diff options
Diffstat (limited to 'arch/ppc/platforms/chestnut.h')
-rw-r--r-- | arch/ppc/platforms/chestnut.h | 127 |
1 files changed, 0 insertions, 127 deletions
diff --git a/arch/ppc/platforms/chestnut.h b/arch/ppc/platforms/chestnut.h deleted file mode 100644 index e00fd9f8bbd0..000000000000 --- a/arch/ppc/platforms/chestnut.h +++ /dev/null @@ -1,127 +0,0 @@ -/* - * Definitions for IBM 750FXGX Eval (Chestnut) - * - * Author: <source@mvista.com> - * - * Based on Artesyn Katana code done by Tim Montgomery <timm@artesyncp.com> - * Based on code done by Rabeeh Khoury - rabeeh@galileo.co.il - * Based on code done by Mark A. Greer <mgreer@mvista.com> - * - * <2004> (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -/* - * This is the CPU physical memory map (windows must be at least 1MB and start - * on a boundary that is a multiple of the window size): - * - * Seems on the IBM 750FXGX Eval board, the MV64460 Registers can be in - * only 2 places per switch U17 0x14000000 or 0xf1000000 easily - chose to - * implement at 0xf1000000 only at this time - * - * 0xfff00000-0xffffffff - 8 Flash - * 0xffe00000-0xffefffff - BOOT SRAM - * 0xffd00000-0xffd00004 - CPLD - * 0xffc00000-0xffc0000f - UART - * 0xffb00000-0xffb07fff - FRAM - * 0xff840000-0xffafffff - *** HOLE *** - * 0xff800000-0xff83ffff - MV64460 Integrated SRAM - * 0xfe000000-0xff8fffff - *** HOLE *** - * 0xfc000000-0xfdffffff - 32bit Flash - * 0xf1010000-0xfbffffff - *** HOLE *** - * 0xf1000000-0xf100ffff - MV64460 Registers - */ - -#ifndef __PPC_PLATFORMS_CHESTNUT_H__ -#define __PPC_PLATFORMS_CHESTNUT_H__ - -#define CHESTNUT_BOOT_8BIT_BASE 0xfff00000 -#define CHESTNUT_BOOT_8BIT_SIZE_ACTUAL (1024*1024) -#define CHESTNUT_BOOT_SRAM_BASE 0xffe00000 -#define CHESTNUT_BOOT_SRAM_SIZE_ACTUAL (1024*1024) -#define CHESTNUT_CPLD_BASE 0xffd00000 -#define CHESTNUT_CPLD_SIZE_ACTUAL 5 -#define CHESTNUT_CPLD_REG3 (CHESTNUT_CPLD_BASE+3) -#define CHESTNUT_UART_BASE 0xffc00000 -#define CHESTNUT_UART_SIZE_ACTUAL 16 -#define CHESTNUT_FRAM_BASE 0xffb00000 -#define CHESTNUT_FRAM_SIZE_ACTUAL (32*1024) -#define CHESTNUT_INTERNAL_SRAM_BASE 0xff800000 -#define CHESTNUT_32BIT_BASE 0xfc000000 -#define CHESTNUT_32BIT_SIZE (32*1024*1024) - -#define CHESTNUT_BOOT_8BIT_SIZE max(MV64360_WINDOW_SIZE_MIN, \ - CHESTNUT_BOOT_8BIT_SIZE_ACTUAL) -#define CHESTNUT_BOOT_SRAM_SIZE max(MV64360_WINDOW_SIZE_MIN, \ - CHESTNUT_BOOT_SRAM_SIZE_ACTUAL) -#define CHESTNUT_CPLD_SIZE max(MV64360_WINDOW_SIZE_MIN, \ - CHESTNUT_CPLD_SIZE_ACTUAL) -#define CHESTNUT_UART_SIZE max(MV64360_WINDOW_SIZE_MIN, \ - CHESTNUT_UART_SIZE_ACTUAL) -#define CHESTNUT_FRAM_SIZE max(MV64360_WINDOW_SIZE_MIN, \ - CHESTNUT_FRAM_SIZE_ACTUAL) - -#define CHESTNUT_BUS_SPEED 200000000 -#define CHESTNUT_PIBS_DATABASE 0xf0000 /* from PIBS src code */ - -#define KATANA_ETH0_PHY_ADDR 12 -#define KATANA_ETH1_PHY_ADDR 11 -#define KATANA_ETH2_PHY_ADDR 4 - -#define CHESTNUT_ETH_TX_QUEUE_SIZE 800 -#define CHESTNUT_ETH_RX_QUEUE_SIZE 400 - -/* - * PCI windows - */ - -#define CHESTNUT_PCI0_MEM_PROC_ADDR 0x80000000 -#define CHESTNUT_PCI0_MEM_PCI_HI_ADDR 0x00000000 -#define CHESTNUT_PCI0_MEM_PCI_LO_ADDR 0x80000000 -#define CHESTNUT_PCI0_MEM_SIZE 0x10000000 -#define CHESTNUT_PCI0_IO_PROC_ADDR 0xa0000000 -#define CHESTNUT_PCI0_IO_PCI_ADDR 0x00000000 -#define CHESTNUT_PCI0_IO_SIZE 0x01000000 - -/* - * Board-specific IRQ info - */ -#define CHESTNUT_PCI_SLOT0_IRQ (64 + 31) -#define CHESTNUT_PCI_SLOT1_IRQ (64 + 30) -#define CHESTNUT_PCI_SLOT2_IRQ (64 + 29) -#define CHESTNUT_PCI_SLOT3_IRQ (64 + 28) - -/* serial port definitions */ -#define CHESTNUT_UART0_IO_BASE (CHESTNUT_UART_BASE + 8) -#define CHESTNUT_UART1_IO_BASE CHESTNUT_UART_BASE - -#define UART0_INT (64 + 25) -#define UART1_INT (64 + 26) - -#ifdef CONFIG_SERIAL_MANY_PORTS -#define RS_TABLE_SIZE 64 -#else -#define RS_TABLE_SIZE 2 -#endif - -/* Rate for the 3.6864 Mhz clock for the onboard serial chip */ -#define BASE_BAUD (3686400 / 16) - -#ifdef CONFIG_SERIAL_DETECT_IRQ -#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST|ASYNC_AUTO_IRQ) -#else -#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST) -#endif - -#define STD_UART_OP(num) \ - { 0, BASE_BAUD, 0, UART##num##_INT, STD_COM_FLAGS, \ - iomem_base: (u8 *)CHESTNUT_UART##num##_IO_BASE, \ - io_type: SERIAL_IO_MEM}, - -#define SERIAL_PORT_DFNS \ - STD_UART_OP(0) \ - STD_UART_OP(1) - -#endif /* __PPC_PLATFORMS_CHESTNUT_H__ */ |