summaryrefslogtreecommitdiffstats
path: root/Documentation/README.DAC960
diff options
context:
space:
mode:
authorRalf Baechle <ralf@linux-mips.org>1999-10-09 00:00:47 +0000
committerRalf Baechle <ralf@linux-mips.org>1999-10-09 00:00:47 +0000
commitd6434e1042f3b0a6dfe1b1f615af369486f9b1fa (patch)
treee2be02f33984c48ec019c654051d27964e42c441 /Documentation/README.DAC960
parent609d1e803baf519487233b765eb487f9ec227a18 (diff)
Merge with 2.3.19.
Diffstat (limited to 'Documentation/README.DAC960')
-rw-r--r--Documentation/README.DAC960717
1 files changed, 717 insertions, 0 deletions
diff --git a/Documentation/README.DAC960 b/Documentation/README.DAC960
new file mode 100644
index 000000000..2a80042dc
--- /dev/null
+++ b/Documentation/README.DAC960
@@ -0,0 +1,717 @@
+ Mylex DAC960/DAC1100 PCI RAID Controller Driver for Linux
+
+ Version 2.2.4 for Linux 2.2.11
+ Version 2.0.4 for Linux 2.0.37
+
+ PRODUCTION RELEASE
+
+ 23 August 1999
+
+ Leonard N. Zubkoff
+ Dandelion Digital
+ lnz@dandelion.com
+
+ Copyright 1998-1999 by Leonard N. Zubkoff <lnz@dandelion.com>
+
+
+ INTRODUCTION
+
+Mylex, Inc. designs and manufactures a variety of high performance PCI RAID
+controllers. Mylex Corporation is located at 34551 Ardenwood Blvd., Fremont,
+California 94555, USA and can be reached at 510/796-6100 or on the World Wide
+Web at http://www.mylex.com. Mylex RAID Technical Support can be reached by
+electronic mail at support@mylex.com (for eXtremeRAID 1100 and older DAC960
+models) or techsup@mylex.com (for AcceleRAID models), by voice at 510/608-2400,
+or by FAX at 510/745-7715. Contact information for offices in Europe and Japan
+is available on the Web site.
+
+The latest information on Linux support for DAC960 PCI RAID Controllers, as
+well as the most recent release of this driver, will always be available from
+my Linux Home Page at URL "http://www.dandelion.com/Linux/". The Linux DAC960
+driver supports all current DAC960 PCI family controllers including the
+AcceleRAID models, as well as the eXtremeRAID 1100; see below for a complete
+list. For simplicity, in most places this documentation refers to DAC960
+generically rather than explicitly listing all the models.
+
+Bug reports should be sent via electronic mail to "lnz@dandelion.com". Please
+include with the bug report the complete configuration messages reported by the
+driver at startup, along with any subsequent system messages relevant to the
+controller's operation, and a detailed description of your system's hardware
+configuration.
+
+Please consult the DAC960 RAID controller documentation for detailed
+information regarding installation and configuration of the controllers. This
+document primarily provides information specific to the Linux DAC960 support.
+
+
+ DRIVER FEATURES
+
+The DAC960 RAID controllers are supported solely as high performance RAID
+controllers, not as interfaces to arbitrary SCSI devices. The Linux DAC960
+driver operates at the block device level, the same level as the SCSI and IDE
+drivers. Unlike other RAID controllers currently supported on Linux, the
+DAC960 driver is not dependent on the SCSI subsystem, and hence avoids all the
+complexity and unnecessary code that would be associated with an implementation
+as a SCSI driver. The DAC960 driver is designed for as high a performance as
+possible with no compromises or extra code for compatibility with lower
+performance devices. The DAC960 driver includes extensive error logging and
+online configuration management capabilities. Except for initial configuration
+of the controller and adding new disk drives, most everything can be handled
+from Linux while the system is operational.
+
+The DAC960 driver is architected to support up to 8 controllers per system.
+Each DAC960 controller can support up to 15 disk drives per channel, for a
+maximum of 45 drives on a three channel controller. The drives installed on a
+controller are divided into one or more "Drive Groups", and then each Drive
+Group is subdivided further into 1 to 32 "Logical Drives". Each Logical Drive
+has a specific RAID Level and caching policy associated with it, and it appears
+to Linux as a single block device. Logical Drives are further subdivided into
+up to 7 partitions through the normal Linux and PC disk partitioning schemes.
+Logical Drives are also known as "System Drives", and Drive Groups are also
+called "Packs". Both terms are in use in the Mylex documentation; I have
+chosen to standardize on the more generic "Logical Drive" and "Drive Group".
