More Atlas chainsawing.

12 files changed, 413 insertions, 270 deletions

diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 29694a0d9..14801d3cb 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -103,13 +103,13 @@ LOADADDR      += 0x80040000
 endif
 
 ifdef CONFIG_MIPS_ATLAS
-LIBS          += arch/mips/mips-boards/atlas/atlas.a arch/mips/mips-boards/generic/mipsboards.a
+LIBS          += arch/mips/mips-boards/atlas/atlas.o arch/mips/mips-boards/generic/mipsboards.o
 SUBDIRS       += arch/mips/mips-boards/generic arch/mips/mips-boards/atlas
 LOADADDR      += 0x80100000
 endif
 
 ifdef CONFIG_MIPS_MALTA
-LIBS          += arch/mips/mips-boards/malta/malta.a arch/mips/mips-boards/generic/mipsboards.a
+LIBS          += arch/mips/mips-boards/malta/malta.o arch/mips/mips-boards/generic/mipsboards.o
 SUBDIRS       += arch/mips/mips-boards/malta arch/mips/mips-boards/generic
 LOADADDR      += 0x80100000
 endif
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index d140184a6..97eaa62b3 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -32,15 +32,16 @@ ifdef CONFIG_MIPS_FPE_MODULE
 M_OBJS += fpe.o
 endif
 
-#
-# SGIs have very different interrupt/timer hardware.
-#
 ifndef CONFIG_DECSTATION
   ifndef CONFIG_BAGET_MIPS
-    O_OBJS += time.o
     ifndef CONFIG_SGI_IP22
       ifndef CONFIG_ORION
-        OX_OBJS += irq.o
+        ifndef CONFIG_MIPS_ATLAS
+	  ifndef CONFIG_MIPS_MALTA
+	    O_OBJS += time.o
+	    OX_OBJS += irq.o
+	  endif
+        endif
       endif
     endif
   endif
diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c
index 62739e4a6..b662631fe 100644
--- a/arch/mips/kernel/time.c
+++ b/arch/mips/kernel/time.c
@@ -97,7 +97,6 @@ static unsigned long do_fast_gettimeoffset(void)
 
 	/* .. relative to previous jiffy (32 bits is enough) */
 	count -= timerlo;
-//printk("count: %08lx, %08lx:%08lx\n", count, timerhi, timerlo);
 
 	__asm__("multu\t%1,%2\n\t"
 		"mfhi\t%0"
diff --git a/arch/mips/mips-boards/atlas/Makefile b/arch/mips/mips-boards/atlas/Makefile
index 822946539..4771fb317 100644
--- a/arch/mips/mips-boards/atlas/Makefile
+++ b/arch/mips/mips-boards/atlas/Makefile
@@ -1,6 +1,3 @@
-# $Id: Makefile,v 1.1 2000/07/07 10:20:28 carstenl Exp $
-#
-# Makefile
 #
 # Carsten Langgaard, carstenl@mips.com
 # Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
@@ -36,13 +33,11 @@
 .S.o:
 	$(CC) $(CFLAGS) -c $< -o $*.o
 
-OBJS  = atlas_int.o atlas_rtc.o atlas_setup.o
+all: atlas.o
 
-all: atlas.a
+O_TARGET := atlas.o
 
-atlas.a: $(OBJS)
-	$(AR) rcs atlas.a $(OBJS)
-	sync
+O_OBJS := atlas_int.o atlas_rtc.o atlas_setup.o
 
 dep:
 	$(CPP) -M *.c > .depend
diff --git a/arch/mips/mips-boards/atlas/atlas_int.c b/arch/mips/mips-boards/atlas/atlas_int.c
index ff4e31d07..843ad2459 100644
--- a/arch/mips/mips-boards/atlas/atlas_int.c
+++ b/arch/mips/mips-boards/atlas/atlas_int.c
@@ -215,10 +215,10 @@ void atlas_hw0_irqdispatch(struct pt_regs *regs)
 
 	/* if int_status == 0, then the interrupt has already been cleared */
 	if (int_status == 0)
-	        return;
+		return;
 
 	for (i=0; i<ATLASINT_END; i++)
-	        if (int_status & 1<<i)
+		if (int_status & 1<<i)
 			break;
 	
 	irq = i;
@@ -227,15 +227,15 @@ void atlas_hw0_irqdispatch(struct pt_regs *regs)
 	DEBUG_INT("atlas_hw0_irqdispatch: irq=%d\n", irq);
 
 	/* if action == NULL, then we don't have a handler for the irq */
-	if ( action == NULL ) {
+	if (action == NULL) {
 	        printk("No handler for hw0 irq: %i\n", irq);
 		return;
 	}
 
