> +#include <asm/arch/regs-mem.h> + +#include <asm/mach-types.h> + +#include "pm.h" + +#define COPYRIGHT ", (c) 2005 Simtec Electronics" + +/* pm_simtec_init + * + * enable the power management functions +*/ + +static __init int pm_simtec_init(void) +{ + unsigned long gstatus4; + + /* check which machine we are running on */ + + if (!machine_is_bast() && !machine_is_vr1000()) + return 0; + + printk(KERN_INFO "Simtec Board Power Manangement" COPYRIGHT "\n"); + + gstatus4 = (__raw_readl(S3C2410_BANKCON7) & 0x3) << 30; + gstatus4 |= (__raw_readl(S3C2410_BANKCON6) & 0x3) << 28; + gstatus4 |= (__raw_readl(S3C2410_BANKSIZE) & S3C2410_BANKSIZE_MASK); + + __raw_writel(gstatus4, S3C2410_GSTATUS4); + + return s3c2410_pm_init(); +} + +arch_initcall(pm_simtec_init); diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 9d1f2253e987..f01c0f8a2bb3 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -33,6 +33,7 @@ #include <asm/mach-types.h> #include <asm/hardware/amba.h> #include <asm/hardware/amba_clcd.h> +#include <asm/hardware/arm_timer.h> #include <asm/hardware/icst307.h> #include <asm/mach/arch.h> @@ -788,38 +789,25 @@ void __init versatile_init(void) */ #define TIMER_INTERVAL (TICKS_PER_uSEC * mSEC_10) #if TIMER_INTERVAL >= 0x100000 -#define TIMER_RELOAD (TIMER_INTERVAL >> 8) /* Divide by 256 */ -#define TIMER_CTRL 0x88 /* Enable, Clock / 256 */ +#define TIMER_RELOAD (TIMER_INTERVAL >> 8) +#define TIMER_DIVISOR (TIMER_CTRL_DIV256) #define TICKS2USECS(x) (256 * (x) / TICKS_PER_uSEC) #elif TIMER_INTERVAL >= 0x10000 #define TIMER_RELOAD (TIMER_INTERVAL >> 4) /* Divide by 16 */ -#define TIMER_CTRL 0x84 /* Enable, Clock / 16 */ +#define TIMER_DIVISOR (TIMER_CTRL_DIV16) #define TICKS2USECS(x) (16 * (x) / TICKS_PER_uSEC) #else #define TIMER_RELOAD (TIMER_INTERVAL) -#define TIMER_CTRL 0x80 /* Enable */ +#define TIMER_DIVISOR (TIMER_CTRL_DIV1) #define TICKS2USECS(x) ((x) / TICKS_PER_uSEC) #endif -#define TIMER_CTRL_IE (1 << 5) /* Interrupt Enable */ - -/* - * What does it look like? - */ -typedef struct TimerStruct { - unsigned long TimerLoad; - unsigned long TimerValue; - unsigned long TimerControl; - unsigned long TimerClear; -} TimerStruct_t; - /* * Returns number of ms since last clock interrupt. Note that interrupts * will have been disabled by do_gettimeoffset() */ static unsigned long versatile_gettimeoffset(void) { - volatile TimerStruct_t *timer0 = (TimerStruct_t *)TIMER0_VA_BASE; unsigned long ticks1, ticks2, status; /* @@ -828,11 +816,11 @@ static unsigned long versatile_gettimeoffset(void) * an interrupt. We get around this by ensuring that the * counter has not reloaded between our two reads. */ - ticks2 = timer0->TimerValue & 0xffff; + ticks2 = readl(TIMER0_VA_BASE + TIMER_VALUE) & 0xffff; do { ticks1 = ticks2; status = __raw_readl(VA_IC_BASE + VIC_IRQ_RAW_STATUS); - ticks2 = timer0->TimerValue & 0xffff; + ticks2 = readl(TIMER0_VA_BASE + TIMER_VALUE) & 0xffff; } while (ticks2 > ticks1); /* @@ -859,12 +847,10 @@ static unsigned long versatile_gettimeoffset(void) */ static irqreturn_t versatile_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) { - volatile TimerStruct_t *timer0 = (volatile