diff options
Diffstat (limited to 'include/asm-ppc/ppc4xx_dma.h')
| -rw-r--r-- | include/asm-ppc/ppc4xx_dma.h | 579 |
1 files changed, 0 insertions, 579 deletions
diff --git a/include/asm-ppc/ppc4xx_dma.h b/include/asm-ppc/ppc4xx_dma.h deleted file mode 100644 index 935d1e05366b..000000000000 --- a/include/asm-ppc/ppc4xx_dma.h +++ /dev/null @@ -1,579 +0,0 @@ -/* - * include/asm-ppc/ppc4xx_dma.h - * - * IBM PPC4xx DMA engine library - * - * Copyright 2000-2004 MontaVista Software Inc. - * - * Cleaned up a bit more, Matt Porter <mporter@kernel.crashing.org> - * - * Original code by Armin Kuster <akuster@mvista.com> - * and Pete Popov <ppopov@mvista.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifdef __KERNEL__ -#ifndef __ASMPPC_PPC4xx_DMA_H -#define __ASMPPC_PPC4xx_DMA_H - -#include <linux/types.h> -#include <asm/mmu.h> -#include <asm/ibm4xx.h> - -#undef DEBUG_4xxDMA - -#define MAX_PPC4xx_DMA_CHANNELS 4 - -/* - * Function return status codes - * These values are used to indicate whether or not the function - * call was successful, or a bad/invalid parameter was passed. - */ -#define DMA_STATUS_GOOD 0 -#define DMA_STATUS_BAD_CHANNEL 1 -#define DMA_STATUS_BAD_HANDLE 2 -#define DMA_STATUS_BAD_MODE 3 -#define DMA_STATUS_NULL_POINTER 4 -#define DMA_STATUS_OUT_OF_MEMORY 5 -#define DMA_STATUS_SGL_LIST_EMPTY 6 -#define DMA_STATUS_GENERAL_ERROR 7 -#define DMA_STATUS_CHANNEL_NOTFREE 8 - -#define DMA_CHANNEL_BUSY 0x80000000 - -/* - * These indicate status as returned from the DMA Status Register. - */ -#define DMA_STATUS_NO_ERROR 0 -#define DMA_STATUS_CS 1 /* Count Status */ -#define DMA_STATUS_TS 2 /* Transfer Status */ -#define DMA_STATUS_DMA_ERROR 3 /* DMA Error Occurred */ -#define DMA_STATUS_DMA_BUSY 4 /* The channel is busy */ - - -/* - * DMA Channel Control Registers - */ - -#ifdef CONFIG_44x -#define PPC4xx_DMA_64BIT -#define DMA_CR_OFFSET 1 -#else -#define DMA_CR_OFFSET 0 -#endif - -#define DMA_CE_ENABLE (1<<31) /* DMA Channel Enable */ -#define SET_DMA_CE_ENABLE(x) (((x)&0x1)<<31) -#define GET_DMA_CE_ENABLE(x) (((x)&DMA_CE_ENABLE)>>31) - -#define DMA_CIE_ENABLE (1<<30) /* DMA Channel Interrupt Enable */ -#define SET_DMA_CIE_ENABLE(x) (((x)&0x1)<<30) -#define GET_DMA_CIE_ENABLE(x) (((x)&DMA_CIE_ENABLE)>>30) - -#define DMA_TD (1<<29) -#define SET_DMA_TD(x) (((x)&0x1)<<29) -#define GET_DMA_TD(x) (((x)&DMA_TD)>>29) - -#define DMA_PL (1<<28) /* Peripheral Location */ -#define SET_DMA_PL(x) (((x)&0x1)<<28) -#define GET_DMA_PL(x) (((x)&DMA_PL)>>28) - -#define EXTERNAL_PERIPHERAL 0 -#define INTERNAL_PERIPHERAL 1 - -#define SET_DMA_PW(x) (((x)&0x3)<<(26-DMA_CR_OFFSET)) /* Peripheral Width */ -#define DMA_PW_MASK SET_DMA_PW(3) -#define PW_8 0 -#define PW_16 1 -#define PW_32 2 -#define PW_64 3 -/* FIXME: Add PW_128 support for 440GP DMA block */ -#define GET_DMA_PW(x) (((x)&DMA_PW_MASK)>>(26-DMA_CR_OFFSET)) - -#define DMA_DAI (1<<(25-DMA_CR_OFFSET)) /* Destination Address Increment */ -#define SET_DMA_DAI(x) (((x)&0x1)<<(25-DMA_CR_OFFSET)) - -#define DMA_SAI (1<<(24-DMA_CR_OFFSET)) /* Source Address Increment */ -#define SET_DMA_SAI(x) (((x)&0x1)<<(24-DMA_CR_OFFSET)) - -#define DMA_BEN (1<<(23-DMA_CR_OFFSET)) /* Buffer Enable */ -#define SET_DMA_BEN(x) (((x)&0x1)<<(23-DMA_CR_OFFSET)) - -#define SET_DMA_TM(x) (((x)&0x3)<<(21-DMA_CR_OFFSET)) /* Transfer Mode */ -#define DMA_TM_MASK SET_DMA_TM(3) -#define TM_PERIPHERAL 0 /* Peripheral */ -#define TM_RESERVED 1 /* Reserved */ -#define TM_S_MM 2 /* Memory to Memory */ -#define TM_D_MM 3 /* Device Paced Memory to Memory */ -#define GET_DMA_TM(x) (((x)&DMA_TM_MASK)>>(21-DMA_CR_OFFSET)) - -#define SET_DMA_PSC(x) (((x)&0x3)<<(19-DMA_CR_OFFSET)) /* Peripheral Setup Cycles */ -#define DMA_PSC_MASK SET_DMA_PSC(3) -#define GET_DMA_PSC(x) (((x)&DMA_PSC_MASK)>>(19-DMA_CR_OFFSET)) - -#define SET_DMA_PWC(x) (((x)&0x3F)<<(13-DMA_CR_OFFSET)) /* Peripheral Wait Cycles */ -#define DMA_PWC_MASK SET_DMA_PWC(0x3F) -#define GET_DMA_PWC(x) (((x)&DMA_PWC_MASK)>>(13-DMA_CR_OFFSET)) - -#define SET_DMA_PHC(x) (((x)&0x7)<<(10-DMA_CR_OFFSET)) /* Peripheral Hold Cycles */ -#define DMA_PHC_MASK SET_DMA_PHC(0x7) -#define GET_DMA_PHC(x) (((x)&DMA_PHC_MASK)>>(10-DMA_CR_OFFSET)) - -#define DMA_ETD_OUTPUT (1<<(9-DMA_CR_OFFSET)) /* EOT pin is a TC output */ -#define SET_DMA_ETD(x) (((x)&0x1)<<(9-DMA_CR_OFFSET)) - -#define DMA_TCE_ENABLE (1<<(8-DMA_CR_OFFSET)) -#define SET_DMA_TCE(x) (((x)&0x1)<<(8-DMA_CR_OFFSET)) - -#define DMA_DEC (1<<(2)) /* Address Decrement */ -#define SET_DMA_DEC(x) (((x)&0x1)<<2) -#define GET_DMA_DEC(x) (((x)&DMA_DEC)>>2) - - -/* - * Transfer Modes - * These modes are defined in a way that makes it possible to - * simply "or" in the value in the control register. - */ - -#define DMA_MODE_MM (SET_DMA_TM(TM_S_MM)) /* memory to memory */ - - /* Device-paced memory to memory, */ - /* device is at source address */ -#define DMA_MODE_MM_DEVATSRC (DMA_TD | SET_DMA_TM(TM_D_MM)) - - /* Device-paced memory to memory, */ - /* device is at destination address */ -#define DMA_MODE_MM_DEVATDST (SET_DMA_TM(TM_D_MM)) - -/* 405gp/440gp */ -#define SET_DMA_PREFETCH(x) (((x)&0x3)<<(4-DMA_CR_OFFSET)) /* Memory Read Prefetch */ -#define DMA_PREFETCH_MASK SET_DMA_PREFETCH(3) -#define PREFETCH_1 0 /* Prefetch 1 Double Word */ -#define PREFETCH_2 1 -#define PREFETCH_4 2 -#define GET_DMA_PREFETCH(x) (((x)&DMA_PREFETCH_MASK)>>(4-DMA_CR_OFFSET)) - -#define DMA_PCE (1<<(3-DMA_CR_OFFSET)) /* Parity Check Enable */ -#define SET_DMA_PCE(x) (((x)&0x1)<<(3-DMA_CR_OFFSET)) -#define GET_DMA_PCE(x) (((x)&DMA_PCE)>>(3-DMA_CR_OFFSET)) - -/* stb3x */ - -#define DMA_ECE_ENABLE (1<<5) -#define SET_DMA_ECE(x) (((x)&0x1)<<5) -#define GET_DMA_ECE(x) (((x)&DMA_ECE_ENABLE)>>5) - -#define DMA_TCD_DISABLE (1<<4) -#define SET_DMA_TCD(x) (((x)&0x1)<<4) -#define GET_DMA_TCD(x) (((x)&DMA_TCD_DISABLE)>>4) - -typedef uint32_t sgl_handle_t; - -#ifdef CONFIG_PPC4xx_EDMA - -#define SGL_LIST_SIZE 4096 -#define DMA_PPC4xx_SIZE SGL_LIST_SIZE - -#define SET_DMA_PRIORITY(x) (((x)&0x3)<<(6-DMA_CR_OFFSET)) /* DMA Channel Priority */ -#define DMA_PRIORITY_MASK