-	hardirq_enter(cpu);
+	irq_enter(cpu);
 	kstat.irqs[0][irq + 8]++;
 	action->handler(irq, action->dev_id, regs);
-	hardirq_exit(cpu);
+	irq_exit(cpu);
 
 	return;		
 }
diff --git a/arch/mips/mips-boards/atlas/atlas_setup.c b/arch/mips/mips-boards/atlas/atlas_setup.c
index 948fac6a9..c39473658 100644
--- a/arch/mips/mips-boards/atlas/atlas_setup.c
+++ b/arch/mips/mips-boards/atlas/atlas_setup.c
@@ -53,7 +53,7 @@ extern void mips_reboot_setup(void);
 
 static void __init atlas_irq_setup(void)
 {
-  	atlasint_init();
+	atlasint_init();
 
 #ifdef CONFIG_REMOTE_DEBUG
 	/* If local serial I/O used for debug port, enter kgdb at once */
@@ -81,17 +81,16 @@ void __init atlas_setup(void)
 	irq_setup = atlas_irq_setup;
 
 #ifdef CONFIG_SERIAL_CONSOLE
-        argptr = prom_getcmdline();
-	if ((argptr = strstr(argptr, "console=ttyS0")) == NULL) 
-	{
-	        int i=0;
-	        char *s = prom_getenv("modetty0");
+	argptr = prom_getcmdline();
+	if ((argptr = strstr(argptr, "console=ttyS0")) == NULL) {
+		int i = 0;
+		char *s = prom_getenv("modetty0");
 		while(s[i] >= '0' && s[i] <= '9')
 			i++;
 		strcpy(serial_console, "ttyS0,");
 		strncpy(serial_console + 6, s, i);
 		prom_printf("Config serial console: %s\n", serial_console);
-	        console_setup(serial_console, NULL);
+		console_setup(serial_console, NULL);
 	}
 #endif	  
 
diff --git a/arch/mips/mips-boards/generic/Makefile b/arch/mips/mips-boards/generic/Makefile
index 377190c96..c76f6fd46 100644
--- a/arch/mips/mips-boards/generic/Makefile
+++ b/arch/mips/mips-boards/generic/Makefile
@@ -1,6 +1,3 @@
-# $Id: Makefile,v 1.1 2000/07/07 10:21:35 carstenl Exp $
-#
-# Makefile
 #
 # Carsten Langgaard, carstenl@mips.com
 # Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
@@ -35,15 +32,11 @@
 .S.o:
 	$(CC) $(CFLAGS) -c $< -o $*.o
 
-OBJS  = mipsIRQ.o pci.o reset.o display.o init.o memory.o printf.o cmdline.o time.o
-
-all: mipsboards.a
+all: mipsboards.o
 
-mipsboards.a: $(OBJS)
-	$(AR) rcs mipsboards.a $(OBJS)
-	sync
+O_TARGET := mipsboards.o
 
-dep:
-	$(CPP) -M *.c > .depend
+O_OBJS := mipsIRQ.o pci.o reset.o display.o init.o memory.o printf.o \
+	  cmdline.o time.o
 
 include $(TOPDIR)/Rules.make
diff --git a/arch/mips/mips-boards/generic/memory.c b/arch/mips/mips-boards/generic/memory.c
index b8e442f70..c352ab790 100644
--- a/arch/mips/mips-boards/generic/memory.c
+++ b/arch/mips/mips-boards/generic/memory.c
@@ -26,6 +26,7 @@
 #include <linux/config.h>
 #include <linux/init.h>
 #include <linux/mm.h>
+#include <linux/bootmem.h>
 
 #include <asm/bootinfo.h>
 #include <asm/page.h>
@@ -37,7 +38,7 @@
 enum yamon_memtypes {
 	yamon_dontuse,
 	yamon_prom,
-        yamon_free,
+	yamon_free,
 };
 struct prom_pmemblock mdesc[PROM_MAX_PMEMBLOCKS];
 
@@ -47,7 +48,7 @@ struct prom_pmemblock mdesc[PROM_MAX_PMEMBLOCKS];
 
 #ifdef DEBUG
 static char *mtypes[3] = {
-        "Dont use memory",
+	"Dont use memory",
 	"YAMON PROM memory",
 	"Free memmory",
 };
@@ -55,30 +56,28 @@ static char *mtypes[3] = {
 
 struct prom_pmemblock * __init prom_getmdesc(void)
 {
-        char *memsize_str;
+	char *memsize_str;
 	unsigned int memsize;
-	
+
 	memsize_str = prom_getenv("memsize");
 	if (!memsize_str) {
-	        prom_printf("memsize not set in boot prom, set to default (32Mb)\n");
+		prom_printf("memsize not set in boot prom, set to default (32Mb)\n");
 		memsize = 0x02000000;
-	} 
-	else 
-	{
+	} else {
 #ifdef DEBUG
-	        prom_printf("prom_memsize = %s\n", memsize_str);
+		prom_printf("prom_memsize = %s\n", memsize_str);
 #endif
-	        memsize = simple_strtol(memsize_str, NULL, 0);
+		memsize = simple_strtol(memsize_str, NULL, 0);
 	}
 
-        memset(mdesc, 0, sizeof(mdesc));
+	memset(mdesc, 0, sizeof(mdesc));
 
 	mdesc[0].type = yamon_dontuse;
-        mdesc[0].base = 0x00000000;
+	mdesc[0].base = 0x00000000;
 	mdesc[0].size = 0x00001000;
 
 	mdesc[1].type = yamon_prom;
-        mdesc[1].base = 0x00001000;
+	mdesc[1].base = 0x00001000;
 	mdesc[1].size = 0x000ef000;
 