TimerStruct_t *)TIMER0_VA_BASE; - write_seqlock(&xtime_lock); // ...clear the interrupt - timer0->TimerClear = 1; + writel(1, TIMER0_VA_BASE + TIMER_INTCLR); timer_tick(regs); @@ -884,31 +870,32 @@ static struct irqaction versatile_timer_irq = { */ static void __init versatile_timer_init(void) { - volatile TimerStruct_t *timer0 = (volatile TimerStruct_t *)TIMER0_VA_BASE; - volatile TimerStruct_t *timer1 = (volatile TimerStruct_t *)TIMER1_VA_BASE; - volatile TimerStruct_t *timer2 = (volatile TimerStruct_t *)TIMER2_VA_BASE; - volatile TimerStruct_t *timer3 = (volatile TimerStruct_t *)TIMER3_VA_BASE; + u32 val; /* * set clock frequency: * VERSATILE_REFCLK is 32KHz * VERSATILE_TIMCLK is 1MHz */ - *(volatile unsigned int *)IO_ADDRESS(VERSATILE_SCTL_BASE) |= - ((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) | (VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) | - (VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) | (VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel)); + val = readl(IO_ADDRESS(VERSATILE_SCTL_BASE)); + writel((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) | + (VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) | + (VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) | + (VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel) | val, + IO_ADDRESS(VERSATILE_SCTL_BASE)); /* * Initialise to a known state (all timers off) */ - timer0->TimerControl = 0; - timer1->TimerControl = 0; - timer2->TimerControl = 0; - timer3->TimerControl = 0; - - timer0->TimerLoad = TIMER_RELOAD; - timer0->TimerValue = TIMER_RELOAD; - timer0->TimerControl = TIMER_CTRL | 0x40 | TIMER_CTRL_IE; /* periodic + IE */ + writel(0, TIMER0_VA_BASE + TIMER_CTRL); + writel(0, TIMER1_VA_BASE + TIMER_CTRL); + writel(0, TIMER2_VA_BASE + TIMER_CTRL); + writel(0, TIMER3_VA_BASE + TIMER_CTRL); + + writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_LOAD); + writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_VALUE); + writel(TIMER_DIVISOR | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC | + TIMER_CTRL_IE, TIMER0_VA_BASE + TIMER_CTRL); /* * Make irqs happen for the system timer diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 6dcb23d64bf5..edffa47a4b2a 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -437,7 +437,7 @@ void __init paging_init(struct meminfo *mi, struct machine_desc *mdesc) memtable_init(mi); if (mdesc->map_io) mdesc->map_io(); - flush_tlb_all(); + local_flush_tlb_all(); /* * initialise the zones within each node diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c index 052ab443ec4e..c3bd503b43a2 100644 --- a/arch/arm/mm/mm-armv.c +++ b/arch/arm/mm/mm-armv.c @@ -682,7 +682,7 @@ void __init memtable_init(struct meminfo *mi) } flush_cache_all(); - flush_tlb_all(); + local_flush_tlb_all(); top_pmd = pmd_off_k(0xffff0000); } diff --git a/arch/arm/vfp/vfp.h b/arch/arm/vfp/vfp.h index 55a02bc994a3..4b97950984e9 100644 --- a/arch/arm/vfp/vfp.h +++ b/arch/arm/vfp/vfp.h @@ -117,7 +117,13 @@ static inline u64 vfp_estimate_div128to64(u64 nh, u64 nl, u64 m) if (nh >= m) return ~0ULL; mh = m >> 32; - z = (mh << 32 <= nh) ? 