+
+DAC960 RAID disk devices are named in the style of the Device File System
+(DEVFS). The device corresponding to Logical Drive D on Controller C is
+referred to as /dev/rd/cCdD, and the partitions are called /dev/rd/cCdDp1
+through /dev/rd/cCdDp7. For example, partition 3 of Logical Drive 5 on
+Controller 2 is referred to as /dev/rd/c2d5p3. Note that unlike with SCSI
+disks the device names will not change in the event of a disk drive failure.
+The DAC960 driver is assigned major numbers 48 - 55 with one major number per
+controller. The 8 bits of minor number are divided into 5 bits for the Logical
+Drive and 3 bits for the partition.
+
+
+ SUPPORTED DAC960/DAC1100 PCI RAID CONTROLLERS
+
+The following list comprises the supported DAC960 and DAC1100 PCI RAID
+Controllers as of the date of this document. It is recommended that anyone
+purchasing a Mylex PCI RAID Controller not in the following table contact the
+author beforehand to verify that it is or will be supported.
+
+eXtremeRAID 1100 (DAC1164P)
+ 3 Wide Ultra-2/LVD SCSI channels
+ 233MHz StrongARM SA 110 Processor
+ 64 Bit PCI (backward compatible with 32 Bit PCI slots)
+ 16MB/32MB/64MB Parity SDRAM Memory with Battery Backup
+
+AcceleRAID 250 (DAC960PTL1)
+ Uses onboard Symbios SCSI chips on certain motherboards
+ Also includes one onboard Wide Ultra-2/LVD SCSI Channel
+ 66MHz Intel i960RD RISC Processor
+ 4MB/8MB/16MB/32MB/64MB/128MB ECC EDO Memory
+
+AcceleRAID 200 (DAC960PTL0)
+ Uses onboard Symbios SCSI chips on certain motherboards
+ Includes no onboard SCSI Channels
+ 66MHz Intel i960RD RISC Processor
+ 4MB/8MB/16MB/32MB/64MB/128MB ECC EDO Memory
+
+AcceleRAID 150 (DAC960PRL)
+ Uses onboard Symbios SCSI chips on certain motherboards
+ Also includes one onboard Wide Ultra-2/LVD SCSI Channel
+ 33MHz Intel i960RP RISC Processor
+ 4MB Parity EDO Memory
+
+DAC960PJ 1/2/3 Wide Ultra SCSI-3 Channels
+ 66MHz Intel i960RD RISC Processor
+ 4MB/8MB/16MB/32MB/64MB/128MB ECC EDO Memory
+
+DAC960PG 1/2/3 Wide Ultra SCSI-3 Channels
+ 33MHz Intel i960RP RISC Processor
+ 4MB/8MB ECC EDO Memory
+
+DAC960PU 1/2/3 Wide Ultra SCSI-3 Channels
+ Intel i960CF RISC Processor
+ 4MB/8MB EDRAM or 2MB/4MB/8MB/16MB/32MB DRAM Memory
+
+DAC960PD 1/2/3 Wide Fast SCSI-2 Channels
+ Intel i960CF RISC Processor
+ 4MB/8MB EDRAM or 2MB/4MB/8MB/16MB/32MB DRAM Memory
+
+DAC960PL 1/2/3 Wide Fast SCSI-2 Channels
+ Intel i960 RISC Processor
+ 2MB/4MB/8MB/16MB/32MB DRAM Memory
+
+For the eXtremeRAID 1100, firmware version 5.06-0-52 or above is required.
+
+For the AcceleRAID 250, 200, and 150, firmware version 4.06-0-57 or above is
+required.
+
+For the DAC960PJ and DAC960PG, firmware version 4.06-0-00 or above is required.
+
+For the DAC960PU, DAC960PD, and DAC960PL, firmware version 3.51-0-04 or above
+is required.
+
+Note that earlier revisions of the DAC960PU, DAC960PD, and DAC960PL controllers
+were delivered with version 2.xx firmware. Version 2.xx firmware is not
+supported by this driver and no support is envisioned. Contact Mylex RAID
+Technical Support to inquire about upgrading controllers with version 2.xx
+firmware to version 3.51-0-04. Upgrading to version 3.xx firmware requires
+installation of higher capacity Flash ROM chips, and not all DAC960PD and
+DAC960PL controllers can be upgraded.
+
+Please note that not all SCSI disk drives are suitable for use with DAC960
+controllers, and only particular firmware versions of any given model may
+actually function correctly. Similarly, not all motherboards have a BIOS that
+properly initializes the AcceleRAID 250, AcceleRAID 200, AcceleRAID 150,
+DAC960PJ, and DAC960PG because the Intel i960RD/RP is a multi-function device.
+If in doubt, contact Mylex RAID Technical Support (support@mylex.com) to verify
+compatibility. Mylex makes available a hard disk compatibility list by FTP at
+ftp://ftp.mylex.com/pub/dac960/diskcomp.html.