 #if (CONFIG_MIPS_MALTA)
@@ -90,157 +89,167 @@ struct prom_pmemblock * __init prom_getmdesc(void)
 	 * devices.
 	 */
 	mdesc[2].type = yamon_dontuse;
-        mdesc[2].base = 0x000f0000;
+	mdesc[2].base = 0x000f0000;
 	mdesc[2].size = 0x00010000;
 #else
 	mdesc[2].type = yamon_prom;
-        mdesc[2].base = 0x000f0000;
+	mdesc[2].base = 0x000f0000;
 	mdesc[2].size = 0x00010000;
 #endif
-
 	mdesc[3].type = yamon_free;
         mdesc[3].base = 0x00100000;
 	mdesc[3].size = memsize - mdesc[3].base;
 
-        return &mdesc[0];
+	return &mdesc[0];
 }
 
-static struct prom_pmemblock prom_pblocks[PROM_MAX_PMEMBLOCKS];
-
-struct prom_pmemblock * __init prom_getpblock_array(void)
+int __init page_is_ram(unsigned long pagenr)
 {
-	return &prom_pblocks[0];
+	if ((pagenr << PAGE_SHIFT) < mdesc[3].base + mdesc[3].size)
+		return 1;
+
+	return 0;
 }
 
+static struct prom_pmemblock pblocks[PROM_MAX_PMEMBLOCKS];
+
 static int __init prom_memtype_classify (unsigned int type)
 {
-        switch (type) {
-	  case yamon_free:
-	    return MEMTYPE_FREE;
-	  case yamon_prom:
-	    return MEMTYPE_PROM;
-	  default:
-	    return MEMTYPE_DONTUSE;
+	switch (type) {
+	case yamon_free:
+		return MEMTYPE_FREE;
+	case yamon_prom:
+		return MEMTYPE_PROM;
+	default:
+		return MEMTYPE_DONTUSE;
 	}
 }
 
-static void __init prom_setup_memupper(void)
+static inline unsigned long find_max_low_pfn(void)
 {
 	struct prom_pmemblock *p, *highest;
+	unsigned long pfn;
 
-	for(p = prom_getpblock_array(), highest = 0; p->size != 0; p++) {
-		if(p->base == 0xdeadbeef)
-			prom_printf("WHEEE, bogus pmemblock\n");
-		if(!highest || p->base > highest->base)
+	p = pblocks;
+	highest = 0;
+	while (p->size != 0) {
+		if (!highest || p->base > highest->base)
 			highest = p;
-	}
-	mips_memory_upper = highest->base + highest->size;
+		p++;
+        }
+
+	pfn = (highest->base + highest->size) >> PAGE_SHIFT;
 #ifdef DEBUG
-	prom_printf("prom_setup_memupper: mips_memory_upper = %08lx\n",
-		    mips_memory_upper);
+	prom_printf("find_max_low_pfn: 0x%lx pfns.\n", pfn);
 #endif
+	return pfn;
+}
+
+static inline struct prom_pmemblock *find_largest_memblock(void)
+{
+	struct prom_pmemblock *p, *largest;
+
+	p = pblocks;
+	largest = 0;
+	while (p->size != 0) {
+		if (!largest || p->size > largest->size)
+			largest = p;
+		p++;
+	}
+
+	return largest;
 }
 
 void __init prom_meminit(void)
 {
-	struct prom_pmemblock *p;
+	struct prom_pmemblock *largest, *p;
+	unsigned long bootmap_size;
 	int totram;
 	int i = 0;
 