SET_DMA_PRIORITY(3) -#define PRIORITY_LOW 0 -#define PRIORITY_MID_LOW 1 -#define PRIORITY_MID_HIGH 2 -#define PRIORITY_HIGH 3 -#define GET_DMA_PRIORITY(x) (((x)&DMA_PRIORITY_MASK)>>(6-DMA_CR_OFFSET)) - -/* - * DMA Polarity Configuration Register - */ -#define DMAReq_ActiveLow(chan) (1<<(31-(chan*3))) -#define DMAAck_ActiveLow(chan) (1<<(30-(chan*3))) -#define EOT_ActiveLow(chan) (1<<(29-(chan*3))) /* End of Transfer */ - -/* - * DMA Sleep Mode Register - */ -#define SLEEP_MODE_ENABLE (1<<21) - -/* - * DMA Status Register - */ -#define DMA_CS0 (1<<31) /* Terminal Count has been reached */ -#define DMA_CS1 (1<<30) -#define DMA_CS2 (1<<29) -#define DMA_CS3 (1<<28) - -#define DMA_TS0 (1<<27) /* End of Transfer has been requested */ -#define DMA_TS1 (1<<26) -#define DMA_TS2 (1<<25) -#define DMA_TS3 (1<<24) - -#define DMA_CH0_ERR (1<<23) /* DMA Chanel 0 Error */ -#define DMA_CH1_ERR (1<<22) -#define DMA_CH2_ERR (1<<21) -#define DMA_CH3_ERR (1<<20) - -#define DMA_IN_DMA_REQ0 (1<<19) /* Internal DMA Request is pending */ -#define DMA_IN_DMA_REQ1 (1<<18) -#define DMA_IN_DMA_REQ2 (1<<17) -#define DMA_IN_DMA_REQ3 (1<<16) - -#define DMA_EXT_DMA_REQ0 (1<<15) /* External DMA Request is pending */ -#define DMA_EXT_DMA_REQ1 (1<<14) -#define DMA_EXT_DMA_REQ2 (1<<13) -#define DMA_EXT_DMA_REQ3 (1<<12) - -#define DMA_CH0_BUSY (1<<11) /* DMA Channel 0 Busy */ -#define DMA_CH1_BUSY (1<<10) -#define DMA_CH2_BUSY (1<<9) -#define DMA_CH3_BUSY (1<<8) - -#define DMA_SG0 (1<<7) /* DMA Channel 0 Scatter/Gather in progress */ -#define DMA_SG1 (1<<6) -#define DMA_SG2 (1<<5) -#define DMA_SG3 (1<<4) - -/* DMA Channel Count Register */ -#define DMA_CTC_BTEN (1<<23) /* Burst Enable/Disable bit */ -#define DMA_CTC_BSIZ_MSK (3<<21) /* Mask of the Burst size bits */ -#define DMA_CTC_BSIZ_2 (0) -#define DMA_CTC_BSIZ_4 (1<<21) -#define DMA_CTC_BSIZ_8 (2<<21) -#define DMA_CTC_BSIZ_16 (3<<21) - -/* - * DMA SG Command Register - */ -#define SSG_ENABLE(chan) (1<<(31-chan)) /* Start Scatter Gather */ -#define SSG_MASK_ENABLE(chan) (1<<(15-chan)) /* Enable writing to SSG0 bit */ - -/* - * DMA Scatter/Gather Descriptor Bit fields - */ -#define SG_LINK (1<<31) /* Link */ -#define SG_TCI_ENABLE (1<<29) /* Enable Terminal Count Interrupt */ -#define SG_ETI_ENABLE (1<<28) /* Enable End of Transfer Interrupt */ -#define SG_ERI_ENABLE (1<<27) /* Enable Error Interrupt */ -#define SG_COUNT_MASK 0xFFFF /* Count Field */ - -#define SET_DMA_CONTROL \ - (SET_DMA_CIE_ENABLE(p_init->int_enable) | /* interrupt enable */ \ - SET_DMA_BEN(p_init->buffer_enable) | /* buffer enable */\ - SET_DMA_ETD(p_init->etd_output) | /* end of transfer pin */ \ - SET_DMA_TCE(p_init->tce_enable) | /* terminal count enable */ \ - SET_DMA_PL(p_init->pl) | /* peripheral location */ \ - SET_DMA_DAI(p_init->dai) | /* dest addr increment */ \ - SET_DMA_SAI(p_init->sai) | /* src addr increment */ \ - SET_DMA_PRIORITY(p_init->cp) | /* channel priority */ \ - SET_DMA_PW(p_init->pwidth) | /* peripheral/bus width */ \ - SET_DMA_PSC(p_init->psc) | /* peripheral setup