+
+
+ DRIVER INSTALLATION
+
+This distribution was prepared for Linux kernel version 2.2.11 or 2.0.37.
+
+To install the DAC960 RAID driver, you may use the following commands,
+replacing "/usr/src" with wherever you keep your Linux kernel source tree:
+
+ cd /usr/src
+ tar -xvzf DAC960-2.2.4.tar.gz (or DAC960-2.0.4.tar.gz)
+ mv README.DAC960 linux/Documentation
+ mv DAC960.[ch] linux/drivers/block
+ patch -p0 < DAC960.patch
+ cd linux
+ make config
+ make depend
+ make bzImage (or zImage)
+
+Then install "arch/i386/boot/bzImage" or "arch/i386/boot/zImage" as your
+standard kernel, run lilo if appropriate, and reboot.
+
+To create the necessary devices in /dev, the "make_rd" script included in
+"DAC960-Utilities.tar.gz" from http://www.dandelion.com/Linux/ may be used.
+LILO 21 and FDISK v2.9 include DAC960 support; also included in this archive
+are patches to LILO 20 and FDISK v2.8 that add DAC960 support, along with
+statically linked executables of LILO and FDISK. This modified version of LILO
+will allow booting from a DAC960 controller and/or mounting the root file
+system from a DAC960.
+
+Red Hat Linux 6.0 and SuSE Linux 6.1 include support for Mylex PCI RAID
+controllers. Installing directly onto a DAC960 may be problematic from other
+Linux distributions until their installation utilities are updated.
+
+
+ INSTALLATION NOTES
+
+Before installing Linux or adding DAC960 logical drives to an existing Linux
+system, the controller must first be configured to provide one or more logical
+drives using the BIOS Configuration Utility or DACCF. Please note that since
+there are only at most 6 usable partitions on each logical drive, systems
+requiring more partitions should subdivide a drive group into multiple logical
+drives, each of which can have up to 6 partitions. Also, note that with large
+disk arrays it is advisable to enable the 8GB BIOS Geometry (255/63) rather
+than accepting the default 2GB BIOS Geometry (128/32); failing to so do will
+cause the logical drive geometry to have more than 65535 cylinders which will
+make it impossible for FDISK to be used properly. The 8GB BIOS Geometry can be
+enabled by configuring the DAC960 BIOS, which is accessible via Alt-M during
+the BIOS initialization sequence.
+
+For maximum performance and the most efficient E2FSCK performance, it is
+recommended that EXT2 file systems be built with a 4KB block size and 16 block
+stride to match the DAC960 controller's 64KB default stripe size. The command
+"mke2fs -b 4096 -R stride=16 <device>" is appropriate. Unless there will be a
+large number of small files on the file systems, it is also beneficial to add
+the "-i 16384" option to increase the bytes per inode parameter thereby
+reducing the file system metadata. Finally, on systems that will only be run
+with Linux 2.2 or later kernels it is beneficial to enable sparse superblocks
+with the "-s 1" option.
+
+
+ DAC960 ANNOUNCEMENTS MAILING LIST
+
+The DAC960 Announcements Mailing List provides a forum for informing Linux
+users of new driver releases and other announcements regarding Linux support
+for DAC960 PCI RAID Controllers. To join the mailing list, send a message to
+"dac960-announce-request@dandelion.com" with the line "subscribe" in the
+message body.
+
+
+ CONTROLLER CONFIGURATION AND STATUS MONITORING
+
+The DAC960 RAID controllers running firmware 4.06 or above include a Background
+Initialization facility so that system downtime is minimized both for initial
+installation and subsequent configuration of additional storage. The BIOS
+Configuration Utility (accessible via Alt-R during the BIOS initialization
+sequence) is used to quickly configure the controller, and then the logical
+drives that have been created are available for immediate use even while they
+are still being initialized by the controller. The primary need for online
+configuration and status monitoring is then to avoid system downtime when disk
+drives fail and must be replaced. Mylex's online monitoring and configuration
+utilities are being ported to Linux and will become available at some point in
+the future. Note that with a SAF-TE (SCSI Accessed Fault-Tolerant Enclosure)
+enclosure, the controller is able to rebuild failed drives automatically as
+soon as a drive replacement is made available.
+
+The primary interfaces for controller configuration and status monitoring are
+special files created in the /proc/rd/... hierarchy along with the normal
+system console logging mechanism. Whenever the system is operating, the DAC960
+driver queries each controller for status information every 10 seconds, and
+checks for additional conditions every 60 seconds. The initial status of each
+controller is always available for controller N in /proc/rd/cN/initial_status,
+and the current status as of the last status monitoring query is available in
+/proc/rd/cN/current_status. In addition, status changes are also logged by the
+driver to the system console and will appear in the log files maintained by
+syslog. The progress of asynchronous rebuild or consistency check operations
+is also available in /proc/rd/cN/current_status, and progress messages are
+logged to the system console at most every 60 seconds.
