diff options
Diffstat (limited to 'include/asm-ppc/pgtable.h')
| -rw-r--r-- | include/asm-ppc/pgtable.h | 771 |
1 files changed, 0 insertions, 771 deletions
diff --git a/include/asm-ppc/pgtable.h b/include/asm-ppc/pgtable.h deleted file mode 100644 index 55f9d38e3bf8..000000000000 --- a/include/asm-ppc/pgtable.h +++ /dev/null @@ -1,771 +0,0 @@ -#ifdef __KERNEL__ -#ifndef _PPC_PGTABLE_H -#define _PPC_PGTABLE_H - -#include <asm-generic/4level-fixup.h> - - -#ifndef __ASSEMBLY__ -#include <linux/sched.h> -#include <linux/threads.h> -#include <asm/processor.h> /* For TASK_SIZE */ -#include <asm/mmu.h> -#include <asm/page.h> -#include <asm/io.h> /* For sub-arch specific PPC_PIN_SIZE */ -struct mm_struct; - -extern unsigned long va_to_phys(unsigned long address); -extern pte_t *va_to_pte(unsigned long address); -extern unsigned long ioremap_bot, ioremap_base; -#endif /* __ASSEMBLY__ */ - -/* - * The PowerPC MMU uses a hash table containing PTEs, together with - * a set of 16 segment registers (on 32-bit implementations), to define - * the virtual to physical address mapping. - * - * We use the hash table as an extended TLB, i.e. a cache of currently - * active mappings. We maintain a two-level page table tree, much - * like that used by the i386, for the sake of the Linux memory - * management code. Low-level assembler code in hashtable.S - * (procedure hash_page) is responsible for extracting ptes from the - * tree and putting them into the hash table when necessary, and - * updating the accessed and modified bits in the page table tree. - */ - -/* - * The PowerPC MPC8xx uses a TLB with hardware assisted, software tablewalk. - * We also use the two level tables, but we can put the real bits in them - * needed for the TLB and tablewalk. These definitions require Mx_CTR.PPM = 0, - * Mx_CTR.PPCS = 0, and MD_CTR.TWAM = 1. The level 2 descriptor has - * additional page protection (when Mx_CTR.PPCS = 1) that allows TLB hit - * based upon user/super access. The TLB does not have accessed nor write - * protect. We assume that if the TLB get loaded with an entry it is - * accessed, and overload the changed bit for write protect. We use - * two bits in the software pte that are supposed to be set to zero in - * the TLB entry (24 and 25) for these indicators. Although the level 1 - * descriptor contains the guarded and writethrough/copyback bits, we can - * set these at the page level since they get copied from the Mx_TWC - * register when the TLB entry is loaded. We will use bit 27 for guard, since - * that is where it exists in the MD_TWC, and bit 26 for writethrough. - * These will get masked from the level 2 descriptor at TLB load time, and - * copied to the MD_TWC before it gets loaded. - * Large page sizes added. We currently support two sizes, 4K and 8M. - * This also allows a TLB hander optimization because we can directly - * load the PMD into MD_TWC. The 8M pages are only used for kernel - * mapping of well known areas. The PMD (PGD) entries contain control - * flags in addition to the address, so care must be taken that the - * software no longer assumes these are only pointers. - */ - -/* - * At present, all PowerPC 400-class processors share a similar TLB - * architecture. The instruction and data sides share a unified, - * 64-entry, fully-associative TLB which is maintained totally under - * software control. In addition, the instruction side has a - * hardware-managed, 4-entry, fully-associative TLB which serves as a - * first level to the shared TLB. These two TLBs are known as the UTLB - * and ITLB, respectively (see "mmu.h" for