cycles */ \ - SET_DMA_PWC(p_init->pwc) | /* peripheral wait cycles */ \ - SET_DMA_PHC(p_init->phc) | /* peripheral hold cycles */ \ - SET_DMA_PREFETCH(p_init->pf) /* read prefetch */) - -#define GET_DMA_POLARITY(chan) (DMAReq_ActiveLow(chan) | DMAAck_ActiveLow(chan) | EOT_ActiveLow(chan)) - -#elif defined(CONFIG_STB03xxx) /* stb03xxx */ - -#define DMA_PPC4xx_SIZE 4096 - -/* - * DMA Status Register - */ - -#define SET_DMA_PRIORITY(x) (((x)&0x00800001)) /* DMA Channel Priority */ -#define DMA_PRIORITY_MASK 0x00800001 -#define PRIORITY_LOW 0x00000000 -#define PRIORITY_MID_LOW 0x00000001 -#define PRIORITY_MID_HIGH 0x00800000 -#define PRIORITY_HIGH 0x00800001 -#define GET_DMA_PRIORITY(x) (((((x)&DMA_PRIORITY_MASK) &0x00800000) >> 22 ) | (((x)&DMA_PRIORITY_MASK) &0x00000001)) - -#define DMA_CS0 (1<<31) /* Terminal Count has been reached */ -#define DMA_CS1 (1<<30) -#define DMA_CS2 (1<<29) -#define DMA_CS3 (1<<28) - -#define DMA_TS0 (1<<27) /* End of Transfer has been requested */ -#define DMA_TS1 (1<<26) -#define DMA_TS2 (1<<25) -#define DMA_TS3 (1<<24) - -#define DMA_CH0_ERR (1<<23) /* DMA Chanel 0 Error */ -#define DMA_CH1_ERR (1<<22) -#define DMA_CH2_ERR (1<<21) -#define DMA_CH3_ERR (1<<20) - -#define DMA_CT0 (1<<19) /* Chained transfere */ - -#define DMA_IN_DMA_REQ0 (1<<18) /* Internal DMA Request is pending */ -#define DMA_IN_DMA_REQ1 (1<<17) -#define DMA_IN_DMA_REQ2 (1<<16) -#define DMA_IN_DMA_REQ3 (1<<15) - -#define DMA_EXT_DMA_REQ0 (1<<14) /* External DMA Request is pending */ -#define DMA_EXT_DMA_REQ1 (1<<13) -#define DMA_EXT_DMA_REQ2 (1<<12) -#define DMA_EXT_DMA_REQ3 (1<<11) - -#define DMA_CH0_BUSY (1<<10) /* DMA Channel 0 Busy */ -#define DMA_CH1_BUSY (1<<9) -#define DMA_CH2_BUSY (1<<8) -#define DMA_CH3_BUSY (1<<7) - -#define DMA_CT1 (1<<6) /* Chained transfere */ -#define DMA_CT2 (1<<5) -#define DMA_CT3 (1<<4) - -#define DMA_CH_ENABLE (1<<7) -#define SET_DMA_CH(x) (((x)&0x1)<<7) -#define GET_DMA_CH(x) (((x)&DMA_CH_ENABLE)>>7) - -/* STBx25xxx dma unique */ -/* enable device port on a dma channel - * example ext 0 on dma 1 - */ - -#define SSP0_RECV 15 -#define SSP0_XMIT 14 -#define EXT_DMA_0 12 -#define SC1_XMIT 11 -#define SC1_RECV 10 -#define EXT_DMA_2 9 -#define EXT_DMA_3 8 -#define SERIAL2_XMIT 7 -#define SERIAL2_RECV 6 -#define SC0_XMIT 5 -#define SC0_RECV 4 -#define SERIAL1_XMIT 3 -#define SERIAL1_RECV 2 -#define SERIAL0_XMIT 1 -#define SERIAL0_RECV 0 - -#define DMA_CHAN_0 1 -#define DMA_CHAN_1 2 -#define DMA_CHAN_2 3 -#define DMA_CHAN_3 4 - -/* end STBx25xx */ - -/* - * Bit 30 must be one for Redwoods, otherwise transfers may receive errors. - */ -#define DMA_CR_MB0 0x2 - -#define SET_DMA_CONTROL \ - (SET_DMA_CIE_ENABLE(p_init->int_enable) | /* interrupt enable */ \ - SET_DMA_ETD(p_init->etd_output) | /* end of transfer pin */ \ - SET_DMA_TCE(p_init->tce_enable) | /* terminal count enable */ \ - SET_DMA_PL(p_init->pl) | /* peripheral location */ \ - SET_DMA_DAI(p_init->dai) | /* dest addr increment */ \ - SET_DMA_SAI(p_init->sai) | /* src addr increment */ \ - SET_DMA_PRIORITY(p_init->cp) | /* channel priority */ \ - SET_DMA_PW(p_init->pwidth) | /* peripheral/bus width */ \ - SET_DMA_PSC(p_init->psc) | /* peripheral setup cycles */ \ - SET_DMA_PWC(p_init->pwc) | /* peripheral wait cycles */ \ - SET_DMA_PHC(p_init->phc) | /* peripheral hold cycles */ \ - SET_DMA_TCD(p_init->tcd_disable) | /* TC chain mode disable */ \ - SET_DMA_ECE(p_init->ece_enable) | /* ECE chanin mode enable */ \ - SET_DMA_CH(p_init->ch_enable) | /* Chain enable */ \ - DMA_CR_MB0 /* must be one */) - -#define GET_DMA_POLARITY(chan) chan - -#endif - -typedef struct { - unsigned short in_use; /* set when channel is being used, clr when - * available. - */ - /* - * Valid polarity settings: - * DMAReq_ActiveLow(n) - * DMAAck_ActiveLow(n) - * EOT_ActiveLow(n) - * - * n is 0 to max dma chans - */ - unsigned int polarity; - - char buffer_enable; /* Boolean: buffer enable */ - char tce_enable; /* Boolean: terminal count enable */ - char etd_output; /* Boolean: eot pin is a tc output */ - char pce; /* Boolean: parity check enable */ - - /* - * Peripheral location: - * INTERNAL_PERIPHERAL (UART0 on the 405GP) - * EXTERNAL_PERIPHERAL - */ - char pl; /* internal/external peripheral */ - - /* - * Valid pwidth settings: - * PW_8 - * PW_16 - * PW_32 - * PW_64 - */ - unsigned int pwidth; - - char dai; /* Boolean: dst address increment */ - char sai; /* Boolean: src address increment */ - - /* - * Valid psc settings: 0-3 - */ - unsigned int psc; /* Peripheral Setup Cycles */ - - /* - * Valid pwc settings: - * 0-63 - */ - unsigned int pwc; /* Peripheral Wait Cycles */ - - /* - * Valid phc settings: - * 0-7 - */ - unsigned int phc; /* Peripheral Hold Cycles */ - - /* - * Valid cp (channel priority) settings: - * PRIORITY_LOW - * PRIORITY_MID_LOW - * PRIORITY_MID_HIGH - * PRIORITY_HIGH - */ - unsigned int cp; /* channel priority */ - - /* - * Valid pf (memory read prefetch) settings: - * - * PREFETCH_1 - * PREFETCH_2 - * PREFETCH_4 - */ - unsigned int pf; /* memory read prefetch */ - - /* - * Boolean: channel interrupt enable - * NOTE: for sgl transfers, only the last descriptor will be setup to - * interrupt. - */ - char int_enable; - - char shift; /* easy access to byte_count shift, based on */ - /* the width of the channel */ - - uint32_t control; /* channel control word */ - - /* These variabled are used ONLY in single dma transfers */ - unsigned int mode; /* transfer mode */ - phys_addr_t addr; - char ce; /* channel enable */ -#ifdef CONFIG_STB03xxx - char ch_enable; - char tcd_disable; - char ece_enable; - char td; /* transfer direction */ -#endif - - char int_on_final_sg;/* for scatter/gather - only interrupt on last sg */ -} ppc_dma_ch_t; - -/* - * PPC44x DMA implementations have a slightly different - * descriptor layout. Probably moved about due to the - * change to 64-bit addresses and link pointer. I don't - * know why they didn't just leave control_count after - * the dst_addr. - */ -#ifdef PPC4xx_DMA_64BIT -typedef struct { - uint32_t control; - uint32_t