 #ifdef DEBUG
-	p = prom_getmdesc();
 	prom_printf("YAMON MEMORY DESCRIPTOR dump:\n");
-	while(p->size) {
+	p = prom_getmdesc();
+	while (p->size) {
 		prom_printf("[%d,%p]: base<%08lx> size<%08lx> type<%s>\n",
 			    i, p, p->base, p->size, memtypes[p->type]);
 		p++;
 		i++;
 	}
 #endif
-	p = prom_getmdesc();
 	totram = 0;
 	i = 0;
-	while(p->size) {
-	    prom_pblocks[i].type = prom_memtype_classify (p->type);
-	    prom_pblocks[i].base = p->base | 0x80000000;
-	    prom_pblocks[i].size = p->size;
-	    switch (prom_pblocks[i].type) {
-	     case MEMTYPE_FREE:
-		totram += prom_pblocks[i].size;
+	p = prom_getmdesc();
+	while (p->size) {
+		pblocks[i].type = prom_memtype_classify (p->type);
+		pblocks[i].base = p->base | 0x80000000;
+		pblocks[i].size = p->size;
+		switch (pblocks[i].type) {
+		case MEMTYPE_FREE:
+			totram += pblocks[i].size;
 #ifdef DEBUG
-		prom_printf("free_chunk[%d]: base=%08lx size=%d\n",
-			    i, prom_pblocks[i].base,
-			    prom_pblocks[i].size);
+			prom_printf("free_chunk[%d]: base=%08lx size=%d\n",
+				    i, pblocks[i].base,
+				    pblocks[i].size);
 #endif
-		i++;
-		break;
-	     case MEMTYPE_PROM:
+			i++;
+			break;
+		case MEMTYPE_PROM:
 #ifdef DEBUG
-		prom_printf("prom_chunk[%d]: base=%08lx size=%d\n",
-			    i, prom_pblocks[i].base,
-			    prom_pblocks[i].size);
+			prom_printf("prom_chunk[%d]: base=%08lx size=%d\n",
+				    i, pblocks[i].base,
+				    pblocks[i].size);
 #endif
-		i++;
-		break;
-	     default:
-		break;
-	    }
-	    p++;
+			i++;
+			break;
+		default:
+			break;
+		}
+		p++;
+	}
+	pblocks[i].base = 0xdeadbeef;
+	pblocks[i].size = 0; /* indicates last elem. of array */
+
+	max_low_pfn = find_max_low_pfn();
+	largest = find_largest_memblock();
+	bootmap_size = init_bootmem(largest->base >> PAGE_SHIFT, max_low_pfn);
+
+	for (i = 0; pblocks[i].size; i++)
+		if (pblocks[i].type == MEMTYPE_FREE)
+			free_bootmem(pblocks[i].base, pblocks[i].size);
+
+	/* This test is simpleminded.  It will fail if the bootmem bitmap
+	   falls into multiple adjacent PROM memory areas.  */
+	if (bootmap_size > largest->size) {
+		prom_printf("CRITIAL: overwriting PROM data.\n");
+		BUG();
 	}
-	prom_pblocks[i].base = 0xdeadbeef;
-	prom_pblocks[i].size = 0; /* indicates last elem. of array */
-	printk("PROMLIB: Total free ram %d bytes (%dK,%dMB)\n",
-		    totram, (totram/1024), (totram/1024/1024));
 
-	/* Setup upper physical memory bound. */
-	prom_setup_memupper();
-}
+	/* Reserve the memory bootmap itself */
+	reserve_bootmem(largest->base, bootmap_size);
 
-/* Called from mem_init() to fixup the mem_map page settings. */
-void __init prom_fixup_mem_map(unsigned long start, unsigned long end)
-{
-	struct prom_pmemblock *p;
-	int i, nents;
-
-	/* Determine number of pblockarray entries. */
-	p = prom_getpblock_array();
-	for(i = 0; p[i].size; i++)
-		;
-	nents = i;
-restart:
-	while(start < end) {
-		for(i = 0; i < nents; i++) {
-			if((p[i].type == MEMTYPE_FREE) &&
-			   (start >= (p[i].base)) &&
-			   (start < (p[i].base + p[i].size))) {
-				start = p[i].base + p[i].size;
-				start &= PAGE_MASK;
-				goto restart;
-			}
-		}
-		set_bit(PG_reserved, &mem_map[MAP_NR(start)].flags);
-		start += PAGE_SIZE;
-	}
+	printk("PROMLIB: Total free ram %d bytes (%dK,%dMB)\n",
+		    totram, (totram/1024), (totram/1024/1024));
 }
 
 void prom_free_prom_memory (void)
 {
 	struct prom_pmemblock *p;
+	unsigned long freed = 0;
 	unsigned long addr;
-	unsigned long num_pages = 0;
 
-	for (p = prom_getpblock_array(); p->size != 0; p++) {
+	for (p = pblocks; p->size != 0; p++) {
 		if (p->type != MEMTYPE_PROM)
 			continue;
 
-		for (addr = p->base; addr < p->base + p->size;
-		     addr += PAGE_SIZE) {
-			mem_map[MAP_NR(addr)].flags &= ~(1 << PG_reserved);
-			atomic_set(&mem_map[MAP_NR(addr)].count, 1);
+		addr = p->base;
+		while (addr < p->base + p->size) {
+			ClearPageReserved(virt_to_page(addr));
+			set_page_count(virt_to_page(addr), 1);
 			free_page(addr);
-			num_pages++;
+			addr += PAGE_SIZE;
+			freed++;
 		}
 	}
-	printk("Freeing prom memory: %ldk freed\n",
-	       (num_pages << (PAGE_SHIFT - 10)));
+	printk("Freeing prom memory: %ldkk freed\n", freed >> 10);
 }
diff --git a/arch/mips/mips-boards/generic/mipsIRQ.S b/arch/mips/mips-boards/generic/mipsIRQ.S
index 110f67fad..c2b9d891f 100644
--- a/arch/mips/mips-boards/generic/mipsIRQ.S
+++ b/arch/mips/mips-boards/generic/mipsIRQ.S
@@ -1,9 +1,6 @@
-/* $Id: mipsIRQ.S,v 1.2 2000/08/25 06:53:54 carstenl Exp $
- *
- * mipsIRQ.S
- *
+/*
  * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+ * Copyright (C) 1999, 2000 MIPS Technologies, Inc.  All rights reserved.
  *
  * ########################################################################
  *
@@ -25,51 +22,48 @@
  * Interrupt exception dispatch code.
  *
  */
-
 #include <linux/config.h>
-	
+
 #include <asm/asm.h>
 #include <asm/mipsregs.h>
 #include <asm/regdef.h>
 #include <asm/stackframe.h>
 