definitions). - */ - -/* - * The normal case is that PTEs are 32-bits and we have a 1-page - * 1024-entry pgdir pointing to 1-page 1024-entry PTE pages. -- paulus - * - * For any >32-bit physical address platform, we can use the following - * two level page table layout where the pgdir is 8KB and the MS 13 bits - * are an index to the second level table. The combined pgdir/pmd first - * level has 2048 entries and the second level has 512 64-bit PTE entries. - * -Matt - */ -/* PMD_SHIFT determines the size of the area mapped by the PTE pages */ -#define PMD_SHIFT (PAGE_SHIFT + PTE_SHIFT) -#define PMD_SIZE (1UL << PMD_SHIFT) -#define PMD_MASK (~(PMD_SIZE-1)) - -/* PGDIR_SHIFT determines what a top-level page table entry can map */ -#define PGDIR_SHIFT PMD_SHIFT -#define PGDIR_SIZE (1UL << PGDIR_SHIFT) -#define PGDIR_MASK (~(PGDIR_SIZE-1)) - -/* - * entries per page directory level: our page-table tree is two-level, so - * we don't really have any PMD directory. - */ -#define PTRS_PER_PTE (1 << PTE_SHIFT) -#define PTRS_PER_PMD 1 -#define PTRS_PER_PGD (1 << (32 - PGDIR_SHIFT)) - -#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE) -#define FIRST_USER_ADDRESS 0 - -#define USER_PGD_PTRS (PAGE_OFFSET >> PGDIR_SHIFT) -#define KERNEL_PGD_PTRS (PTRS_PER_PGD-USER_PGD_PTRS) - -#define pte_ERROR(e) \ - printk("%s:%d: bad pte "PTE_FMT".\n", __FILE__, __LINE__, pte_val(e)) -#define pmd_ERROR(e) \ - printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e)) -#define pgd_ERROR(e) \ - printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) - -/* - * Just any arbitrary offset to the start of the vmalloc VM area: the - * current 64MB value just means that there will be a 64MB "hole" after the - * physical memory until the kernel virtual memory starts. That means that - * any out-of-bounds memory accesses will hopefully be caught. - * The vmalloc() routines leaves a hole of 4kB between each vmalloced - * area for the same reason. ;) - * - * We no longer map larger than phys RAM with the BATs so we don't have - * to worry about the VMALLOC_OFFSET causing problems. We do have to worry - * about clashes between our early calls to ioremap() that start growing down - * from ioremap_base being run into the VM area allocations (growing upwards - * from VMALLOC_START). For this reason we have ioremap_bot to check when - * we actually run into our mappings setup in the early boot with the VM - * system. This really does become a problem for machines with good amounts - * of RAM. -- Cort - */ -#define VMALLOC_OFFSET (0x1000000) /* 16M */ -#ifdef PPC_PIN_SIZE -#define VMALLOC_START (((_ALIGN((long)high_memory, PPC_PIN_SIZE) + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))) -#else -#define VMALLOC_START ((((long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))) -#endif -#define VMALLOC_END ioremap_bot - -/* - * Bits in a linux-style PTE. These match the bits in the - * (hardware-defined) PowerPC PTE as closely as possible. - */ - -#if defined(CONFIG_40x) - -/* There are several potential gotchas here. The 40x hardware TLBLO - field looks like this: - - 0 1 2 3 4 ... 