+
+Starting with the 2.2.3/2.0.3 versions of the driver, the status information
+available in /proc/rd/cN/initial_status and /proc/rd/cN/current_status has been
+augmented to include the vendor, model, revision, and serial number (if
+available) for each physical device found connected to the controller:
+
+***** DAC960 RAID Driver Version 2.2.3 of 19 August 1999 *****
+Copyright 1998-1999 by Leonard N. Zubkoff <lnz@dandelion.com>
+Configuring Mylex DAC960PRL PCI RAID Controller
+ Firmware Version: 4.07-0-07, Channels: 1, Memory Size: 16MB
+ PCI Bus: 1, Device: 4, Function: 1, I/O Address: Unassigned
+ PCI Address: 0xFE300000 mapped at 0xA0800000, IRQ Channel: 21
+ Controller Queue Depth: 128, Maximum Blocks per Command: 128
+ Driver Queue Depth: 127, Maximum Scatter/Gather Segments: 33
+ Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63
+ SAF-TE Enclosure Management Enabled
+ Physical Devices:
+ 0:0 Vendor: IBM Model: DRVS09D Revision: 0270
+ Serial Number: 68016775HA
+ Disk Status: Online, 17928192 blocks
+ 0:1 Vendor: IBM Model: DRVS09D Revision: 0270
+ Serial Number: 68004E53HA
+ Disk Status: Online, 17928192 blocks
+ 0:2 Vendor: IBM Model: DRVS09D Revision: 0270
+ Serial Number: 13013935HA
+ Disk Status: Online, 17928192 blocks
+ 0:3 Vendor: IBM Model: DRVS09D Revision: 0270
+ Serial Number: 13016897HA
+ Disk Status: Online, 17928192 blocks
+ 0:4 Vendor: IBM Model: DRVS09D Revision: 0270
+ Serial Number: 68019905HA
+ Disk Status: Online, 17928192 blocks
+ 0:5 Vendor: IBM Model: DRVS09D Revision: 0270
+ Serial Number: 68012753HA
+ Disk Status: Online, 17928192 blocks
+ 0:6 Vendor: ESG-SHV Model: SCA HSBP M6 Revision: 0.61
+ Logical Drives:
+ /dev/rd/c0d0: RAID-5, Online, 89640960 blocks, Write Thru
+ No Rebuild or Consistency Check in Progress
+
+To simplify the monitoring process for custom software, the special file
+/proc/rd/status returns "OK" when all DAC960 controllers in the system are
+operating normally and no failures have occurred, or "ALERT" if any logical
+drives are offline or critical or any non-standby physical drives are dead.
+
+Configuration commands for controller N are available via the special file
+/proc/rd/cN/user_command. A human readable command can be written to this
+special file to initiate a configuration operation, and the results of the
+operation can then be read back from the special file in addition to being
+logged to the system console. The shell command sequence
+
+ echo "<configuration-command>" > /proc/rd/c0/user_command
+ cat /proc/rd/c0/user_command
+
+is typically used to execute configuration commands. The configuration
+commands are:
+
+ flush-cache
+
+ The "flush-cache" command flushes the controller's cache. The system
+ automatically flushes the cache at shutdown or if the driver module is
+ unloaded, so this command is only needed to be certain a write back cache
+ is flushed to disk before the system is powered off by a command to a UPS.
+ Note that the flush-cache command also stops an asynchronous rebuild or
+ consistency check, so it should not be used except when the system is being
+ halted.
+
+ kill <channel>:<target-id>
+
+ The "kill" command marks the physical drive <channel>:<target-id> as DEAD.
+ This command is provided primarily for testing, and should not be used
+ during normal system operation.
+
+ make-online <channel>:<target-id>
+
+ The "make-online" command changes the physical drive <channel>:<target-id>
+ from status DEAD to status ONLINE. In cases where multiple physical drives
+ have been killed simultaneously, this command may be used to bring them
+ back online, after which a consistency check is advisable.
+
+ Warning: make-online should only be used on a dead physical drive that is
+ an active part of a drive group, never on a standby drive.
+
+ make-standby <channel>:<target-id>
+
+ The "make-standby" command changes physical drive <channel>:<target-id>
+ from status DEAD to status STANDBY. It should only be used in cases where
+ a dead drive was replaced after an automatic rebuild was performed onto a
+ standby drive. It cannot be used to add a standby drive to the controller
+ configuration if one was not created initially; the BIOS Configuration
+ Utility must be used for that currently.