-	/* A lot of complication here is taken away because:
-	 *
-	 * 1) We handle one interrupt and return, sitting in a loop
-	 *    and moving across all the pending IRQ bits in the cause
-	 *    register is _NOT_ the answer, the common case is one
-	 *    pending IRQ so optimize in that direction.
-	 *
-	 * 2) We need not check against bits in the status register
-	 *    IRQ mask, that would make this routine slow as hell.
-	 *
-	 * 3) Linux only thinks in terms of all IRQs on or all IRQs
-	 *    off, nothing in between like BSD spl() brain-damage.
-	 *
-	 * Furthermore, the IRQs on the MIPS board look basically (barring
-	 * software IRQs which we don't use at all and all external interrupt
-	 * sources are combined together on hardware interrupt 0 (MIPS 
-	 * IRQ 2)) like:
-	 *
-	 *	MIPS IRQ	Source
-	 *      --------        ------
-	 *             0	Software (ignored)
-	 *             1        Software (ignored)
-	 *             2        Combined hardware interrupt (hw0)
-	 *             3        Hardware (ignored)
-	 *             4        Hardware (ignored)
-	 *             5        Hardware (ignored)
-	 *             6        Hardware (ignored)
-	 *             7        R4k timer (what we use)
-	 *
-	 * We handle the IRQ according to _our_ priority which is:
-	 *
-	 * Highest ----     R4k Timer
-	 * Lowest  ----     Combined hardware interrupt
-	 *
-	 * then we just return, if multiple IRQs are pending then
-	 * we will just take another exception, big deal.
-	 */
+/* A lot of complication here is taken away because:
+ *
+ * 1) We handle one interrupt and return, sitting in a loop and moving across
+ *    all the pending IRQ bits in the cause register is _NOT_ the answer, the
+ *    common case is one pending IRQ so optimize in that direction.
+ *
+ * 2) We need not check against bits in the status register IRQ mask, that
+ *    would make this routine slow as hell.
+ *
+ * 3) Linux only thinks in terms of all IRQs on or all IRQs off, nothing in
+ *    between like BSD spl() brain-damage.
+ *
+ * Furthermore, the IRQs on the MIPS board look basically (barring software
+ * IRQs which we don't use at all and all external interrupt sources are
+ * combined together on hardware interrupt 0 (MIPS IRQ 2)) like:
+ *
+ *	MIPS IRQ	Source
+ *      --------        ------
+ *             0	Software (ignored)
+ *             1        Software (ignored)
+ *             2        Combined hardware interrupt (hw0)
+ *             3        Hardware (ignored)
+ *             4        Hardware (ignored)
+ *             5        Hardware (ignored)
+ *             6        Hardware (ignored)
+ *             7        R4k timer (what we use)
+ *
+ * We handle the IRQ according to _our_ priority which is:
+ *
+ * Highest ----     R4k Timer
+ * Lowest  ----     Combined hardware interrupt
+ *
+ * then we just return, if multiple IRQs are pending then we will just take
+ * another exception, big deal.
+ */
 
 	.text
 	.set	noreorder
@@ -90,10 +84,10 @@
 	/* Wheee, a timer interrupt. */
 	move	a0, sp
 	jal	mips_timer_interrupt
-	 nop				# delay slot
+	 nop
 
 	j	ret_from_irq
-	 nop				# delay slot
+	 nop
 
 1:
 	beq	a0, zero, 1f
@@ -113,15 +107,16 @@
 	 nop				# delay slot
 
 1:
-	/* Here by mistake?  This is possible, what can happen
-	 * is that by the time we take the exception the IRQ
-	 * pin goes low, so just leave if this is the case.
+	/*
+	 * Here by mistake?  This is possible, what can happen is that by the
+	 * time we take the exception the IRQ pin goes low, so just leave if
+	 * this is the case.
 	 */
 	move	a1,s0
 	PRINT("Got interrupt: c0_cause = %08x\n")
 	mfc0	a1, CP0_EPC
 	PRINT("c0_epc = %08x\n")
-		
+
 	j	ret_from_irq
 	 nop
 	END(mipsIRQ)
diff --git a/arch/mips/mips-boards/generic/pci.c b/arch/mips/mips-boards/generic/pci.c
index 0909ca2ae..4ee5a2b9b 100644
--- a/arch/mips/mips-boards/generic/pci.c
+++ b/arch/mips/mips-boards/generic/pci.c
@@ -52,15 +52,15 @@ mips_pcibios_config_access(unsigned char access_type, struct pci_dev *dev,
 	        return -1; /* Because of a bug in the galileo (for slot 31). */
 
