diff options
Diffstat (limited to 'arch/parisc/kernel/inventory.c')
| -rw-r--r-- | arch/parisc/kernel/inventory.c | 612 |
1 files changed, 612 insertions, 0 deletions
diff --git a/arch/parisc/kernel/inventory.c b/arch/parisc/kernel/inventory.c new file mode 100644 index 000000000000..1a1c66422736 --- /dev/null +++ b/arch/parisc/kernel/inventory.c @@ -0,0 +1,612 @@ +/* + * inventory.c + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Copyright (c) 1999 The Puffin Group (David Kennedy and Alex deVries) + * Copyright (c) 2001 Matthew Wilcox for Hewlett-Packard + * + * These are the routines to discover what hardware exists in this box. + * This task is complicated by there being 3 different ways of + * performing an inventory, depending largely on the age of the box. + * The recommended way to do this is to check to see whether the machine + * is a `Snake' first, then try System Map, then try PAT. We try System + * Map before checking for a Snake -- this probably doesn't cause any + * problems, but... + */ + +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/mm.h> +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/mmzone.h> +#include <asm/pdc.h> +#include <asm/pdcpat.h> +#include <asm/processor.h> +#include <asm/page.h> +#include <asm/parisc-device.h> + +/* +** Debug options +** DEBUG_PAT Dump details which PDC PAT provides about ranges/devices. +*/ +#undef DEBUG_PAT + +int pdc_type = PDC_TYPE_ILLEGAL; + +void __init setup_pdc(void) +{ + long status; + unsigned int bus_id; + struct pdc_system_map_mod_info module_result; + struct pdc_module_path module_path; + struct pdc_model model; +#ifdef __LP64__ + struct pdc_pat_cell_num cell_info; +#endif + + /* Determine the pdc "type" used on this machine */ + + printk(KERN_INFO "Determining PDC firmware type: "); + + status = pdc_system_map_find_mods(&module_result, &module_path, 0); + if (status == PDC_OK) { + pdc_type = PDC_TYPE_SYSTEM_MAP; + printk("System Map.\n"); + return; + } + + /* + * If the machine doesn't support PDC_SYSTEM_MAP then either it + * is a pdc pat box, or it is an older box. All 64 bit capable + * machines are either pdc pat boxes or they support PDC_SYSTEM_MAP. + */ + + /* + * TODO: We should test for 64 bit capability and give a + * clearer message. + */ + +#ifdef __LP64__ + status = pdc_pat_cell_get_number(&cell_info); + if (status == PDC_OK) { + pdc_type = PDC_TYPE_PAT; + printk("64 bit PAT.\n"); + return; + } +#endif + + /* Check the CPU's bus ID. There's probably a better test. */ + + status = pdc_model_info(&model); + + bus_id = (model.hversion >> (4 + 7)) & 0x1f; + + switch (bus_id) { + case 0x4: /* 720, 730, 750, 735, 755 */ + case 0x6: /* 705, 710 */ + case 0x7: /* 715, 725 */ + case 0x8: /* 745, 747, 742 */ + case 0xA: /* 712 and similiar */ + case 0xC: /* 715/64, at least */ + + pdc_type = PDC_TYPE_SNAKE; + printk("Snake.\n"); + return; + + default: /* Everything else */ + + printk("Unsupported.\n"); + panic("If this is a 64-bit machine, please try a 64-bit kernel.