+
+ rebuild <channel>:<target-id>
+
+ The "rebuild" command initiates an asynchronous rebuild onto physical drive
+ <channel>:<target-id>. It should only be used when a dead drive has been
+ replaced.
+
+ check-consistency <logical-drive-number>
+
+ The "check-consistency" command initiates an asynchronous consistency check
+ of <logical-drive-number> with automatic restoration. It can be used
+ whenever it is desired to verify the consistency of the redundancy
+ information.
+
+ cancel-rebuild
+ cancel-consistency-check
+
+ The "cancel-rebuild" and "cancel-consistency-check" commands cancel any
+ rebuild or consistency check operations previously initiated.
+
+
+ EXAMPLE I - DRIVE FAILURE WITHOUT A STANDBY DRIVE
+
+The following annotated logs demonstrate the controller configuration and and
+online status monitoring capabilities of the Linux DAC960 Driver. The test
+configuration comprises 6 1GB Quantum Atlas I disk drives on two channels of a
+DAC960PJ controller. The physical drives are configured into a single drive
+group without a standby drive, and the drive group has been configured into two
+logical drives, one RAID-5 and one RAID-6. Note that these logs are from an
+earlier version of the driver and the messages have changed somewhat with newer
+releases, but the functionality remains similar. First, here is the current
+status of the RAID configuration:
+
+gwynedd:/u/lnz# cat /proc/rd/c0/current_status
+***** DAC960 RAID Driver Version 2.0.0 of 23 March 1999 *****
+Copyright 1998-1999 by Leonard N. Zubkoff <lnz@dandelion.com>
+Configuring Mylex DAC960PJ PCI RAID Controller
+ Firmware Version: 4.06-0-08, Channels: 3, Memory Size: 8MB
+ PCI Bus: 0, Device: 19, Function: 1, I/O Address: Unassigned
+ PCI Address: 0xFD4FC000 mapped at 0x8807000, IRQ Channel: 9
+ Controller Queue Depth: 128, Maximum Blocks per Command: 128
+ Driver Queue Depth: 127, Maximum Scatter/Gather Segments: 33
+ Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63
+ Physical Devices:
+ 0:1 - Disk: Online, 2201600 blocks
+ 0:2 - Disk: Online, 2201600 blocks
+ 0:3 - Disk: Online, 2201600 blocks
+ 1:1 - Disk: Online, 2201600 blocks
+ 1:2 - Disk: Online, 2201600 blocks
+ 1:3 - Disk: Online, 2201600 blocks
+ Logical Drives:
+ /dev/rd/c0d0: RAID-5, Online, 5498880 blocks, Write Thru
+ /dev/rd/c0d1: RAID-6, Online, 3305472 blocks, Write Thru
+ No Rebuild or Consistency Check in Progress
+
+gwynedd:/u/lnz# cat /proc/rd/status
+OK
+
+The above messages indicate that everything is healthy, and /proc/rd/status
+returns "OK" indicating that there are no problems with any DAC960 controller
+in the system. For demonstration purposes, while I/O is active Physical Drive
+1:1 is now disconnected, simulating a drive failure. The failure is noted by
+the driver within 10 seconds of the controller's having detected it, and the
+driver logs the following console status messages indicating that Logical
+Drives 0 and 1 are now CRITICAL as a result of Physical Drive 1:1 being DEAD:
+
+DAC960#0: Physical Drive 1:2 Error Log: Sense Key = 6, ASC = 29, ASCQ = 02
+DAC960#0: Physical Drive 1:3 Error Log: Sense Key = 6, ASC = 29, ASCQ = 02
+DAC960#0: Physical Drive 1:1 killed because of timeout on SCSI command
+DAC960#0: Physical Drive 1:1 is now DEAD
+DAC960#0: Logical Drive 0 (/dev/rd/c0d0) is now CRITICAL
+DAC960#0: Logical Drive 1 (/dev/rd/c0d1) is now CRITICAL
+
+The Sense Keys logged here are just Check Condition / Unit Attention conditions
+arising from a SCSI bus reset that is forced by the controller during its error
+recovery procedures. Concurrently with the above, the driver status available
+from /proc/rd also reflects the drive failure. The status message in
+/proc/rd/status has changed from "OK" to "ALERT":
+
+gwynedd:/u/lnz# cat /proc/rd/status
+ALERT
+
+and /proc/rd/c0/current_status has been updated:
+
+gwynedd:/u/lnz# cat /proc/rd/c0/current_status
+ ...