0xffffffff00000000ULL : (nh / mh) << 32; + if (mh << 32 <= nh) { + z = 0xffffffff00000000ULL; + } else { + z = nh; + do_div(z, mh); + z <<= 32; + } mul64to128(&termh, &terml, m, z); sub128(&remh, &reml, nh, nl, termh, terml); ml = m << 32; @@ -126,7 +132,12 @@ static inline u64 vfp_estimate_div128to64(u64 nh, u64 nl, u64 m) add128(&remh, &reml, remh, reml, mh, ml); } remh = (remh << 32) | (reml >> 32); - z |= (mh << 32 <= remh) ? 0xffffffff : remh / mh; + if (mh << 32 <= remh) { + z |= 0xffffffff; + } else { + do_div(remh, mh); + z |= remh; + } return z; } diff --git a/arch/arm/vfp/vfpdouble.c b/arch/arm/vfp/vfpdouble.c index fa3053e84db5..b801cd66b6ea 100644 --- a/arch/arm/vfp/vfpdouble.c +++ b/arch/arm/vfp/vfpdouble.c @@ -32,6 +32,8 @@ */ #include <linux/kernel.h> #include <linux/bitops.h> + +#include <asm/div64.h> #include <asm/ptrace.h> #include <asm/vfp.h> diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index 3aeedd2afc70..22f3da4e0829 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -89,7 +89,7 @@ void vfp_raise_sigfpe(unsigned int sicode, struct pt_regs *regs) current->thread.error_code = 0; current->thread.trap_no = 6; - force_sig_info(SIGFPE, &info, current); + send_sig_info(SIGFPE, &info, current); } static void vfp_panic(char *reason) diff --git a/arch/arm/vfp/vfpsingle.c b/arch/arm/vfp/vfpsingle.c index 6849fe35cb2e..14dd696ddeb1 100644 --- a/arch/arm/vfp/vfpsingle.c +++ b/arch/arm/vfp/vfpsingle.c @@ -32,6 +32,8 @@ */ #include <linux/kernel.h> #include <linux/bitops.h> + +#include <asm/div64.h> #include <asm/ptrace.h> #include <asm/vfp.h> @@ -303,7 +305,11 @@ u32 vfp_estimate_sqrt_significand(u32 exponent, u32 significand) if (z <= a) return (s32)a >> 1; } - return (u32)(((u64)a << 31) / z) + (z >> 1); + { + u64 v = (u64)a << 31; + do_div(v, z); + return v + (z >> 1); + } } static u32 vfp_single_fsqrt(int sd, int unused, s32 m, u32 fpscr) @@ -1107,7 +1113,11 @@ static u32 vfp_single_fdiv(int sd, int sn, s32 m, u32 fpscr) vsn.significand >>= 1; vsd.exponent++; } - vsd.significand = ((u64)vsn.significand << 32) / vsm.significand; + { + u64 significand = (u64)vsn.significand << 32; + do_div(significand, vsm.significand); + vsd.significand = significand; + } if ((vsd.significand & 0x3f) == 0) vsd.significand |= ((u64)vsm.significand * vsd.significand != (u64)vsn.significand << 32); diff --git a/drivers/net/arm/etherh.c b/drivers/net/arm/etherh.c index 2e28c201dcc0..942a2819576c 100644 --- a/drivers/net/arm/etherh.c +++ b/drivers/net/arm/etherh.c @@ -68,7 +68,6 @@ struct etherh_priv { void __iomem *dma_base; unsigned int id; void __iomem *ctrl_port; - void __iomem *base; unsigned char ctrl; u32 supported; }; @@ -178,7 +177,7 @@ etherh_setif(struct net_device *dev) switch (etherh_priv(dev)->id) { case PROD_I3_ETHERLAN600: case PROD_I3_ETHERLAN600A: - addr = etherh_priv(dev)->base + EN0_RCNTHI; + addr = (void *)dev->base_addr + EN0_RCNTHI; switch (dev->if_port) { case IF_PORT_10BASE2: @@ -219,7 +218,7 @@ etherh_getifstat(struct net_device *dev) switch (etherh_priv(dev)->id) { case PROD_I3_ETHERLAN600: case PROD_I3_ETHERLAN600A: - addr = etherh_priv(dev)->base + EN0_RCNTHI; + addr = (void *)dev->base_addr + EN0_RCNTHI; switch (dev->if_port) { case IF_PORT_10BASE2: stat = 1; @@ -282,7 +281,7 @@ static void etherh_reset(struct net_device *dev) { struct ei_device *ei_local = netdev_priv(dev); - void __iomem *addr = etherh_priv(dev)->base; + void __iomem *addr = (void *)dev->base_addr; writeb(E8390_NODMA+E8390_PAGE0+E8390_STOP, addr); @@ -328,7 +327,7 @@ etherh_block_output (struct net_device *dev, int count, const unsigned char *buf ei_local->dmaing = 1; - addr = etherh_priv(dev)->base; + addr = (void *)dev->base_addr; dma_base = etherh_priv(dev)->dma_base; count = (count + 1) & ~1; @@ -388,7 +387,7 @@ etherh_block_input (struct net_device *dev, int count, struct sk_buff *skb, int ei_local->dmaing = 1; - addr = etherh_priv(dev)->base; + addr = (void *)dev->base_addr; dma_base = etherh_priv(dev)->dma_base; buf = skb->data; @@ -428,7 +427,7 @@ etherh_get_header (struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_p ei_local->dmaing = 1; - addr = etherh_priv(dev)->base; + addr = (void *)dev->base_addr; dma_base = etherh_priv(dev)->dma_base; writeb (E8390_NODMA | E8390_PAGE0 | E8390_START, addr + E8390_CMD); @@ -697,8 +696,7 @@ etherh_probe(struct expansion_card *ec, const struct ecard_id *id) eh->ctrl_port = eh->ioc_fast; } - eh->base = eh->memc + data->ns8390_offset; - dev->base_addr = (unsigned long)eh->base; + dev->base_addr = (unsigned long)eh->memc + data->ns8390_offset; eh->dma_base = eh->memc + data->dataport_offset; eh->ctrl_port += data->ctrlport_offset; diff --git a/include/asm-arm/arch-pxa/debug-macro.S b/include/asm-arm/arch-pxa/debug-macro.S index f288e74b67c2..b6ec68879176 100644 --- a/include/asm-arm/arch-pxa/debug-macro.S +++ b/include/asm-arm/arch-pxa/debug-macro.S @@ -11,6 +11,8 @@ * */ +#include "hardware.h" + .macro addruart,rx mrc p15, 0, \rx, c1, c0 tst \rx, #1 @ MMU enabled? diff --git a/include/asm-arm/hardware/arm_timer.h b/include/asm-arm/hardware/arm_timer.h new file mode 100644 index 000000000000..04be3bdf46b8 --- /dev/null +++ b/include/asm-arm/hardware/arm_timer.h @@ -0,0 +1,21 @@ +#ifndef __ASM_ARM_HARDWARE_ARM_TIMER_H +#define __ASM_ARM_HARDWARE_ARM_TIMER_H + +#define TIMER_LOAD 0x00 +#define TIMER_VALUE 0x04 +#define TIMER_CTRL 0x08 +#define TIMER_CTRL_ONESHOT (1 << 0) +#define TIMER_CTRL_32BIT (1 << 1) +#define TIMER_CTRL_DIV1 (0 << 2) +#define TIMER_CTRL_DIV16 (1 << 2) +#define TIMER_CTRL_DIV256 (2 << 2) +#define TIMER_CTRL_IE (1 << 5) /* Interrupt Enable (versatile only) */ +#define TIMER_CTRL_PERIODIC (1 << 6) +#define TIMER_CTRL_ENABLE (1 << 7) + +#define TIMER_INTCLR 0x0c +#define TIMER_RIS 0x10 +#define TIMER_MIS 0x14 +#define TIMER_BGLOAD 0x18 + +#endif diff --git a/include/asm-arm/system.h b/include/asm-arm/system.h index 3d0d2860b6db..cdf49f442fd2 100644 --- a/include/asm-arm/system.h +++ b/include/asm-arm/system.h @@ -290,7 +290,6 @@ do { \ }) #ifdef CONFIG_SMP -#error SMP not supported #define smp_mb() mb() #define smp_rmb() rmb() @@ -304,6 +303,8 @@ do { \ #define smp_wmb() barrier() #define smp_read_barrier_depends() do { } while(0) +#endif /* CONFIG_SMP */ + #if defined(CONFIG_CPU_SA1100) || defined(CONFIG_CPU_SA110) /* * On the StrongARM, "swp" is terminally broken