\n"); + } +} + +#define PDC_PAGE_ADJ_SHIFT (PAGE_SHIFT - 12) /* pdc pages are always 4k */ + +static void __init +set_pmem_entry(physmem_range_t *pmem_ptr, unsigned long start, + unsigned long pages4k) +{ + /* Rather than aligning and potentially throwing away + * memory, we'll assume that any ranges are already + * nicely aligned with any reasonable page size, and + * panic if they are not (it's more likely that the + * pdc info is bad in this case). + */ + + if ( ((start & (PAGE_SIZE - 1)) != 0) + || ((pages4k & ((1UL << PDC_PAGE_ADJ_SHIFT) - 1)) != 0) ) { + + panic("Memory range doesn't align with page size!\n"); + } + + pmem_ptr->start_pfn = (start >> PAGE_SHIFT); + pmem_ptr->pages = (pages4k >> PDC_PAGE_ADJ_SHIFT); +} + +static void __init pagezero_memconfig(void) +{ + unsigned long npages; + + /* Use the 32 bit information from page zero to create a single + * entry in the pmem_ranges[] table. + * + * We currently don't support machines with contiguous memory + * >= 4 Gb, who report that memory using 64 bit only fields + * on page zero. It's not worth doing until it can be tested, + * and it is not clear we can support those machines for other + * reasons. + * + * If that support is done in the future, this is where it + * should be done. + */ + + npages = (PAGE_ALIGN(PAGE0->imm_max_mem) >> PAGE_SHIFT); + set_pmem_entry(pmem_ranges,0UL,npages); + npmem_ranges = 1; +} + +#ifdef __LP64__ + +/* All of the PDC PAT specific code is 64-bit only */ + +/* +** The module object is filled via PDC_PAT_CELL[Return Cell Module]. +** If a module is found, register module will get the IODC bytes via +** pdc_iodc_read() using the PA view of conf_base_addr for the hpa parameter. +** +** The IO view can be used by PDC_PAT_CELL[Return Cell Module] +** only for SBAs and LBAs. This view will cause an invalid +** argument error for all other cell module types. +** +*/ + +static int __init +pat_query_module(ulong pcell_loc, ulong mod_index) +{ + pdc_pat_cell_mod_maddr_block_t pa_pdc_cell; + unsigned long bytecnt; + unsigned long temp; /* 64-bit scratch value */ + long status; /* PDC return value status */ + struct parisc_device *dev; + + /* return cell module (PA or Processor view) */ + status = pdc_pat_cell_module(&bytecnt, pcell_loc, mod_index, + PA_VIEW, &pa_pdc_cell); + + if (status != PDC_OK) { + /* no more cell modules or error */ + return status; + } + + temp = pa_pdc_cell.cba; + dev = alloc_pa_dev(PAT_GET_CBA(temp), &pa_pdc_cell.mod_path); + if (!dev) { + return PDC_NE_MOD; + } + + /* alloc_pa_dev sets dev->hpa */ + + /* + ** save parameters in the parisc_device + ** (The idea being the device driver will call pdc_pat_cell_module() + ** and store the results in its own data structure.) + */ + dev->pcell_loc = pcell_loc; + dev->mod_index = mod_index; + + /* save generic info returned from the call */ + /* REVISIT: who is the consumer of this? not sure yet... */ + dev->mod_info = pa_pdc_cell.mod_info; /* pass to PAT_GET_ENTITY() */ + dev->pmod_loc = pa_pdc_cell.mod_location; + + register_parisc_device(dev); /* advertise device */ + +#ifdef DEBUG_PAT + pdc_pat_cell_mod_maddr_block_t io_pdc_cell; + /* dump what we see so far... */ + switch (PAT_GET_ENTITY(dev->mod_info)) { + unsigned long i; + + case PAT_ENTITY_PROC: + printk(KERN_DEBUG "PAT_ENTITY_PROC: id_eid 0x%lx\n", + pa_pdc_cell.mod[0]); + break; + + case PAT_ENTITY_MEM: + printk(KERN_DEBUG + "PAT_ENTITY_MEM: amount 0x%lx min_gni_base 0x%lx min_gni_len 0x%lx\n", + pa_pdc_cell.mod[0], pa_pdc_cell.mod[1], + pa_pdc_cell.mod[2]); + break; + case PAT_ENTITY_CA: + printk(KERN_DEBUG "PAT_ENTITY_CA: %ld\n", pcell_loc); + break; + + case PAT_ENTITY_PBC: + printk(KERN_DEBUG "PAT_ENTITY_PBC: "); + goto print_ranges; + + case PAT_ENTITY_SBA: + printk(KERN_DEBUG "PAT_ENTITY_SBA: "); + goto print_ranges; + + case PAT_ENTITY_LBA: + printk(KERN_DEBUG "PAT_ENTITY_LBA: "); + + print_ranges: + pdc_pat_cell_module(&bytecnt, pcell_loc, mod_index, + IO_VIEW, &io_pdc_cell); + printk(KERN_DEBUG "ranges %ld\n", pa_pdc_cell.mod[1]); + for (i = 0; i < pa_pdc_cell.mod[1]; i++) { + printk(KERN_DEBUG + " PA_VIEW %ld: 0x%016lx 0x%016lx 0x%016lx\n", + i, pa_pdc_cell.mod[2 + i * 3], /* type */ + pa_pdc_cell.mod[3 + i * 3], /* start */ + pa_pdc_cell.mod[4 + i * 3]); /* finish (ie end) */ + printk(KERN_DEBUG + " IO_VIEW %ld: 0x%016lx 0x%016lx 0x%016lx\n", + i, io_pdc_cell.mod[2 + i * 3], /* type */ + io_pdc_cell.mod[3 + i * 3], /* start */ + io_pdc_cell.mod[4 + i * 3]); /* finish (ie end) */ + } + printk(KERN_DEBUG "\n"); + break; + } +#endif /* DEBUG_PAT */ + return PDC_OK; +} + + +/* pat pdc can return information about a variety of different + * types of memory (e.g. firmware,i/o, etc) but we only care about + * the usable physical ram right now. Since the firmware specific + * information is allocated on the stack, we'll be generous, in + * case there is a lot of other information we don't care about. + */ + +#define PAT_MAX_RANGES (4 * MAX_PHYSMEM_RANGES) + +static void __init pat_memconfig(void) +{ + unsigned long actual_len; + struct pdc_pat_pd_addr_map_entry mem_table[PAT_MAX_RANGES+1]; + struct pdc_pat_pd_addr_map_entry *mtbl_ptr; + physmem_range_t *pmem_ptr; + long status; + int entries; + unsigned long length; + int i; + + length = (PAT_MAX_RANGES + 1) * sizeof(struct pdc_pat_pd_addr_map_entry); + + status = pdc_pat_pd_get_addr_map(&actual_len, mem_table, length, 0L); + + if ((status != PDC_OK) + || ((actual_len % sizeof(struct pdc_pat_pd_addr_map_entry)) != 0)) { + + /* The above pdc call shouldn't fail, but, just in + * case, just use the PAGE0 info. + */ + + printk("\n\n\n"); + printk(KERN_WARNING "WARNING! Could not get full memory configuration. " + "All memory may not be used!\n\n\n"); + pagezero_memconfig(); + return; + } + + entries = actual_len / sizeof(struct pdc_pat_pd_addr_map_entry); + + if (entries > PAT_MAX_RANGES) { + printk(KERN_WARNING "This Machine has more memory ranges than we support!\n"); + printk(KERN_WARNING "Some memory may not be used!\n"); + } + + /* Copy information into the firmware independent pmem_ranges + * array, skipping types we don't care about. Notice we said + * "may" above. We'll use all the entries that were returned. + */ + + npmem_ranges = 0; + mtbl_ptr = mem_table; + pmem_ptr = pmem_ranges; /* Global firmware independent table */ + for (i = 0; i < entries; i++,mtbl_ptr++) { + if ( (mtbl_ptr->entry_type != PAT_MEMORY_DESCRIPTOR) + || (mtbl_ptr->memory_type != PAT_MEMTYPE_MEMORY) + || (mtbl_ptr->pages == 0) + || ( (mtbl_ptr->memory_usage != PAT_MEMUSE_GENERAL) + && (mtbl_ptr->memory_usage != PAT_MEMUSE_GI) + && (mtbl_ptr->memory_usage != PAT_MEMUSE_GNI) ) ) { + + continue; + } + + if (npmem_ranges == MAX_PHYSMEM_RANGES) { + printk(KERN_WARNING "This Machine has more memory ranges than we support!\n"); + printk(KERN_WARNING "Some memory will not be used!