+ Physical Devices:
+ 0:1 - Disk: Online, 2201600 blocks
+ 0:2 - Disk: Online, 2201600 blocks
+ 0:3 - Disk: Online, 2201600 blocks
+ 1:1 - Disk: Dead, 2201600 blocks
+ 1:2 - Disk: Online, 2201600 blocks
+ 1:3 - Disk: Online, 2201600 blocks
+ Logical Drives:
+ /dev/rd/c0d0: RAID-5, Critical, 5498880 blocks, Write Thru
+ /dev/rd/c0d1: RAID-6, Critical, 3305472 blocks, Write Thru
+ No Rebuild or Consistency Check in Progress
+
+Since there are no standby drives configured, the system can continue to access
+the logical drives in a performance degraded mode until the failed drive is
+replaced and a rebuild operation completed to restore the redundancy of the
+logical drives. Once Physical Drive 1:1 is replaced with a properly
+functioning drive, or if the physical drive was killed without having failed
+(e.g., due to electrical problems on the SCSI bus), the user can instruct the
+controller to initiate a rebuild operation onto the newly replaced drive:
+
+gwynedd:/u/lnz# echo "rebuild 1:1" > /proc/rd/c0/user_command
+gwynedd:/u/lnz# cat /proc/rd/c0/user_command
+Rebuild of Physical Drive 1:1 Initiated
+
+The echo command instructs the controller to initiate an asynchronous rebuild
+operation onto Physical Drive 1:1, and the status message that results from the
+operation is then available for reading from /proc/rd/c0/user_command, as well
+as being logged to the console by the driver.
+
+Within 10 seconds of this command the driver logs the initiation of the
+asynchronous rebuild operation:
+
+DAC960#0: Rebuild of Physical Drive 1:1 Initiated
+DAC960#0: Physical Drive 1:1 Error Log: Sense Key = 6, ASC = 29, ASCQ = 01
+DAC960#0: Physical Drive 1:1 is now WRITE-ONLY
+DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 1% completed
+
+and /proc/rd/c0/current_status is updated:
+
+gwynedd:/u/lnz# cat /proc/rd/c0/current_status
+ ...
+ Physical Devices:
+ 0:1 - Disk: Online, 2201600 blocks
+ 0:2 - Disk: Online, 2201600 blocks
+ 0:3 - Disk: Online, 2201600 blocks
+ 1:1 - Disk: Write-Only, 2201600 blocks
+ 1:2 - Disk: Online, 2201600 blocks
+ 1:3 - Disk: Online, 2201600 blocks
+ Logical Drives:
+ /dev/rd/c0d0: RAID-5, Critical, 5498880 blocks, Write Thru
+ /dev/rd/c0d1: RAID-6, Critical, 3305472 blocks, Write Thru
+ Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 6% completed
+
+As the rebuild progresses, the current status in /proc/rd/c0/current_status is
+updated every 10 seconds:
+
+gwynedd:/u/lnz# cat /proc/rd/c0/current_status
+ ...
+ Physical Devices:
+ 0:1 - Disk: Online, 2201600 blocks
+ 0:2 - Disk: Online, 2201600 blocks
+ 0:3 - Disk: Online, 2201600 blocks
+ 1:1 - Disk: Write-Only, 2201600 blocks
+ 1:2 - Disk: Online, 2201600 blocks
+ 1:3 - Disk: Online, 2201600 blocks
+ Logical Drives:
+ /dev/rd/c0d0: RAID-5, Critical, 5498880 blocks, Write Thru
+ /dev/rd/c0d1: RAID-6, Critical, 3305472 blocks, Write Thru
+ Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 15% completed
+
+and every minute a progress message is logged to the console by the driver:
+
+DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 32% completed
+DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 63% completed
+DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 94% completed
+DAC960#0: Rebuild in Progress: Logical Drive 1 (/dev/rd/c0d1) 94% completed
+
+Finally, the rebuild completes successfully. The driver logs the status of the
+logical and physical drives and the rebuild completion:
+
+DAC960#0: Rebuild Completed Successfully
+DAC960#0: Physical Drive 1:1 is now ONLINE
+DAC960#0: Logical Drive 0 (/dev/rd/c0d0) is now ONLINE
+DAC960#0: Logical Drive 1 (/dev/rd/c0d1) is now ONLINE
+
+/proc/rd/c0/current_status is updated:
+
+gwynedd:/u/lnz# cat /proc/rd/c0/current_status
+ ...