control_count; - phys_addr_t src_addr; - phys_addr_t dst_addr; - phys_addr_t next; -} ppc_sgl_t; -#else -typedef struct { - uint32_t control; - phys_addr_t src_addr; - phys_addr_t dst_addr; - uint32_t control_count; - uint32_t next; -} ppc_sgl_t; -#endif - -typedef struct { - unsigned int dmanr; - uint32_t control; /* channel ctrl word; loaded from each descrptr */ - uint32_t sgl_control; /* LK, TCI, ETI, and ERI bits in sgl descriptor */ - dma_addr_t dma_addr; /* dma (physical) address of this list */ - ppc_sgl_t *phead; - dma_addr_t phead_dma; - ppc_sgl_t *ptail; - dma_addr_t ptail_dma; -} sgl_list_info_t; - -typedef struct { - phys_addr_t *src_addr; - phys_addr_t *dst_addr; - phys_addr_t dma_src_addr; - phys_addr_t dma_dst_addr; -} pci_alloc_desc_t; - -extern ppc_dma_ch_t dma_channels[]; - -/* - * The DMA API are in ppc4xx_dma.c and ppc4xx_sgdma.c - */ -extern int ppc4xx_init_dma_channel(unsigned int, ppc_dma_ch_t *); -extern int ppc4xx_get_channel_config(unsigned int, ppc_dma_ch_t *); -extern int ppc4xx_set_channel_priority(unsigned int, unsigned int); -extern unsigned int ppc4xx_get_peripheral_width(unsigned int); -extern void ppc4xx_set_sg_addr(int, phys_addr_t); -extern int ppc4xx_add_dma_sgl(sgl_handle_t, phys_addr_t, phys_addr_t, unsigned int); -extern void ppc4xx_enable_dma_sgl(sgl_handle_t); -extern void ppc4xx_disable_dma_sgl(sgl_handle_t); -extern int ppc4xx_get_dma_sgl_residue(sgl_handle_t, phys_addr_t *, phys_addr_t *); -extern int ppc4xx_delete_dma_sgl_element(sgl_handle_t, phys_addr_t *, phys_addr_t *); -extern int ppc4xx_alloc_dma_handle(sgl_handle_t *, unsigned int, unsigned int); -extern void ppc4xx_free_dma_handle(sgl_handle_t); -extern int ppc4xx_get_dma_status(void); -extern int ppc4xx_enable_burst(unsigned int); -extern int ppc4xx_disable_burst(unsigned int); -extern int ppc4xx_set_burst_size(unsigned int, unsigned int); -extern void ppc4xx_set_src_addr(int dmanr, phys_addr_t src_addr); -extern void ppc4xx_set_dst_addr(int dmanr, phys_addr_t dst_addr); -extern void ppc4xx_enable_dma(unsigned int dmanr); -extern void ppc4xx_disable_dma(unsigned int dmanr); -extern void ppc4xx_set_dma_count(unsigned int dmanr, unsigned int count); -extern int ppc4xx_get_dma_residue(unsigned int dmanr); -extern void ppc4xx_set_dma_addr2(unsigned int dmanr, phys_addr_t src_dma_addr, - phys_addr_t dst_dma_addr); -extern int ppc4xx_enable_dma_interrupt(unsigned int dmanr); -extern int ppc4xx_disable_dma_interrupt(unsigned int dmanr); -extern int ppc4xx_clr_dma_status(unsigned int dmanr); -extern int ppc4xx_map_dma_port(unsigned int dmanr, unsigned int ocp_dma,short dma_chan); -extern int ppc4xx_disable_dma_port(unsigned int dmanr, unsigned int ocp_dma,short dma_chan); -extern int ppc4xx_set_dma_mode(unsigned int dmanr, unsigned int mode); - -/* These are in kernel/dma.c: */ - -/* reserve a DMA channel */ -extern int request_dma(unsigned int dmanr, const char *device_id); -/* release it again */ -extern void free_dma(unsigned int dmanr); -#endif -#endif /* __KERNEL__ */ |