\n"); + break; + } + + set_pmem_entry(pmem_ptr++,mtbl_ptr->paddr,mtbl_ptr->pages); + npmem_ranges++; + } +} + +static int __init pat_inventory(void) +{ + int status; + ulong mod_index = 0; + struct pdc_pat_cell_num cell_info; + + /* + ** Note: Prelude (and it's successors: Lclass, A400/500) only + ** implement PDC_PAT_CELL sub-options 0 and 2. + */ + status = pdc_pat_cell_get_number(&cell_info); + if (status != PDC_OK) { + return 0; + } + +#ifdef DEBUG_PAT + printk(KERN_DEBUG "CELL_GET_NUMBER: 0x%lx 0x%lx\n", cell_info.cell_num, + cell_info.cell_loc); +#endif + + while (PDC_OK == pat_query_module(cell_info.cell_loc, mod_index)) { + mod_index++; + } + + return mod_index; +} + +/* We only look for extended memory ranges on a 64 bit capable box */ +static void __init sprockets_memconfig(void) +{ + struct pdc_memory_table_raddr r_addr; + struct pdc_memory_table mem_table[MAX_PHYSMEM_RANGES]; + struct pdc_memory_table *mtbl_ptr; + physmem_range_t *pmem_ptr; + long status; + int entries; + int i; + + status = pdc_mem_mem_table(&r_addr,mem_table, + (unsigned long)MAX_PHYSMEM_RANGES); + + if (status != PDC_OK) { + + /* The above pdc call only works on boxes with sprockets + * firmware (newer B,C,J class). Other non PAT PDC machines + * do support more than 3.75 Gb of memory, but we don't + * support them yet. + */ + + pagezero_memconfig(); + return; + } + + if (r_addr.entries_total > MAX_PHYSMEM_RANGES) { + printk(KERN_WARNING "This Machine has more memory ranges than we support!\n"); + printk(KERN_WARNING "Some memory will not be used!\n"); + } + + entries = (int)r_addr.entries_returned; + + npmem_ranges = 0; + mtbl_ptr = mem_table; + pmem_ptr = pmem_ranges; /* Global firmware independent table */ + for (i = 0; i < entries; i++,mtbl_ptr++) { + set_pmem_entry(pmem_ptr++,mtbl_ptr->paddr,mtbl_ptr->pages); + npmem_ranges++; + } +} + +#else /* !__LP64__ */ + +#define pat_inventory() do { } while (0) +#define pat_memconfig() do { } while (0) +#define sprockets_memconfig() pagezero_memconfig() + +#endif /* !__LP64__ */ + + +#ifndef CONFIG_PA20 + +/* Code to support Snake machines (7[2350], 7[235]5, 715/Scorpio) */ + +static struct parisc_device * __init +legacy_create_device(struct pdc_memory_map *r_addr, + struct pdc_module_path *module_path) +{ + struct parisc_device *dev; + int status = pdc_mem_map_hpa(r_addr, module_path); + if (status != PDC_OK) + return NULL; + + dev = alloc_pa_dev(r_addr->hpa, &module_path->path); + if (dev == NULL) + return NULL; + + register_parisc_device(dev); + return dev; +} + +/** + * snake_inventory + * + * Before PDC_SYSTEM_MAP was invented, the PDC_MEM_MAP call was used. + * To use it, we initialise the mod_path.bc to 0xff and try all values of + * mod to get the HPA for the top-level devices. Bus adapters may have + * sub-devices which are discovered by setting bc[5] to 0 and bc[4] to the + * module, then trying all possible functions. + */ +static void __init snake_inventory(void) +{ + int mod; + for (mod = 0; mod < 16; mod++) { + struct parisc_device *dev; + struct pdc_module_path module_path; + struct pdc_memory_map r_addr; + unsigned int func; + + memset(module_path.path.bc, 0xff, 6); + module_path.path.mod = mod; + dev = legacy_create_device(&r_addr, &module_path); + if ((!dev) || (dev->id.hw_type != HPHW_BA)) + continue; + + memset(module_path.path.bc, 