+ Physical Devices:
+ 0:1 - Disk: Online, 2201600 blocks
+ 0:2 - Disk: Online, 2201600 blocks
+ 0:3 - Disk: Online, 2201600 blocks
+ 1:1 - Disk: Online, 2201600 blocks
+ 1:2 - Disk: Online, 2201600 blocks
+ 1:3 - Disk: Online, 2201600 blocks
+ Logical Drives:
+ /dev/rd/c0d0: RAID-5, Online, 5498880 blocks, Write Thru
+ /dev/rd/c0d1: RAID-6, Online, 3305472 blocks, Write Thru
+ Rebuild Completed Successfully
+
+and /proc/rd/status indicates that everything is healthy once again:
+
+gwynedd:/u/lnz# cat /proc/rd/status
+OK
+
+
+ EXAMPLE II - DRIVE FAILURE WITH A STANDBY DRIVE
+
+The following annotated logs demonstrate the controller configuration and and
+online status monitoring capabilities of the Linux DAC960 Driver. The test
+configuration comprises 6 1GB Quantum Atlas I disk drives on two channels of a
+DAC960PJ controller. The physical drives are configured into a single drive
+group with a standby drive, and the drive group has been configured into two
+logical drives, one RAID-5 and one RAID-6. Note that these logs are from an
+earlier version of the driver and the messages have changed somewhat with newer
+releases, but the functionality remains similar. First, here is the current
+status of the RAID configuration:
+
+gwynedd:/u/lnz# cat /proc/rd/c0/current_status
+***** DAC960 RAID Driver Version 2.0.0 of 23 March 1999 *****
+Copyright 1998-1999 by Leonard N. Zubkoff <lnz@dandelion.com>
+Configuring Mylex DAC960PJ PCI RAID Controller
+ Firmware Version: 4.06-0-08, Channels: 3, Memory Size: 8MB
+ PCI Bus: 0, Device: 19, Function: 1, I/O Address: Unassigned
+ PCI Address: 0xFD4FC000 mapped at 0x8807000, IRQ Channel: 9
+ Controller Queue Depth: 128, Maximum Blocks per Command: 128
+ Driver Queue Depth: 127, Maximum Scatter/Gather Segments: 33
+ Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63
+ Physical Devices:
+ 0:1 - Disk: Online, 2201600 blocks
+ 0:2 - Disk: Online, 2201600 blocks
+ 0:3 - Disk: Online, 2201600 blocks
+ 1:1 - Disk: Online, 2201600 blocks
+ 1:2 - Disk: Online, 2201600 blocks
+ 1:3 - Disk: Standby, 2201600 blocks
+ Logical Drives:
+ /dev/rd/c0d0: RAID-5, Online, 4399104 blocks, Write Thru
+ /dev/rd/c0d1: RAID-6, Online, 2754560 blocks, Write Thru
+ No Rebuild or Consistency Check in Progress
+
+gwynedd:/u/lnz# cat /proc/rd/status
+OK
+
+The above messages indicate that everything is healthy, and /proc/rd/status
+returns "OK" indicating that there are no problems with any DAC960 controller
+in the system. For demonstration purposes, while I/O is active Physical Drive
+1:2 is now disconnected, simulating a drive failure. The failure is noted by
+the driver within 10 seconds of the controller's having detected it, and the
+driver logs the following console status messages:
+
+DAC960#0: Physical Drive 1:1 Error Log: Sense Key = 6, ASC = 29, ASCQ = 02
+DAC960#0: Physical Drive 1:3 Error Log: Sense Key = 6, ASC = 29, ASCQ = 02
+DAC960#0: Physical Drive 1:2 killed because of timeout on SCSI command
+DAC960#0: Physical Drive 1:2 is now DEAD
+DAC960#0: Physical Drive 1:2 killed because it was removed
+DAC960#0: Logical Drive 0 (/dev/rd/c0d0) is now CRITICAL
+DAC960#0: Logical Drive 1 (/dev/rd/c0d1) is now CRITICAL
+
+Since a standby drive is configured, the controller automatically begins
+rebuilding onto the standby drive:
+
+DAC960#0: Physical Drive 1:3 is now WRITE-ONLY
+DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 4% completed
+
+Concurrently with the above, the driver status available from /proc/rd also
+reflects the drive failure and automatic rebuild. The status message in
+/proc/rd/status has changed from "OK" to "ALERT":
+
+gwynedd:/u/lnz# cat /proc/rd/status
+ALERT
+
+and /proc/rd/c0/current_status has been updated:
+
+gwynedd:/u/lnz# cat /proc/rd/c0/current_status
+ ...
+ Physical Devices:
+ 0:1 - Disk: Online, 2201600 blocks
+ 0:2 - Disk: Online, 2201600 blocks
+ 0:3 - Disk: Online, 2201600 blocks
+ 1:1 - Disk: Online, 2201600 blocks
+ 1:2 - Disk: Dead, 2201600 blocks
+ 1:3 - Disk: Write-Only, 2201600 blocks
+ Logical Drives:
+ /dev/rd/c0d0: RAID-5, Critical, 4399104 blocks, Write Thru
+ /dev/rd/c0d1: RAID-6, Critical, 2754560 blocks, Write Thru
+ Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 4% completed
+
+As the rebuild progresses, the current status in /proc/rd/c0/current_status is
+updated every 10 seconds:
+
+gwynedd:/u/lnz# cat /proc/rd/c0/current_status
+ ...