18 19 20 21 22 23 24 25 26 27 28 29 30 31 - RPN..................... 0 0 EX WR ZSEL....... W I M G - - Where possible we make the Linux PTE bits match up with this - - - bits 20 and 21 must be cleared, because we use 4k pages (40x can - support down to 1k pages), this is done in the TLBMiss exception - handler. - - We use only zones 0 (for kernel pages) and 1 (for user pages) - of the 16 available. Bit 24-26 of the TLB are cleared in the TLB - miss handler. Bit 27 is PAGE_USER, thus selecting the correct - zone. - - PRESENT *must* be in the bottom two bits because swap cache - entries use the top 30 bits. Because 40x doesn't support SMP - anyway, M is irrelevant so we borrow it for PAGE_PRESENT. Bit 30 - is cleared in the TLB miss handler before the TLB entry is loaded. - - All other bits of the PTE are loaded into TLBLO without - modification, leaving us only the bits 20, 21, 24, 25, 26, 30 for - software PTE bits. We actually use use bits 21, 24, 25, and - 30 respectively for the software bits: ACCESSED, DIRTY, RW, and - PRESENT. -*/ - -/* Definitions for 40x embedded chips. */ -#define _PAGE_GUARDED 0x001 /* G: page is guarded from prefetch */ -#define _PAGE_FILE 0x001 /* when !present: nonlinear file mapping */ -#define _PAGE_PRESENT 0x002 /* software: PTE contains a translation */ -#define _PAGE_NO_CACHE 0x004 /* I: caching is inhibited */ -#define _PAGE_WRITETHRU 0x008 /* W: caching is write-through */ -#define _PAGE_USER 0x010 /* matches one of the zone permission bits */ -#define _PAGE_RW 0x040 /* software: Writes permitted */ -#define _PAGE_DIRTY 0x080 /* software: dirty page */ -#define _PAGE_HWWRITE 0x100 /* hardware: Dirty & RW, set in exception */ -#define _PAGE_HWEXEC 0x200 /* hardware: EX permission */ -#define _PAGE_ACCESSED 0x400 /* software: R: page referenced */ - -#define _PMD_PRESENT 0x400 /* PMD points to page of PTEs */ -#define _PMD_BAD 0x802 -#define _PMD_SIZE 0x0e0 /* size field, != 0 for large-page PMD entry */ -#define _PMD_SIZE_4M 0x0c0 -#define _PMD_SIZE_16M 0x0e0 -#define PMD_PAGE_SIZE(pmdval) (1024 << (((pmdval) & _PMD_SIZE) >> 4)) - -#elif defined(CONFIG_44x) -/* - * Definitions for PPC440 - * - * Because of the 3 word TLB entries to support 36-bit addressing, - * the attribute are difficult to map in such a fashion that they - * are easily loaded during exception processing. I decided to - * organize the entry so the ERPN is the only portion in the - * upper word of the PTE and the attribute bits below are packed - * in as sensibly as they can be in the area below a 4KB page size - * oriented RPN. This at least makes it easy to load the RPN and - * ERPN fields in the TLB. -Matt - * - * Note that these bits preclude future use of a page size - * less than 4KB. - * - * - * PPC 440 core has following TLB attribute fields; - * - * TLB1: - * 0 1 2 3 4 ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 - * RPN................................. - - - - - - ERPN....... - * - * TLB2: - * 0 1 2 3 4 ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 - * - - - - - - U0 U1 U2 U3 W I M G E - UX UW UR SX SW SR - * - * There are some constrains and options, to decide mapping software bits - * into TLB entry. - * - * - PRESENT *must* be in the bottom three bits because swap cache - * entries use the top 29 bits for TLB2. - * - * - FILE *must* be in the bottom three bits because swap cache - * entries use the top 29 bits for TLB2. - * - * - CACHE COHERENT bit (M) has no effect on PPC440 core, because it - * doesn't support SMP. So we can use this as software bit, like - * DIRTY. - * - * With the PPC 44x Linux implementation, the 0-11th LSBs of the PTE are used - * for memory protection related functions (see PTE structure in - * include/asm-ppc/mmu.h). The _PAGE_XXX definitions in this file map to the - * above bits. Note that the bit values are CPU specific, not architecture - * specific. - * - * The kernel PTE entry holds an arch-dependent swp_entry structure under - * certain situations. In other words, in such situations some portion of - * the PTE bits are used as a