 	/* Clear cause register bits */
-	GT_WRITE( GT_INTRCAUSE_OFS, ~(GT_INTRCAUSE_MASABORT0_BIT | 
-				      GT_INTRCAUSE_TARABORT0_BIT) );
+	GT_WRITE(GT_INTRCAUSE_OFS, ~(GT_INTRCAUSE_MASABORT0_BIT | 
+	                             GT_INTRCAUSE_TARABORT0_BIT));
 
 	/* Setup address */
-	GT_WRITE( GT_PCI0_CFGADDR_OFS, 
-		  (bus         << GT_PCI0_CFGADDR_BUSNUM_SHF) |
-		  (dev_fn      << GT_PCI0_CFGADDR_FUNCTNUM_SHF) |
-		  ((where / 4) << GT_PCI0_CFGADDR_REGNUM_SHF)   |
-		  GT_PCI0_CFGADDR_CONFIGEN_BIT );
+	GT_WRITE(GT_PCI0_CFGADDR_OFS, 
+		 (bus         << GT_PCI0_CFGADDR_BUSNUM_SHF)   |
+		 (dev_fn      << GT_PCI0_CFGADDR_FUNCTNUM_SHF) |
+		 ((where / 4) << GT_PCI0_CFGADDR_REGNUM_SHF)   |
+		 GT_PCI0_CFGADDR_CONFIGEN_BIT);
 
 	if (access_type == PCI_ACCESS_WRITE) {
 		GT_WRITE(GT_PCI0_CFGDATA_OFS, *data);
@@ -268,4 +268,51 @@ void __init pcibios_init(void)
 #endif
 }
 
+int __init
+pcibios_enable_device(struct pci_dev *dev)
+{
+	/* Not needed, since we enable all devices at startup.  */
+	return 0;
+}
+
+void __init
+pcibios_align_resource(void *data, struct resource *res, unsigned long size)
+{
+}
+
+char * __init
+pcibios_setup(char *str)
+{
+	/* Nothing to do for now.  */
+
+	return str;
+}
+
+struct pci_fixup pcibios_fixups[] = {
+	{ 0 }
+};
+
+void __init
+pcibios_update_resource(struct pci_dev *dev, struct resource *root,
+                        struct resource *res, int resource)
+{
+	unsigned long where, size;
+	u32 reg;
+
+	where = PCI_BASE_ADDRESS_0 + (resource * 4);
+	size = res->end - res->start;
+	pci_read_config_dword(dev, where, &reg);
+	reg = (reg & size) | (((u32)(res->start - root->start)) & ~size);
+	pci_write_config_dword(dev, where, reg);
+}
+
+/*
+ *  Called after each bus is probed, but before its children
+ *  are examined.
+ */
+void __init pcibios_fixup_bus(struct pci_bus *b)
+{
+	pci_read_bridge_bases(b);
+}
+
 #endif /* CONFIG_PCI */
diff --git a/arch/mips/mips-boards/generic/time.c b/arch/mips/mips-boards/generic/time.c
index 84592fc2f..d5fdc5f6a 100644
--- a/arch/mips/mips-boards/generic/time.c
+++ b/arch/mips/mips-boards/generic/time.c
@@ -27,6 +27,7 @@
 #include <linux/init.h>
 #include <linux/kernel_stat.h>
 #include <linux/sched.h>
+#include <linux/spinlock.h>
 
 #include <asm/mipsregs.h>
 #include <asm/ptrace.h>
@@ -37,11 +38,13 @@
 #include <asm/mips-boards/generic.h>
 #include <asm/mips-boards/prom.h>
 
+extern volatile unsigned long wall_jiffies;
 static long last_rtc_update = 0;
 unsigned long missed_heart_beats = 0;
 
 static unsigned long r4k_offset; /* Amount to increment compare reg each time */
 static unsigned long r4k_cur;    /* What counter should be at next timer irq */
+extern rwlock_t xtime_lock;
 
 #define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5)
 
@@ -131,77 +134,79 @@ void mips_timer_interrupt(struct pt_regs *regs)
 {
 	int irq = 7;
 
-	if(r4k_offset != 0) {
-		do {
-			kstat.irqs[0][irq]++;
-			do_timer(regs);
-
-			/* Historical comment/code:
-	 		* RTC time of day s updated approx. every 11 
-	 		* minutes.  Because of how the numbers work out 
-	 		* we need to make absolutely sure we do this update
-	 		* within 500ms before the * next second starts, 
-	 		* thus the following code.
-	 		*/
-			if ((time_status & STA_UNSYNC) == 0 
-			&& xtime.tv_sec > last_rtc_update + 660 
-			&& xtime.tv_usec >= 500000 - (tick >> 1) 
-			&& xtime.tv_usec <= 500000 + (tick >> 1))
-			    if (set_rtc_mmss(xtime.tv_sec) == 0)
+	if (r4k_offset == 0)
+		goto null;
+
+	do {
+		kstat.irqs[0][irq]++;
+		do_timer(regs);
+
+		/* Historical comment/code:
+ 		 * RTC time of day s updated approx. every 11 
+ 		 * minutes.  Because of how the numbers work out 
+ 		 * we need to make absolutely sure we do this update
+ 		 * within 500ms before the * next second starts, 
+ 		 * thus the following code.
+ 		 */
+		read_lock(&xtime_lock);
+		if ((time_status & STA_UNSYNC) == 0 
+		    && xtime.tv_sec > last_rtc_update + 660 
+		    && xtime.tv_usec >= 500000 - (tick >> 1) 
+		    && xtime.tv_usec <= 500000 + (tick >> 1))
+			if (set_rtc_mmss(xtime.tv_sec) == 0)
 				last_rtc_update = xtime.tv_sec;
-			    else
+			else
 				/* do it again in 60 s */
-		    		last_rtc_update = xtime.tv_sec - 600; 
+	    			last_rtc_update = xtime.tv_sec - 600; 
+		read_unlock(&xtime_lock);
 