since it bypasses the @@ -316,9 +317,16 @@ do { \ * * We choose (1) since its the "easiest" to achieve here and is not * dependent on the processor type. + * + * NOTE that this solution won't work on an SMP system, so explcitly + * forbid it here. */ +#ifdef CONFIG_SMP +#error SMP is not supported on SA1100/SA110 +#else #define swp_is_buggy #endif +#endif static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size) { @@ -361,8 +369,6 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size return ret; } -#endif /* CONFIG_SMP */ - #endif /* __ASSEMBLY__ */ #define arch_align_stack(x) (x) diff --git a/include/asm-arm/tlbflush.h b/include/asm-arm/tlbflush.h index 8a864b118569..9387a5e1ffe0 100644 --- a/include/asm-arm/tlbflush.h +++ b/include/asm-arm/tlbflush.h @@ -235,7 +235,7 @@ extern struct cpu_tlb_fns cpu_tlb; #define tlb_flag(f) ((always_tlb_flags & (f)) || (__tlb_flag & possible_tlb_flags & (f))) -static inline void flush_tlb_all(void) +static inline void local_flush_tlb_all(void) { const int zero = 0; const unsigned int __tlb_flag = __cpu_tlb_flags; @@ -253,7 +253,7 @@ static inline void flush_tlb_all(void) asm("mcr%? p15, 0, %0, c8, c5, 0" : : "r" (zero)); } -static inline void flush_tlb_mm(struct mm_struct *mm) +static inline void local_flush_tlb_mm(struct mm_struct *mm) { const int zero = 0; const int asid = ASID(mm); @@ -282,7 +282,7 @@ static inline void flush_tlb_mm(struct mm_struct *mm) } static inline void -flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr) +local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr) { const int zero = 0; const unsigned int __tlb_flag = __cpu_tlb_flags; @@ -313,7 +313,7 @@ flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr) asm("mcr%? p15, 0, %0, c8, c5, 1" : : "r" (uaddr)); } -static inline void flush_tlb_kernel_page(unsigned long kaddr) +static inline void local_flush_tlb_kernel_page(unsigned long kaddr) { const int zero = 0; const unsigned int __tlb_flag = __cpu_tlb_flags; @@ -384,8 +384,24 @@ static inline void clean_pmd_entry(pmd_t *pmd) /* * Convert calls to our calling convention. */ -#define flush_tlb_range(vma,start,end) __cpu_flush_user_tlb_range(start,end,vma) -#define flush_tlb_kernel_range(s,e) __cpu_flush_kern_tlb_range(s,e) +#define local_flush_tlb_range(vma,start,end) __cpu_flush_user_tlb_range(start,end,vma) +#define local_flush_tlb_kernel_range(s,e) __cpu_flush_kern_tlb_range(s,e) + +#ifndef CONFIG_SMP +#define flush_tlb_all local_flush_tlb_all +#define flush_tlb_mm local_flush_tlb_mm +#define flush_tlb_page local_flush_tlb_page +#define flush_tlb_kernel_page local_flush_tlb_kernel_page +#define flush_tlb_range local_flush_tlb_range +#define flush_tlb_kernel_range local_flush_tlb_kernel_range +#else +extern void flush_tlb_all(void); +extern void flush_tlb_mm(struct mm_struct *mm); +extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr); +extern void flush_tlb_kernel_page(unsigned long kaddr); +extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end); +extern void flush_tlb_kernel_range(unsigned long start, unsigned long end); +#endif /* * if PG_dcache_dirty is set for the page, we need to ensure that any |