0xff, 4); + module_path.path.bc[4] = mod; + + for (func = 0; func < 16; func++) { + module_path.path.bc[5] = 0; + module_path.path.mod = func; + legacy_create_device(&r_addr, &module_path); + } + } +} + +#else /* CONFIG_PA20 */ +#define snake_inventory() do { } while (0) +#endif /* CONFIG_PA20 */ + +/* Common 32/64 bit based code goes here */ + +/** + * add_system_map_addresses - Add additional addresses to the parisc device. + * @dev: The parisc device. + * @num_addrs: Then number of addresses to add; + * @module_instance: The system_map module instance. + * + * This function adds any additional addresses reported by the system_map + * firmware to the parisc device. + */ +static void __init +add_system_map_addresses(struct parisc_device *dev, int num_addrs, + int module_instance) +{ + int i; + long status; + struct pdc_system_map_addr_info addr_result; + + dev->addr = kmalloc(num_addrs * sizeof(unsigned long), GFP_KERNEL); + if(!dev->addr) { + printk(KERN_ERR "%s %s(): memory allocation failure\n", + __FILE__, __FUNCTION__); + return; + } + + for(i = 1; i <= num_addrs; ++i) { + status = pdc_system_map_find_addrs(&addr_result, + module_instance, i); + if(PDC_OK == status) { + dev->addr[dev->num_addrs] = (unsigned long)addr_result.mod_addr; + dev->num_addrs++; + } else { + printk(KERN_WARNING + "Bad PDC_FIND_ADDRESS status return (%ld) for index %d\n", + status, i); + } + } +} + +/** + * system_map_inventory - Retrieve firmware devices via SYSTEM_MAP. + * + * This function attempts to retrieve and register all the devices firmware + * knows about via the SYSTEM_MAP PDC call. + */ +static void __init system_map_inventory(void) +{ + int i; + long status = PDC_OK; + + for (i = 0; i < 256; i++) { + struct parisc_device *dev; + struct pdc_system_map_mod_info module_result; + struct pdc_module_path module_path; + + status = pdc_system_map_find_mods(&module_result, + &module_path, i); + if ((status == PDC_BAD_PROC) || (status == PDC_NE_MOD)) + break; + if (status != PDC_OK) + continue; + + dev = alloc_pa_dev(module_result.mod_addr, &module_path.path); + if (!dev) + continue; + + register_parisc_device(dev); + + /* if available, get the additional addresses for a module */ + if (!module_result.add_addrs) + continue; + + add_system_map_addresses(dev, module_result.add_addrs, i); + } + + walk_central_bus(); + return; +} + +void __init do_memory_inventory(void) +{ + switch (pdc_type) { + + case PDC_TYPE_PAT: + pat_memconfig(); + break; + + case PDC_TYPE_SYSTEM_MAP: + sprockets_memconfig(); + break; + + case PDC_TYPE_SNAKE: + pagezero_memconfig(); + return; + + default: + panic("Unknown PDC type!\n"); + } + + if (npmem_ranges == 0 || pmem_ranges[0].start_pfn != 0) { + printk(KERN_WARNING "Bad memory configuration returned!\n"); + printk(KERN_WARNING "Some memory may not be used!\n"); + pagezero_memconfig(); + } +} + +void __init do_device_inventory(void) +{ + printk(KERN_INFO "Searching for devices...\n"); + + init_parisc_bus(); + + switch (pdc_type) { + + case PDC_TYPE_PAT: + pat_inventory(); + break; + + case PDC_TYPE_SYSTEM_MAP: + system_map_inventory(); + break; + + case PDC_TYPE_SNAKE: + snake_inventory(); + break; + + default: + panic("Unknown PDC type!\n"); + } + printk(KERN_INFO "Found devices:\n"); + print_parisc_devices(); +} |