swp_entry. In the PPC implementation, the - * 3-24th LSB are shared with swp_entry, however the 0-2nd three LSB still - * hold protection values. That means the three protection bits are - * reserved for both PTE and SWAP entry at the most significant three - * LSBs. - * - * There are three protection bits available for SWAP entry: - * _PAGE_PRESENT - * _PAGE_FILE - * _PAGE_HASHPTE (if HW has) - * - * So those three bits have to be inside of 0-2nd LSB of PTE. - * - */ - -#define _PAGE_PRESENT 0x00000001 /* S: PTE valid */ -#define _PAGE_RW 0x00000002 /* S: Write permission */ -#define _PAGE_FILE 0x00000004 /* S: nonlinear file mapping */ -#define _PAGE_ACCESSED 0x00000008 /* S: Page referenced */ -#define _PAGE_HWWRITE 0x00000010 /* H: Dirty & RW */ -#define _PAGE_HWEXEC 0x00000020 /* H: Execute permission */ -#define _PAGE_USER 0x00000040 /* S: User page */ -#define _PAGE_ENDIAN 0x00000080 /* H: E bit */ -#define _PAGE_GUARDED 0x00000100 /* H: G bit */ -#define _PAGE_DIRTY 0x00000200 /* S: Page dirty */ -#define _PAGE_NO_CACHE 0x00000400 /* H: I bit */ -#define _PAGE_WRITETHRU 0x00000800 /* H: W bit */ - -/* TODO: Add large page lowmem mapping support */ -#define _PMD_PRESENT 0 -#define _PMD_PRESENT_MASK (PAGE_MASK) -#define _PMD_BAD (~PAGE_MASK) - -/* ERPN in a PTE never gets cleared, ignore it */ -#define _PTE_NONE_MASK 0xffffffff00000000ULL - -#elif defined(CONFIG_8xx) -/* Definitions for 8xx embedded chips. */ -#define _PAGE_PRESENT 0x0001 /* Page is valid */ -#define _PAGE_FILE 0x0002 /* when !present: nonlinear file mapping */ -#define _PAGE_NO_CACHE 0x0002 /* I: cache inhibit */ -#define _PAGE_SHARED 0x0004 /* No ASID (context) compare */ - -/* These five software bits must be masked out when the entry is loaded - * into the TLB. - */ -#define _PAGE_EXEC 0x0008 /* software: i-cache coherency required */ -#define _PAGE_GUARDED 0x0010 /* software: guarded access */ -#define _PAGE_DIRTY 0x0020 /* software: page changed */ -#define _PAGE_RW 0x0040 /* software: user write access allowed */ -#define _PAGE_ACCESSED 0x0080 /* software: page referenced */ - -/* Setting any bits in the nibble with the follow two controls will - * require a TLB exception handler change. It is assumed unused bits - * are always zero. - */ -#define _PAGE_HWWRITE 0x0100 /* h/w write enable: never set in Linux PTE */ -#define _PAGE_USER 0x0800 /* One of the PP bits, the other is USER&~RW */ - -#define _PMD_PRESENT 0x0001 -#define _PMD_BAD 0x0ff0 -#define _PMD_PAGE_MASK 0x000c -#define _PMD_PAGE_8M 0x000c - -#define _PTE_NONE_MASK _PAGE_ACCESSED - -#else /* CONFIG_6xx */ -/* Definitions for 60x, 740/750, etc. */ -#define _PAGE_PRESENT 0x001 /* software: pte contains a translation */ -#define _PAGE_HASHPTE 0x002 /* hash_page has made an HPTE for this pte */ -#define _PAGE_FILE 0x004 /* when !present: nonlinear file mapping */ -#define _PAGE_USER 0x004 /* usermode access allowed */ -#define _PAGE_GUARDED 0x008 /* G: prohibit speculative access */ -#define _PAGE_COHERENT 0x010 /* M: enforce memory coherence (SMP systems) */ -#define _PAGE_NO_CACHE 0x020 /* I: cache inhibit */ -#define _PAGE_WRITETHRU 0x040 /* W: cache write-through */ -#define _PAGE_DIRTY 0x080 /* C: page changed */ -#define _PAGE_ACCESSED 0x100 /* R: page referenced */ -#define _PAGE_EXEC 0x200 /* software: i-cache coherency required */ -#define _PAGE_RW 0x400 /* software: user write access allowed */ - -#define _PTE_NONE_MASK _PAGE_HASHPTE - -#define _PMD_PRESENT 0 -#define _PMD_PRESENT_MASK (PAGE_MASK) -#define _PMD_BAD (~PAGE_MASK) -#endif - -/* - * Some bits are only used on some cpu