-			if ((timer_tick_count++ % HZ) == 0)
-			{
-			    mips_display_message(&display_string[display_count++]);
-			    if (display_count == MAX_DISPLAY_COUNT)
-			        display_count = 0;
-			}
+		if ((timer_tick_count++ % HZ) == 0) {
+		    mips_display_message(&display_string[display_count++]);
+		    if (display_count == MAX_DISPLAY_COUNT)
+		        display_count = 0;
+		}
 
-			r4k_cur += r4k_offset;
-			ack_r4ktimer(r4k_cur);
+		r4k_cur += r4k_offset;
+		ack_r4ktimer(r4k_cur);
 
-		} while (((unsigned long)read_32bit_cp0_register(CP0_COUNT)
-			- r4k_cur) < 0x7fffffff);
-	} else ack_r4ktimer(0);
+	} while (((unsigned long)read_32bit_cp0_register(CP0_COUNT)
+	         - r4k_cur) < 0x7fffffff);
+
+	return;
+
+null:
+	ack_r4ktimer(0);
 }
 
-static unsigned long cal_r4koff(void)
+/* 
+ * Figure out the r4k offset, the amount to increment the compare
+ * register for each time tick. 
+ * Use the RTC to calculate offset.
+ */
+static unsigned long __init cal_r4koff(void)
 {
-        unsigned long count;
-	unsigned long flags;
+	unsigned long count;
+	unsigned int flags;
 
-        /* 
-	 * Figure out the r4k offset, the amount to increment the compare
-	 * register for each time tick. 
-	 * Use the RTC to calculate offset.
-	 */
-	/* Disable Interrupts */
-	save_and_cli(flags);
+	__save_and_cli(flags);
 
 	/* Start counter exactly on falling edge of update flag */
-	while (CMOS_READ(RTC_REG_A) & RTC_UIP)
-		        ;
-	while (!(CMOS_READ(RTC_REG_A) & RTC_UIP))
-		        ;
+	while (CMOS_READ(RTC_REG_A) & RTC_UIP);
+	while (!(CMOS_READ(RTC_REG_A) & RTC_UIP));
 
 	/* Start r4k counter. */
 	write_32bit_cp0_register(CP0_COUNT, 0);
 
 	/* Read counter exactly on falling edge of update flag */
-	while (CMOS_READ(RTC_REG_A) & RTC_UIP)
-		        ;
-	while (!(CMOS_READ(RTC_REG_A) & RTC_UIP))
-		        ;
+	while (CMOS_READ(RTC_REG_A) & RTC_UIP);
+	while (!(CMOS_READ(RTC_REG_A) & RTC_UIP));
 
 	count = read_32bit_cp0_register(CP0_COUNT);
 
 	/* restore interrupts */
-	restore_flags(flags);
+	__restore_flags(flags);
 
-        return (count / HZ);
+	return (count / HZ);
 }
 
 static unsigned long __init get_mips_time(void)
@@ -241,7 +246,7 @@ static unsigned long __init get_mips_time(void)
 
 void __init time_init(void)
 {
-        unsigned int est_freq;
+        unsigned int est_freq, flags;
 
         /* Set Data mode - binary. */ 
         CMOS_WRITE(CMOS_READ(RTC_CONTROL) | RTC_DM_BINARY, RTC_CONTROL);
@@ -261,25 +266,133 @@ void __init time_init(void)
 	set_cp0_status(ST0_IM, ALLINTS);
 