+ Physical Devices:
+ 0:1 - Disk: Online, 2201600 blocks
+ 0:2 - Disk: Online, 2201600 blocks
+ 0:3 - Disk: Online, 2201600 blocks
+ 1:1 - Disk: Online, 2201600 blocks
+ 1:2 - Disk: Dead, 2201600 blocks
+ 1:3 - Disk: Write-Only, 2201600 blocks
+ Logical Drives:
+ /dev/rd/c0d0: RAID-5, Critical, 4399104 blocks, Write Thru
+ /dev/rd/c0d1: RAID-6, Critical, 2754560 blocks, Write Thru
+ Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 40% completed
+
+and every minute a progress message is logged on the console by the driver:
+
+DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 40% completed
+DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 76% completed
+DAC960#0: Rebuild in Progress: Logical Drive 1 (/dev/rd/c0d1) 66% completed
+DAC960#0: Rebuild in Progress: Logical Drive 1 (/dev/rd/c0d1) 84% completed
+
+Finally, the rebuild completes successfully. The driver logs the status of the
+logical and physical drives and the rebuild completion:
+
+DAC960#0: Rebuild Completed Successfully
+DAC960#0: Physical Drive 1:3 is now ONLINE
+DAC960#0: Logical Drive 0 (/dev/rd/c0d0) is now ONLINE
+DAC960#0: Logical Drive 1 (/dev/rd/c0d1) is now ONLINE
+
+/proc/rd/c0/current_status is updated:
+
+***** DAC960 RAID Driver Version 2.0.0 of 23 March 1999 *****
+Copyright 1998-1999 by Leonard N. Zubkoff <lnz@dandelion.com>
+Configuring Mylex DAC960PJ PCI RAID Controller
+ Firmware Version: 4.06-0-08, Channels: 3, Memory Size: 8MB
+ PCI Bus: 0, Device: 19, Function: 1, I/O Address: Unassigned
+ PCI Address: 0xFD4FC000 mapped at 0x8807000, IRQ Channel: 9
+ Controller Queue Depth: 128, Maximum Blocks per Command: 128
+ Driver Queue Depth: 127, Maximum Scatter/Gather Segments: 33
+ Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63
+ Physical Devices:
+ 0:1 - Disk: Online, 2201600 blocks
+ 0:2 - Disk: Online, 2201600 blocks
+ 0:3 - Disk: Online, 2201600 blocks
+ 1:1 - Disk: Online, 2201600 blocks
+ 1:2 - Disk: Dead, 2201600 blocks
+ 1:3 - Disk: Online, 2201600 blocks
+ Logical Drives:
+ /dev/rd/c0d0: RAID-5, Online, 4399104 blocks, Write Thru
+ /dev/rd/c0d1: RAID-6, Online, 2754560 blocks, Write Thru
+ Rebuild Completed Successfully
+
+and /proc/rd/status indicates that everything is healthy once again:
+
+gwynedd:/u/lnz# cat /proc/rd/status
+OK
+
+Note that the absence of a viable standby drive does not create an "ALERT"
+status. Once dead Physical Drive 1:2 has been replaced, the controller must be
+told that this has occurred and that the newly replaced drive should become the
+new standby drive:
+
+gwynedd:/u/lnz# echo "make-standby 1:2" > /proc/rd/c0/user_command
+gwynedd:/u/lnz# cat /proc/rd/c0/user_command
+Make Standby of Physical Drive 1:2 Succeeded
+
+The echo command instructs the controller to make Physical Drive 1:2 into a
+standby drive, and the status message that results from the operation is then
+available for reading from /proc/rd/c0/user_command, as well as being logged to
+the console by the driver. Within 60 seconds of this command the driver logs:
+
+DAC960#0: Physical Drive 1:2 Error Log: Sense Key = 6, ASC = 29, ASCQ = 01
+DAC960#0: Physical Drive 1:2 is now STANDBY
+DAC960#0: Make Standby of Physical Drive 1:2 Succeeded
+
+and /proc/rd/c0/current_status is updated:
+
+gwynedd:/u/lnz# cat /proc/rd/c0/current_status
+ ...
+ Physical Devices:
+ 0:1 - Disk: Online, 2201600 blocks
+ 0:2 - Disk: Online, 2201600 blocks
+ 0:3 - Disk: Online, 2201600 blocks
+ 1:1 - Disk: Online, 2201600 blocks
+ 1:2 - Disk: Standby, 2201600 blocks
+ 1:3 - Disk: Online, 2201600 blocks
+ Logical Drives:
+ /dev/rd/c0d0: RAID-5, Online, 4399104 blocks, Write Thru
+ /dev/rd/c0d1: RAID-6, Online, 2754560 blocks, Write Thru
+ Rebuild Completed Successfully