families... - */ -#ifndef _PAGE_HASHPTE -#define _PAGE_HASHPTE 0 -#endif -#ifndef _PTE_NONE_MASK -#define _PTE_NONE_MASK 0 -#endif -#ifndef _PAGE_SHARED -#define _PAGE_SHARED 0 -#endif -#ifndef _PAGE_HWWRITE -#define _PAGE_HWWRITE 0 -#endif -#ifndef _PAGE_HWEXEC -#define _PAGE_HWEXEC 0 -#endif -#ifndef _PAGE_EXEC -#define _PAGE_EXEC 0 -#endif -#ifndef _PMD_PRESENT_MASK -#define _PMD_PRESENT_MASK _PMD_PRESENT -#endif -#ifndef _PMD_SIZE -#define _PMD_SIZE 0 -#define PMD_PAGE_SIZE(pmd) bad_call_to_PMD_PAGE_SIZE() -#endif - -#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY) - -/* - * Note: the _PAGE_COHERENT bit automatically gets set in the hardware - * PTE if CONFIG_SMP is defined (hash_page does this); there is no need - * to have it in the Linux PTE, and in fact the bit could be reused for - * another purpose. -- paulus. - */ - -#ifdef CONFIG_44x -#define _PAGE_BASE (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_GUARDED) -#else -#define _PAGE_BASE (_PAGE_PRESENT | _PAGE_ACCESSED) -#endif -#define _PAGE_WRENABLE (_PAGE_RW | _PAGE_DIRTY | _PAGE_HWWRITE) -#define _PAGE_KERNEL (_PAGE_BASE | _PAGE_SHARED | _PAGE_WRENABLE) - -#ifdef CONFIG_PPC_STD_MMU -/* On standard PPC MMU, no user access implies kernel read/write access, - * so to write-protect kernel memory we must turn on user access */ -#define _PAGE_KERNEL_RO (_PAGE_BASE | _PAGE_SHARED | _PAGE_USER) -#else -#define _PAGE_KERNEL_RO (_PAGE_BASE | _PAGE_SHARED) -#endif - -#define _PAGE_IO (_PAGE_KERNEL | _PAGE_NO_CACHE | _PAGE_GUARDED) -#define _PAGE_RAM (_PAGE_KERNEL | _PAGE_HWEXEC) - -#if defined(CONFIG_KGDB) || defined(CONFIG_XMON) || defined(CONFIG_BDI_SWITCH) -/* We want the debuggers to be able to set breakpoints anywhere, so - * don't write protect the kernel text */ -#define _PAGE_RAM_TEXT _PAGE_RAM -#else -#define _PAGE_RAM_TEXT (_PAGE_KERNEL_RO | _PAGE_HWEXEC) -#endif - -#define PAGE_NONE __pgprot(_PAGE_BASE) -#define PAGE_READONLY __pgprot(_PAGE_BASE | _PAGE_USER) -#define PAGE_READONLY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC) -#define PAGE_SHARED __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW) -#define PAGE_SHARED_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW | _PAGE_EXEC) -#define PAGE_COPY __pgprot(_PAGE_BASE | _PAGE_USER) -#define PAGE_COPY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC) - -#define PAGE_KERNEL __pgprot(_PAGE_RAM) -#define PAGE_KERNEL_NOCACHE __pgprot(_PAGE_IO) - -/* - * The PowerPC can only do execute protection on a segment (256MB) basis, - * not on a page basis. So we consider execute permission the same as read. - * Also, write permissions imply read permissions. - * This is the closest we can get.. - */ -#define __P000 PAGE_NONE -#define __P001 PAGE_READONLY_X -#define __P010 PAGE_COPY -#define __P011 PAGE_COPY_X -#define __P100 PAGE_READONLY -#define __P101 PAGE_READONLY_X -#define __P110 PAGE_COPY -#define __P111 PAGE_COPY_X - -#define __S000 PAGE_NONE -#define __S001 PAGE_READONLY_X -#define __S010 PAGE_SHARED -#define __S011 PAGE_SHARED_X -#define __S100 PAGE_READONLY -#define __S101 PAGE_READONLY_X -#define __S110 PAGE_SHARED -#define __S111 PAGE_SHARED_X - -#ifndef __ASSEMBLY__ -/* Make sure we get a link error if PMD_PAGE_SIZE is ever called on a - * kernel without large page PMD support */ -extern unsigned long bad_call_to_PMD_PAGE_SIZE(void); - -/* - * Conversions between PTE values and page frame numbers. - */ - -/* in some case we want to additionaly adjust where the pfn is in the pte to - * allow room for more flags */ -#define PFN_SHIFT_OFFSET (PAGE_SHIFT) - -#define