 	/* Read time from the RTC chipset. */
+	write_lock_irqsave (&xtime_lock, flags);
 	xtime.tv_sec = get_mips_time();
 	xtime.tv_usec = 0;
+	write_unlock_irqrestore(&xtime_lock, flags);
+}
+
+/* This is for machines which generate the exact clock. */
+#define USECS_PER_JIFFY (1000000/HZ)
+
+/* Cycle counter value at the previous timer interrupt.. */
+
+static unsigned int timerhi = 0, timerlo = 0;
+
+/*
+ * FIXME: Does playing with the RP bit in c0_status interfere with this code?
+ */
+static unsigned long do_fast_gettimeoffset(void)
+{
+	u32 count;
+	unsigned long res, tmp;
+
+	/* Last jiffy when do_fast_gettimeoffset() was called. */
+	static unsigned long last_jiffies=0;
+	unsigned long quotient;
+
+	/*
+	 * Cached "1/(clocks per usec)*2^32" value.
+	 * It has to be recalculated once each jiffy.
+	 */
+	static unsigned long cached_quotient=0;
+
+	tmp = jiffies;
+
+	quotient = cached_quotient;
+
+	if (tmp && last_jiffies != tmp) {
+		last_jiffies = tmp;
+		__asm__(".set\tnoreorder\n\t"
+			".set\tnoat\n\t"
+			".set\tmips3\n\t"
+			"lwu\t%0,%2\n\t"
+			"dsll32\t$1,%1,0\n\t"
+			"or\t$1,$1,%0\n\t"
+			"ddivu\t$0,$1,%3\n\t"
+			"mflo\t$1\n\t"
+			"dsll32\t%0,%4,0\n\t"
+			"nop\n\t"
+			"ddivu\t$0,%0,$1\n\t"
+			"mflo\t%0\n\t"
+			".set\tmips0\n\t"
+			".set\tat\n\t"
+			".set\treorder"
+			:"=&r" (quotient)
+			:"r" (timerhi),
+			 "m" (timerlo),
+			 "r" (tmp),
+			 "r" (USECS_PER_JIFFY)
+			:"$1");
+		cached_quotient = quotient;
+	}
+
+	/* Get last timer tick in absolute kernel time */
+	count = read_32bit_cp0_register(CP0_COUNT);
+
+	/* .. relative to previous jiffy (32 bits is enough) */
+	count -= timerlo;
+
+	__asm__("multu\t%1,%2\n\t"
+		"mfhi\t%0"
+		:"=r" (res)
+		:"r" (count),
+		 "r" (quotient));
+
+	/*
+ 	 * Due to possible jiffies inconsistencies, we need to check 
+	 * the result so that we'll get a timer that is monotonic.
+	 */
+	if (res >= USECS_PER_JIFFY)
+		res = USECS_PER_JIFFY-1;
+
+	return res;
 }
 
 void do_gettimeofday(struct timeval *tv)
 {
-	unsigned long flags;
+	unsigned int flags;
 
-	save_and_cli(flags);
+	read_lock_irqsave (&xtime_lock, flags);
 	*tv = xtime;
-	restore_flags(flags);
+	tv->tv_usec += do_fast_gettimeoffset();
+
+	/*
+	 * xtime is atomically updated in timer_bh. jiffies - wall_jiffies
+	 * is nonzero if the timer bottom half hasnt executed yet.
+	 */
+	if (jiffies - wall_jiffies)
+		tv->tv_usec += USECS_PER_JIFFY;
+
+	read_unlock_irqrestore (&xtime_lock, flags);
+
+	if (tv->tv_usec >= 1000000) {
+		tv->tv_usec -= 1000000;
+		tv->tv_sec++;
+	}
 }
 
 void do_settimeofday(struct timeval *tv)
 {
-	cli();
+	write_lock_irq (&xtime_lock);
+
+	/* This is revolting. We need to set the xtime.tv_usec correctly.
+	 * However, the value in this location is is value at the last tick.
+	 * Discover what correction gettimeofday would have done, and then
+	 * undo it!
+	 */
+	tv->tv_usec -= do_fast_gettimeoffset();
+
+	if (tv->tv_usec < 0) {
+		tv->tv_usec += 1000000;
+		tv->tv_sec--;
+	}
+
 	xtime = *tv;
-	time_state = TIME_BAD;
-	time_maxerror = MAXPHASE;
-	time_esterror = MAXPHASE;
-	sti();
+	time_adjust = 0;		/* stop active adjtime() */
+	time_status |= STA_UNSYNC;
+	time_maxerror = NTP_PHASE_LIMIT;
+	time_esterror = NTP_PHASE_LIMIT;
+
+	write_unlock_irq (&xtime_lock);
 }
diff --git a/arch/mips/mips-boards/malta/Makefile b/arch/mips/mips-boards/malta/Makefile
index 5e8bede22..a5c7fdb13 100644
--- a/arch/mips/mips-boards/malta/Makefile
+++ b/arch/mips/mips-boards/malta/Makefile
@@ -1,6 +1,3 @@
-# $Id: Makefile,v 1.1 2000/07/07 10:22:15 carstenl Exp $
-#
-# Makefile
 #
 # Carsten Langgaard, carstenl@mips.com
 # Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
@@ -36,15 +33,10 @@
 .S.o:
 	$(CC) $(CFLAGS) -c $< -o $*.o
 
-OBJS  = malta_int.o malta_rtc.o malta_setup.o
-
-all: malta.a
+all: malta.o
 
-malta.a: $(OBJS)
-	$(AR) rcs malta.a $(OBJS)
-	sync
+O_TARGET := malta.o
 
-dep:
-	$(CPP) -M *.c > .depend
+O_OBJS := malta_int.o malta_rtc.o malta_setup.o
 
 include $(TOPDIR)/Rules.make