pte_pfn(x) (pte_val(x) >> PFN_SHIFT_OFFSET) -#define pte_page(x) pfn_to_page(pte_pfn(x)) - -#define pfn_pte(pfn, prot) __pte(((pte_basic_t)(pfn) << PFN_SHIFT_OFFSET) |\ - pgprot_val(prot)) -#define mk_pte(page, prot) pfn_pte(page_to_pfn(page), prot) - -/* - * ZERO_PAGE is a global shared page that is always zero: used - * for zero-mapped memory areas etc.. - */ -extern unsigned long empty_zero_page[1024]; -#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page)) - -#endif /* __ASSEMBLY__ */ - -#define pte_none(pte) ((pte_val(pte) & ~_PTE_NONE_MASK) == 0) -#define pte_present(pte) (pte_val(pte) & _PAGE_PRESENT) -#define pte_clear(mm,addr,ptep) do { set_pte_at((mm), (addr), (ptep), __pte(0)); } while (0) - -#define pmd_none(pmd) (!pmd_val(pmd)) -#define pmd_bad(pmd) (pmd_val(pmd) & _PMD_BAD) -#define pmd_present(pmd) (pmd_val(pmd) & _PMD_PRESENT_MASK) -#define pmd_clear(pmdp) do { pmd_val(*(pmdp)) = 0; } while (0) - -#ifndef __ASSEMBLY__ -/* - * The "pgd_xxx()" functions here are trivial for a folded two-level - * setup: the pgd is never bad, and a pmd always exists (as it's folded - * into the pgd entry) - */ -static inline int pgd_none(pgd_t pgd) { return 0; } -static inline int pgd_bad(pgd_t pgd) { return 0; } -static inline int pgd_present(pgd_t pgd) { return 1; } -#define pgd_clear(xp) do { } while (0) - -#define pgd_page_vaddr(pgd) \ - ((unsigned long) __va(pgd_val(pgd) & PAGE_MASK)) - -/* - * The following only work if pte_present() is true. - * Undefined behaviour if not.. - */ -static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_RW; } -static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; } -static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; } -static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; } -static inline int pte_special(pte_t pte) { return 0; } - -static inline void pte_uncache(pte_t pte) { pte_val(pte) |= _PAGE_NO_CACHE; } -static inline void pte_cache(pte_t pte) { pte_val(pte) &= ~_PAGE_NO_CACHE; } - -static inline pte_t pte_wrprotect(pte_t pte) { - pte_val(pte) &= ~(_PAGE_RW | _PAGE_HWWRITE); return pte; } -static inline pte_t pte_mkclean(pte_t pte) { - pte_val(pte) &= ~(_PAGE_DIRTY | _PAGE_HWWRITE); return pte; } -static inline pte_t pte_mkold(pte_t pte) { - pte_val(pte) &= ~_PAGE_ACCESSED; return pte; } - -static inline pte_t pte_mkwrite(pte_t pte) { - pte_val(pte) |= _PAGE_RW; return pte; } -static inline pte_t pte_mkdirty(pte_t pte) { - pte_val(pte) |= _PAGE_DIRTY; return pte; } -static inline pte_t pte_mkyoung(pte_t pte) { - pte_val(pte) |= _PAGE_ACCESSED; return pte; } -static inline pte_t pte_mkspecial(pte_t pte) { - return pte; } - -static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) -{ - pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot); - return pte; -} - -/* - * When flushing the tlb entry for a page, we also need to flush the hash - * table entry. flush_hash_pages is assembler (for speed) in hashtable.S. - */ -extern int flush_hash_pages(unsigned context, unsigned long va, - unsigned long pmdval, int count); - -/* Add an HPTE to the hash table */ -extern void add_hash_page(unsigned context, unsigned long va, - unsigned long pmdval); - -/* - * Atomic PTE updates. - * - * pte_update clears and sets bit atomically, and returns - * the old pte value. In the 64-bit PTE case we lock around the - * low PTE word since we expect ALL flag bits to be there - */ -#ifndef CONFIG_PTE_64BIT -static inline unsigned long pte_update(pte_t *p, unsigned long clr, - unsigned long set) -{ - unsigned long old, tmp; - - __asm__ __volatile__("\ -1: lwarx %0,0,%3\n\ - andc %1,%0,%4\n\ - or %1,%1,%5\n" - PPC405_ERR77(0,%3) -" stwcx. %1,0,%3\n\ - bne- 1b" - : "=&r" (old), "=&r" (tmp), "=m" (*p) - : "r" (p), "r" (clr), "r" (set), "m" (*p) - : "cc" ); - return old; -} -#else -static inline unsigned long long pte_update(pte_t *p, unsigned long clr, - unsigned long set) -{ - unsigned long long old; - unsigned long tmp; - - __asm__ __volatile__("\ -1: lwarx %L0,0,%4\n\ - lwzx %0,0,%3\n\ - andc %1,%L0,%5\n\ - or %1,%1,%6\n" - PPC405_ERR77(0,%3) -" stwcx. %1,0,%4\n\ - bne- 1b" - : "=&r" (old), "=&r" (tmp), "=m" (*p) - : "r" (p), "r" ((unsigned long)(p) + 4), "r" (clr), "r" (set), "m" (*p) - : "cc" ); - return old; -} -#endif - -/* - * set_pte stores a linux PTE into the linux page table. - * On machines which use an MMU hash table we avoid changing the - * _PAGE_HASHPTE bit. - */ -static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, - pte_t *ptep, pte_t pte) -{ -#if _PAGE_HASHPTE != 0 - pte_update(ptep, ~_PAGE_HASHPTE, pte_val(pte) & ~_PAGE_HASHPTE); -#else - *ptep = pte; -#endif -} - -/* - * 2.6 calles this without flushing the TLB entry, this is wrong - * for our hash-based implementation, we fix that up here - */ -#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG -static inline int __ptep_test_and_clear_young(unsigned int context, unsigned long addr, pte_t *ptep) -{ - unsigned long old; - old = pte_update(ptep, _PAGE_ACCESSED, 0); -#if _PAGE_HASHPTE != 0 - if (old & _PAGE_HASHPTE) { - unsigned long ptephys = __pa(ptep) & PAGE_MASK; - flush_hash_pages(context, addr, ptephys, 1); - } -#endif - return (old & _PAGE_ACCESSED) != 0; -} -#define ptep_test_and_clear_young(__vma, __addr, __ptep) \ - __ptep_test_and_clear_young((__vma)->vm_mm->context.id, __addr, __ptep) - -#define __HAVE_ARCH_PTEP_GET_AND_CLEAR -static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, - pte_t *ptep) -{ - return __pte(pte_update(ptep, ~_PAGE_HASHPTE, 0)); -} - -#define __HAVE_ARCH_PTEP_SET_WRPROTECT -static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, - pte_t *ptep) -{ - pte_update(ptep, (_PAGE_RW | _PAGE_HWWRITE), 0); -} - -#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS -static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry, int dirty) -{ - unsigned long bits = pte_val(entry) & - (_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW); - pte_update(ptep, 0, bits); -} - -#define ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \ -({ \ - int __changed = !pte_same(*(__ptep), __entry); \ - if (__changed) { \ - __ptep_set_access_flags(__ptep, __entry, __dirty); \ - flush_tlb_page_nohash(__vma, __address); \ - } \ - __changed; \ -}) - -/* - * Macro to mark a page protection value as "uncacheable". - */ -#define pgprot_noncached(prot) (__pgprot(pgprot_val(prot) | _PAGE_NO_CACHE | _PAGE_GUARDED)) - -struct file; -extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn, - unsigned long size, pgprot_t vma_prot); -#define __HAVE_PHYS_MEM_ACCESS_PROT - -#define __HAVE_ARCH_PTE_SAME -#define pte_same(A,B) (((pte_val(A) ^ pte_val(B)) & ~_PAGE_HASHPTE) == 0) - -/* - * Note that on Book E processors, the pmd contains the kernel virtual - * (lowmem) address of the pte page. The physical address is less useful - * because everything runs with translation enabled (even the TLB miss - * handler). On everything else the pmd contains the physical address - * of the pte page. -- paulus - */ -#ifndef CONFIG_BOOKE -#define pmd_page_vaddr(pmd) \ - ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK)) -#define pmd_page(pmd) \ - (mem_map + (pmd_val(pmd) >> PAGE_SHIFT)) -#else -#define pmd_page_vaddr(pmd) \ - ((unsigned long) (pmd_val(pmd) & PAGE_MASK)) -#define pmd_page(pmd) \ - (mem_map + (__pa(pmd_val(pmd)) >> PAGE_SHIFT)) -#endif - -/* to find an entry in a kernel page-table-directory */ -#define pgd_offset_k(address) pgd_offset(&init_mm, address) - -/* to find an entry in a page-table-directory */ -#define pgd_index(address) ((address) >> PGDIR_SHIFT) -#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address)) - -/* Find an entry in the second-level page table.. */ -static inline pmd_t * pmd_offset(pgd_t * dir, unsigned long address) -{ - return (pmd_t *) dir; -} - -/* Find an entry in the third-level page table.. */ -#define pte_index(address) \ - (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) -#define pte_offset_kernel(dir, addr) \ - ((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(addr)) -#define pte_offset_map(dir, addr) \ - ((pte_t *) kmap_atomic(pmd_page(*(dir)), KM_PTE0) + pte_index(addr)) -#define pte_offset_map_nested(dir, addr) \ - ((pte_t *) kmap_atomic(pmd_page(*(dir)), KM_PTE1) + pte_index(addr)) - -#define pte_unmap(pte) kunmap_atomic(pte, KM_PTE0) -#define pte_unmap_nested(pte) kunmap_atomic(pte, KM_PTE1) - -extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; - -extern void paging_init(void); - -/* - * Encode and decode a swap entry. - * Note that the bits we use in a PTE for representing a swap entry - * must not include the _PAGE_PRESENT bit, the _PAGE_FILE bit, or the - *_PAGE_HASHPTE bit (if used). -- paulus - */ -#define __swp_type(entry) ((entry).val & 0x1f) -#define __swp_offset(entry) ((entry).val >> 5) -#define __swp_entry(type, offset) ((swp_entry_t) { (type) | ((offset) << 5) }) -#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) >> 3 }) -#define __swp_entry_to_pte(x) ((pte_t) { (x).val << 3 }) - -/* Encode and decode a nonlinear file mapping entry */ -#define PTE_FILE_MAX_BITS 29 -#define pte_to_pgoff(pte) (pte_val(pte) >> 3) -#define pgoff_to_pte(off) ((pte_t) { ((off) << 3) | _PAGE_FILE }) - -/* Values for nocacheflag and cmode */ -/* These are not used by the APUS kernel_map, but prevents - compilation errors. */ -#define KERNELMAP_FULL_CACHING 0 -#define KERNELMAP_NOCACHE_SER 1 -#define KERNELMAP_NOCACHE_NONSER 2 -#define KERNELMAP_NO_COPYBACK 3 - -/* - * Map some physical address range into the kernel address space. - */ -extern unsigned long kernel_map(unsigned long paddr, unsigned long size, - int nocacheflag, unsigned long *memavailp ); - -/* - * Set cache mode of (kernel space) address range. - */ -extern void kernel_set_cachemode (unsigned long address, unsigned long size, - unsigned int cmode); - -/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */ -#define kern_addr_valid(addr) (1) - -#ifdef CONFIG_PHYS_64BIT -extern int remap_pfn_range(struct vm_area_struct *vma, unsigned long from, - unsigned long paddr, unsigned long size, pgprot_t prot); - -static inline int io_remap_pfn_range(struct vm_area_struct *vma, - unsigned long vaddr, - unsigned long pfn, - unsigned long size, - pgprot_t prot) -{ - phys_addr_t paddr64 = fixup_bigphys_addr(pfn << PAGE_SHIFT, size); - return remap_pfn_range(vma, vaddr, paddr64 >> PAGE_SHIFT, size, prot); -} -#else -#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ - remap_pfn_range(vma, vaddr, pfn, size, prot) -#endif - -/* - * No page table caches to initialise - */ -#define pgtable_cache_init() do { } while (0) - -extern int get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep, - pmd_t **pmdp); - -#include <asm-generic/pgtable.h> - -#endif /* !__ASSEMBLY__ */ - -#endif /* _PPC_PGTABLE_H */ -#endif /* __KERNEL__ */ |